Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Pad-Mounted and Pole-Mounted Transformers

Active

International

Response Deadline11/05/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and delivery of one new pad-mounted transformer and one new pole-mounted transformer for the Correctional Service of Canada. The equipment must be delivered to the Beaver Creek Institution in Gravenhurst, Ontario, and must strictly adhere to all current Canadian electrical and safety standards as well as specific requirements set by the CSC and local utility providers. The project is managed under the Government of Canada and is designated for prime contractors overseeing facility projects. Interested parties should note the response deadline of November 5, 2026, for this procurement opportunity categorized under NAICS code 335311.

General Info

Manufacture and deliver two transformers to Beaver Creek Institution by November 5, 2026.

Agency

Government of Canada → Correctional Service of Canada

NAICS

335311 - Power, Distribution, and Specialty Transformer Manufacturing

Place of Performance

Canada, Ontario (except NCR), Gravenhurst, CAN

Set-Aside

NONE

Documents

This scope was carved out of 21443-27-5482359.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PCB Transformer Replacements at Beaver Creek Institution -Minimum

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineNov 5

Submission deadline

Response Deadline

11/05/2026, 07:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Correctional Service of Canada

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → Correctional Service of Canada

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies electrical transformers for prime contractors on Correctional Service of Canada facility projects. Manufactures and delivers one new Pad Mounted Transformer and one new Pole Mounted Transformer meeting CSC and local utility specifications. Equipment must meet current Canadian electrical and safety standards. Delivers two new transformers to Beaver Creek Institution.

Similar Contracts

Same NAICS industry code

27kV Automatic Vacuum Recloser SupplierThis subcontract agreement involves the supply of three electronically controlled, automatic three-phase, solid dielectric 27 kV vacuum circuit reclosers for prime contractors working on Peabody Municipal Light Plant projects in Peabody, Massachusetts. The required units must be manufactured with 800A continuous current, 12.5kA interrupting current, and 150kV BIL specifications. To ensure efficiency, the units must be preassembled in-factory with primary connector potential transformers and 2-hole lug pads before being delivered to the jobsite. The solicitation was posted on October 20, 2026, with a response deadline of November 5, 2026.

PMLP - Peabody Municipal Light Plant

POSTED

about 20 hours ago

DEADLINE

23kV Three-Phase Padmount Transformer SupplierThis subcontract opportunity is for a supplier to provide 23kV three-phase padmount distribution transformers for prime contractors working on Peabody Municipal Light Plant projects in Peabody, Massachusetts. The required units must be 60HZ, mineral oil immersed, class OA rated self-cooled, and compartmental-type, with ratings of 3000KVA or smaller. All equipment must be manufactured in accordance with IEEE C57.12.34 and IEEE C57.12.00 standards. The selected supplier is responsible for performing comprehensive testing, including no load, full load, impedance, and exciting current tests. Deliverables include the tested and certified transformers along with loss data reports and mandatory PCB Certification. Interested parties must respond by November 5, 2026.

PMLP - Peabody Municipal Light Plant

POSTED

about 20 hours ago

DEADLINE

THREE PHASE 23KV PADMOUNT TRANSFORMERS

Solicitation # BD-27-2082-PMLP-PMLP-134598

The Peabody Municipal Light Plant (PMLP) is soliciting bids for three-phase 23kV padmount transformers, specifically 60HZ, mineral oil immersed, class OA rated self-cooled, compartmental-type distribution transformers rated 3000KVA and smaller. The requirements include units with a primary voltage of 22,860 GRD Y / 13,200 volts and 125KV BIL insulation. Specific line items include 750 KVA, 1000 KVA, and 2000 KVA transformers with 480 Y / 277 secondary voltages and loop switches. All equipment must comply with the latest IEEE standard C57.12.34. The award process heavily weights transformer efficiency, requiring bidders to provide guaranteed maximum no-load and full-load losses, percent impedance, and detailed construction drawings. Bidders must provide firm pricing valid for 60 days, and those without upward escalator clauses are preferred. Deliveries must be made to the Peabody, Massachusetts jobsite between 08:00am and 03:00pm, with 72 hours' advance notice and packaging that allows for fork truck offloading from the rear. Payment is set at 100% of the quoted price within 30 days of delivery and inspection. Compliance requirements include adherence to the Occupational Safety and Health Act of 1970, PMLP safety rules, and Massachusetts tax laws under MGL c. 62C, §49A. Submissions must include a Certificate of Non-Collusion, tax compliance certification, and PCB certification prior to shipment.

PMLP - Peabody Municipal Light Plant

POSTED

about 20 hours ago

DEADLINE

Indicator Light (NIIN 016433600) SupplierThis subcontract, managed by the Department of Defense under the Navsup Weapon Systems Support Mech, involves the supply of indicator lights for prime contractors working on US Navy shipboard system projects. The supplier is responsible for manufacturing or sourcing NIIN 016433600 in accordance with TDP Version 004. A critical requirement of the contract is ensuring that all non-metallic materials comply with the toxicity and flammability standards specified in NAVSEA SS800-AG-MAN-010/P-9290. The scope of work includes providing Level I Special Emphasis quality assurance and a formal Certificate of Compliance alongside the delivery of the physical indicator lights. This opportunity falls under NAICS code 335311, with a response deadline set for November 24, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

61--CABLE ASSEMBLY,POWER,E

Solicitation # SPE4A627T5540

POSTED

DEADLINE

61--CABLE ASSEMBLY,POWER,E

Solicitation # SPE4A627T5633

POSTED

DEADLINE

61--WIRING HARNESS,BRANCHE

Solicitation # SPE4A627T5621

POSTED

DEADLINE

POWER UNIT, 6KVA

Solicitation # SPRMM126QMJ30

This solicitation, issued by DLA Mechanicsburg, is for the manufacture and delivery of five 6KVA Power Units (NIIN 016947045). The procurement is designated as a small business small purchase and will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria. The government will evaluate offers based on technical acceptability, price, and risk assessments via the Supplier Performance Risk System (SPRS). Delivery is required as soon as possible (ASAP) with FOB Destination terms. The contractor is responsible for all inspection and quality assurance, with both inspection and acceptance occurring at the origin. All items must be physically identified per MIL-STD-130 and packaged according to MIL-STD-2073, with specific packing levels based on the destination. Invoicing and receiving reports must be submitted electronically through the Wide Area Workflow (WAWF) system. Offerors who are not the original equipment manufacturer must provide the OEM's CAGE code and part number, and authorized distributors must provide proof of authorization on company letterhead.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

in about 8 hours

61--CABLE ASSEMBLY,SPECIAL

Solicitation # SPE4A627T5634

POSTED

DEADLINE

61--CABLE ASSEMBLY,SPECIAL

Solicitation # SPE4A627T5632

POSTED

DEADLINE

6150016591208, WIRING HARNESS,BRAN, WSDC: 01F MISSILE,MINUTEMANIII, LGM-30

Solicitation # SPE4A627R0056

Solicitation SPE4A627R0056 is a pre-solicitation notice issued by DLA Aviation for the procurement of a non-commercial wiring harness, part number 6150016591208, intended for the Minuteman III missile system. The government intends to award a non-commercial Firm Fixed Price contract under FAR Part 15, with the final decision based on a combination of price, past performance, and other evaluation factors. The solicitation is unrestricted and is expected to be released on November 4, 2026, via the DIBBS website. The requirement is for a stocked item with a requested delivery timeline of 444 days after receipt of order, with terms set as FOB Origin and inspection and acceptance occurring at destination. Surplus dealers, small business dealers, and distributors with existing stock are encouraged to respond by providing pricing, available quantities, and a completed surplus certificate or adequate traceability documentation. The Boeing Company is listed as an approved source for this material.

POSTED

DEADLINE

Electrical Equipment SupplyThis subcontract agreement involves the supply of utility-grade electrical equipment for prime contractors working on City of Long Beach utility projects. The scope of work includes the fabrication and delivery of dry-type transformers, switchgear, panelboards, and UL-listed circuit breakers. To ensure quality and compliance, the provider must submit manufacturer data and shop drawings that adhere to UL and ANSI/NEMA standards, with all specified equipment delivered directly to the project site in Long Beach, California. The opportunity was posted on October 20, 2026, with a response deadline of November 18, 2026. Classified under NAICS code 335311, this contract focuses on the manufacturing and distribution of essential electrical components to support municipal infrastructure improvements within the 90802 zip code area.

City of Long Beach

POSTED

DEADLINE

More opportunities from Government of Canada → Correctional Service of Canada

Same awarding agency

Electrical Site Restoration and Civil WorksThis subcontract for Electrical Site Restoration and Civil Works involves performing site restoration services for prime contractors at a Correctional Service of Canada facility located in Gravenhurst, Ontario. The primary scope of work focuses on restoring ground and pads following the removal of a 1975 pad-mounted transformer. The contractor is responsible for general site cleanup and ensuring all affected areas are returned to their original or better condition through the use of grading equipment and the application of concrete or gravel. The project falls under NAICS code 238990 and requires the delivery of a fully restored site area. Interested parties should note that the response deadline for this opportunity is November 5, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

PCB-Contaminated Equipment and Oil DisposalThis subcontract involves hazardous waste remediation for prime contractors working on Correctional Service of Canada facility projects in Gravenhurst, Ontario. The scope of work specifically requires the handling, transportation, and disposal of one pole-mounted transformer and one pad-mounted transformer containing 172 ppm PCB, along with all associated contaminated oil. The selected provider must hold all necessary federal and provincial hazardous waste permits and ensure strict compliance with the Canadian Environmental Protection Act and PCB Regulations. Upon completion of the services, the contractor is required to deliver official certificates of disposal and destruction.

Remediation Services

POSTED

DEADLINE

High Voltage Transformer Installation and ESA CertificationThis subcontract involves the installation of high voltage electrical infrastructure for Correctional Service of Canada facility projects located in Gravenhurst, Ontario. The scope of work includes the removal of one pad-mounted and one pole-mounted transformer, the installation of new units, and the provision of temporary heating and power. The contractor is responsible for coordinating all outages and re-energization efforts with the local utilities and the agency to deliver fully commissioned, ESA-certified transformers. Qualified bidders must provide personnel with 309A electrical certifications and High Voltage Qualified Electrical Worker (TQE) status. The solicitation was posted on October 20, 2026, with a response deadline of November 5, 2026. This project falls under NAICS code 238210 and is managed through the Government of Canada.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

PCB Transformer Replacements at Beaver Creek Institution -Minimum

Solicitation # 21443-27-5482359

Correctional Service Canada requires the removal and replacement of two transformers at the Beaver Creek Institution (Minimum) in Gravenhurst, Ontario, to ensure compliance with the Canadian Environmental Protection Act and PCB Regulations. The project involves replacing one pad-mounted transformer with a PCB concentration of 172 ppm and one pole-mounted transformer that has reached the end of its service life. All work, including the supply and installation of new units, the regulated disposal of PCB-contaminated equipment and oil, electrical outage coordination, and site restoration, must be completed by December 31, 2026. The selected contractor must provide technicians with valid 309A electrical and high voltage Qualified Electrical Worker (TQE) certifications and obtain Electrical Safety Authority (ESA) sign-off. Due to the institutional setting, personnel will be escorted at all times, must adhere to strict search protocols, and may be required to provide tuberculosis testing results. The contractor is responsible for providing all necessary high voltage personal protective equipment and aerial work platforms. Evaluation is based on mandatory technical criteria and a history of past work-related projects, with a requirement for commercial general liability insurance covering completed operations for six years beyond the project's completion.

POSTED

DEADLINE

Salt and Sand SupplyThis subcontract involves the supply and delivery of bulk road salt and sand for prime contractors working on Correctional Service Canada facility projects in St. John's, Newfoundland and Labrador. The selected provider is responsible for hauling industry-standard de-icing materials to designated sites or staging areas using dump trucks. Due to the nature of the location, all drivers must strictly adhere to institutional security and escort protocols when making deliveries directly to the CSC site. This opportunity is managed under the Government of Canada and is categorized under NAICS code 423840.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Snow Clearing and Ice Control ServicesThis subcontract for Snow Clearing and Ice Control Services involves providing comprehensive winter maintenance for prime contractors at the St. John’s Community Correctional Center under the Correctional Service of Canada. The scope of work includes clearing snow from parking lots and associated areas using plows and blowers, as well as implementing sanding and salting measures to ensure a safe, ice-free environment. The service provider must maintain 24/7 availability and strictly adhere to all institutional security protocols and scent-free requirements mandated by the facility. This project is located in Newfoundland and Labrador, with a response deadline set for October 30, 2026.

Other Services to Buildings and Dwellings

POSTED

DEADLINE

Snow Removal Services – St. John’s CCC

Solicitation # 21201-27-5544622

The Correctional Service of Canada is soliciting bids for comprehensive snow clearing, removal, sanding, salting, and ice control services at the St. John’s Community Correctional Center located at 86 Charter Avenue, St. John’s, Newfoundland and Labrador. The contract begins on December 1, 2026, and runs through April 30, 2027, with the option for four additional one-year renewals. The selected contractor must provide all necessary labor, equipment, and materials, maintaining a 24/7 contact number and commencing work within two hours of notification. Key operational requirements include clearing parking areas before 0600 hours and initiating snow removal once accumulation reaches six centimeters. All equipment must be equipped with backup alarms and rotating amber warning lights. This procurement is open to Canadian suppliers and applicable trading partners, with a conditional set-aside for Indigenous businesses under the Procurement Strategy for Indigenous Business if two or more responsive bids are received. The contract will be awarded to the lowest priced compliant bid that meets all mandatory technical criteria and experience requirements. Contractors must maintain Commercial General Liability Insurance of at least 2,000,000 dollars and adhere to strict institutional security protocols, including being escorted by staff at all times and completing tuberculosis testing. Invoicing must be submitted electronically and follow specific professional formatting requirements to be eligible for payment via direct deposit or MasterCard purchase card.

Landscaping Services

POSTED

DEADLINE

Psychological Risk Assessment Services (Psychologist) – Ontario Region

Solicitation # 21120-26-5297472

The Correctional Service of Canada is seeking professional psychological risk assessment services for the Ontario Region to support offender case management and evidence-based decision-making. The contract covers multiple locations, including the Joyceville, Collins Bay, Bath, and Grand Valley Complexes, as well as Millhaven, Warkworth, and Beavercreek Institutions and the Regional Treatment Centre. The selected contractor will perform structured and unstructured risk assessments, provide professional opinions, and participate in case conferences and investigative processes. All services must be delivered in English and comply with the Canadian Code of Ethics for Psychologists, CSC policies, and the National Essential Health Services Framework, with a specific requirement to be responsive to the needs of women and Indigenous People. The contract period runs from January 16, 2027, to January 15, 2030. Award is based on the lowest priced compliant bid among responsive bidders who meet all mandatory technical criteria and insurance requirements, including a minimum of 2 million dollars in Commercial General Liability coverage. Security is a critical component, requiring the contractor to maintain a valid Designated Organization Screening and for personnel to hold Reliability Status. The scope includes an estimated 120 risk assessments over three years, with payments made monthly via direct deposit or MasterCard Acquisition Card. Bidders must be Canadian suppliers, and the procurement is not subject to trade agreements or Indigenous set-asides.

Offices of Mental Health Practitioners (except Physicians)

POSTED

DEADLINE

Confined Space Vocational Training ProviderThis subcontract involves providing Energy Safety Canada Certified Confined Space training for prime contractors working on Correctional Service of Canada facility projects located in Alberta. The selected provider must deliver a minimum of six hours of combined classroom and practical instruction for groups of up to 15 participants, ensuring that all attendees receive official Energy Safety Canada certification upon completion. The provider is responsible for supplying all necessary curriculum, training manuals, and personal protective equipment. To qualify, the provider must hold Energy Safety Canada certification, and instructors are required to have a proven track record of delivering at least six courses within the last three years.

Other Technical and Trade Schools

POSTED

DEADLINE

H2S Alive Vocational Training ProviderThis subcontract involves providing Energy Safety Canada Certified H2S Alive vocational training for prime contractors working on Correctional Service of Canada facility projects located in Alberta. The selected provider must deliver a minimum of six hours of classroom and practical instruction for groups of up to 15 participants, ensuring all students receive official Energy Safety Canada certification upon completion. The provider is responsible for supplying all necessary curriculum, manuals, and personal protective equipment. To qualify, the provider must hold Energy Safety Canada certification, and instructors are required to have delivered at least six courses within the last three years. This opportunity was posted by the Government of Canada on October 15, 2026, with a response deadline of November 5, 2026.

Other Technical and Trade Schools

POSTED

DEADLINE

Safety Vocational Training - H2S Alive and Confined Space

Solicitation # 21C50-27- 5406568

The Correctional Service of Canada requires a contractor to provide Energy Safety Canada Certified vocational training in H2S Alive and Confined Space for offenders at various institutions in Alberta. The objective is to facilitate community reintegration by providing industry-recognized certifications. The work is divided into three streams: Alberta South, Alberta Central, and Grande Cache, covering facilities ranging from minimum to maximum security. The contract runs from the date of award until January 31, 2028, with an option for two additional one-year renewals. The selected contractor must provide certified instructors who have each delivered at least six courses in the respective subject area within the last three years. Deliverables include all training materials, personal protective equipment, and certificates for successful participants. Each course must be at least six hours long with a maximum of 15 participants. The contractor is responsible for providing a comprehensive tool list two weeks before training begins and must maintain commercial general liability insurance of at least 2 million dollars. This procurement is open only to Canadian suppliers and is conditionally set-aside under the Procurement Strategy for Indigenous Business if two or more responsive bids are received from Indigenous businesses. Award is based on the lowest priced compliant bid per stream. Bidders must hold a valid organization security clearance and ensure all proposed personnel meet the necessary security requirements for the correctional facilities.

Other Technical and Trade Schools

POSTED

DEADLINE

Site Restoration ServicesThis subcontract for Site Restoration Services involves restoring disturbed areas for prime contractors at Correctional Service of Canada facilities located in Kingston. The scope of work focuses on the grading and sodding of areas adjacent to new sidewalk construction, utilizing hand tools and sod cutters to deliver a fully restored landscape. Due to the nature of the facility, all personnel assigned to the project must successfully complete security screenings and tuberculosis testing. The opportunity was posted on October 14, 2026, with a response deadline of November 10, 2026.

Landscaping Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS