Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Piston and Shoe Assembly (NSN: 4320-01-228-5301)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Defense Logistics Agency under the Department of Defense, requires the manufacture and delivery of 190 commercial piston and shoe assemblies, identified by NSN 4320-01-228-5301. The scope of work encompasses the entire production lifecycle, including quality assurance and packaging, to ensure all units meet strict military standards before being delivered to a designated U.S. Department of Defense depot. Classified under NAICS code 332991, the agreement focuses on the precise fabrication and supply of these components. The contract was posted on June 29, 2026, and mandates full compliance with government specifications to support defense logistics operations.

General Info

DLA subcontract for manufacturing and delivering 190 commercial piston and shoe assemblies.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332991 - Ball and Roller Bearing Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-T-174F.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PISTON AND SHOE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 29

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture, quality assurance, packaging, and delivery of 190 units of a commercial piston and shoe assembly to a U.S. Department of Defense depot in compliance with military standards.

Similar Contracts

Same NAICS industry code

Supply of Sleeve Bearings (NSN 3120005656785)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Fluid Filter Elements (NSN 4330015342361)

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

Supply of Needle Roller Bearings (NSN 3110-00-227-2870)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Thrust Washer Bearings (NSN 3120-00-466-0472)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Plain Rod End Bearings

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Annular Ball Bearings (NSN 3110-00-184-0039)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

BEARING, WASHER, THRUST

Solicitation # SPE4A6-27-T-7499

Solicitation SPE4A6-27-T-7499 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 475 units of thrust washer bearings, identified by NSN 3120-00-466-0472. The contract is established as a fixed-price supply agreement with delivery terms set as FOB Origin and a delivery timeline of 171 days after the order is placed. The required delivery date is August 18, 2027, with a need ship date of April 27, 2027. Supplies are to be delivered to DLA Distribution San Joaquin in Tracy, California, where both inspection and acceptance will take place. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List and specifies packaging and marking standards according to MIL-STD-2073-1E and MIL-STD-129. Bare item marking must include the contract number, NAWC CAGE, and part number. Notably, the use of mercury or mercury-containing compounds is prohibited in the hardware and packaging. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and various FAR/DFARS clauses regarding cybersecurity, hazardous material labeling, and the HUBZone price evaluation preference.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

BEARING, PLAIN, ROD END

Solicitation # SPE4A6-27-T-7520

Solicitation SPE4A6-27-T-7520 is issued by the DLA Weapons Support ASC Commodities Division for the procurement of plain rod end bearings, identified by NSN 3120-01-01-92502 and part number BACB10Y4T. The requirement consists of 120 units with a delivery window of 171 days after order. This is a source-controlled item that must be manufactured and tested according to cited limited rights data, and only vendors with access to this data or traceability to approved sources, such as The Boeing Company or RBC Corp, are eligible to quote. The item is designated as a critical application item, and all Class 3A and 3B threads must be gaged per SAE AS8879 or MIL-S-7742. The contract mandates strict adherence to quality and packaging standards, including MIL-DTL-197M for preservation, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Inspection and acceptance will occur at the origin, and manufacturers must maintain an inspection system compliant with SAE AS9003 or ISO 9001. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act and safeguarding covered defense information. Delivery is set as FOB Origin, with the primary shipping destination being the DLA Distribution DDSP New Cumberland Facility.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

BEARING, PLAIN, ROD END

Solicitation # SPE4A6-27-T-7517

This small business set-aside solicitation, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of 26 plain rod end bearings (NSN 3120-00-516-0304, Part Number 755057-1). The requirement is designated as a critical application item and must adhere to specific configuration control and technical standards, including the use of cited drawings and the requirement that all Class 3A and 3B threads be gaged per SAE AS8879 or MIL-S-7742. Acceptable sources include RBC Southwest Products, Sargent Aerospace & Defense, and New Hampshire Ball Bearing. The delivery is scheduled for DLA Distribution Warner Robins, with a need ship date of April 27, 2027, and offers must be submitted based on FOB Origin under the First Destination Transportation program. Quality assurance is strictly governed by SAE AS9003 or ISO 9001 standards, with inspection and acceptance occurring at the origin per FAR 52.246-2. Packaging and preservation must comply with MIL-STD-2073-1E and MIL-DTL-197M, while item identification and marking must follow MIL-STD-130N and MIL-STD-129. The contract incorporates various federal and defense clauses, including the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity requirements. Invoicing and payment processing are required through the Wide Area Workflow system. Quotations are due by November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

BEARING, BALL, ANNULAR

Solicitation # SPE4A6-27-T-7523

Solicitation SPE4A6-27-T-7523, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of annular ball bearings (NSN 3110001840039). The requirement consists of two line items totaling 60 units, identified as Commercial Off The Shelf (COTS) critical application items. Deliveries are set as FOB Origin with a required delivery date of August 29, 2027, and a delivery window of 171 days. Technical compliance is governed by TDP Rev B Gen 2, specifically Basic CID A-A-59583D and Reference QAP 13873. Strict sourcing and quality mandates apply, including the restriction on the acquisition of ball and roller bearings, which requires the bearings to be manufactured in the United States, its outlying areas, or Canada, with at least 50% of the component cost originating from these regions. Offerors must provide a Contractor's Declaration on the domestic or foreign nature of the material to be considered for award. Quality assurance requires the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Packaging and marking must adhere to MIL-DTL-197M, MIL-STD-2073-1E, and MIL-STD-129, with specific prohibitions against the intentional addition of mercury. The contract incorporates various FAR and DFARS clauses, including those for HUBZone small business preferences, safeguarding covered defense information, and the Buy American Act. Invoicing and payment must be processed through the Wide Area WorkFlow (WAWF) system. Quotations are due by November 6, 2026, via the DLA Internet Bid Board System (DIBBS).

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

BEARING, BALL, ANNULAR

Solicitation # SPE4A6-27-T-7535

Solicitation SPE4A6-27-T-7535 is for the procurement of 68 annular ball bearings, specifically Timken Co 21335 P/N 7308WN, identified as critical application items. The requirement specifies that these bearings must adhere to TDP Rev A Gen 1 and Reference QAP 13873 QAP-B02 Revision NR B. Delivery is required by July 27, 2027, with a need ship date of April 27, 2027, and shipping is based on FOB Origin to Tinker AFB, Oklahoma. Inspection and acceptance will occur at the destination. A critical sourcing restriction applies under DFARS 252.225-7016, requiring that the bearings be manufactured in the United States, its outlying areas, or Canada, with the cost of domestic components exceeding 50% of the total component cost. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials. Packaging and preservation must comply with MIL-DTL-197M and MIL-STD-2073-1E, with marking following MIL-STD-129. Payment and invoicing will be processed electronically through the Wide Area WorkFlow system. The procurement is managed by the DLA Weapons Support ASC Commodities Division, with Cynthia Conner serving as the primary point of contact.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

BEARING, SLEEVE

Solicitation # SPE4A6-27-T-7496

Solicitation SPE4A6-27-T-7496 is a request for the procurement of five sleeve bearings, identified by NSN 3120005656785, for the Defense Logistics Agency Weapons Support ASC Commodities Division. The required delivery date is November 2, 2026, with a delivery timeframe of five days after receipt of the order. The contract is established as FOB Origin, with both inspection and acceptance occurring at the origin. Shipping is coordinated through New York Forwarding Services Inc for final delivery to the King Abdulaziz Naval Base in Riyadh, Saudi Arabia. The contractor must adhere to strict quality and packaging standards, including MIL-STD-129 for marking and RP001 for DLA packaging requirements. Sampling must follow MIL-STD-1916 or ASQ H1331, with specific verification levels and AQLs assigned to critical, major, and minor attributes. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and prohibitions on certain telecommunications equipment. Offerors must provide representations regarding their small business status and validate their information within the System for Award Management.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Lead-Acid Sealed Gel Electrolyte Storage Battery Supply

Battery Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Plastic Press Strips

Commercial and Service Industry Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of NSN 4820013550268

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 1 hour ago

DEADLINE

Polyurethane Coating Material Supplier

Paint and Coating Manufacturing

POSTED

about 1 hour ago

DEADLINE

Pneumatic Tire Valve Supplier

Other Support Activities for Air Transportation

POSTED

about 1 hour ago

DEADLINE

Supply of Critical Application Check Valves (NSN 4820014168804)

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 1 hour ago

DEADLINE

PLASTIC STRIP, PRESS

Solicitation # SPE8E5-27-T-0390

Solicitation SPE8E5-27-T-0390 is a small business set-aside request for quotation issued by the Defense Logistics Agency for the procurement of one plastic press strip, identified by NSN 9330-01-679-0943. The item is subject to a non-extendable shelf life of 36 months and must be delivered FOB Origin to Hattiesburg, Mississippi, within 20 days after the order is placed, with an original required delivery date of March 30, 2026. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Due to the nature of the technical data, the item is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA training. Compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity reporting requirements is mandatory. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

Plastics Material and Resin Manufacturing

POSTED

about 1 hour ago

DEADLINE

LIGHT, ULTRAVIOLET, D

Solicitation # SPE8E6-27-T-0477

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 1 hour ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-27-Q-0169

POSTED

about 1 hour ago

DEADLINE

CONTAINER, FREIGHT, UTIL

Solicitation # SPE8ED-27-Q-0082

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8E5-27-Q-0044

POSTED

about 1 hour ago

DEADLINE

STEM, FLUID VALVE

Solicitation # SPE7MC-27-T-1324

Solicitation SPE7MC-27-T-1324 is a small business set-aside request for quotations issued by the Defense Logistics Agency Weapons Support Maritime Hardware/Electrical for one fluid valve stem, identified by NSN 4820-01-355-0268. The requirement specifies a delivery timeline of 20 days after the order, with shipping terms set as FOB Destination to the USS North Carolina SSN 777. The award may be processed via automated award, and a price evaluation preference is available for HUBZone small business concerns. The contract imposes strict technical and security requirements, including compliance with CMMC Level 2 and DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification. Quality standards mandate that the manufacturer's inspection system comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Sleeve Bearing Supply (NSN 3120-00-271-1539)

Defense Logistics Agency

POSTED

DEADLINE

Supply of Roller Bearings for Defense Logistics

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-506R

Defense Logistics Agency

POSTED

CLOSED

CUP, TAPERED ROLLER

Solicitation # SPE4A6-26-T-01YU

Defense Logistics Agency

POSTED

CLOSED

PARTS KIT, BEARING R

Solicitation # SPE4A6-26-T-98M1

Defense Logistics Agency

POSTED

CLOSED

NOZZLE, FUEL AND OIL SE

Solicitation # SPE8EE-26-T-2018

Defense Logistics Agency

POSTED

CLOSED

BUSHING, SLEEVE

Solicitation # SPE4A6-26-T-78P7

Defense Logistics Agency

POSTED

DEADLINE

BEARING, SLEEVE

Solicitation # SPE4A6-26-T-95D5

Defense Logistics Agency

POSTED

DEADLINE

BEARING, SLEEVE

Solicitation # SPE4A6-26-T-01YZ

Defense Logistics Agency

POSTED

CLOSED

Solicitation # SPE7M3-26-T-3959

Defense Logistics Agency

POSTED

DEADLINE

BEARING, PLAIN, SPHER

Solicitation # SPE4A6-26-T-01ZL

Defense Logistics Agency

POSTED

CLOSED

BEARING, BALL, ANNULA

Solicitation # SPE4A6-26-T-17N0

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS