Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Plain Encased Seals

Active

Federal

Response Deadline10/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through the Department of Defense Strategic Acquisition Program Directorate involves the supply of 655 critical application plain encased seals for DLA Land and Maritime prime contractors. The required items must follow NSN 5330218774350 and utilize authorized part numbers from either General Dynamics Land Systems Canada or SKF USA. All deliverables must adhere to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. Additionally, the supplier must certify that all provided items are free of Class I ozone-depleting chemicals and asbestos. The contract falls under NAICS code 332510.

General Info

DoD subcontract for 655 critical application seals following NSN 5330218774350 specifications.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7LX-26-U-004W.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAL, PLAIN ENCASED

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 17

subcontract

Response DeadlineOct 2

Submission deadline

Response Deadline

10/02/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies Plain Encased Seals for prime contractors on DLA Land and Maritime supply contracts. Provides NSN 5330218774350 using authorized part numbers from SKF USA or General Dynamics Land Systems - Canada. Performs packaging and marking per MIL-STD-2073-1E and MIL-STD-129. Certifies items as asbestos-free and free of Class I ozone-depleting chemicals. Delivers 655 units of critical application seals.

Similar Contracts

Same NAICS industry code

HARDWAREThe Department of Justice, through Federal Prison Industries, has issued a forecast for the procurement of hardware components under the NAICS code 332510. This opportunity is designated as Full and Open/Unrestricted, meaning it is available to all qualified bidders regardless of business size or set-aside status. The forecast was posted on September 20, 2026. Interested parties can coordinate with Stacey Phipps as the primary point of contact or Robert L. Connolly for small business specific inquiries. Further details regarding this opportunity are available through the Department of Justice forecast contracting portal.

Inc Federal Prison Industries

POSTED

about 14 hours ago

DEADLINE

Manufacturing and Supply of ForceMate Bushings for 155mm M284 CannonThis subcontract involves the manufacturing and supply of precision-machined ForceMate bushings for the 155mm M284 Cannon, supporting prime contractors on US Army Watervliet Arsenal projects. The contractor is responsible for delivering 1,358 physical bushings and all required contract data to Watervliet Arsenal in New York. Production must strictly adhere to Drawing 11583060 Rev B and Drawing 11583052 Rev B, corresponding to FTI Part numbers FMB-1602-45020C and FMB-1603-45010C. The project is governed by NAICS code 332510 and falls under the Department of Defense. Compliance with DPAS Priority Rating DO-A5 and CDRL DD FORM 1423 is mandatory. The solicitation was posted on September 19, 2026, with a response deadline of September 23, 2026.

POSTED

DEADLINE

ForceMate Bushings per Drawing for Watervliet Arsenal, NY

Solicitation # W911PT26QA165

The U.S. Army Tank-Automotive and Armaments Command (TACOM), Watervliet Arsenal is soliciting quotes for a firm fixed price purchase order to procure ForceMate Bushings for 155mm M284 Cannons. The requirement consists of 1,136 bushings per Drawing 11583060, Rev B (split between CLINs 0001 and 0002) and 222 bushings per Drawing 11583052, Rev B (CLIN 0003). The contract is unrestricted under NAICS code 332510 for Hardware Manufacturing. Delivery is FOB Destination to Watervliet Arsenal in New York, with a required delivery date on or before November 30, 2026. Award will be granted to the eligible offeror providing the lowest evaluated bid that meets all material requirements and responsibility criteria under FAR 9.104. To be eligible, offerors must have an active registration in the System for Award Management (SAM) and maintain a valid Joint Certification Program (JCP) record to access the militarily critical technical data and drawings. All responses must be submitted electronically via email to the contracting officer by September 23, 2026, at 4:00 PM Eastern Time. The contractor must utilize the Wide Area WorkFlow (WAWF) system for invoicing and adhere to strict DoD marking and identification standards, including the use of two-dimensional data matrix symbology for unique item identifiers.

POSTED

DEADLINE

Supply of Mounting Brackets (NSN 5340015375520)This subcontract with the Department of Defense Land Supply Chain ESOC Buys involves the procurement of eight mounting brackets, part number 3576147, under NSN 5340015375520. The project requires strict adherence to the Buy American and Balance of Payments Program as specified in DFARS 252.225-7001. Performance of the contract will take place in Texarkana, Texas. The supplier must ensure all units are packaged and labeled in accordance with MIL-STD-129 and RP001 standards. Additionally, the contractor is required to comply with RQ011 regarding the removal of government identification. The solicitation was posted on September 18, 2026, with a response deadline of September 23, 2026, falling under NAICS code 332510.

LAND SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Bail Handles (NSN 5340014685537)This subcontract involves the manufacture or sourcing of two bail handles under NSN 5340014685537 for prime contractors supporting Department of Defense Land Supply Chain contracts. The provider must ensure all items are produced or sourced in compliance with the Buy American Act and Berry Amendment domestic requirements. The contract specifies strict adherence to technical standards, including commercial packaging per ASTM D3951, marking per MIL-STD-129, and palletization according to RP001. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332510.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Helical Compression Spring SupplierThis subcontract opportunity with the Department of Defense Land Supply Chain involves the manufacture or sourcing of 20 helical compression spring seats. The supplier must adhere to the technical requirements specified in NSN 5340015160941 and the DLA Master List, utilizing equipment capable of maintaining precise tolerances. All deliverables must be packaged and marked according to MIL-STD-129 standards. The project is categorized under NAICS code 332510 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 23, 2026, to support prime contractors delivering these essential components for DLA supply contracts.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Drawer Slide Section ManufacturingThis subcontract for the Department of Defense Land Supply Chain agency involves the manufacturing of Slide Section, Drawer, E components. The selected provider will be responsible for precision machining, fabrication, and quality control inspections to ensure all parts meet strict technical specifications and government standards. Production will require the use of CNC machining, metal fabrication equipment, or precision stamping tools to deliver finished components. The project is categorized under NAICS code 332510 and will be performed in Patuxent River, Maryland. Interested parties must respond by September 23, 2026, following the posting date of September 18, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Angle Bracket SupplyThis subcontract involves the supply of angle brackets for prime contractors supporting the Department of Defense Land Supply Chain agency. The selected provider is responsible for manufacturing or sourcing brackets that strictly adhere to technical specifications and the DLA Master List of Technical and Quality Requirements. All deliverables must be marked and labeled according to MIL-STD-129 and packaged using ASTM D3951 and RP001 commercial standards, with final delivery including all necessary documentation and Safety Data Sheets. The project is categorized under NAICS code 332510 and will be performed in Port Hueneme, California. Interested parties must respond by September 23, 2026, following the posting date of September 18, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Bimetallic Self-Indicating ThermometersThis subcontract through the Department of Defense ASC Supplier Oper OEM Division involves the procurement or manufacture of 137 bimetallic, self-indicating thermometers for prime contractors. The units must adhere to commercial specifications and federal acquisition standards, with a specific requirement for compliance regarding hazard warning labels and notices of radioactive materials. The project is categorized under NAICS code 332510 and is to be performed in Jacksonville, Florida. The solicitation was posted on September 18, 2026, with a response deadline of September 23, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacturing of Helical Compression SpringsThis subcontract with the Department of Defense Land Supply Chain involves the precision manufacture of helical compression springs, identified by NSN 5360-00-791-1046. Production must strictly adhere to Technical Data Package Rev A Gen 1 and Basic Drawing NR 16236, utilizing specialized winding and coiling machinery to ensure all items meet specified tolerances and material requirements. Eligible providers must be registered with a CAGE code and provide certification of compliance with the Buy American Act. The opportunity falls under NAICS code 332510, with a response deadline set for October 3, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L5-26-T-4732

Solicitation SPE7L5-26-T-4732, issued by DLA Land and Maritime, is a request for quotations for angle brackets identified by NSN 5340016060220 and Oshkosh Defense LLC part number 3813187. The requirement consists of two line items totaling four units, with a delivery timeline of 88 days after order. The need ship date is November 10, 2026, with an original required delivery date of January 25, 2027. Delivery is primarily directed to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, though some documentation also references DLA Distribution Barstow in California. The contract specifies that inspection and acceptance will occur at the destination. Packaging must adhere to ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, with all palletization following RP001 and marking complying with MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. This procurement is categorized under NAICS code 332510 and incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, cybersecurity safeguarding under DFARS 252.204-7012, and the prohibition of trafficking in persons.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Solicitation # SPE4A6-26-U-4340

This solicitation, issued by the DLA Aviation ASC Commodities Division, is for an indefinite-quantity contract to supply blind rivets, specifically part number NAS1921B04-06 (NSN 5320010453010). The estimated annual quantity is 1,023 units, with a guaranteed contract minimum of 102 units and a maximum contract value of 350,000.00 dollars. Delivery is required within 69 days, with terms set as FOB Origin and both inspection and acceptance occurring at the destination. The items are identified as commercial products and must be manufactured according to the current revision of the NAS1921 part standard. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-130N for identification marking and ASTM D3951 for packaging, though DLA Master List requirements take precedence. Marking and labeling must comply with MIL-STD-129, and palletization must follow RP001. Manufacturers must maintain an inspection system complying with SAE AS9003 or ISO 9001. Additionally, the contract requires compliance with the Buy American Act and the Berry Amendment, with a reduced threshold of 150,000 dollars. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

INSULATION, VEHICULAR

Solicitation # SPE7LX-26-U-9912

Solicitation SPE7LX-26-U-9912 is an indefinite delivery contract issued by the DLA Land and Maritime Strategic ACO Program Directorate for the procurement of vehicular insulation, identified by NSN 2540-01-491-1356. The requirement is for an estimated quantity of 40 units with a contract maximum value of 350,000 dollars. The delivery timeline is set at 80 days after receipt of order, with shipping terms established as FOB Origin under the First Destination Transportation program. Both inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001, with DLA Master List requirements taking precedence over ASTM D3951. Hazardous materials must be handled according to FED-STD-313 and TQ requirement IP025. Offerors must comply with domestic sourcing regulations, including the Buy American Act and the Berry Amendment, and must be registered in the System for Award Management. Evaluation for award is based on the price quoted for individual items, and the use of additive manufacturing is prohibited unless specifically authorized. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

DEADLINE

CYLINDER ASSEMBLY, HYDR

Solicitation # SPE7LX-26-U-9914

Solicitation SPE7LX-26-U-9914 is a total small business set-aside for the procurement of hydraulic brake master cylinder assemblies, identified by NSN 2530-01-568-5097. This indefinite-quantity, indefinite-delivery contract is issued by the Department of Defense through the DLA Strategic Acquisition Program Directorate, with a maximum contract value of 350,000 dollars. The primary requirement is for an estimated quantity of 42 units, with a delivery window of 75 days after the order is received. The item is designated as a critical application item, with referenced part numbers from Robert Bosch LLC and AM General LLC. The contract specifies FOB Origin shipping terms, with both inspection and acceptance occurring at the destination. Packaging and marking must strictly adhere to MIL-STD-129 and DLA packaging requirements, including specific preservation and cushioning codes. Invoicing and payment are to be processed electronically via the Wide Area WorkFlow system. Compliance with the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity standards is required. All quotes must be submitted through the DLA Internet Bid Board System.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

Supply of Plain Encased Seals (NSN 5330007400356)This subcontract under the Department of Defense Strategic Acquisition Program Directorate involves the supply of 542 plain encased seals for prime contractors on Defense Logistics Agency supply contracts. The required components must be manufactured or sourced as seals with a steel case and synthetic rubber element, adhering to specific dimensions of a 0.625 inch shaft diameter, 0.811 inch bore diameter, and 0.093 inch width. All units must strictly match the Federal-Mogul Corp Government part number 340387 specifications and correspond to NSN 5330007400356. The opportunity is designated as a total Small Business Set Aside under NAICS code 332510. Interested parties must submit their responses by the deadline of October 2, 2026. This procurement ensures the availability of critical sealing components necessary for government supply chain operations.

Hardware Manufacturing

POSTED

DEADLINE

Rudder Bearing Seal Supply (NSN 5330010383914)This subcontract involves the manufacture or sourcing of specialized rudder bearing seals, specifically part NSN 5330010383914, to support prime contractors delivering DLA Land and Maritime supply contracts. The selected provider is responsible for ensuring all items are marked and labeled according to MIL-STD-129 and packaged in compliance with RP001 DLA Packaging Requirements for Procurement before delivery to the designated DoDAAC shipping location. Managed by the Strategic Acquisition Program Directorate within the Department of Defense, this opportunity is designated as a total Small Business Set Aside under NAICS code 332999. The solicitation was posted on September 18, 2026, with a response deadline of October 2, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

53--SEAL,BEARING,RUDDER

Solicitation # SPE7LX-26-U-004Z

Solicitation SPE7LX-26-U-004Z is a request for quotations issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of rudder bearing seals under NSN 5330010383914. This is a total small business set-aside that may result in a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 and a term of one year. The estimated annual quantity is four units, with a guaranteed minimum of one. Delivery is required within 97 days after the order is placed, with shipping terms set as FOB Origin to various CONUS and OCONUS DLA depots. The procurement requires strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination. Offerors must submit quotes electronically by October 2, 2026. The contract incorporates various FAR and DFARS clauses, including requirements for the Buy American Act, the Berry Amendment, and safeguarding of covered defense information. Payment and invoicing must be processed through the Wide Area Workflow system. Additive manufacturing is prohibited unless specifically authorized, and any alternate part offers must be accompanied by a complete data package for evaluation.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

53--SEAL,PLAIN ENCASED

Solicitation # SPE7LX-26-U-004Y

Solicitation SPE7LX-26-U-004Y is a request for quotations issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of plain encased seals, NSN 5330007400356. This total small business set-aside under NAICS 339991 may result in a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 and a term of one year. The procurement includes an estimated annual demand of 542 units with a guaranteed minimum quantity of 81. The seals must feature a steel case and synthetic rubber element with a 0.625 inch shaft diameter, 0.811 inch bore diameter, and 0.093 inch width, capable of a 1000 feet per minute surface speed. Approved sources include Federal-Mogul Corp Government P/N 340387 and Dana Automotive Systems Group, LLC P/N ER1416. Deliveries are required within 97 days after the order, with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination. Packaging must adhere to MIL-STD-2073-1E and RP001, with items sealed in waterproof, greaseproof, opaque bags per MIL-DTL-117. Marking must comply with MIL-STD-129. The contract requires the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must comply with the Buy American Act, the Berry Amendment, and CMMC Level 2 self-assessment requirements. All quotes must be submitted electronically via the DIBBS portal by the deadline of October 2, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

Supply of Critical Application Gaskets (NSN 5330001467067)This subcontract, issued by the Department of Defense Strategic Acquisition Program Directorate, involves the supply of specialized gaskets meeting NSN 5330001467067 specifications for prime contractors supporting DLA Land and Maritime. The contractor is responsible for manufacturing or sourcing approved part numbers, specifically Rubbercraft 40356, Parker-Hannifin A-7200, or Lockheed Martin C4365-1, while ensuring strict adherence to Critical Application Item standards for high-grade elastomers or composites. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 339999. The contract requires the delivery of physical gaskets to the designated DLA facility, with a response deadline of October 2, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of Machine Gun Mounts (NSN 1005-01-533-9739)This subcontract involves the manufacture or sourcing of specialized machine gun mounts identified by NSN 1005-01-533-9739 for prime contractors supporting DLA Land and Maritime supply contracts. The provider must ensure all hardware meets specific technical specifications and is delivered on an as-needed basis. Managed by the Strategic Acq Program Directorate within the Department of Defense under NAICS code 332994, the contract requires a valid CAGE code and strict compliance with DFARS and DLA Master Solicitation Technical and Special Requirements. The response deadline for this opportunity is October 2, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Solicitation # SPE7LX-26-U-9909

Solicitation SPE7LX-26-U-9909 is an indefinite delivery contract issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of loop clamps. The requirement specifies 20 units of NSN 5340-01-481-8178, corresponding to Daimler Truck North America LLC part number 23-12231-004. This procurement is a total small business set-aside with a contract maximum value of 350,000 dollars. Delivery is required within 116 days, with the schedule specifying FOB Origin, while inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Hazardous materials must be identified per FED-STD-313 and packaged according to TQ requirement IP025. Invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system. Award evaluation is based on price quotes submitted via the DIBBS portal, and the contract incorporates various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and small business representations.

Hardware Manufacturing

POSTED

DEADLINE

Solicitation # SPE7LX-26-U-004V

Solicitation SPE7LX-26-U-004V is a request for quotations issued by the DLA Land and Maritime Strategic ACO Program Directorate for the procurement of gaskets, identified as NSN 5330001467067. This is a unilateral simplified indefinite-delivery contract set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) with a maximum contract value of 350,000 dollars. The government seeks an estimated quantity of 870 units, which are designated as critical application items. Approved sources include Rubbercraft Corporation of California (P/N 40356), Parker-Hannifin Corporation (P/N A-7200), and Lockheed Martin Corporation (P/N C4365-1). The contract requires delivery within 97 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Strict packaging and marking standards apply, including compliance with MIL-STD-129, MIL-STD-2073-1E, and RP001. Specifically, items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent deterioration from ultraviolet rays. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and the intentional addition of mercury. All payment requests and receiving reports must be processed through the Wide Area WorkFlow (WAWF) system. Quotations are due by October 2, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

MOUNT, MACHINE GUN

Solicitation # SPE7LX-26-U-004X

Solicitation SPE7LX-26-U-004X is a request for quotations issued by the DLA Land and Maritime Strategic ACO Program Directorate for the procurement of machine gun mounts, identified by NSN 1005-01-533-9739. This is a unilateral Indefinite Delivery Contract with a maximum value of 350,000 dollars and an estimated annual quantity of 16 units, though a guaranteed minimum of 2 units applies. The contract period is one year, and quotations are due by October 2, 2026. Award evaluation is based on the price quoted for the estimated annual demand, with a price evaluation preference available for certified HUBZone Small Business Concerns. The contract includes stringent technical and quality requirements, including CMMC Level 2 certification and compliance with SAE AS9003 or ISO 9001 standards. Inspection and acceptance will occur at the origin, conducted by a Quality Assurance Representative at the manufacturer's facility. Due to the nature of the equipment, the contract is subject to ITAR and EAR export controls, and requires adherence to demilitarization standards for small arms weapons and accessories. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, and all invoicing must be processed through the Wide Area Workflow system. Additionally, the procurement is subject to the Buy American Act and the Berry Amendment.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

UNIVERSAL JOINT, VEHICU

Solicitation # SPE7LX-26-U-9910

Solicitation SPE7LX-26-U-9910 is a total small business set-aside for the procurement of vehicular universal joints, specifically Daimler Truck North America LLC part number SP 5 103X (NSN 2520015765756). The requirement is for an estimated quantity of 64 units, though this is an estimate and may not be fully purchased. The procurement may result in an indefinite delivery contract for a one-year period with a maximum contract value of 350,000.00 dollars. Delivery is required within 81 days after the order, with terms set as FOB Origin and coverage designated as DLA Direct, CONUS. Both inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging requirements, including RP001 for palletization and MIL-STD-129 for marking and labeling. Non-hazardous materials must follow ASTM D3951, while hazardous materials must comply with TQ requirement IP025 and the Hazard Communication Standard. Technical specifications are governed by TDP Rev A Gen 1 and the DLA Master List of Technical and Quality Requirements. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including NIST SP 800-171 for cybersecurity and the Buy American and Balance of Payments Program.

Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS