Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Pneumatic Vehicle Tires

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the procurement and delivery of twenty pneumatic vehicle tires to a U.S. military depot located in Riyadh, Saudi Arabia, under a subcontract awarded by the Defense Logistics Agency within the Department of Defense. All tires must comply with stringent military packaging and labeling standards to ensure operational readiness and logistical compatibility within the U.S. military supply chain. The NAICS code 336360 confirms the contract falls under the category of tire manufacturing for motor vehicles, indicating the supplier is expected to provide products that meet defined military specifications. The delivery location is fixed at the designated military depot, and the submission follows required federal procurement protocols despite the absence of a solicitation number. The contract was posted on July 20, 2026, and is linked to the DIBBS procurement system under the award identifier SPE7LX26F73L3, signaling its formal integration into the Department of Defense’s logistics network.

General Info

Twenty military-spec tires delivered to Riyadh depot under DOD contract SPE7LX26F73L3.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

336360 - Motor Vehicle Seating and Interior Trim ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of 20 pneumatic vehicle tires to a U.S. military depot in Riyadh, Saudi Arabia, with compliance to military packaging and labeling standards.

Similar Contracts

Same NAICS industry code

Manufacture of Vehicle Seat Frames (NSN 2540014792018)The contract pertains to the manufacture and delivery of vehicular seat frames designated by NSN 2540014792018, adhering strictly to military specifications regarding design, performance, and quality. The supplier is required to ensure full compliance with all applicable military standards for packaging, labeling, and documentation to support logistical handling, storage, and field deployment. This subcontract falls under NAICS code 336360, indicating involvement in the manufacturing of motor vehicle parts and accessories, and is managed by the Defense Logistics Agency under the Department of Defense. The work is intended for military use and must meet rigorous durability and safety benchmarks appropriate for defense applications, with delivery and compliance obligations tied to the award details referenced by contract numbers SPE7L426D63AP and SPE7L126F060Z. The posting date indicates the solicitation was made in July 2026, and the performance location and point of contact remain unspecified in the available data.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Pneumatic Tire Supply for Military Delivery OrderThe contract requires the supply of four pneumatic tires meeting the National Stock Number 2610015060388 specification, ensuring alignment with military-grade performance and durability standards. Packaging must adhere to ASTM D3951 guidelines, while pallet-level labeling follows MIL-STD-129 requirements to ensure proper identification and handling throughout the defense logistics chain. Delivery is structured under FOB destination terms, meaning the supplier assumes all risks and responsibilities until the tires are received at the designated military location. The order carries a DPAS rating, indicating it is prioritized under the Defense Priority and Allocation System, which mandates timely fulfillment and places it above most civilian or non-priority commercial obligations. The contract is classified as a subcontract under NAICS code 336360, relating to motor vehicle parts manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense for military operational use.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Pneumatic Vehicular Tire SupplyThe contract entails the supply of five pneumatic vehicular tires designated by NSN 2610015382632, manufactured to meet rigorous military specifications and packaging standards to ensure readiness and compatibility across defense operations. These tires are intended for use in military vehicles and must adhere to strict quality and performance benchmarks established by the Department of Defense. The procurement is structured as a subcontract under the NAICS code 336360, which corresponds to vehicle tire manufacturing, and is managed by the Defense Logistics Agency as part of its broader supply chain responsibilities. The contract was posted on July 20, 2026, and is linked to the award reference SPE7LX26F73T8 under the master contract SPE7LX19D0029, indicating its place within a larger logistical framework. While details such as the specific delivery location and point of contact are not provided, performance is expected to align with DLA’s operational requirements for military-grade equipment. The absence of a set-aside designation suggests this is an open competition eligible to qualified contractors meeting the technical and compliance criteria. The contract underscores the ongoing need for reliable, standardized tire procurement to support the mobility and readiness of defense vehicle fleets.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Pneumatic Vehicular Tire SupplyThe contract involves the procurement, packaging, labeling, and delivery of two pneumatic vehicular tires to the Naval Air Warfare Center in Patuxent River, Maryland, with strict adherence to military specifications for packaging and labeling standards. The tires must meet all applicable defense requirements to ensure compatibility, safety, and reliability in operational environments. The work is being executed under a subcontract classified under NAICS code 336360, which pertains to automotive tire manufacturing, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The contract was posted on July 20, 2026, and is linked to the award number SPE7LX26F73Q9 under the parent contract SPE7LX19D0029. While specific delivery timelines or performance metrics are not outlined, compliance with military packaging and labeling protocols is mandatory, indicating that the tires will likely support military vehicles or equipment requiring standardized logistics handling. The place of performance is firmly designated to Patuxent River, MD, ensuring the delivery aligns with the operational needs of the Naval Air Warfare Center.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Vehicular Pneumatic Tire SupplyThe contract pertains to the supply of four new pneumatic vehicular tires with National Stock Number 2610015638328, manufactured to meet both military and commercial quality and performance standards. These tires are intended for delivery under a subcontract arranged through the Defense Logistics Agency, a component of the Department of Defense, and are governed by the NAICS code 336360 which designates the tire manufacturing industry. The contract was posted on July 20, 2026, and is tied to the specific procurement reference SPE7LX26F73S7 associated with the parent contract SPE7LX19D0029. Performance obligations are linked to DLA operations, though no specific delivery location or point of contact is provided. The procurement is part of routine logistics support for military vehicle maintenance and operational readiness, ensuring compliance with standardized specifications required for federal defense use.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Supply of Fitted Vehicle Covers (Transhield P/N 4572 or 4572XTG)The contract enables the recurring supply of commercial off-the-shelf fitted vehicle covers manufactured by Transhield, Inc., specifically part numbers 4572 and 4572XTG, under an indefinite-quantity arrangement. Delivery orders will be issued as needed to meet operational requirements, providing flexibility in volume and timing without fixed commitments. The covers are intended for use by the Defense Logistics Agency under the Department of Defense, with the North American Industry Classification System code 336360 indicating their classification within motor vehicle electrical and electronic equipment manufacturing. The contract is structured as a subcontract and was posted on July 20, 2026, with performance and fulfillment managed through the DLA’s contracting system. All deliveries are expected to adhere to established quality and specification standards for military-grade vehicle protection.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Pneumatic Vehicular Tire SupplyThe contract entails the procurement and delivery of three pneumatic vehicular tires to Fort Leonard Wood, Missouri, with strict adherence to military packaging, labeling, and shipping regulations. The tires must meet all applicable Department of Defense standards to ensure compatibility with military vehicle systems and logistical requirements. The work falls under NAICS code 336360, indicating classification within the tire manufacturing sector, and is structured as a subcontract under the Defense Logistics Agency, a branch of the Department of Defense. Although specific details such as delivery timelines, technical specifications, or payment terms are not provided, compliance with federal procurement protocols and military-grade durability and performance benchmarks is implied. The contract was posted on July 20, 2026, and the place of performance is fixed at Fort Leonard Wood, where the tires are destined for operational use.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Pneumatic Tire Supply for Vehicular UseThe contract involves the supply of two pneumatic vehicular tires identified by NSN 2610015382583 for use by a U.S. government agency under a subcontract arrangement. Delivery is scheduled on a FOB destination basis, meaning the seller assumes responsibility for transportation costs and risks until the tires arrive at the designated government location. All items must comply with strict military packaging and labeling standards to ensure handling, storage, and deployment readiness in defense operations. The procurement is managed by the Defense Logistics Agency within the Department of Defense under the NAICS code 336360, which pertains to tire manufacturing for motor vehicles. The contract was posted on July 20, 2026, and is linked to the specific award record through the DIBBS portal.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Pneumatic Tire Supply for Military VehiclesThe contract entails the supply of three military-specification pneumatic tires designated by NSN 2610001425160, intended for use in military vehicles. These tires must comply with ASTM D3951 standards for packaging and MIL-STD-129 requirements for pallet-level labeling to ensure uniformity, traceability, and readiness for military logistics systems. Delivery is arranged under FOB destination terms to Moody Air Force Base in Georgia, meaning the supplier bears all costs and risks until the goods are officially received at the designated location. The contract is classified as a subcontract under NAICS code 336360, indicating its alignment with tire manufacturing for motor vehicles, and is administered by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 20, 2026, and is accessible via the DIBBS portal, though no specific solicitation number is provided.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

VISOR, SUN, VEHICLEThe contract solicitation SPE7L4-26-T-5716 seeks the delivery of two sun visors for vehicles, identified by NSN 2540016525840, with a required delivery date of July 17, 2026, and a five-day delivery window after award. All items must be packaged and labeled in strict compliance with the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Non-hazardous items must be commercially packaged per ASTM D3951, while hazardous materials must adhere to TQ requirement IP025 as defined in FED-STD-313. All packaging and palletization must conform to RP001 standards and be marked according to MIL-STD-129, including barcoding and hazard labels as required by 29 CFR 1910.1200. The inspection and acceptance points are both at the destination, with delivery FOB origin to the DLA Distribution Management Office in Yermo, CA. The unit of issue is each, with no variance allowed in quantity. Hazardous materials, including items with radioactive content above specified thresholds, must be identified and labeled accordingly, and the use of hexavalent chromium is explicitly prohibited. Compliance with safety and environmental regulations, including the submission of Safety Data Sheets and adherence to DFARS clauses on whistleblower rights, cyber incident reporting, and trafficking in persons, is mandatory, with all representations verified through SAM. Proposals must be submitted electronically via DIBBS by the close of business on July 31, 2026, under a likely Low Price Technically Acceptable evaluation method, and all award documentation will be processed through WAWF. The delivery is single, non-recurring, and no option quantities or extended performance periods are included.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

LATCH, DOOR, VEHICULAThe contract pertains to the procurement of one unit of a vehicle door latch, identified by NSN 2540-01-662-1865 and part number P2000-18-L-KIT-SUPER, issued under solicitation SPE7L4-26-T-5713 by the Department of Defense through the Defense Logistics Agency. Delivery is required within five days of award, with shipment designated FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, wrapping, and cushioning materials, and must be marked per MIL-STD-129 with no special marking required. Palletization must adhere to DLA packaging requirements, and parcel post is explicitly prohibited; shipment must be sent via the fastest traceable means to the designated military logistics facility in Barstow, California, with freight delivered to DLA’s retail warehouse in Yermo, California. The contract enforces zero tolerance for quantity variance and incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The required delivery date is July 17, 2026, and the solicitation response deadline is July 31, 2026, with point of contact provided for inquiries.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

INSULATION, VEHICULAThis contract pertains to the procurement of vehicular insulation, specifically item NSN 2510-01-643-0806, with a quantity of three units, to be delivered FOB origin within 178 days from the contract award, with a required ship date of December 25, 2026. The product is identified as a critical application item manufactured by Robertson Manufacturing Inc with part number P/N 12580193, and must comply strictly with DLA’s Master List of Technical and Quality Requirements, which override any conflicting specifications. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any substitute materials must be pre-approved unless otherwise authorized by the specification. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization governed by DLA’s RP001 packaging requirements, and all units must be shipped in accordance with the specified unit of issue and quantity per unit pack. Delivery is to be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. Solicitation SPE7L3-26-T-077B was issued under DLA’s procurement authority, with Matthew Curry as the primary point of contact, and is classified under NAICS code 336360 for vehicle parts and accessories manufacturing.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

about 18 hours ago

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Environmental Consulting Services

POSTED

about 18 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

about 18 hours ago

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

about 18 hours ago

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 18 hours ago

DEADLINE

Cybersecurity Compliance (CMMC Level 2)The contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect covered defense information, ensuring alignment with the Defense Federal Acquisition Regulation Supplement (DFARS) 252.204-7012. This includes establishing robust cyber incident reporting procedures to meet federal requirements for timely disclosure of security breaches involving sensitive defense data. The work must support compliance at the Cybersecurity Maturity Model Certification Level 2 standard, which demands a structured approach to cybersecurity readiness, documentation, and continuous monitoring across the organization’s information systems. The effort is classified as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code for computer systems design and related services. Performance is expected to be carried out in support of federal defense operations, with no geographic restrictions specified.

Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE