Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Protective Cap-Plugs (Dust and Moisture Seals)

Open

Federal

Response Deadline11/16/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture or procurement of 12,612 protective cap-plugs, specifically NSN 5340002863506, designed to seal components against dust and moisture. These supplies are intended for prime contractors supporting the Department of Defense under the DLA Weapons Support Land Supply Chain. The contractor is required to provide Safety Data Sheets in compliance with 29 CFR 1910.1200(g) and Federal Standard No. 313, with delivery coordinated via First Destination Transportation. The project falls under NAICS code 332510 and specifies the place of performance in Tracy, California. Interested parties must adhere to the timeline established by the posting date of November 6, 2026, with a response deadline set for November 16, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

332510 - Hardware Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-27-T-4289.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CAP-PLUG, PROTECTIVE, DU

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 09:00:00 AM PSTin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies protective cap-plugs for prime contractors delivering DLA Weapons Support, Land Supply Chain contracts. Manufactures or sources NSN 5340002863506 to seal components against dust and moisture. Provides Safety Data Sheets per 29 CFR 1910.1200(g) and Federal Standard No. 313. Coordinates delivery via First Destination Transportation. Delivers 12,612 units of protective cap-plugs.

Similar Contracts

Same NAICS industry code

Surface Plate Casting and ProductionThis subcontract for the Defense Logistics Agency involves the manufacture of a single finished surface plate for prime contractors. The scope of work includes metal casting and the development of specific tooling required to produce the component. All items must be packaged according to ASTM D3951 and the DLA Master List of Technical and Quality Requirements. The project is categorized under NAICS code 332510 and will be performed in Johnston, Iowa. To be eligible, the contractor must maintain NIST SP 800-171 compliance and complete a CMMC Level 2 Self-Assessment. Responses to the solicitation are due by November 16, 2026.

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

Supply of Wire Strand Band (P/N 79/15VZ)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Access Door Hinge Supply

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

Optical Instrument Lens SupplierThis subcontract involves the supply of six specialized optical instrument lenses for prime contractors supporting DLA Weapons Support projects. The lenses must be produced or sourced to meet NSN 6650014726734 specifications, utilizing precision optical grinding and polishing equipment to ensure technical compliance. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland. All deliverables must strictly adhere to RP001 packaging requirements and MIL-STD-129 marking standards, specifically utilizing Special Marking Code 05 for delicate instruments. The response deadline for this opportunity is November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

Manufacture and Supply of Retaining StrapsThis subcontract involves the manufacture and supply of eight retaining straps for prime contractors supporting DLA supply contracts. The straps must be fabricated according to NSN 5340-01-479-4227 and Cadillac Gage Textron Inc. P/N 129284 specifications. All deliverables must adhere to strict military standards, including MIL-STD-130N for marking and MIL-STD-129 and MIL-STD-2073-1E for packaging. The contract is issued by the DLA Weapons Support Land Supply Chain under the Department of Defense. A critical requirement for the provider is maintaining NIST SP 800-171 cybersecurity compliance. Once completed and packaged, the items are to be delivered to DLA Distribution DDSP New Cumberland.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Supply of Expansion Plugs (NSN 5340-01-469-2648)This subcontract involves the supply of 118 expansion plugs to support DLA Weapons Support Land Supply Chain contracts. The contractor is responsible for manufacturing or sourcing General Motors LLC 7X677 P/N 10183926, ensuring all units meet NSN 5340-01-469-2648 specifications. All deliverables must be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict compliance standards, including the Buy American Act and the DLA Master List of Technical and Quality Requirements. Specific logistical mandates require packaging and marking in accordance with MIL-STD-129 and palletization following RP001 guidelines. The opportunity is categorized under NAICS code 332510.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Screw Thread Insert SupplierThis subcontract involves the supply of 62 screw thread inserts, part number 7018863215, to prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing the units and ensuring strict adherence to military standards, specifically MIL-STD-130N for identification marking, MIL-STD-129 for package marking, and MIL-STD-2073-1E and RP001 for packaging requirements. The contract is categorized under NAICS code 332510 and specifies that delivery will be handled as FOB Origin. Performance of the contract is centered in New Cumberland, Pennsylvania. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Hexagon Head Cap Screw SupplyThis subcontract involves the supply of 5,900 hexagon head cap screws, divided into 118 units of issue, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The required components must match part number DIN933-M6X30-10.9-B3B and adhere to 10.9 grade strength specifications, as they are designated as Critical Application Items. The contractor is responsible for ensuring all items are packaged according to ASTM D3951, palletized per RP001, and labeled in compliance with MIL-STD-129. Performance for this Department of Defense requirement will take place in New Cumberland, Pennsylvania, under NAICS code 332510.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310012948593)This subcontract involves the manufacture and sourcing of 4,411 flat washers conforming to NSN 5310012948593 for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires strict adherence to MIL-STD-2073-1E packaging standards and full compliance with the Buy American Act. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332510. To ensure the security of technical data, the contractor must undergo a NIST SP 800-171 cybersecurity assessment and may be required to obtain certification through the US/Canada Joint Certification Program. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Hose Clamp SupplyThis subcontract involves the manufacture and supply of 63 specialized hose clamps for the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The components must strictly adhere to NSN 4730-01-688-2648 and the DLA Master List of Technical and Quality Requirements, with all shipments packaged and marked according to MIL-STD-129 standards. Eligible providers must maintain an active SAM representation and a valid CAGE code to fulfill the delivery to the designated DLA location in New Cumberland. The opportunity is categorized under NAICS code 332510, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Specialized Hardware Component SupplyThis subcontract involves the supply of individual fasteners and hardware components for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The provider is responsible for manufacturing or distributing parts that strictly adhere to L3Harris P/N 748669-K02 TDP Rev A Gen 1 specifications. All delivered hardware must be certified, and the provider must ensure that no mercury has been intentionally added to the materials, in compliance with NAVSEA 5100-003D standards. The project falls under NAICS code 332510 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, for this specialized hardware procurement.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

Mechanic Equipment Hardware Kit AssemblyThis subcontract involves the kitting and packaging of mechanic equipment hardware for the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for sourcing components according to L3Harris P/N 748669-K02 TDP Rev A Gen 1 and delivering five completed, marked hardware kits. All work must be performed in New Cumberland, Pennsylvania, under NAICS code 332510. Strict adherence to military and safety standards is required, specifically packaging per MIL-STD-2073-1E and marking per MIL-STD-129. Additionally, the contractor must ensure full compliance with NAVSEA 5100-003D mercury restrictions. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

Grommet Assembly Fabrication and Supply

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

Manufacture and Supply of Access Covers (NSN 5340014090972)This subcontract involves the manufacture and supply of 377 specialized access covers for prime contractors working on Department of Defense projects under the DLA Weapons Support Land Supply Chain. The fabrication must strictly adhere to Drawing NR 19207 12273848 and 19207 12273849, Revision D, utilizing precision metal fabrication equipment. Performance will take place in New Cumberland, Pennsylvania. The contractor is required to maintain strict regulatory compliance, including MIL-STD-129 for marking and DFARS 252.223-7008 regarding the use of hexavalent chromium. Additionally, the provider must meet DFARS 252.204-7012 cybersecurity standards to ensure the protection of sensitive information. The project falls under NAICS code 332710.

POSTED

about 3 hours ago

DEADLINE

Fabrication and Supply of Valve Actuator GuardsThis subcontract involves the fabrication and supply of 1,282 Valve Actuator Guards for the DLA Weapons Support Land Supply Chain. The manufacturer is responsible for producing the units according to Army and DCSC Drawing 16236 CS-2300-0001 specifications, applying Chemical Agent Resistant Coatings, and adhering to MIL-STD-1916 zero-based sampling standards. Finished, coated, and packaged guards must be delivered to DLA Distribution Barstow. To be eligible for this project, the contractor must maintain CMMC Level 2 and ITAR compliance. The work falls under NAICS code 332311 and is managed under the Department of Defense. Interested parties must respond by November 16, 2026.

Prefabricated Metal Building and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Bail HandlesThis subcontract involves the manufacture or procurement of 357 bail handles for prime contractors supporting Defense Logistics Agency projects under the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all units meet specific part requirements and are delivered FOB Origin to Tracy, California. Strict adherence to military standards is required, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Additionally, the provider must comply with IP025 and DFARS 252.223-7001 regarding the handling of hazardous materials and must maintain CMMC Level 2 certification.

Wood Container and Pallet Manufacturing

POSTED

about 3 hours ago

DEADLINE

Raw Material Supply for NSN 5355-01-191-0559This subcontract involves the supply of raw material stock to prime contractors for the manufacture of Knob NSN 5355-01-191-0559, supporting the DLA Weapons Support Land Supply Chain under the Department of Defense. The selected provider is responsible for sourcing materials that strictly adhere to the chemical and physical properties defined in the part standard and delivering the stock directly to the manufacturer. To ensure quality and regulatory adherence, the provider must furnish Material Certifications and Mill Test Reports, which are essential for maintaining traceability and confirming compliance with the Buy American Act. The performance of this contract is centered at Tinker AFB, with a response deadline set for November 16, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 3 hours ago

DEADLINE

Precision Machined Knob FabricationThis subcontract involves the precision fabrication of 107 units of Knob NSN 5355-01-191-0559 for the DLA Weapons Support Land Supply Chain. The project requires the use of precision machining equipment to ensure all components meet military specifications as outlined in the DLA Master List of Technical and Quality Requirements RA001. Performance will take place at Tinker AFB. The contractor is responsible for the full production cycle, including manufacturing, quality control sampling per MIL-STD-1916 or ASQ H1331, and final packaging and labeling in compliance with MIL-STD-129 and ASTM D3951. The final deliverable consists of 107 finished knobs meeting all specified technical and quality standards.

POSTED

about 3 hours ago

DEADLINE

MIL-SPEC Packaging and Delivery Services

Motor Vehicle Towing

POSTED

about 3 hours ago

DEADLINE

Manufacture and Supply of Helical Torsion Springs (NSN 5360-01-195-8874)

Spring Manufacturing

POSTED

about 3 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for the DLA Weapons Support Land Supply Chain involves providing specialized preservation, packaging, and marking services for two mounting plates. The contractor is responsible for executing all work in strict accordance with MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and Preservation Method 10. A critical safety requirement is the total prohibition of mercury or mercury compounds during the process, and the service provider must hold formal certification in MIL-STD packaging standards. The project is managed under NAICS code 488190 and will be performed in Tracy, California. Interested parties must respond by November 16, 2026, to support prime contractors in meeting Department of Defense specifications for the delivery of these components.

Other Support Activities for Air Transportation

POSTED

about 3 hours ago

DEADLINE

Precision Fabrication of Mounting Plates (NSN 5340-01-671-7109)This subcontract involves the precision fabrication of two mounting plates for the DLA Weapons Support Land Supply Chain, specifically adhering to NSN 5340-01-671-7109 standards. The scope of work requires precision machining and forming, with a strict prohibition on the use of additive manufacturing. Performance will take place in Tracy, California, under NAICS code 332710. To qualify and execute the contract, the provider must hold JCP certification for technical data access and maintain strict compliance with ITAR, EAR, and NIST SP 800-171 regulations. Interested parties must respond by November 16, 2026, to ensure all finished plates meet the required technical specifications for the prime contractors.

POSTED

about 3 hours ago

DEADLINE

Spring Wire Material Supply

Spring Manufacturing

POSTED

about 3 hours ago

DEADLINE

Helical Compression Spring Fabrication

Spring Manufacturing

POSTED

about 3 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of Sediment Strainers (NSN 4730-01-652-5899)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Fabrication and Supply of Deck Railing Stanchions

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Supply of Blind Rivets (NSN 5320-01-282-9894)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Supply of Solid Rivets (NSN 5320-01-353-9570)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Manufacturing of Helical Compression Spring Seats

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Precision Shim (NSN 5365-01-521-7826) Supplier

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

Supply of Self-Locking Plate Nuts (NSN 5310-01-445-6092)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Precision Ball Bearing Manufacturer/Supplier

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Manufacturing of Helical Compression Seat Springs (NSN 5340-01-220-4198)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Supply of Bushing, Sleeve

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Specialized Ball Bearing Supplier

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-9488

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS