This Government Contract opportunity from North Carolina was posted on June 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Pumps and Mechanical Equipment

Closed

State & Local

Submission Closed07/29/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333911

New

DIBBS

Valve Supply (NSN 2915-01-182-9935)This subcontract involves the manufacture or procurement of five units of a specific valve, identified by NSN 2915-01-182-9935, to support prime contractors delivering on DLA supply contracts. The work is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Tinker AFB. The contractor must ensure full traceability to approved sources and conduct quality inspections in accordance with MIL-STD-1916 or ASQ H1331. Mandatory qualifications include SAE AS9003 or ISO 9001 certification and a completed CMMC Level 2 self-assessment. The response deadline for this requirement is November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Globe Valve Supply (NSN 4820014473220)This subcontract involves the manufacture and supply of Globe Valves matching NSN 4820014473220 for prime contractors under Department of Defense DLA supply contracts. The technical specifications require the use of NEOFLON M400H material as a substitute for KEL-F and the application of KRYTOX 240AC for lubrication. It is explicitly stated that these components must not be designed for use with steam, hydraulic fluid, or seawater. The project is managed through the DDSP New Cumberland Facility and requires strict adherence to MIL-STD-2073-1E, MIL-STD-129, and RP001 packaging standards. All valves must be delivered completed, marked, and packaged on an FOB Origin basis. The response deadline for this opportunity is November 5, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Fluid Pressure Regulating Valve (NSN 4820016993722)This subcontract involves the procurement of one Fluid Pressure Regulating Valve meeting the exact specifications of NSN 4820016993722 for prime contractors on DLA/Navy projects. The Department of Defense, specifically DLA DIST SAN JOAQUIN, requires the part to be delivered to Tracy, California, by March 20, 2027. A critical restriction of this contract is that the valve must not be produced using additive manufacturing processes. Eligible providers must maintain an active CAGE code and registration in SAM.gov. The opportunity falls under NAICS code 333911, with a response deadline set for November 5, 2026.

POSTED

DEADLINE

Fuel Metering and Distributing Pump SupplyThis subcontract involves the supply of 14 fuel metering and distributing pumps, identified by NSN 015537551, to support prime contractors delivering on DLA supply contracts. The scope of work requires the manufacturer or source to ensure all units comply with MIL-STD-129 marking standards and are palletized according to RP001 DLA Packaging Requirements. Additionally, the provider must supply Material Safety Data Sheets and hazard warning labels in accordance with 29 CFR 1910.1200. The contract is issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, with performance taking place in New Cumberland, Pennsylvania. Operating under NAICS code 333911, the agreement focuses on the delivery of 14 fully palletized pumps. The solicitation was posted on October 25, 2026, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

3000GPM Diesel Fire Pump and Controller SupplierThis subcontract agreement involves the supply and delivery of a 3000GPM diesel fire pump and a matching controller for prime contractors working on City of Chattanooga facility projects. To ensure full system compatibility, the supplier must provide a replacement unit that matches the manufacturer and size of the existing equipment. The contract is managed by the City of Chattanooga Business Unit in Tennessee under NAICS code 333911. Interested parties must submit their responses by the deadline of November 12, 2026, for this procurement which was posted on October 25, 2026.

City of Chattanooga Business Unit

POSTED

DEADLINE

Well Pump Installation ContractorThis subcontract opportunity is for a Well Pump Installation Contractor to support prime contractors on an Ontario Clean Water Agency project located at Mississippi Mills Well 7. The selected contractor will be responsible for the physical removal of existing pump assemblies and piping, conducting inspections of the well casing, and the subsequent installation and connection of new pump assemblies and discharge piping to ensure a fully operational system. The scope of work requires the use of specialized well-pulling equipment, including cranes and pump hoisting rigs. To qualify, contractors must hold a licensed well contractor designation and possess valid confined space certifications. Interested parties must submit their responses by November 9, 2026.

Ontario Clean Water Agency

POSTED

DEADLINE

Well Pump and Motor Equipment SupplierThis subcontract agreement involves the supply of heavy-duty submersible pump and motor assemblies for the Mississippi Mills Well 7 replacement project under the Ontario Clean Water Agency. The selected supplier is responsible for the manufacture and delivery of the equipment directly to the project site in Canada, ensuring all components meet CSA or equivalent electrical safety standards. As part of the deliverables, the supplier must provide comprehensive technical documentation, including manufacturer certifications, performance curves, and warranty information. Interested parties must submit their responses by November 9, 2026, to support the prime contractors overseeing this Government of Ontario infrastructure initiative.

Ontario Clean Water Agency

POSTED

DEADLINE

Pump & Equipment SupplyThis subcontract for Pump and Equipment Supply involves the procurement and delivery of three new industrial-grade sanitary sewer pumps and associated mechanical hardware for lift station projects at the University of California, Merced. The selected provider is responsible for ensuring all equipment meets specific University material standards and specifications, and must provide all necessary manufacturer certifications upon delivery to the project site in Merced, California. The opportunity was posted on October 23, 2026, with a response deadline of November 17, 2026. Falling under NAICS code 333911, this contract focuses on the supply of critical infrastructure components to support prime contractors working on the university's utility systems.

University of California, Merced

POSTED

DEADLINE

Pumps & Valve EquipmentThis subcontract for the Antelope Valley - East Kern Water Agency involves the supply and installation of high-capacity pumps and valves for prime contractors working on Project No: HDWB 26-02. The scope of work includes the installation of submersible deep well turbine pumps, line shaft pumps, and horizontal frame-mounted pumps, as well as butterfly, check, ball, and plug valves. The selected provider is responsible for delivering fully installed and tested pumping systems. The project is located in Palmdale, California, and falls under NAICS code 333911. Interested parties must submit their responses by the deadline of December 9, 2026.

Antelope Valley - East Kern Water Agency

POSTED

DEADLINE

Iceberg Desalination Buoy SupplyThis subcontract involves the supply and delivery of the Iceberg desalination buoy system for prime contractors working on pilot projects for the City of Fort Bragg in California. The scope of work includes provisioning the Iceberg technology unit and integrating the necessary systems for water production and delivery, specifically ensuring the system can operate without the need for shore-based electricity for its pumps. The contractor is responsible for delivering a fully operational desalination buoy directly to the project site in Fort Bragg. Classified under NAICS code 333911, this agreement focuses on the deployment of specialized water desalination technology to support municipal pilot initiatives.

POSTED

DEADLINE

Challenge Titan 265TC Guillotine Paper Cutter Supply and InstallationThis subcontract involves the procurement, delivery, and installation of one Challenge Titan model 265TC guillotine paper cutter for the Pennsylvania Department of Labor and Industry mailroom. The selected vendor is responsible for the complete physical setup to ensure the unit is fully operational upon delivery. To qualify, the provider must be an original equipment manufacturer or an authorized dealer and must ensure all equipment complies with ANSI labeling standards. The agreement includes a one-year warranty covering both parts and on-site repairs. Interested parties must submit their responses by November 6, 2026, in accordance with the solicitation posted on October 23, 2026. This project falls under NAICS code 333911 and is intended for prime contractors managing the Commonwealth of Pennsylvania DLI mailroom projects.

Department of Labor and Industry

POSTED

DEADLINE

Brine System Plumbing and Pump IntegrationThe Brine System Plumbing and Pump Integration subcontract involves the supply and installation of fluid transport systems for prime contractors working on California Department of Transportation Division of Equipment projects. The scope of work requires the installation of brine-resistant pumps, manifolds, nozzle assemblies, and the routing of hoses and fittings in strict accordance with Caltrans Specification 80210-445-261. To ensure durability and performance, the contractor must utilize high-pressure hoses and corrosion-resistant valves to deliver a fully functional fluid delivery system integrated into the tanker body. This opportunity is categorized under NAICS code 333911 and was posted on October 22, 2026. Interested parties must submit their responses by the deadline of November 17, 2026. The project is managed through the California Department of Transportation and focuses on specialized plumbing and pump integration for heavy-duty transport equipment.

California Department of Transportation

POSTED

4 days ago

DEADLINE

in 22 days

AI Contract Overview

The contract involves the supply of submersible pumps, check valves, gate valves, and related mechanical components, aimed at supporting the Town of Apex in North Carolina. It is structured as a subcontract under the NAICS code 333911, which covers industrial machinery manufacturing. The solicitation was posted on June 12, 2026, with a deadline for responses set for July 29, 2026, indicating a window for potential suppliers to submit their proposals. Although specific location details for the place of performance and point of contact are not provided, the contract is managed by the Town of Apex. The procurement focuses on obtaining vital mechanical equipment necessary for infrastructure or water management systems. Interested parties can access further information and submit proposals via the provided online platform. This contract underscores the municipality’s efforts in maintaining or upgrading mechanical systems through specialized equipment acquisition.

General Info

Supply of submersible pumps and valves for Town of Apex infrastructure, bids due July 29, 2026.

Agency

North Carolina → Town of Apex

NAICS

333911 - Pump and Pumping Equipment Manufacturing

Place of Performance

NC, USA

Set-Aside

NONE

Documents

This scope was carved out of 1015BB2PS.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Town of Apex Big Branch 2 Pump Station

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJun 12

subcontract

Response DeadlineJul 29

Deadline has passed

Submission Closed

07/29/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNorth Carolina → Town of Apex

ContactsNo contacts available

OfficeN/A

Organization / Agency

North Carolina → Town of Apex

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of submersible pumps, check valves, gate valves, and associated mechanical components.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS