Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Purifier Cartridge (NSN 4310014607980)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the procurement and delivery of one purifier cartridge, identified by NSN 4310014607980 and Part Number 058821, manufactured to meet all Defense Logistics Agency specifications and packaging standards. The item is classified under NAICS code 339999 and is being procured as a subcontract under the Department of Defense. Delivery must be made FOB Destination to Naval Station Rota in Spain and to FPO AE addresses, ensuring compliance with military logistics requirements. The contract was posted on August 7, 2026, and is administered through the Defense Logistics Agency with the award reference SPE7MX26F9655. The supplier is responsible for full adherence to regulatory and technical criteria without deviation.

General Info

One purifier cartridge procured for DLA, FOB Destination to Spain and FPO AE, NSN 4310014607980.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

339999 - All Other Miscellaneous ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of one CARTRIDGE, PURIFIER (NSN 4310014607980, Part No. 058821) compliant with DLA specifications and packaging requirements. Delivery is FOB Destination to Naval Station Rota, Spain and FPO AE.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7L1-26-T-943E

The contract pertains to a non-NSN item with part number 5GQU3FMRB1003N1820A3E10B3SSP1P8 sourced from COTTERMAN CO USA located in Croswell, Michigan, with a total quantity of two units to be delivered in 20 days. Delivery is FOB destination with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling, with palletization adhering to DLA’s RP001 packaging requirements, and packaging unit quantity specified as one per unit pack. The destination for delivery and marking is Camp Carroll, Waegwan, Korea, under the W50YED code, with transportation governed by DLAD Proc Notes C19 and C20. The contract reference is SPE7L1-26-T-943E, with an original required delivery date of August 7, 2026, and a purchase request number of 7017798068. The unit price is not provided but the total cost is implied as two units at the listed price line, with government use indicators and procurement details including the DLA point of contact and contract type classified as a solicitation.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-943C

LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-944X

LAND SUPPLY CHAIN

POSTED

DEADLINE

BLOOD RECIPIENT SET, IN

Solicitation # SPE2DS-26-T-322M

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-943D

LAND SUPPLY CHAIN

POSTED

DEADLINE

FMS Case: ZB-B-WDR_KENYA

Solicitation # ZB-B-WDR_26_KENYA

This Foreign Military Sales (FMS) procurement for Kenya, identified as solicitation ZB-B-WDR_26_KENYA, is a Small Business Set-Aside under NAICS code 339999, requiring vendors to submit technical and pricing proposals exclusively through the Unison Marketplace portal. Vendors must complete all designated green cells in RFQ Attachments 1 and 2, providing precise unit prices and quoting the exact color or pattern specified in Column D, while also submitting detailed technical documentation that clearly demonstrates compliance with each part number’s specifications. Any proposed alternative materials require a side-by-side comparison against the referenced part numbers, with clear identification of compliance points through highlighting, circling, or similar means. Proposals must be single, final submissions with no multiple options, as the Government will evaluate initial submissions without requesting revisions, although it retains the right to seek clarification during evaluation. Technical acceptability is a pass/fail criterion, and award will be made on a Lowest Price Technically Acceptable (LPTA) basis, with the Government reserving the right to make multiple awards to different vendors if no single offeror fulfills all requirements or offers fair and reasonable pricing for all items. All items must be available for pick-up within the continental United States, with a single U.S.-based shipping address required for all deliveries; drop shipments are prohibited, though partial shipments are acceptable. Pricing will be assessed for fairness and reasonableness under FAR 15.404-1, and insufficient data may trigger requests for additional non-certified information. Compliance with the Berry Amendment is mandatory, requiring vendors to affirm that products are manufactured in the United States using domestic materials, and an explicit certification must be provided that no IFF (Identification Friend or Foe) technology is included. Payment and shipping instructions will be issued via Wide Area Workflow (WAWF) at the time of award, and the Government retains full discretion to cancel the solicitation at any time due to lack of funds, with no liability for proposal costs. The submission deadline is 1:00 PM EST on 20 August 2026, with all questions due by 12 August 2026, and only proposals submitted through the Unison Marketplace portal will be considered. Offerors must be registered small businesses under SBA guidelines, and while specific packaging, marking, or preservation standards are not detailed, compliance with the RFQ’s technical and logistical instructions will form the core of acceptability.

Xr W4QS US Army Contracting Agy

POSTED

DEADLINE

FMS Case:ZB-B-VTD_TAIWAN

Solicitation # ZB-B-VTD_26_TAIWAN

This solicitation is a Foreign Military Sales (FMS) case for TAIWAN, issued under the solicitation number ZB-B-VTD_26_TAIWAN by the U.S. Army Contracting Agency, with the Department of Defense as the overseeing agency. It is a Small Business Set-Aside under NAICS code 339999 and requires vendors to submit technical and pricing proposals exclusively through the Unison Marketplace by 1:00 PM EST on 20 August 2026. All proposals must include fully completed green cells in RFQ Attachments 1 and 2, with precise adherence to the color and pattern specified in Column D, and must provide detailed, side-by-side technical comparisons demonstrating how the proposed items meet each specified part number requirement—highlighted or circled for clarity. NSNs are for reference only; compliance is based solely on the part number and color criteria defined in the attachments. The evaluation is conducted under a Lowest Price Technically Acceptable (LPTA) methodology, meaning technical acceptability is assessed first on a pass/fail basis, with award going to the lowest-priced qualified offer. Multiple awards may be made if no single vendor fulfills all requirements, with each award limited to the line items for which a vendor submitted a technically acceptable and lowest-priced proposal. Vendors must submit only one quote per item—with no alternatives or options permitted—and must certify compliance with the Berry Amendment and confirm the absence of IFF technology. All items must be made available for pickup within the continental United States at one designated shipping address, with drop shipments strictly prohibited. The Government may request additional price analysis data under FAR 15.404-1 if deemed necessary but will not request revisions after submission and may ask questions solely to clarify proposals. Award is contingent upon the availability of funds, and the government reserves the right to cancel without penalty. Wide Area Workflow (WAWF) and shipping details will be provided at award time.

Xr W4QS US Army Contracting Agy

POSTED

DEADLINE

FMS Case: TU-B-UDO_TUNISIA

Solicitation # FMS_TU-B-UDO_RFQ

This procurement is a Foreign Military Sales (FMS) case for the Republic of Tunisia, soliciting equipment through a Small Business Set Aside under NAICS code 339999, with awards limited to small businesses only. Vendors must submit a single, unambiguous proposal through the Unison Marketplace portal by 1:00 PM EST on 20 August 2026, fulfilling all instructions in RFQ Attachment 1, including completion of designated green cells and accurate reporting of color and pattern as specified. Technical compliance is mandatory, requiring vendors to provide clear, side-by-side comparisons demonstrating how their proposed products meet each part number specification listed in Column B, with exact matches highlighted or circled. Alternative materials are permitted only if accompanied by a detailed justification that directly aligns with the required specifications. The award will follow the Lowest Price Technically Acceptable (LPTA) method, where technical acceptability is a pass/fail criterion and price reasonableness is determined solely through analysis under FAR 15.404-1; no trade-offs between cost and technical merit are allowed. No revisions or multiple options will be accepted, and the Government retains the right to request clarification but will not allow proposal amendments post-submission. All items must be available for pickup within the continental United States, with one designated shipping address per vendor and drop shipments strictly prohibited. Partial shipments are acceptable, and final shipping and invoicing instructions will be provided via Wide Area Workflow (WAWF) at the time of award. The Government may make multiple awards if no single vendor meets all line items, selecting the lowest technically acceptable offeror for each eligible item. Proposal compliance includes mandatory certifications for Berry Amendment adherence and explicit declaration that the items do not include IFF technology. The contract is contingent on available funding, and the government may cancel without liability. All information submitted in the RFQ spreadsheet becomes part of the final award, and submissions received outside the Unison Marketplace will be rejected.

Xr W4QS US Army Contracting Agy

POSTED

DEADLINE

Animal Microchip Supply and DeliveryBroward County is seeking a subcontractor to supply and deliver ISO-compliant animal microchips for use in its animal care operations, with full responsibility for packaging, labeling, and logistics to ensure timely delivery to county facilities. The microchips must meet international standards for animal identification and be delivered in accordance with specifications that guarantee compatibility with existing scanning systems used by county animal services. All materials must be properly labeled and packaged to prevent damage or contamination during transit, and the vendor must coordinate logistics to meet the county’s operational schedule. The opportunity was posted on August 7, 2026, with responses due by August 12, 2026, and is classified under NAICS code 339999 for other miscellaneous manufacturing. The contract is open to qualified subcontractors who can demonstrate compliance with ISO requirements and reliable delivery capabilities to Broward County facilities in Florida.

POSTED

DEADLINE

MIL-STD-130 Item Marking & Data Matrix Encoding

Defense Logistics Agency

POSTED

DEADLINE

Commercial Manufacturing of Air-Filtering RespiratorsThe contract involves the full-scale commercial manufacturing of air-filtering respirators classified as commercial off-the-shelf items to fulfill the Defense Logistics Agency’s surge and sustainment needs. This includes end-to-end production, rigorous quality assurance protocols, proper packaging in compliance with military standards, and timely delivery to designated locations. The work is executed under a subcontract pursuant to a broader Defense Department procurement effort, with the North American Industry Classification System code 339999 indicating it falls under other miscellaneous manufacturing. The production must meet the stringent performance, durability, and safety benchmarks required for federal emergency and operational use, ensuring readiness across all branches of the military. Execution will occur under the oversight of the DLA, with performance locations determined by operational logistics requirements, and delivery schedules aligned with projected demand cycles.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Filler, Dent, Metal S (NSN 8030009262133)The contract entails the procurement and delivery of 35 units of military-spec Filler, Dent, Metal S, identified by NSN 8030009262133, to the designated delivery point in Tobyhanna, Pennsylvania. The terms are FOB Destination, meaning the supplier assumes all responsibilities and costs until the goods arrive at the specified location, at which point ownership and risk transfer to the recipient. Inspection of the delivered items will occur upon arrival to ensure compliance with military specifications and contractual requirements. The contract is classified as a subcontract under the NAICS code 339999, indicating it falls under other manufacturing industries, and is administered by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on August 7, 2026, and the award is linked to a specific contract identification number, though no solicitation number is provided. The office address and place of performance details remain unspecified in the data, but delivery is firmly targeted to Tobyhanna, PA.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

DECK BOX OPERATOR, V

Solicitation # SPE7MC-26-T-186P

The contract is for the procurement of one unit of Deck Box Operator, V, identified by NSN 4820-01-521-1101, under solicitation SPE7MC-26-T-186P, issued by the Defense Logistics Agency. Delivery is required within 20 days to FPO AP 96632 aboard the USS THEODORE ROOSEVELT CVN 71, with terms FOB destination and zero variance allowed in quantity. The item must be packaged in strict accordance with MIL-STD-2073-1E and MIL-STD-129, using DLA-approved packaging procedures and codes, including unit container D3 and pack code U. The shipment must avoid parcel post and instead be dispatched by the fastest traceable means with DLA Vendor Shipment Method (VSM) and RDD 777 designation. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as specialized instruments or sensors as defined by NAVSEA, and any exempted fluorescent lamps or instruments must include a secondary containment and be shock-proof per NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendments. The item shall be inspected and accepted at the delivery point, and special marking is not required. The contract is classified under NAICS 332911 and was posted on August 9, 2026, with responses due by August 20, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

AIR CONDITIONER

Solicitation # SPE8E8-26-T-5113

The contract pertains to the procurement of six air conditioners, identified by NSN 4120016491002 and part number 38203-0666 from AIRXCEL, INC., under solicitation SPE8E8-26-T-5113. Delivery is required within 20 days of contract award, with shipment FOB destination, and inspection and acceptance occur at the delivery point. No variance in quantity is permitted, with zero percent plus or minus tolerance. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including mandatory labeling per MIL-STD-129 and palletization as specified in RP001. The unit of issue is each, with a total price of $6.00 per unit, totaling $36.00 for the order. The destination for delivery is Fleet Activities Sasebo, PSC 476 Box 1, FPO AP 96322-0001, United States, with an alternate freight shipping address in Sasebo, Japan. Transportation instructions are governed by DLAD Proc Note C19 and C20. The original required delivery date is August 5, 2026, and the contract is administered by the Defense Logistics Agency under the NAICS code 333415, with primary point of contact Alexis Selby. All supplies are subject to the rules regarding covered defense information and the removal of government identification from non-accepted items.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-187Y

A single check valve with a steel body and stainless steel trim is required, designed for a maximum operating pressure of 150 psi and a maximum temperature of 180 degrees Fahrenheit, with flange-type end connections and an end-to-end length of 4.12 inches nominal. The valve body may be manufactured from bar stock ASTM A36 alloy AISI 1018 as an acceptable alternative to the original cast material. The contract specifies strict compliance with DLA packaging requirements and incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The use of Class I ozone depleting chemicals is prohibited, and mercury or mercury-containing compounds may not be intentionally added or come into direct contact with the hardware, except for specific functional uses such as in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; in those cases, portable devices must be shockproof and include a secondary containment boundary. This is classified as a critical application item with authorized part numbers from Admiral Valve LLC. Only one unit is required, to be delivered within 20 days FOB origin with zero variance in quantity, inspected and accepted at destination under MIL-STD-2073-1E packaging guidelines and MIL-STD-129 marking requirements. Palletization must align with DLA standards, and shipment must be sent by the fastest traceable means—parcel post is expressly prohibited. The delivery address is the Nuclear Power Training Unit in Goose Creek, South Carolina, and the contract was issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-187Y with a required delivery date of August 3, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-186G

The contract specifies the procurement of a single valve body with NSN 4820-01-337-4114 and part number 6839586 for Allison Transmission Inc or 2AX532 for Oshkosh Defense LLC under solicitation SPE7MC-26-T-186G. The item must be delivered in one unit within ten days of award, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination location, Fort Bliss, Texas, where the shipment must be sent via the Redball Express system using the fastest traceable means, explicitly excluding parcel post. Packaging must comply with ASTM D3951 and MIL-STD-129, following DLA Packaging Requirements for Procurement, with unit packaging and palletization strictly adhering to specified standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards. The contract includes detailed shipping and marking instructions, including the military freight address, project code, and government-only identifiers, and the required delivery date is August 5, 2026. The official point of contact is Paula McClary, reachable via email and phone, with additional compliance and ordering details accessible through the DLA eProcurement portal.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-186N

The contract specifies the procurement of a single globe valve made of 316 stainless steel with a 1/4 inch female NPT connection, designated by NSN 4820-01-042-2921 and part numbers 3008143-1 and 4251F4Y, for use in high-pressure, high-temperature environments up to 2000 PSI and 600 degrees Fahrenheit, primarily for end item storage and recharging applications. It is classified as a critical application item with strict compliance requirements, including zero tolerance for intentional mercury or mercury-containing compounds in direct contact with the hardware, except for specific exceptions like batteries, fluorescent lamps, sensors, and weapon systems, which must meet additional containment standards per NAVSEA 5100-003D. The valve must adhere to all technical and quality requirements referenced from the DLA Master List, and packaging must conform to MIL-STD-2073-1E and MIL-V-3, with Level A preservation when ZZ is used as the preservation method. Marking and labeling must follow MIL-STD-129 without special codes, and palletization must meet DLA packaging guidelines. Delivery is required within 20 days FOB destination to the USS THEODORE ROOSEVELT CVN 71, FPO AP 96632, via the fastest traceable means—not parcel post—with a required delivery date of August 10, 2026, and shipment must be coordinated using RDD 777 and the DLA Vendor Shipment Module. The contract is issued under solicitation SPE7MC-26-T-186N with a fixed quantity of one unit, no allowable variance, and inspection and acceptance occurring at destination.

Industrial Valve Manufacturing

POSTED

DEADLINE

VALVE, FLOW CONTROL

Solicitation # SPE7MC-26-T-187T

The contract is for the procurement of four flow control valves, identified by NSN 4820011979566 and part number 025-11046, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. Delivery is required within five days of contract award, with shipment originating from the supplier and delivered FOB origin to the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The unit price is $4.00 per valve, totaling $16.00 for the full order, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-V-3, including preservation methods specified as Level A when ZZ is used, and marking must adhere to MIL-STD-129. Palletization and packaging requirements follow DLA’s RP001 standards, with no special marking codes applied. Inspection and acceptance occur at origin, and the item is classified as a critical application component. The contract is issued under solicitation SPE7MC-26-T-187T, with a response deadline of August 20, 2026, and is managed by the Defense Logistics Agency under NAICS code 332911. Technical and quality requirements are incorporated by reference from the DLA Master List, and the latest revisions in effect on the solicitation issue date govern compliance. The point of contact for inquiries is Chad Zernis, with the delivery scheduled for January 14, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

PLATE, INSTRUCTION

Solicitation # SPE8E6-26-T-4163

This contract pertains to the procurement of a single unit of Plate, Instruction, identified by NSN 9905-01-090-7680 and part number 3561030, under solicitation SPE8E6-26-T-4163. The item is subject to specific DLA packaging requirements as outlined in the DLA Master List of Technical and Quality Requirements, with applicable technical standards referenced by R and I numbers. It is classified as a Type I (Code M) item with a non-extendable 24-month shelf life, requiring special marking code 32 to indicate this requirement. Packaging must comply with MIL-STD-2073-1E, including preservative methods, wrap materials, and unit container specifications, while marking must adhere to MIL-STD-129. The shipment must be transported via traceable means, excluding parcel post, to the designated delivery point at Rapid City, SD, with delivery due within 10 days of contract award and no tolerance for quantity variance. The contract specifies FOB origin delivery, with inspection and acceptance occurring at the destination. The Government retains control over the item’s handling and disposition, with specific instructions for removal of government identification from non-accepted supplies. The supply chain data includes the supplier address, shipment details through W8WP SD ARNG CSMS 2, and mandatory reporting identifiers such as RDD E, project TP 2, and supplier code W81LBJ. The contract is governed by DoD unit-of-issue standards, and Covered Defense Information provisions apply. The contract is issued by the Defense Logistics Agency under NAICS code 339950, with Brett Scull designated as the primary point of contact. The solicitation closed on August 20, 2026, with an original required delivery date of August 5, 2026, and all contractual obligations must be fulfilled within the prescribed parameters.

Sign Manufacturing

POSTED

DEADLINE

COATING KIT, RAIN ER

Solicitation # SPE8ES-26-T-2548

The contract pertains to the procurement of a Coating Kit, Rain ER, identified by NSN 8010-01-580-5987 and part number FP-100CM, with a quantity of four kits, each unit of issue being a KT. Delivery is required within 20 days to Edwards Air Force Base, California, FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. The item is classified as a TYPE 2, CODE 4 shelf-life item with a 12-month extendable shelf life, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards. Packaging and shipping must adhere to DLA packaging requirements, including specific hazardous materials handling protocols under IP025, and traceable freight methods only are permitted—parcel post is prohibited. The supplier, CAAP CO., INC., must submit Safety Data Sheets and compliant Hazardous Communication Standard labels in accordance with 29 C.F.R. 1910.1200, effective June 1, 2015, and ensure employee training on these new requirements. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the acquisition type and solicitation timeline. The procurement is under solicitation SPE8ES-26-T-2548, with a response deadline of August 17, 2026, and the original required delivery date set for August 6, 2026.

Paint and Coating Manufacturing

POSTED

DEADLINE

HARNESS ASSEMBLY, MASK,

Solicitation # SPE8E6-26-T-4162

The contract pertains to the procurement of a harness assembly for an oxygen mask, identified by part number 460-190-457 and NSN 4240-01-392-6079, with a quantity of ten units to be delivered FOB origin within twenty days. The supplier, Interspiro Inc., is required to comply with all technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and governed by the revision in effect at the time of solicitation or award. Packaging must adhere to MIL-STD-2073-1E, with specific methods including preservation, labeling, and containment standards, and must follow MIL-STD-129 for marking, strictly prohibiting the use of plastics for wrapping or cushioning where feasible. Delivery is to be made to the Southwest Regional Maintenance Center in San Diego, with hazardous material shipping instructions directing delivery to Building 3322T, and parcel post is explicitly prohibited; shipping must occur via the fastest traceable method. Inspection and acceptance occur at the destination with no variance allowed in quantity. The contract, issued under solicitation SPE8E6-26-T-4162, carries a unit price of $10.00 for a total value of $100.00 and includes restrictions on the handling of covered defense information. The required delivery date is August 10, 2026, and the contract includes specific government use codes for tracking and logistics.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-186H

A safety relief valve with NSN 4820-01-588-7177 and part number 517.00005.3 is being procured by the Defense Logistics Agency under contract SPE7MC-26-T-186H, with a single unit requirement to be delivered within ten days of contract award. Delivery is FOB origin and must comply with stringent packaging standards per ASTM D3951 and MIL-STD-129, while adhering to DLA’s Master List of Technical and Quality Requirements, which override any conflicting specifications. The item must be packaged and palletized according to RP001 DLA Packaging Requirements, with no quantity variance permitted. The destination for delivery is Fort Riley, Kansas, with shipment required via the fastest traceable means, excluding parcel post, and marked with the official military shipping identifier W55XGJ and RDD 555. The contract specifies that all labeling and documentation must reflect government standards, and the item must be inspected and accepted at the destination. The solicitation was issued on August 9, 2026, with responses due by August 20, 2026, and the original required delivery date is August 5, 2026. The point of contact for inquiries is Paula Mcclary, reachable via email and phone provided in the contract documentation.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-186E

The contract pertains to the procurement of a single DISK, VALVE with NSN 4820012210266, supplied by HUNT VALVE COMPANY, INC. under solicitation SPE7MC-26-T-186E. The item is required in a quantity of one unit with a delivery deadline of 20 days from the award, delivered FOB destination, and subject to zero variance in quantity. Inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, and all markings must adhere to MIL-STD-129 without special codes. Palletization follows DLA packaging requirements, and the shipment is addressed to USS BOXER LHD 4 at FPO AP 96661. The item is to be shipped via vessel under DLAD PROC NOTE C19 and C20, with a required delivery date of August 5, 2026. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, particularly excluding intentional use of mercury or mercury-containing compounds in or on the hardware, with limited exceptions for approved functional applications like certain batteries or instruments, which must include secondary containment as per NAVSEA 5100-003D. All supplies must be free of government identification if non-accepted, and the unit of issue is the individual piece (EA). The Defense Logistics Agency issues this solicitation under NAICS code 332911, with Paula Mcclary listed as the primary point of contact. The delivery is part of a larger logistical effort identified under project 9AL TP 2 and requires use of the VSM system for vendor shipment coordination.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2546

This contract pertains to the procurement of 100 ounces of adhesive with NSN 8040-01-420-0999 under solicitation SPE8ES-26-T-2546, issued by the Defense Logistics Agency. The adhesive must comply with multiple technical and quality standards including SAE AMS-S-8802F, MIL-STD-129R, MIL-STD-147F, and Federal Standard 313F, and is classified as a Type I (Code G) item with a non-extendable shelf life of nine months. All hazardous materials must be accompanied by Safety Data Sheets (SDS) formatted to 29 C.F.R. 1910.1200 standards and labeled in accordance with the Globally Harmonized System, with supplier training on these requirements mandatory prior to award. Packaging must follow MIL-STD-2073-1E and DLA packaging requirements, including specific marking per MIL-STD-129 and the special code 32 indicating Type I shelf life. Palletization and shipping must adhere to RP001 and IP025 for hazardous materials, with freight shipped via traceable means only and no parcel post permitted. Delivery is FOB destination within 20 days of award to Fort Benning, Georgia, with zero variance allowed in quantity and inspection and acceptance occurring at the delivery point. The contract calls for full compliance with DLA’s Master List of Technical and Quality Requirements, and the unit of issue is the ounce as defined by DoD standards.

Adhesive Manufacturing

POSTED

DEADLINE