Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Radioactive Materials-Compliant Pump Control Units

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Defense Logistics Agency under the Department of Defense, involves the procurement and delivery of two pump control units identified by NSN 4320011909398. The units must be fully compliant with all applicable regulations for radioactive materials, which includes the provision of comprehensive regulatory documentation and appropriate labeling. The contract falls under NAICS code 333914 and was posted on June 9, 2026. It ensures that the specialized equipment meets strict safety and legal standards for the handling and transport of radioactive components.

General Info

DLA subcontract for two radioactive pump control units meeting all regulatory safety standards.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7M1-26-T-9794.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONTROL UNIT, PUMP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 9

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of 2 units of pump control units (NSN: 4320011909398) compliant with regulations for radioactive materials, including full regulatory documentation and labeling.

Similar Contracts

Same NAICS industry code

Supply of Fuel and Oil Servicing Nozzles

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7M1-27-T-0931

Solicitation SPE7M1-27-T-0931, issued by the DLA Weapons Support Maritime Supply Chain, is a request for quotations for two rotary pumps under NSN 4320014337891. The requirement specifies compatible part numbers from Hyster-Yale Group, Inc. (P/N 4249723) and Concentric Rockford Inc (P/N 1800116). The items are to be delivered FOB Destination to the USNS Cesar Chavez T-AKE 14, located at FPO AP 96662, with an original required delivery date of July 24, 2026, and a delivery lead time of 20 days. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contractor must adhere to strict packaging and marking standards, utilizing ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Palletization must follow RP001 guidelines. Special material restrictions prohibit the intentional addition of mercury or mercury-containing compounds, and hazardous materials must be labeled according to the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and NIST SP 800-171 cybersecurity assessment requirements. Quotes must be submitted via the DIBBS portal.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE4A5-27-T-2005

Solicitation SPE4A5-27-T-2005 is for the procurement of 20 spring loaded shaft seal assemblies, identified by NSN 4320-01-304-8042 and Honeywell International part number 1599711-1. The contract is issued by the DLA Weapons Support ASC Supplier OEM Division with a required delivery date of November 19, 2027, and a delivery lead time of 379 days. Delivery is FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot at Hill AFB, Utah. The contractor must adhere to strict quality and technical standards, including the DLA Master List of Technical and Quality Requirements, CMMC Level 2 Self-Assessment, and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951 and RP001 for palletization. Quality assurance will be managed via sampling methods such as MIL-STD-1916 or MIL-STD-105/ASQ Z1.4, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic preferences, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

SLEEVE, SHAFT, PUMP

Solicitation # SPE7M1-27-T-1663

Solicitation SPE7M1-27-T-1663, issued by the DLA Weapons Support Maritime Supply Chain, is a request for quotations for five pump shaft sleeves, specifically part number 5108C from Sims Pump Valve Co, Inc, under NSN 4320015905965. The required delivery date is February 7, 2027, with a delivery timeline of 89 days after order. Shipping is designated as FOB Origin, and the items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with the Buy American and Balance of Payments Program under DFARS 252.225-7001. Additionally, the contractor must comply with cybersecurity reporting via DFARS 252.204-7012 and various hazardous material labeling standards. All quotations must be submitted through the DLA Internet Bid Board System by November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

NOZZLE, FUEL AND OIL SE

Solicitation # SPE8E9-27-T-0277

Solicitation SPE8E9-27-T-0277 is a request for quotations issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment MRO SVC I, for the procurement of nine fuel and oil servicing nozzles (NSN 4930-01-458-5914). The requirement is designated as a total small business set-aside under NAICS code 333914, with a delivery lead time of 125 days and a required delivery date of January 24, 2027. Performance is set for New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-129 for marking. Technical and quality standards are governed by the DLA Master List, and the items are identified as Commercial Off The Shelf (COTS) requiring a CMMC Level 2 self-assessment. Environmental and safety restrictions are significant, including a prohibition on the intentional addition of mercury and compliance with the Hazard Communication Standard for any hazardous materials. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. Award evaluation may include a HUBZone price preference, and offerors must comply with the Buy American Act and Berry Amendment regarding domestic material sourcing.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

PUMP, CENTRIFUGAL

Solicitation # SPE7M1-27-T-1691

Solicitation SPE7M1-27-T-1691 is a request for quotations for the procurement of eight centrifugal pumps, identified by NSN 4320123255215. Issued by the DLA Weapons Support Maritime Supply Chain, this requirement is designated as a HUBZone set-aside and is being processed under the First Destination Transportation program with delivery terms set as FOB Origin. The required delivery date is January 4, 2028, with a need ship date of April 20, 2027, and a delivery lead time of 161 days after the order is placed. Inspection and acceptance will occur at the destination, specifically DLA Distribution San Diego. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-130 for Item Unique Identification. It prohibits the use of Class I ozone-depleting chemicals and requires compliance with the Buy American Act and the Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must submit their quotations via DIBBS by November 9, 2026, and must ensure all representations and certifications are updated in the System for Award Management.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

PUMP, CHEMICAL FEED

Solicitation # SPE7M1-27-T-1672

Solicitation SPE7M1-27-T-1672 is a small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of four chemical feed pumps. The required items are identified by NSN 4320011824014 and part number 1AA8978 from Drew Marine USA Inc. This is designated as a critical application item with a required delivery date of October 22, 2026, and a delivery window of 20 days after the order is placed. Delivery is FOB destination to the USNS Yukon T-AO 202 in FPO AP 96686. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and NAVSEA 5100-003D regarding the prohibition of mercury compounds. Compliance with the Buy American Act and various DFARS cybersecurity and telecommunications restrictions is required. Inspection and acceptance will occur at the destination. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Offerors are cautioned that items produced via additive manufacturing are ineligible for award unless specifically authorized.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7M1-27-T-1698

Solicitation SPE7M1-27-T-1698 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 10 wearing rings, identified by NSN 4320011903569, for use with Warren Pump Model 24MFP. The contract specifies a delivery window of 20 days after award, with an original required delivery date of October 14, 2026. Delivery is to be made to the W8SG MO ARNG FMS 4 facility in Poplar Bluff, Missouri, with inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List technical requirements take precedence. Palletization must comply with RP001, and the hardware must be free of intentionally added mercury or mercury-containing compounds. Key regulatory requirements include compliance with the Buy American and Balance of Payments Program, DFARS cybersecurity reporting standards, and the use of the Wide Area WorkFlow system for electronic invoicing. The acquisition falls under NAICS code 333914 and is managed by point of contact Michael Reese.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-27-T-1689

This solicitation, issued by the DLA Weapons Support Maritime Supply Chain, is for the procurement of three spring-loaded shaft seal assemblies, identified by NSN 4320016925912 and part number 231-31-1643 from Air & Liquid Systems Corporation. The requirement is designated as a small business set-aside under NAICS code 333914. Delivery is required within 244 days after order, with a need ship date of July 12, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, as well as packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Key regulatory compliance measures are integrated via FAR and DFARS clauses, covering the Buy American Act, cybersecurity reporting, and prohibitions on covered defense telecommunications equipment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

PARTS KIT, RECIPROCATIN

Solicitation # SPE7M1-27-T-1658

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

PUMP UNIT, ROTARY

Solicitation # SPE7M1-27-T-0749

Solicitation SPE7M1-27-T-0749, issued by the DLA Weapons Support Maritime Supply Chain, is a request for quotations for the procurement of six rotary pump units, NSN 4320015457027. This is designated as a restricted source item requiring engineering source approval from the Government design control activity. The procurement is categorized under NAICS code 333914, with a required delivery date of September 6, 2027, and a delivery window of 164 days after the order. Shipping is FOB Origin, with the final destination for inspection and acceptance being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except in specific authorized components. Contractors must utilize the Wide Area WorkFlow system for electronic invoicing and payment requests. Compliance with various FAR and DFARS clauses is required, specifically regarding cybersecurity safeguarding of covered defense information, combating trafficking in persons, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-27-U-0791

Solicitation SPE7M1-27-U-0791 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of spring loaded shaft seal assemblies, identified by NSN 4320123160326. This is a unilateral Indefinite Delivery Contract for a one year period with a maximum contract value of 350,000.00 dollars. The estimated annual quantity is 33 units, though this amount is an estimate and not a guaranteed purchase. Delivery is required within 49 days after receipt of order with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, with DLA Master List Technical and Quality Requirements taking precedence. Palletization must follow RP001 requirements. Offerors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and are prohibited from providing parts produced via additive manufacturing unless specifically authorized. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Award evaluation will be based on the price quoted for the estimated annual demand.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 20 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 20 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 20 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 20 hours ago

DEADLINE

HazMat Freight Forwarding and DeliveryThis subcontract for HazMat Freight Forwarding and Delivery involves the transportation of hazardous sealing compound kits for prime contractors supporting Defense Logistics Agency Troop Support supply contracts. The scope of work requires the delivery of 24 kits FOB Destination to Langley Air Force Base in Virginia and Joint Base Elmendorf-Richardson in Alaska. To ensure product integrity, all materials must be transported in refrigerated or climate-controlled vehicles that maintain temperatures below 80 degrees Fahrenheit. The selected provider must possess DOT Hazardous Materials certification and obtain the necessary base access clearances for the specified military installations. All deliveries must be completed within a strict five-day window. This opportunity falls under NAICS code 484220 and is managed through the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Pump Separator Manufacturing and Supply

Defense Logistics Agency

POSTED

DEADLINE

Fuel Metering Pump Supply and Delivery

Defense Logistics Agency

POSTED

DEADLINE

Hand Fuel Pump Supply

Defense Logistics Agency

POSTED

DEADLINE

DISPENSING PUMP, HAN

Solicitation # SPE8EE-26-T-1650

Defense Logistics Agency

POSTED

DEADLINE

SEPARATOR, PUMP

Solicitation # SPE7M1-25-Q-1570

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-175S

FLUID HANDLING DIVISION

POSTED

CLOSED

PUMP, BUCKET, LUBRICA

Solicitation # SPE8EE-26-T-1822

Defense Logistics Agency

POSTED

DEADLINE

PUMP, FUEL, METERING

Solicitation # SPE7L326F1484

Defense Logistics Agency

POSTED

DEADLINE

PUMP, COOLING SYSTEM

Solicitation # SPE7L126F9639

Defense Logistics Agency

POSTED

DEADLINE

CONTROL UNIT, PUMP

Solicitation # SPE7M1-26-T-9794

Defense Logistics Agency

POSTED

DEADLINE

IMPELLER, PUMP, CENTR

Solicitation # SPE7M1-26-T-079P

Defense Logistics Agency

POSTED

DEADLINE

PUMP, FUEL, ELECTRICA

Solicitation # SPE7L5-26-T-3628

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS