Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Raw Materials and Components for Pallet Fabrication

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply of military-grade aluminum alloys, composite panels, and fasteners specifically for the fabrication of aircraft pallets, with strict adherence to full traceability requirements and DFARS-compliant sourcing to ensure all materials originate from approved domestic or allied sources. All components must meet rigorous defense standards and be documented throughout the supply chain to guarantee integrity, quality, and compliance with federal regulations governing defense procurement. This is a small business set-aside subcontract under NAICS code 331529, with responses due by August 7, 2026, and performance based in Tracy, California, with a ZIP code of 95304-5000. The solicitation is issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, targeting qualified small businesses to fulfill the requirement. The materials procured will directly support critical military logistics infrastructure, requiring precise specifications, verified documentation, and timely delivery to meet operational readiness goals.

General Info

Supply of DFARS-compliant military-grade materials for aircraft pallets, small business set-aside, Tracy, CA, due August 7, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

331529 - Other Nonferrous Metal Foundries (except Die-Casting)View NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of military-grade aluminum alloys, composite panels, and fasteners for aircraft pallet fabrication, with full traceability and DFARS-compliant sourcing.

Similar Contracts

Same NAICS industry code

WASHER ASSORTMENT

Solicitation # SPE4A6-26-T-11UD

This contract specifies the procurement of a washer assortment under solicitation SPE4A6-26-T-11UD, with a total quantity of 749 units at a unit price of $749.00, resulting in a total contract value of $560,901. The item, identified by NSN 5310-01-097-9034 and part number ME00607300001, is classified as a commercial item and a critical application item requiring strict adherence to technical and quality standards defined in the DLA Master List of Technical and Quality Requirements. Packaging must comply with MIL-STD-129 and ASTM D3951, with palletization governed by DLA Packaging Requirements, and all containers labeled according to government specifications. The contract mandates zero non-conformances in sampling under MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned specific verification levels or AQLs. Inspection and acceptance occur at destination, with no variance allowed in quantity, and delivery is due within 171 days, with an original required delivery date of February 3, 2027, and a needed ship date of January 31, 2027. The item is to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation procedures governed by DLA procedural notes. This is a total small business set-aside under NAICS code 331529, and all contractor data, including certificates of conformance, must comply with FAR 52.246-15 unless overridden by a quality assurance letter. Proprietary data restrictions apply, and defense information handling protocols are in effect.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-11CZ

The contract specifies the procurement of flat washers identified by NSN 5310015135434 and part number NAS1149E0616P, meeting technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. The item is classified as a critical application component and must conform to NAS1149 Revision 8 dated 08/30/2024. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements RP001, with palletization and labeling strictly adhering to DLA directives. The unit of issue is each (EA), and quantities are fixed with no variance allowed. Two delivery clauses exist: 159 units to be delivered to Robins Air Force Base, Georgia, and 508 units to New Cumberland, Pennsylvania, both with a 71-day delivery window from the ship date, though the original required delivery date is February 8, 2027. Inspection and acceptance occur at the destination. The contract is issued under solicitation SPE4A6-26-T-11CZ with a response deadline of August 10, 2026, and is managed by the Department of Defense, ASC Commodities Division, with Briana McCarter as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Sub-tier Supplier for Raw and Processed Metal MaterialsThe contract is a subcontract awarded by the Defense Logistics Agency under the Department of Defense for the supply of domestically sourced raw and semi-finished metal materials, including steel and aluminum alloys, intended for fabrication and machining operations. The NAICS code 331529 indicates the focus on metal forging and stamping, underscoring the need for materials suitable for high-precision industrial manufacturing applications. The contract was posted on July 31, 2026, and requires all materials to be procured within the United States to ensure compliance with domestic sourcing mandates relevant to defense-grade production. Performance will occur across unspecified locations within the U.S., with no specific place of performance detailed in the provided data. The contract does not specify a solicitation number or set-aside designation, suggesting it may be issued under an existing master agreement or blanket purchase arrangement. The primary objective is to support defense-related manufacturing through a reliable and consistent supply chain of qualified materials, emphasizing quality, traceability, and on-time delivery. The subcontractor is expected to meet stringent material specifications and standards necessary for military and defense applications, though exact technical requirements are not outlined here. The link provided leads to the official DIBBS portal for award details, where further contractual obligations, delivery schedules, and compliance metrics would be accessible to authorized parties.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Raw Materials or Components for Guide AssemblyThe contract seeks a supplier to provide defense-grade raw materials, fasteners, or sub-components specifically for use in a guide assembly, all of which must meet stringent MIL-SPEC standards and include full traceability documentation to ensure compliance with military quality and security protocols. The materials required are critical to mission-critical defense systems, necessitating precise material composition, manufacturing controls, and documentation of origin and processing history through every stage of production and delivery. The scope is limited to subcontracted supply, with the end product destined for performance at the specified location in New Cumberland, Pennsylvania, under the oversight of the Department of Defense’s Land Supplier Operations Vehicle Support organization. The solicitation is open for responses until August 10, 2026, with the opportunity posted on July 30, 2026, and is classified under NAICS code 331529 for other fabricated metal product manufacturing. There is no set-aside designation, meaning all eligible suppliers may compete regardless of business size or ownership status. The contract does not include a designated point of contact, and interested parties must rely on the provided DIBBS link for full details, submissions, and updates. Participation requires strict adherence to defense contracting protocols, including the ability to validate compliance with military specifications and undergo potential audits or inspections related to material sourcing and production integrity.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-10KN

This contract specifies the procurement of 770 flat washers identified by NSN 5310-01-199-1354 and part number NAS1149D0563K, manufactured to meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The item is classified as a critical application component and must comply with NAS1149 Revision 8 and other referenced specifications including FF-W-92C and AN960 Rev 21. Zero tolerance for non-conformances applies during inspection unless otherwise stated, with sampling conducted per MIL-STD-1916 or equivalent zero-based plans; unspecified attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except for defined exceptions such as functional uses in batteries, instruments, or chemical reagents approved by NAVSEA, with mandatory secondary containment for portable devices. Packaging must adhere to MIL-STD-2073-1E with specific preservation methods and MIL-STD-129 marking, and palletization follows DLA packaging guidelines. The item is to be delivered FOB origin to Corpus Christi, Texas, within 171 days of the contract award, with no variance allowed in quantity. Inspection and acceptance occur at destination. The unit of issue is each, priced at $770 per unit for a total value of $592,900. Item Unique Identification is not required per customer request, and DLA procurement rules govern all aspects of fulfillment including transportation, marking, and shipping instructions. The solicitation was issued on July 30, 2026, with responses due by August 7, 2026, under the DoD’s Defense Logistics Agency.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-10VJ

The contract is for 358 flat washers with NSN 5310-01-417-3933, solicited under SPE4A6-26-T-10VJ by the Department of Defense’s ASC Commodities Division. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, and delivery must be completed within 200 days after delivery order issuance. The item falls under NAICS code 331529 and is subject to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Technical data associated with this item is controlled under ITAR or EAR, prohibiting export or disclosure to foreign nationals without prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 governs compliance. Access to this export-controlled data is restricted to DLA contractors certified under the US/Canada Joint Certification Program, who have completed required training and questionnaire and received DLA approval. Performance is to be delivered to Tracy, California, 95304-5000, with Lisa Harvie identified as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-10TE

The contract is for 119 flat washers with part number 52B6178-1 and NSN 5310-01-189-8470, issued under solicitation SPE4A6-26-T-10TE by the ASC Commodities Division of the Department of Defense. Delivery is required within 73 days of award, and the place of performance is New Cumberland, PA with a zip code of 17070-5002. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sampling unless otherwise stated. Item Unique Identification is not required per the customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Covered defense information may apply to this procurement. The item has no shelf life requirement. The supplier is Engineering Systems Co located in Aston, PA, and the primary point of contact is Michael Blain with email and phone provided. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-10WP

The contract requires the delivery of 5,745 flat washers (NSN 5310015135434, part number NAS1149E0616P) under solicitation SPE4A6-26-T-10WP, with delivery due 71 days after award, FOB origin, to the DLA New Cumberland Facility in Pennsylvania. The item is classified as a critical application and must meet stringent technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951 for packaging. Compliance with MIL-STD-129 is mandatory for all marking and labeling, and palletization must adhere to RP001 DLA Packaging Requirements. Sampling for inspection follows MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise specified, and critical, major, and minor attributes must be verified at AQL levels of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the destination, with the government retaining full authority over quality determination. All packaging and bare items must be physically marked in accordance with RQ017, and government identification must be removed from non-accepted supplies under RQ011. The contract mandates adherence to applicable safety standards, including hazard communication under 29 CFR 1910.1200, and requires submission of Safety Data Sheets for any hazardous materials prior to award. Contractors are prohibited from enforcing internal confidentiality agreements that restrict reporting of waste, fraud, or illegal activity. Invoicing must be submitted electronically via WAWF, and payment will be processed in accordance with streamlined acquisition procedures under FAR 52.213-4, though the exact contract type remains unspecified. The order is subject to zero quantity variance and must be shipped no later than July 14, 2026 to meet the original delivery deadline of October 30, 2026. Offerors must provide a valid UEI and CAGE code and represent their small business status if claiming socioeconomic advantages, with post-award re-representation required under clause 52.219-28. The contract includes clauses on employment eligibility verification, combating human trafficking, equal opportunity, sustainable products, and safeguarding contractor information systems, and incorporates NIST SP

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Specialized Raw Materials or ComponentsThe contract seeks the supply of military-grade metals, damping materials, or fasteners specifically designed for resilient weapon mount assemblies, requiring full traceability and strict compliance with shelf-life protocols. All materials must meet stringent defense standards, with certifications documenting origin, composition, and quality assurance throughout the supply chain. The materials are intended for use in critical defense systems where performance under extreme conditions is essential, and non-compliance with specifications could compromise operational readiness. The solicitation is issued as a subcontract under the NAICS code 331529, managed by the Department of Defense through its ASC SUPPLIER OPER AE AND AF DIV, with performance required at NEW CUMBERLAND, PA, 17070-5002. Responses are due by August 6, 2026, and interested parties must submit proposals through the official DIBBS portal before the deadline. The contract emphasizes accountability, material integrity, and adherence to defense logistics requirements, with no set-aside provisions designated for small or specialized businesses.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 15 hours

Solicitation # SPE4A6-26-T-10FB

The contract specifies the procurement of 435 flat washers with NSN 5310-00-013-9992 under solicitation SPE4A6-26-T-10FB, issued by the Department of Defense’s ASC Commodities Division. The item is classified as a critical application item and must comply with SAE AS9549 Revision D dated 11/01/1998, and is subject to all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined. Packaging must follow MIL-STD-2073-1E with specific procedural codes, and marking must conform to MIL-STD-129 without special marking. Palletization must meet DLA packaging requirements, and the delivery is FOB origin with a strict 0% quantity variance. The shipment is destined for the DLA Distribution facility in New Cumberland, PA, with a delivery window of 171 days from the contract award, originally required by September 6, 2027, and a need ship date of January 25, 2027. Inspection and acceptance occur at the destination, and transportation logistics follow DLA procedural notes C19 and C20.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Raw Material and Metal Stock SupplyThe contract entails the supply of aluminum, steel, or specialty alloy stock materials precisely cut to specified dimensions to meet MIL-SPEC standards for the fabrication of a cover assembly. These materials must adhere to strict military specifications to ensure compatibility, durability, and performance in defense-related applications. The materials are intended for use in manufacturing components that demand high precision and reliability under demanding operational conditions. This is a subcontract awarded under the Department of Defense through the Defense Logistics Agency, with the North American Industry Classification System code 331529 indicating nonferrous metal die casting and related manufacturing processes. The solicitation was posted on July 21, 2026, and performance is expected to align with the needs of federal defense contracts. The contract does not specify a set-aside designation, suggesting it is open to full and open competition, and all materials must be delivered to meet exacting technical requirements without deviation to support downstream assembly and integration processes.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Metal FabricationThe contract outlines the supply of defense-grade steel, aluminum, or specialty alloys specifically for use in manufacturing piston assemblies, with strict requirements for material traceability and quality assurance. All materials must be accompanied by certified mill test reports and fully compliant with established defense material standards to ensure performance, reliability, and interoperability in critical military applications. The subcontract is issued under the Department of Defense through the Defense Logistics Agency, targeting the NAICS code 331529 for other metal forgings and stampings, indicating the specialized nature of the fabricated components. Performance of this contract involves providing materials that meet exacting defense specifications, with emphasis on documented provenance from raw source to final delivery. While no specific location is designated for performance, the materials are intended for use in defense manufacturing systems where compliance and consistency are non-negotiable. The contract was posted on July 21, 2026, and is accessible via the DIBBS system, indicating formal procurement under U.S. military supply chain protocols. No set-aside provisions are applicable, and the contract is structured as a subcontract likely flowing from a prime contractor engaged in defense production.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Precision Machined Component Supply – Ball Screw Actuator Cap

Precision Turned Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Cybersecurity Compliance (CMMC Level 2 Support)

Computer Systems Design Services

POSTED

about 9 hours ago

DEADLINE

Packaging, Marking, and Shipment to DLA

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling

Other Scientific and Technical Consulting Services

POSTED

about 9 hours ago

DEADLINE

Item Unique Identification (IUID) Marking Services

Engineering Services

POSTED

about 9 hours ago

DEADLINE

Manufacture of Dual Breakaway, Auxiliary Component (P/N 21901-939)

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 9 hours ago

DEADLINE

Manufacturing of a Critical Application Spacer Plate (NSN 5365004030349)The contract requires the complete manufacturing, finishing, inspection, packaging, and delivery of 101 units of a critical application Spacer Plate identified by NSN 5365004030349, all to meet stringent military specifications. The work must adhere to exacting standards for material composition, surface plating, and quality control procedures to ensure the components are fit for high-stakes military use. All deliverables must be fully compliant with defense requirements, including rigorous documentation and traceability throughout the production lifecycle. The contract is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with performance required at Tinker AFB, Oklahoma, 73145-8000. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026. The North American Industry Classification System code is 332510, indicating the focus is on forging and stamping operations. The contract is not subject to a specific set-aside designation, and all work must be completed and delivered within the specified timeline to meet operational readiness demands.

Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

First Article Test (FAT) and Government Testing SupportThe contract requires comprehensive engineering and technical support for First Article Testing (FAT) to ensure compliance with government standards and procedures outlined under FAR 52.209-4. This includes developing detailed test plans, preparing and managing all associated documentation, and coordinating directly with government representatives to facilitate timely and accurate evaluation of first articles. The work demands a high level of technical expertise and attention to regulatory requirements, with the goal of validating conformance before full-scale production begins. This is a small business set-aside subcontract under NAICS code 541330, designated for total small business participation as defined by SBA regulations. Performance is required at Robins Air Force Base, Georgia, with a response deadline of August 13, 2026, and the solicitation was posted on August 5, 2026. The contracting entity operates under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, and the work will involve close collaboration with federal personnel to meet stringent quality and compliance objectives for defense-related systems.

Engineering Services

POSTED

about 9 hours ago

DEADLINE

Specialized Materials Supply for Aerospace PanelThe contract entails the supply of high-performance aerospace-grade raw materials, including aluminum alloys and advanced composites, strictly adhering to the technical specifications outlined in TDP Rev A Gen 1, with rigorous requirements for full material traceability and compliance with military packaging standards. These materials are critical for the fabrication of aerospace panels and must meet exacting quality and reliability benchmarks necessary for defense applications. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing support for small business participation in defense contracting. The North American Industry Classification System code 331314 designates this as a nonferrous metal rolling, drawing, and extruding operation. The solicitation was posted on August 5, 2026, with a deadline for responses set for August 13, 2026, and performance is to be carried out at Robins Air Force Base, Georgia, with a zip code of 31098-1887. While no specific point of contact or agency office address is provided beyond the overarching Department of Defense affiliation, the contracting activity falls under the ASC SUPPLIER OPER AE AND AF DIV. The contract’s operational context implies direct support to defense systems requiring certified materials with proven durability under extreme conditions, and all shipments must comply fully with military-grade packaging and documentation protocols to ensure integrity throughout the supply chain.

Secondary Smelting and Alloying of Aluminum

POSTED

about 9 hours ago

DEADLINE

Precision Fabrication of Structural Panel (AI)The contract calls for the manufacture of a precision structural panel in strict accordance with military drawings such as 4F75981-107A and the associated Technical Data Package Rev A Gen 1, encompassing all required machining, forming, and assembly processes to meet stringent aerospace specifications. The work must be executed to exacting standards ensuring dimensional accuracy, material integrity, and functional performance critical to defense aerospace applications. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 332321, reserved exclusively for small businesses as defined by federal regulations. The performance location is designated as Robins AFB, Georgia, with a response deadline of August 13, 2026, and the solicitation was posted on August 5, 2026. The contract is administered by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, and all work must be completed within the provided technical and regulatory framework to ensure compliance and delivery readiness.

Metal Window and Door Manufacturing

POSTED

about 9 hours ago

DEADLINE

Precision Machined Component Supply – End Plate (NSN 6605006334227)Five precision-engineered end plates, identified by NSN 6605006334227, are to be manufactured and delivered in strict accordance with the military technical data package TDP Rev A Gen 1, ensuring full compliance with MIL-STD-129 for labeling and MIL-STD-1916 for statistical process control. The components must be produced under the NAICS code 332721 and delivered to Tinker AFB, Oklahoma, with a final delivery deadline aligned with the contract’s response deadline of August 13, 2026. This subcontract opportunity, issued under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, requires adherence to all technical, quality, and documentation standards mandated by federal military specifications, with no set-aside designation applies. All submissions must be completed through the DIBBS portal by the stated deadline to be considered.

Precision Turned Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Unable to decompose sub-opportunities due to system unavailabilityThe solicitation titled "Unable to decompose sub-opportunities due to system unavailability" was posted on August 5, 2026, with a response deadline of August 15, 2026, and is classified as a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV. No solicitation number, NAICS code, type of set aside, or organizational details are available due to system limitations. The place of performance and point of contact information are unspecified, and no office address details are provided. Attempting to analyze subcontract or supplier opportunities has failed as the system is currently unavailable, preventing full decomposition of the contract structure. The official reference for this opportunity is accessible via the provided DIBBS link, but no further contract terms, requirements, or scope details can be retrieved.

POSTED

about 9 hours ago

DEADLINE