Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WASHER, FLAT

Active
SPE4A6-26-T-11CZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of flat washers identified by NSN 5310015135434 and part number NAS1149E0616P, meeting technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. The item is classified as a critical application component and must conform to NAS1149 Revision 8 dated 08/30/2024. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements RP001, with palletization and labeling strictly adhering to DLA directives. The unit of issue is each (EA), and quantities are fixed with no variance allowed. Two delivery clauses exist: 159 units to be delivered to Robins Air Force Base, Georgia, and 508 units to New Cumberland, Pennsylvania, both with a 71-day delivery window from the ship date, though the original required delivery date is February 8, 2027. Inspection and acceptance occur at the destination. The contract is issued under solicitation SPE4A6-26-T-11CZ with a response deadline of August 10, 2026, and is managed by the Department of Defense, ASC Commodities Division, with Briana McCarter as the primary point of contact.

General Info

Procure 667 NAS1149E0616P washers to DLA specs, zero defects, deliver to Robins AFB and New Cumberland by Feb 8, 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

331529 - Other Nonferrous Metal Foundries (except Die-Casting)View NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-11CZ Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
BRIANA MCCARTER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,FLAT
WASHER<(>,<)> FLAT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC NON GOVT STD NAS1149 REVISION NR 8 DTD 08/30/2024 PART PIECE NUMBER: NAS1149E0616P
SPE4A6-26-T-11CZ
SECTION B
PR: 7017703472 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017703472 0001 EA 159.000
NSN/MATERIAL:5310015135434
DELIVERY (IN DAYS):0071
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:07/31/2026 Original Required Delivery Date:02/08/2027
SPE4A6-26-T-11CZ
SECTION B
PR: 7017703472 PRLI: 0001 CONT’D

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017703472 0002 EA 508.000
NSN/MATERIAL:5310015135434
DELIVERY (IN DAYS):0071
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
SPE4A6-26-T-11CZ
SECTION B
PR: 7017703472 PRLI: 0002 CONT’D
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/27/2028 Original Required Delivery Date:02/08/2027
SPE4A6-26-T-11CZ NSN/Part Number: 5310-01-513-5434 Quantity: 159 EA Purchase Request: 7017703472QTY: 667 Delivery: 71 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331529
New
DIBBS
WASHER ASSORTMENT
Solicitation # SPE4A6-26-T-11UD
This contract specifies the procurement of a washer assortment under solicitation SPE4A6-26-T-11UD, with a total quantity of 749 units at a unit price of $749.00, resulting in a total contract value of $560,901. The item, identified by NSN 5310-01-097-9034 and part number ME00607300001, is classified as a commercial item and a critical application item requiring strict adherence to technical and quality standards defined in the DLA Master List of Technical and Quality Requirements. Packaging must comply with MIL-STD-129 and ASTM D3951, with palletization governed by DLA Packaging Requirements, and all containers labeled according to government specifications. The contract mandates zero non-conformances in sampling under MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned specific verification levels or AQLs. Inspection and acceptance occur at destination, with no variance allowed in quantity, and delivery is due within 171 days, with an original required delivery date of February 3, 2027, and a needed ship date of January 31, 2027. The item is to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation procedures governed by DLA procedural notes. This is a total small business set-aside under NAICS code 331529, and all contractor data, including certificates of conformance, must comply with FAR 52.246-15 unless overridden by a quality assurance letter. Proprietary data restrictions apply, and defense information handling protocols are in effect.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 331529
New
DIBBS
Sub-tier Supplier for Raw and Processed Metal MaterialsThe contract is a subcontract awarded by the Defense Logistics Agency under the Department of Defense for the supply of domestically sourced raw and semi-finished metal materials, including steel and aluminum alloys, intended for fabrication and machining operations. The NAICS code 331529 indicates the focus on metal forging and stamping, underscoring the need for materials suitable for high-precision industrial manufacturing applications. The contract was posted on July 31, 2026, and requires all materials to be procured within the United States to ensure compliance with domestic sourcing mandates relevant to defense-grade production. Performance will occur across unspecified locations within the U.S., with no specific place of performance detailed in the provided data. The contract does not specify a solicitation number or set-aside designation, suggesting it may be issued under an existing master agreement or blanket purchase arrangement. The primary objective is to support defense-related manufacturing through a reliable and consistent supply chain of qualified materials, emphasizing quality, traceability, and on-time delivery. The subcontractor is expected to meet stringent material specifications and standards necessary for military and defense applications, though exact technical requirements are not outlined here. The link provided leads to the official DIBBS portal for award details, where further contractual obligations, delivery schedules, and compliance metrics would be accessible to authorized parties.
Defense Logistics Agency

POSTED

5 days ago

DEADLINE

N/A
View Details
NAICS: 331529
New
DIBBS
Supplier of Raw Materials or Components for Guide AssemblyThe contract seeks a supplier to provide defense-grade raw materials, fasteners, or sub-components specifically for use in a guide assembly, all of which must meet stringent MIL-SPEC standards and include full traceability documentation to ensure compliance with military quality and security protocols. The materials required are critical to mission-critical defense systems, necessitating precise material composition, manufacturing controls, and documentation of origin and processing history through every stage of production and delivery. The scope is limited to subcontracted supply, with the end product destined for performance at the specified location in New Cumberland, Pennsylvania, under the oversight of the Department of Defense’s Land Supplier Operations Vehicle Support organization. The solicitation is open for responses until August 10, 2026, with the opportunity posted on July 30, 2026, and is classified under NAICS code 331529 for other fabricated metal product manufacturing. There is no set-aside designation, meaning all eligible suppliers may compete regardless of business size or ownership status. The contract does not include a designated point of contact, and interested parties must rely on the provided DIBBS link for full details, submissions, and updates. Participation requires strict adherence to defense contracting protocols, including the ability to validate compliance with military specifications and undergo potential audits or inspections related to material sourcing and production integrity.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 331529
New
DIBBS
Supply of Raw Materials and Components for Pallet FabricationThe contract requires the supply of military-grade aluminum alloys, composite panels, and fasteners specifically for the fabrication of aircraft pallets, with strict adherence to full traceability requirements and DFARS-compliant sourcing to ensure all materials originate from approved domestic or allied sources. All components must meet rigorous defense standards and be documented throughout the supply chain to guarantee integrity, quality, and compliance with federal regulations governing defense procurement. This is a small business set-aside subcontract under NAICS code 331529, with responses due by August 7, 2026, and performance based in Tracy, California, with a ZIP code of 95304-5000. The solicitation is issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, targeting qualified small businesses to fulfill the requirement. The materials procured will directly support critical military logistics infrastructure, requiring precise specifications, verified documentation, and timely delivery to meet operational readiness goals.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

6 days ago

DEADLINE

in 1 day
View Details
NAICS: 331529
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-10KN
This contract specifies the procurement of 770 flat washers identified by NSN 5310-01-199-1354 and part number NAS1149D0563K, manufactured to meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The item is classified as a critical application component and must comply with NAS1149 Revision 8 and other referenced specifications including FF-W-92C and AN960 Rev 21. Zero tolerance for non-conformances applies during inspection unless otherwise stated, with sampling conducted per MIL-STD-1916 or equivalent zero-based plans; unspecified attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except for defined exceptions such as functional uses in batteries, instruments, or chemical reagents approved by NAVSEA, with mandatory secondary containment for portable devices. Packaging must adhere to MIL-STD-2073-1E with specific preservation methods and MIL-STD-129 marking, and palletization follows DLA packaging guidelines. The item is to be delivered FOB origin to Corpus Christi, Texas, within 171 days of the contract award, with no variance allowed in quantity. Inspection and acceptance occur at destination. The unit of issue is each, priced at $770 per unit for a total value of $592,900. Item Unique Identification is not required per customer request, and DLA procurement rules govern all aspects of fulfillment including transportation, marking, and shipping instructions. The solicitation was issued on July 30, 2026, with responses due by August 7, 2026, under the DoD’s Defense Logistics Agency.
ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 331529
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-10VJ
The contract is for 358 flat washers with NSN 5310-01-417-3933, solicited under SPE4A6-26-T-10VJ by the Department of Defense’s ASC Commodities Division. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, and delivery must be completed within 200 days after delivery order issuance. The item falls under NAICS code 331529 and is subject to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Technical data associated with this item is controlled under ITAR or EAR, prohibiting export or disclosure to foreign nationals without prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 governs compliance. Access to this export-controlled data is restricted to DLA contractors certified under the US/Canada Joint Certification Program, who have completed required training and questionnaire and received DLA approval. Performance is to be delivered to Tracy, California, 95304-5000, with Lisa Harvie identified as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 331529
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-10TE
The contract is for 119 flat washers with part number 52B6178-1 and NSN 5310-01-189-8470, issued under solicitation SPE4A6-26-T-10TE by the ASC Commodities Division of the Department of Defense. Delivery is required within 73 days of award, and the place of performance is New Cumberland, PA with a zip code of 17070-5002. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sampling unless otherwise stated. Item Unique Identification is not required per the customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Covered defense information may apply to this procurement. The item has no shelf life requirement. The supplier is Engineering Systems Co located in Aston, PA, and the primary point of contact is Michael Blain with email and phone provided. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026.
ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 331529
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-10WP
The contract requires the delivery of 5,745 flat washers (NSN 5310015135434, part number NAS1149E0616P) under solicitation SPE4A6-26-T-10WP, with delivery due 71 days after award, FOB origin, to the DLA New Cumberland Facility in Pennsylvania. The item is classified as a critical application and must meet stringent technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951 for packaging. Compliance with MIL-STD-129 is mandatory for all marking and labeling, and palletization must adhere to RP001 DLA Packaging Requirements. Sampling for inspection follows MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise specified, and critical, major, and minor attributes must be verified at AQL levels of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the destination, with the government retaining full authority over quality determination. All packaging and bare items must be physically marked in accordance with RQ017, and government identification must be removed from non-accepted supplies under RQ011. The contract mandates adherence to applicable safety standards, including hazard communication under 29 CFR 1910.1200, and requires submission of Safety Data Sheets for any hazardous materials prior to award. Contractors are prohibited from enforcing internal confidentiality agreements that restrict reporting of waste, fraud, or illegal activity. Invoicing must be submitted electronically via WAWF, and payment will be processed in accordance with streamlined acquisition procedures under FAR 52.213-4, though the exact contract type remains unspecified. The order is subject to zero quantity variance and must be shipped no later than July 14, 2026 to meet the original delivery deadline of October 30, 2026. Offerors must provide a valid UEI and CAGE code and represent their small business status if claiming socioeconomic advantages, with post-award re-representation required under clause 52.219-28. The contract includes clauses on employment eligibility verification, combating human trafficking, equal opportunity, sustainable products, and safeguarding contractor information systems, and incorporates NIST SP
ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 331529
DIBBS
Supply of Specialized Raw Materials or ComponentsThe contract seeks the supply of military-grade metals, damping materials, or fasteners specifically designed for resilient weapon mount assemblies, requiring full traceability and strict compliance with shelf-life protocols. All materials must meet stringent defense standards, with certifications documenting origin, composition, and quality assurance throughout the supply chain. The materials are intended for use in critical defense systems where performance under extreme conditions is essential, and non-compliance with specifications could compromise operational readiness. The solicitation is issued as a subcontract under the NAICS code 331529, managed by the Department of Defense through its ASC SUPPLIER OPER AE AND AF DIV, with performance required at NEW CUMBERLAND, PA, 17070-5002. Responses are due by August 6, 2026, and interested parties must submit proposals through the official DIBBS portal before the deadline. The contract emphasizes accountability, material integrity, and adherence to defense logistics requirements, with no set-aside provisions designated for small or specialized businesses.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

7 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 331529
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-10FB
The contract specifies the procurement of 435 flat washers with NSN 5310-00-013-9992 under solicitation SPE4A6-26-T-10FB, issued by the Department of Defense’s ASC Commodities Division. The item is classified as a critical application item and must comply with SAE AS9549 Revision D dated 11/01/1998, and is subject to all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined. Packaging must follow MIL-STD-2073-1E with specific procedural codes, and marking must conform to MIL-STD-129 without special marking. Palletization must meet DLA packaging requirements, and the delivery is FOB origin with a strict 0% quantity variance. The shipment is destined for the DLA Distribution facility in New Cumberland, PA, with a delivery window of 171 days from the contract award, originally required by September 6, 2027, and a need ship date of January 25, 2027. Inspection and acceptance occur at the destination, and transportation logistics follow DLA procedural notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

7 days ago

DEADLINE

in 1 day
View Details
NAICS: 331529
DIBBS
Raw Material and Metal Stock SupplyThe contract entails the supply of aluminum, steel, or specialty alloy stock materials precisely cut to specified dimensions to meet MIL-SPEC standards for the fabrication of a cover assembly. These materials must adhere to strict military specifications to ensure compatibility, durability, and performance in defense-related applications. The materials are intended for use in manufacturing components that demand high precision and reliability under demanding operational conditions. This is a subcontract awarded under the Department of Defense through the Defense Logistics Agency, with the North American Industry Classification System code 331529 indicating nonferrous metal die casting and related manufacturing processes. The solicitation was posted on July 21, 2026, and performance is expected to align with the needs of federal defense contracts. The contract does not specify a set-aside designation, suggesting it is open to full and open competition, and all materials must be delivered to meet exacting technical requirements without deviation to support downstream assembly and integration processes.
Defense Logistics Agency

POSTED

15 days ago

DEADLINE

N/A
View Details
NAICS: 331529
DIBBS
Raw Material Supply for Metal FabricationThe contract outlines the supply of defense-grade steel, aluminum, or specialty alloys specifically for use in manufacturing piston assemblies, with strict requirements for material traceability and quality assurance. All materials must be accompanied by certified mill test reports and fully compliant with established defense material standards to ensure performance, reliability, and interoperability in critical military applications. The subcontract is issued under the Department of Defense through the Defense Logistics Agency, targeting the NAICS code 331529 for other metal forgings and stampings, indicating the specialized nature of the fabricated components. Performance of this contract involves providing materials that meet exacting defense specifications, with emphasis on documented provenance from raw source to final delivery. While no specific location is designated for performance, the materials are intended for use in defense manufacturing systems where compliance and consistency are non-negotiable. The contract was posted on July 21, 2026, and is accessible via the DIBBS system, indicating formal procurement under U.S. military supply chain protocols. No set-aside provisions are applicable, and the contract is structured as a subcontract likely flowing from a prime contractor engaged in defense production.
Defense Logistics Agency

POSTED

15 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561730
New
DIBBS
Erosion Control and Landscaping
Landscaping Services

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561990
New
DIBBS
Traffic Control and Signage
All Other Support Services

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332312
New
DIBBS
Steel Fabrication and Erection
Fabricated Structural Metal Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541620
New
DIBBS
Environmental Site Assessment and Remediation
Environmental Consulting Services

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 237310
New
DIBBS
Asphalt Paving and Site Surfacing
Highway, Street, and Bridge Construction

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete Supply
Ready-Mix Concrete Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Acceptance Support
Engineering Services

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Shipping to DLA
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details