Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Replacement Parts for Globe Valve (NSN 4810-01-252-2552)

Active

Federal

Response Deadline11/12/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of replacement parts, seals, and gaskets for Globe Valves under NSN 4810-01-252-2552 to support Navsup Weapon Systems Support Mech projects for the Department of Defense. The contractor is responsible for manufacturing or sourcing components that strictly adhere to TDP Version 007 specifications, utilizing specialized polymers or high-grade alloys. All deliverables must be provided as replacement part kits delivered directly to the designated repair facility. Compliance is a critical component of this agreement, requiring the provision of material certifications and Material Safety Data Sheets that meet OSHA/FED STD 313 and 29 CFR 1910.1200 standards for hazardous materials. The opportunity falls under NAICS code 332919, with a response deadline set for November 12, 2026.

General Info

Supply replacement Globe Valve parts for DoD projects per TDP 007 specifications.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Place of Performance

PA, USA

Set-Aside

NONE

Documents

This scope was carved out of N0010427QLA10.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VALVE,GLOBE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 12

Submission deadline

Response Deadline

11/12/2026, 08:30:00 PM UTCin 14 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies replacement parts, seals, and gaskets for prime contractors on Navsup Weapon Systems Support Mech projects. Manufactures or sources components meeting TDP Version 007 specifications using high-grade alloys or specialized polymers. Provides material certifications and MSDS meeting OSHA/FED STD 313 and 29 CFR 1910.1200 for hazardous materials. Delivers replacement part kits to the repair facility.

Similar Contracts

Same NAICS industry code

COUPLING HALF, QUICK

Solicitation # SPE7M3-27-T-0769

This solicitation, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of one quick coupling half, identified by NSN 4730-01-579-8245. The requirement specifies a delivery timeframe of 20 days after order, with an original required delivery date of May 31, 2024. The item is to be delivered FOB Origin to the Armament Inspectorate in Warszawa, Poland. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, specifically prohibiting the use of additive manufacturing unless authorized and restricting the intentional addition of mercury or mercury-containing compounds. Compliance requirements are extensive, including CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Inspection and acceptance are both set at the point of origin, with Certificate of Conformance procedures authorized under FAR 52.246-15. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Balance of Payments Program for quotes exceeding the micro-purchase threshold. The solicitation is open to full and open competition, with specific price evaluation preferences noted for HUBZone small business concerns.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

VALVE STEM, TTV

Solicitation # N0010424QBM87

This solicitation, number N00104-24-Q-BM87, is issued by the Navsup Weapon Systems Support Mech office in Mechanicsburg, PA, for the procurement of one Valve Stem, TTV (NIIN: 016320195). The award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations based on technical compliance, price, and risk assessments from the Supplier Performance Risk System. The procurement is a DO rated order for national defense and emergency preparedness, and it requires adherence to the Buy American and Balance of Payments Program. The contractor must comply with strict technical and quality standards, including the Individual Repair Part Ordering Data (IRPOD) and higher-level quality requirements under MIL-I-45208. Packaging must follow MIL-STD-2073-1 and MIL-STD-129, with specific requirements for DLR labels and unique item identification per MIL-STD-130. Inspection and acceptance will occur at the origin. Payment and receiving reports must be processed through the Wide Area WorkFlow (WAWF) system. The response deadline for quotes is November 30, 2026, and submissions are accepted via email or NECO.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Solicitation # N0010426QFE70

This fixed-price solicitation from NAVSUP Weapon Systems Support Mechanicsburg is for the procurement of a Globe Valve (NSN 4820-01-211-8826) designated as a Critical Safety Item and Special Emphasis Material Level I. Due to the high risk associated with failure in crucial shipboard systems, the contract mandates strict quality assurance, comprehensive material traceability, and adherence to TDP Version 013. The scope includes the delivery of the valve to the Portsmouth Naval Shipyard within 365 days, with a requirement for a Certificate of Compliance and detailed test certifications submitted via Wide Area Workflow for review and acceptance prior to shipment. Technical requirements specify the use of ASTM-A276 or ASTM-A479 UNS S31600 material for key components, including the body, bonnet, union nut, and stem assembly. The contractor must maintain a quality system compliant with ISO-9001 and follow rigorous inspection standards for threads, pressure tests, and non-destructive testing. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Additionally, the contractor must comply with strict cybersecurity reporting under clause 252.204-7012 and follow MIL-STD-2073 and MIL-STD-129 for packaging and marking.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

47--CONNECTION,FLEXIBLE

Solicitation # N0010426QYAGN

Solicitation NO0014-26-Q-YAGN is a fixed-price request for quotations issued by NAVSUP Weapon Systems Support Mechanicsburg for the manufacture and delivery of flexible connections, specifically NSN 4730-01-144-5975. The required items must adhere to the design represented by Cage Code 18444, reference number 299941-100, and must be entirely mercury-free for use on submarines and surface ships. The government retains an option to order an additional quantity of up to 100 percent of the original order for 365 days after receipt. The closing date for this solicitation has been amended to October 19, 2026. The contract mandates strict quality and technical standards, including physical identification per MIL-STD-130 and packaging in accordance with MIL-STD-2073. All deliveries are FOB Destination with a delivery window of 180 days. Offerors who are not the Original Equipment Manufacturer must provide the OEM's company name, CAGE code, and a signed letter of authorization. Evaluation will be conducted using the Supplier Performance Risk System to assess item, price, and supplier risk, alongside Buy American and Balance of Payments Program policies. Payment and receiving reports must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 2 months

PARTS KIT,BALL VALV

Solicitation # N0010426QNE98

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of 175 ball valve parts kits (NSN 4820-01-425-4163). The material is designated as Special Emphasis Level I, meaning it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. Consequently, the contract mandates strict quality assurance, including a requirement for the contractor to maintain a quality system compliant with ISO-9001 or MIL-I-45208. The kits consist of a ball made from SAE-AMS-6931 and seats made from MD71-GG Mearthane, both requiring rigorous quantitative chemical and mechanical analysis. Key technical requirements include hydrostatic testing for each ball at 1875 PSI for 30 minutes, with dye penetrant inspection as an acceptable substitute for manufacturers lacking test fixtures. All welding and brazing must adhere to specific S9074 and 0900-LP standards, requiring prior approval of qualification data. The contractor must submit a Certificate of Compliance and all objective quality evidence via the Wide Area Workflow (WAWF) system to Portsmouth Naval Shipyard for review and acceptance before shipping. Final inspection follows a zero-defect acceptance policy, with sampling based on ANSI/ASQ-Z1.4. The government intends to make a single fixed-price award based on the most advantageous offer, prioritizing past performance over price. Packaging must comply with MIL-STD-2073-1, and all shipments must be prepaid to the destination. Offerors must provide a Quality Assurance Manual to be eligible for award and must certify that the materials are mercury-free. All configuration changes or deviations require formal review and approval by the Contracting Officer through Engineering Change Proposals or waiver requests.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month

DELTA-P IND ASSY

Solicitation # SPRMM127QKA47

Solicitation SPRMM1-27-Q-KA47 is issued by the Defense Logistics Agency Weapons Support Mechanicsburg for the manufacture and delivery of one DELTA-P IND ASSY, identified by NIIN 016642911. The item must be produced according to the design represented by Cage Code 99517, reference number 12052305-005. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer, with evaluations based on LPTA criteria and risk assessments from the Supplier Performance Risk System. The procurement is categorized under NAICS code 332919 with a small business size standard of 750 employees. Key technical requirements include strict adherence to MIL-STD-130 for physical identification and a mandatory mercury-free certification for use on submarines and surface ships. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, with specific DLR labeling requirements for shipping containers. Inspection and acceptance will occur at the contractor's or subcontractor's plant. All invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Offerors must provide CMMC Level 1 self-certification and identify the Original Equipment Manufacturer and CAGE code if they are not the manufacturer. Delivery is destined for the Pearl Harbor Naval Shipyard IMF.

SPRMM1 DLA Mechanicsburg

POSTED

about 8 hours ago

DEADLINE

in about 1 month

STEM,FLUID VALVE

Solicitation # N0010426QZB64

Solicitation N00104-26-Q-ZB64 is a fixed-price request for quotations from NAVSUP Weapon Systems Support for the manufacture of a Fluid Valve Stem (NSN 4820-01-496-3210). This item is designated as a Critical Safety Item and Special Emphasis Material Level I, as its failure could result in catastrophic loss of life or the ship. The government will provide the necessary barstock (NIIN 014959538X2) as Government Furnished Material, and the contractor must maintain strict heat traceability throughout production. The stem must be manufactured in accordance with NAVSEA drawing 803-5959307 and related specifications, using ASTM-B348 Grade 23 or SAE-AMS-4931 material. Weld repairs on titanium parts are strictly prohibited. The contract mandates rigorous quality assurance and certification standards, requiring a quality system compliant with ISO-9001 and specific calibration standards such as ISO-10012 or ANSI-Z540.3. Key requirements include dye penetrant inspection, a zero-defect lot acceptance policy, and the submission of a comprehensive Certificate of Compliance and test results via the Wide Area Workflow system prior to shipment. All deliverables must be preserved and marked according to MIL-STD-2073 and MIL-STD-129. Award will be made to the most advantageous offeror, with past performance weighted as more important than price.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

48--ACTUATOR,HYDRAULIC-, IN REPAIR/MODIFICATION OF

Solicitation # N0010427QZA04

This fixed-price contract, solicitation number N00104-27-Q-ZA04, is issued by the Navsup Weapon Systems Support Mech for the manufacture or refurbishment of hydraulic actuators. The scope of work requires the contractor to inspect, clean, and refurbish the items in accordance with Drawing 30093-40940 and MS NO. 5640-081-346 REV A CHG-4. Final delivery of the material must be completed within 86 days of the contract's effective date, with the ship-to destination located in Kittery, Maine. The award is designated as a DO rated order under the Defense Priorities and Allocations System, signifying its importance for national defense. Key requirements include physical identification per MIL-STD-130 and strict adherence to preservation, packaging, and marking standards such as MIL-STD-2073-1 and MIL-STD-129. If additive manufacturing is utilized, the contractor must provide comprehensive traceability data via DD1423 reporting. The contract includes a one-year warranty for supplies of a noncomplex nature and mandates the use of the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports. Evaluation for award is based on the Supplier Performance Risk System, assessing item, price, and supplier risk. All transportation to and from the repair site is paid for by the US Navy.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Solicitation # N0010426QNE90

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of a Valve Stem (NSN 1HM 4820-01-548-5698) to be delivered within 120 days. The item is designated as Special Emphasis material (Level I, Scope of Certification) because it is used in crucial shipboard systems where failure could result in catastrophic loss of life or vessel. Due to this criticality, the contract mandates strict quality controls, including a requirement for the contractor to maintain an ISO-9001 quality system and undergo Government Quality Assurance at source via the Defense Contract Management Agency. Technical requirements specify the use of ASTM-B150 Alloy C63200, mandatory oxygen cleaning per MIL-STD-1330, and a strict mercury-free composition. The award will be made to the offeror determined to be most advantageous to the Government, with past performance weighted as more important than price. Key deliverables include the hardware and comprehensive test certifications submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards, with specific red labeling for Level 1 materials. The procurement is DO certified for national defense under the Defense Priorities and Allocations System and is conducted as a simplified acquisition.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month

VALVE, CARTRIDGE

Solicitation # N0010427QFA13

This contract, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a solicitation for the manufacture or refurbishment of two cartridge valves (NSN 4820-01-646-8015) in accordance with drawing 237914-0002. The award will be made to a single offeror based on a trade-off where past performance is considered more important than price. The contract is designated as a DO-rated order for national defense use and is issued under Emergency Acquisition Flexibilities. Final delivery of the material is required within 365 days of the contract's effective date, with FOB Destination terms. Key technical requirements include strict adherence to MIL-STD-130 for marking, MIL-STD-2073 for packaging, and MIL-STD-1330 for oxygen cleaning. The contractor must provide a one-year warranty from the date of delivery and submit certification data CDRLs at least 20 days prior to scheduled delivery. If additive manufacturing is utilized, a Master Component Traceability Ledger must be maintained and submitted. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and reporting, and compliance with Buy American and Balance of Payments program certifications. Inspection and acceptance will occur at the origin.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

VALVE,REGULATING,FL

Solicitation # SPRMM127QKA27

This fixed-price solicitation, issued by DLA Mechanicsburg under solicitation number SPRMM127QKA27, requires the manufacture and delivery of two regulating valves (VALVE,REGULATING,FL) based on the design represented by Cage Code 99643, reference number 84140-1. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) criteria, with a 10 percent price evaluation preference applied to HUBZone small business concerns. Offerors must be authorized distributors of the original manufacturer and are prohibited from providing refurbished material. Technical drawings are not available for this item, and the contractor is responsible for ensuring the product meets all quality requirements, including physical identification per MIL-STD-130 and packaging according to MIL-STD-2073-1. The contract mandates the use of PIEE-WAWF for the electronic submission of invoices and receiving reports, and any requests for modifications must be processed through the Workflow Pro (WFP) Mod Assist module. Inspection and acceptance will occur at the origin. Key compliance requirements include CMMC Level 1 self-certification, adherence to the Buy American Act, and strict prohibitions relating to Chinese military companies. Contractors must maintain inspection records for 365 days following final delivery and are required to provide the Original Equipment Manufacturer's CAGE code and part number when submitting quotes.

SPRMM1 DLA Mechanicsburg

POSTED

about 8 hours ago

DEADLINE

in about 1 month

NOZZLE,VALVE — 4820017141239 — SPRPA127QXA57

Solicitation # SPRPA127QXA57

Solicitation SPRPA127QXA57, issued by DLA Aviation at Philadelphia for the Department of the Navy, seeks a single award for the supply of nine valve nozzles (NSN 4820-01-714-1239). This procurement is designated as a Critical Safety Item (CSI) and requires the contractor to maintain an ISO9001 quality management system. Delivery is required within 90 days to DLA Distribution Cherry Point, North Carolina, with FOB Destination terms. Inspection and acceptance will occur at the origin. The award will be based on the most advantageous offer, with past performance weighted as more important than price. The government will utilize the Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk. Strict packaging and marking standards are mandated, including compliance with MIL-STD-2073-1 and MIL-STD-129, with specific requirements for DLR labels and electrostatic discharge protection where applicable. Payment will be processed electronically via Wide Area WorkFlow (WAWF). The solicitation incorporates various FAR and DFARS clauses, including the Buy American program and cybersecurity requirements under DFARS 252.204-7012.

Pa DLA Aviation At Philadelphia

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Military Grade Packaging and Marking ServicesThis subcontract for Military Grade Packaging and Marking Services involves performing final packaging and marking for prime contractors on DLA and Navy supply contracts. The scope of work requires packaging items according to MIL-STD-2073-1 and marking all unit, intermediate, and shipping containers in compliance with MIL-STD-129. Additionally, the contractor must apply DLR Labels using industrial labeling systems and MIL-SPEC materials. The project entails the delivery of three packaged and labeled units to DLA Distribution facilities located in Pennsylvania and California under FOB Destination terms. This effort is managed under the Department of Defense through the Navsup Weapon Systems Support Mech, falling under NAICS code 561910.

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

Precision Gauge Components SupplyThe Precision Gauge Components Supply subcontract involves the provision of raw materials and sub-components for prime contractors supporting DLA and Navy supply contracts. The scope of work includes the sourcing and machining of high-tolerance metal components, such as precision springs, dial faces, and housings, utilizing high-grade alloys or plastics as specified in the Technical Data Package. Managed under the Department of Defense through the Navsup Weapon Systems Support Mech, the contract requires strict adherence to the Buy American Act and the provision of Material Safety Data Sheets in accordance with OSHA and FED STD 313 standards. The subcontractor is responsible for delivering all finished machined components directly to the prime manufacturer.

POSTED

about 8 hours ago

DEADLINE

Pressure Dial Gage Fabrication and AssemblyThis subcontract involves the fabrication and assembly of three Pressure Dial Gages (NIIN 014184760) for prime contractors supporting DLA and Navy supply contracts under the Department of Defense. The scope of work includes the manufacture of gage internals and housings, calibration of pressure measurement mechanisms, and the assembly of needles and dial faces in strict accordance with TDP Version 012. The contractor is responsible for performing physical identification marking per MIL-STD-130 and conducting final quality assurance testing. Execution of this contract requires the use of precision machining tools and specialized calibration benches to ensure all deliverables meet the required technical specifications.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 8 hours ago

DEADLINE

Supply of IDEXX Reagent Powder (WCLS200I)This subcontract involves the supply of proprietary reagent powder, specifically Part Number WCLS200I (NSN 6640-01-520-7401), to prime contractors supporting Department of the Navy laboratory projects. The selected provider must be an authorized distributor for IDEXX products to procure the materials from IDEXX Distribution Corp. The scope of work includes the delivery of 60 packages, with a critical requirement to manage shelf-life sensitive materials to ensure all products have usable dates upon delivery. Managed under NAICS code 423450 for the Navsup Weapon Systems Support Mech within the Department of Defense, the contract emphasizes strict adherence to packaging and quality standards. Interested parties should note the response deadline of November 30, 2026, to provide the necessary proprietary supplies for these government laboratory operations.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Supply of Replacement Parts for NRP Data KeyboardThis subcontract, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, involves the supply of replacement parts for NRP data keyboards. The selected provider will be responsible for sourcing and delivering authentic or approved electronic components, switches, and circuit boards that strictly adhere to OEM specifications and technical orders to support prime contractors on repair projects. A critical requirement of this agreement is the certification of domestic origin in compliance with DFARS 252.225-7000 and 252.225-7035. The contract falls under NAICS code 423610 and requires the delivery of high-quality replacement components or sub-assemblies. The response deadline for this opportunity is December 28, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

Electronic Repair and Modification of Data Keyboard (NSN 7025-01-626-6575)This subcontract, issued by the Navsup Weapon Systems Support Mech for the Department of Defense, involves the electronic repair and modification of a specific data keyboard identified by NSN 7025-01-626-6575. The selected contractor will be responsible for the complete teardown, evaluation, and repair of the unit to identify faults and execute necessary modifications. All work must be performed in accordance with technical orders, drawings, and manufacturing operations, requiring the use of specialized electronic component-level repair facilities. The final deliverable is one fully repaired and modified keyboard that complies with MIL-STD-2073 packaging standards. This project falls under NAICS code 811212 and is intended for prime contractors supporting Department of Defense electronic hardware projects. The response deadline for this opportunity is December 28, 2026.

Computer and Office Machine Repair and Maintenance

POSTED

about 8 hours ago

DEADLINE

Supply of Valve Stem, TTV (NSN 016320195)This subcontract, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, requires the procurement of one Valve Stem, TTV (NSN 016320195) for use in Department of the Navy ship component projects. The selected provider is responsible for manufacturing or sourcing the component in strict accordance with TDP Version 002, including all IRPOD and STR requirements. The scope of work includes performing necessary welding and Non-Destructive Testing (NDT) as specified in the technical documentation. Additionally, the contractor must ensure that the item is packed and marked according to MIL-STD-2073, MIL-T-17286, and MIL-STD-129 standards prior to final delivery.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Supply of Raw Material for NAVSEA Spacer 5671439

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Manufacture of 2nd Stage Tie Rod Spacers

POSTED

about 8 hours ago

DEADLINE

Supply and Manufacture of Cartridge Valves (NSN 4820-01-646-8015)This subcontract involves the manufacture or refurbishment of two cartridge valves (NSN 4820-01-646-8015) for prime contractors supporting Department of the Navy projects. The scope of work requires the production of new units or the restoration of existing valves to exact technical specifications through precision machining. The contractor is responsible for providing Certification Data CDRLs and Item Unique Identification reporting via WAWF, while ensuring full compliance with the Buy American and Balance of Payments Program requirements. This effort is managed under the Department of Defense through the Navsup Weapon Systems Support Mech agency.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

Manufacture of Hexagon Cap Screws (NSN 5305-01-608-8552)

Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 2 months

ASTM-A193 Grade B7 Machine Bolt SupplyThis subcontract involves the supply of high-strength machine bolts for prime contractors working on Department of the Navy projects under the Navsup Weapon Systems Support Mech. The contractor is responsible for manufacturing or procuring bolts with NSN 5306-01-345-1418 that strictly conform to ASTM-A193 Grade B7 Chromium-Molybdenum-Steel and TDP Version O02 specifications. Because these components are classified as Critical Safety Items, the contractor must provide quantitative chemical and mechanical analysis while maintaining rigorous heat and lot traceability. The final delivery requirements include seven machine bolts accompanied by comprehensive material certification reports and a detailed Inspection and Test Plan.

Fabricated Structural Metal Manufacturing

POSTED

about 8 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

48--VALVE,GLOBE

Solicitation # N0010426QNE54

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

48--VALVE REGULATING SY, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYACP

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

47--HOSE ASSEMBLY,NONMETAL

Solicitation # SPE7M1-27-U-0941

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

RFQ: N00383-27-Q-B054; FMS Repair; NIIN: 009082931

Solicitation # N0038327QB054

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # N0010426QEG24

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QEC04

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Solicitation # N0010427QLA10

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

48--STEM-DISC ASSY

Solicitation # N0010427RBB07

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of Fixed Wire Wound Resistors (NSN 5905-01-06-19566)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

ADAPTER, STRAIGHT, HOSE TO BOSS

Solicitation # SPE7M0-26-Q-1138

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7M3-27-T-0718

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

48--GUIDE,VALVE STEM

Solicitation # N0010426QNE38

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS