Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Respirator Air Filters (NSN 4240012492573)

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply and delivery of 1,824 individual respirator air filters identified by NSN 4240012492573 to the Defense Logistics Agency in Bremerton, Washington. The requirement is structured as a small business set-aside under the SBA program, exclusively available to total small businesses as defined by FAR 19.5, with the NAICS code 339113 indicating manufacturing of other miscellaneous fabricated metal products. All items must comply with strict military packaging standards, hazard communication regulations, and delivery specifications to ensure safety, traceability, and readiness for use by military personnel. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and is administered under the Department of Defense through the Construction & Equipment MRO Service I office. The place of performance is clearly designated as Bremerton, with a zip code of 98314-6001, underscoring the logistical and geographic specificity of the delivery requirements.

General Info

1,824 respirator filters to be delivered to Bremerton, WA, under small business set-aside for DoD.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

BREMERTON, WA, 98314-6001, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of 1,824 individual respirator air filters (152 PG) to DLA in Bremerton, WA, with compliance to military packaging, hazard communication, and delivery requirements.

Similar Contracts

Same NAICS industry code

Respirator Cartridge SupplyThe contract requires the supply and delivery of military-spec air-filtering respirator cartridges identified by NSN 4240011773454, meeting all technical and packaging standards outlined in MIL-STD-129, ASTM D3951, and FED-STD-313. These cartridges must be delivered to NAVSUP FLC Diego Garcia within twenty days of order placement, ensuring timely support for operational readiness. The packaging and labeling must strictly adhere to federal and military specifications to guarantee compatibility with logistics and distribution systems. The solicitation is classified as a subcontract under NAICS code 339113, issued by the Defense Logistics Agency on behalf of the Department of Defense. The response deadline is August 3, 2026, with the solicitation posted on July 22, 2026. The place of performance is listed as FPO with ZIP code 96595-0004, indicating delivery to a military postal location. No set-aside designation or point of contact details are provided, and access to the full solicitation is available through the DIBBS portal using the provided link.

Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

Industrial Safety Eyewear SupplyThe contract entails the supply of industrial-grade spectacle and goggle lenses designed to meet stringent safety and performance requirements, specifically aligned with DLA packaging, labeling, and hazardous materials standards. These lenses are intended for use in defense and industrial environments where protection against impact, chemical exposure, and other occupational hazards is critical. The solicitation is structured as a subcontract under NAICS code 339113, which categorizes it within the eyewear and optical goods manufacturing sector, ensuring the supplier has the technical capability and regulatory compliance necessary for defense-related procurement. All delivered products must adhere to exacting DLA specifications for packaging and hazardous material handling to ensure safe transport and storage across military and government installations. The response deadline for submissions is August 3, 2026, with the solicitation posted on July 22, 2026, providing interested parties sufficient time to prepare proposals. The place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, indicating that delivery logistics must be coordinated to meet the requirements of the DDSP New Cumberland Facility under the Department of Defense. Although no specific point of contact or set-aside classification is provided, the contract is managed by the Defense Logistics Agency’s network, implying adherence to federal acquisition regulations and potential preference for qualified small businesses or certified suppliers. Bidders must access the official DIBBS portal via the provided UI link to obtain full technical specifications and submit proposals in compliance with DLA protocols.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

Industrial Spectacles Supply and DeliveryThe contract entails the supply and delivery of 121 units of industrial spectacles identified by NSN 4240016629450, with full compliance required for packaging, labeling, and hazardous materials documentation to ensure safe handling and regulatory adherence. These spectacles are intended for use in industrial settings and must meet all specified technical and safety standards without exception. The solicitation is structured as a subcontract under the NAICS code 339113, which corresponds to eyewear manufacturing, and is managed by the Department of Defense through its DDSP NEW CUMBERLAND FACILITY located in NEW CUMBERLAND, Pennsylvania, with a zip code of 17070-5002. The posting date is July 22, 2026, and all responses must be submitted by August 3, 2026, with no set-aside provisions specified, meaning any qualified vendor may bid. The contract is accessible through the DIBBS system, and full compliance with delivery timelines, documentation, and packaging requirements is mandatory for award consideration.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

Supply of Lint Filter Bags (NSN: 3510-01-170-1099)The contract requires the manufacture or supply of 56 units of FILTER, LINT BAG with part number 62-150-2, fully compliant with DLA technical specifications. Each unit must be properly packaged and labeled according to federal standards, ensuring readiness for immediate use upon delivery. The finished products are to be delivered to Tracy, California, with the zip code 95304-5000 specified as the place of performance. This is classified as a subcontract under NAICS code 339113, indicating it falls within the category of other miscellaneous fabricated metal product manufacturing. The solicitation was posted on July 22, 2026, and all proposals must be submitted by August 3, 2026. The awarding organization is the Department of Defense under the Construction & Equipment Containers division, and the contract is managed through the DIBBS system.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 13 hours ago

DEADLINE

BANDAGE, GAUZE, SELF-The contract pertains to the procurement of self-adherent gauze bandages, 3 inches by 4 yards in length, made of cotton elastic material, individually packaged, and supplied in cases of 16 rolls each. The product is black in color and must comply with all technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must adhere to the latest DLA packaging standards, and all items must be marked in accordance with the Medical Marking Standard No. 1, including proper identification of the NSN and part number: 6510-01-522-7376. Bidders are required to specify the source and part number being offered, and all non-accepted supplies must have government identification removed prior to delivery. The contract is solicited under SPE2DS-26-T-259X, with a response deadline of July 28, 2026, and requires delivery within 20 days of award to Fort Bliss, Texas. The purchasing agency is the Department of Defense, Medical Supply Chain, and the point of contact for inquiries is Anh Lam.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

SHIELD, EYE, SURGICALThe contract specifies the procurement of four units of SHIELD, EYE, SURGICAL, a rigid combat eye shield designed for surgical use, each containing a FOX eye shield, a 6-inch hydrogel disc, and two 4x4 inch gauze pads. The product is vacuum-sealed, sterile, and measures 4 x 2 x 0.25 inches weighing 0.5 ounces. It is classified as a TYPE I (CODE Q) item with a non-extendable shelf life of 36 months. All units must be individually sealed in appropriate containers to prevent damage and packed in commercial exterior shipping containers that ensure safe, cost-effective delivery to Wright Patterson AFB, Ohio, with delivery due within 20 days of award. Packaging and marking must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and bidders must provide the source and part number being supplied. The item is identified by NSN 6515-01-590-2668 under solicitation SPE2DS-26-T-260F, subject to DLA’s Master List of Technical and Quality Requirements, and falls under NAICS code 339113. Government identification must be removed from non-accepted supplies, and covered defense information may apply. The solicitation was posted July 22, 2026, with a response deadline of July 28, 2026, and the primary point of contact is Chandler Alvarez of the Department of Defense’s Medical Supply Chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

LIFE PRESERVER, UNDEThis contract is for the procurement of 81 units of the UNDERARM LIFE PRESERVER, identified by NSN 4220-01-524-5323 and part number TFSS-5326-C/GN, supplied by PECI FLOATATION LLC. The item is classified as a commercial product and must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific packaging codes and hazardous material handling procedures outlined in RP001 and IP025, including special requirements tied to STO ZD072 for hazmat. The delivery is FOB destination with no variance allowed in quantity, and the contract requires delivery within 58 days to the designated receiving warehouse in Tracy, California. All hazardous materials associated with this item must be accompanied by Safety Data Sheets formatted in compliance with 29 C.F.R. 1910.1200 and OSHA’s Globally Harmonized System, along with approved HCS labels. Suppliers are required to train employees on these regulations and must not include asbestos as defined in FED-STD-313 or intentionally add mercury or mercury-containing compounds, except for specified functional uses in batteries, instruments, or weapon systems, where secondary containment and shockproofing are mandatory per NAVSEA 5100-003D. The contract mandates submission of documentation for source approval, and all supplies must eliminate government identification if rejected. The original required delivery date is October 31, 2026, with a need ship date of March 27, 2026, and the solicitation closed on August 3, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 13 hours ago

DEADLINE

SPLINT, HANDThe contract pertains to the procurement of a left-handed cock-up hand splint made of canvas, featuring a malleable aluminum insert, hook and pile closure, and flannel lining, with manufacturer part number T85-0771-S-LT supplied by Truform Orthotics & Prosthetics Co. and Surgical Appliance Industries Inc. The item is regulated by the FDA and must comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. Packaging must follow commercial standards as specified, with each unit sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery at the lowest freight cost. All items must be marked per Medical Marking Standard No. 1, replacing MIL-STD-129, and may be subject to Covered Defense Information requirements. The National Stock Number is 6515-01-156-2468 with a unit of issue of each, ordering five units at $5.00 per unit for a total of $25.00. Delivery is required within 42 days FOB destination with zero quantity variance permitted, and inspection and acceptance occur at the destination point. The solicitation number is SPE2DS-26-T-260B, issued by the Department of Defense under NAICS 339113, with a response deadline of July 28, 2026, and delivery to APO, ZIP 09227-0000, with Chandler Alvarez as the primary point of contact.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

CASSETTE, FILTERThe contract specifies the procurement of 5 units of a cassette filter with a 5.0 micron rating, white polypropylene, 25mm disk format, identified by NSN 6640-01-492-5120. Each unit consists of 100 disks and must be packaged in sealed commercial unit containers that protect against damage, with shipping containers compliant with commercial standards and capable of secure delivery via common carrier at the lowest cost to the designated delivery point at MCBC Kāneʻohe Bay, Hawaii. All packaging and marking must adhere strictly to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard must be obtained directly from DLA Troop Support. The technical and quality requirements referenced under R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Bidders must clearly identify the source and part number of the item being offered, and all supplies must be free of government identification if not accepted. The contract includes provisions for covered defense information and is issued under solicitation SPE2DH-26-T-5394 with a response deadline of July 29, 2026, and a required delivery schedule of 20 days after award.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 13 hours ago

DEADLINE

LENS, SPECTACLES, INDUSTThis contract specifies the procurement of industrial lenses and goggles under NSN 4240-01-583-5748, with a total quantity of 21 packages, each containing 10 units, for a total of 210 individual items. The unit of issue is package (PG), and deliveries must be made FOB origin within 57 days of contract award, with a firm delivery date of October 4, 2026. The items must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951; packaging must adhere to MIL-STD-129 labeling and RP001 packaging requirements. If the material is classified as hazardous under FED-STD-313, it must be packaged per TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is permitted. All packaging must be palletized according to DLA standards, and no government identification is to be removed from non-accepted supplies. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation and shipping instructions governed by DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE8E6-26-T-3808, with a response deadline of August 3, 2026, and is subject to strict zero variance tolerance on quantity. The supplier identified is EYE SAFETY SYSTEMS INC with part number 740-0421, and any covered defense information is subject to applicable security requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

APPLICATOR, DISPOSABLEThe contract specifies the procurement of a disposable 6-inch wooden rod applicator, sterile and packaged two per packet with 100 packets per unit of issue, supplied under NSN 6515-00-564-8242 and identified by part numbers 36737 from REDI PRODUCTS, INC. or MDS202000Z from MEDLINE INDUSTRIES, LP, among other approved vendors. All units must be commercially packaged in sealed containers to prevent damage and shipped in exterior containers meeting commercial standards for safe, cost-effective delivery to Fort Bliss, Texas, with delivery required within 20 days FOB destination. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all documentation must adhere to MIL-STD-2073-1E. The item is regulated by the FDA, and bidders must clearly state the manufacturer and part number being offered. Mercury or mercury-containing compounds are strictly prohibited unless exempted for specific functional uses. The supply is designated as a Fleet Prime Vendor item and subject to DLA’s Master List of Technical and Quality Requirements, with full compliance mandatory. The contract permits no quantity variance and requires inspection and acceptance at the destination point.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

PUTTY, HAND THERAPYThe contract is for the procurement of one unit of Putty, Hand Therapy, identified by NSN 6530-01-688-6932, a green, medium density, 16-ounce latex-free and non-toxic therapy product designed to aid in the rehabilitation of injuries affecting the fingers, hands, and forearm muscles through targeted muscle strengthening. The product comes in a plastic case with an attached cover and is intended for use in medical therapy settings. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must meet DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Covered defense information provisions are potentially applicable, and bidders must clearly state the source and part number being supplied. The solicitation, issued under SPE2DH-26-T-5391, was posted July 22, 2026, with responses due by July 29, 2026, and requires delivery within five days of award to Fort Bliss, Texas, 79918-0000. The contracting activity originates from the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

Hazardous Materials Compliance and LabelingThis contract requires strict adherence to hazardous materials compliance standards, mandating the correct application and management of hazard warning labels and Safety Data Sheets in accordance with DFARS 252.223-7001 and OSHA 29 CFR 1910.1200. The work involves ensuring all hazardous materials used or handled under the subcontract meet federal regulatory requirements for labeling, documentation, and information dissemination to protect worker safety and regulatory compliance. The subcontract falls under NAICS code 541690 and is issued by the Department of Defense under the CONTRACTATION & EQUIPMENT MRO SVC I contract vehicle, with responses due by July 29, 2026. The place of performance and specific location details are not provided, but the obligation extends to all sites where covered materials are present, requiring consistent and auditable processes across operations.

Other Scientific and Technical Consulting Services

POSTED

about 13 hours ago

DEADLINE

Supply Chain Traceability and Documentation ManagementThe contract requires the provision of full supply chain traceability documentation for navigational lights, ensuring complete compliance with Department of Defense logistics standards and Defense Logistics Agency reporting requirements. This includes maintaining detailed records from raw material sourcing through final delivery to verify authenticity, origin, and chain of custody, with all documentation aligned to DLA’s mandated formats and submission protocols. The work is classified as a subcontract under NAICS code 541611, with a specific deadline for response set for July 29, 2026, and the solicitation posted on July 22, 2026. Performance is tied to defense infrastructure, though the exact place of performance is unspecified, and the contracting office is part of the Construction & Equipment MRO Svc I under the Department of Defense. All deliverables must meet rigorous defense-grade accountability standards without deviation.

Administrative Management and General Management Consulting Services

POSTED

about 13 hours ago

DEADLINE

Navigational Light Supply and DeliveryThe contract involves the procurement and delivery of 16 units of navigational lights identified by NSN 6220-22-618-1054, with strict adherence to all Department of Defense packaging, marking, and hazardous materials handling requirements as defined by the Defense Logistics Agency. All units must meet full compliance standards to ensure safe transportation, proper identification, and regulatory conformity throughout the supply chain. The solicitation is categorized as a subcontract under NAICS code 335139, managed by the Department of Defense under the Construction & Equipment MRO Service I office. The request was posted on July 22, 2026, and responses are due by July 29, 2026, with performance expected to align with DLA logistics protocols despite the absence of specified delivery locations or point of contact details.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supplier of Raw Materials (Aluminum or Stainless Steel Blanks)The contract seeks suppliers of military-spec aluminum or stainless steel blanks for the production of government identification plates, requiring full traceability and certified documentation for all materials provided. Materials must meet stringent military standards and be accompanied by verifiable certifications ensuring compliance with quality, composition, and origin requirements essential for defense applications. The blanks are intended for use in a critical manufacturing process governed by federal procurement protocols, and suppliers must demonstrate capability to consistently deliver certified, high-integrity raw material blanks. Performance is centered at Hill Air Force Base with a zip code of 84056-5734, and the solicitation is open under the NAICS code 332322 for specialty forgings and stampings. Subcontractors are invited to respond by the deadline of August 3, 2026, with no set-aside designation applied, meaning all eligible entities may bid. The procurement is managed by the Department of Defense under the Construction & Equipment MRO SVC I organization, and all submissions must align with the technical and compliance expectations outlined in the DIBBS system listing for solicitation SPE8E926T3234.

Sheet Metal Work Manufacturing

POSTED

about 13 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract seeks a subcontractor to identify and prepare Safety Data Sheets for hazardous materials used in manufacturing or packaging operations, ensuring full compliance with OSHA and Defense Logistics Agency standards. The work is performance-based and requires precise documentation practices to meet federal regulatory requirements, with a focus on accuracy, timeliness, and alignment with current hazardous material handling protocols. The place of performance is specified as Hill Air Force Base, Utah, with the entire scope of work tied to supporting defense-related manufacturing or packaging activities at that location. The solicitation is classified under NAICS code 541690 for other scientific and technical consulting services and is posted under the Department of Defense’s Construction & Equipment MRO SVC I contract vehicle. Responses are due by August 3, 2026, with no set-aside designation indicated, meaning all eligible entities may submit proposals. While no point of contact is listed in the data, all submissions must adhere to DLA’s electronic procurement system and be submitted via the provided DIBBS portal link. The requirement emphasizes regulatory compliance, technical precision, and operational readiness to maintain safety and continuity in defense logistics and production environments.

Other Scientific and Technical Consulting Services

POSTED

about 13 hours ago

DEADLINE

Supply Chain Compliance & Cybersecurity Monitoring (CDI Safeguarding)This contract requires the implementation and continuous monitoring of NIST SP 800-171 security controls to protect Covered Defense Information (CDI) throughout the supply chain. The contractor must ensure full compliance with all required cybersecurity measures, including the prompt reporting of any cyber incidents affecting CDI, and must flow down these same security requirements to all subcontractors and tiered suppliers. The work is focused on safeguarding sensitive defense data and maintaining a secure information environment in alignment with Department of Defense standards, with performance centered at Hill Air Force Base, Utah. The contract is structured as a subcontract under a broader DoD acquisition and falls under NAICS code 541512 for computer systems design services. Respondents must submit proposals by August 3, 2026, and the effort will be managed under the DIBBS procurement system linked to solicitation SPE8E926T3234.

Computer Systems Design Services

POSTED

about 13 hours ago

DEADLINE

Packaging and Labeling Compliance for Government ShipmentThe contract requires full compliance with DLA’s RP001 standard for the military-grade packaging and labeling of identification plates, encompassing the use of approved protective materials, accurate hazard labeling, and complete documentation to ensure safe and regulated handling throughout transit. All work must adhere to federal military specifications for durability, environmental resistance, and traceability, with final delivery directed to Hill AFB, Utah, at the designated zip code. The submission deadline is August 3, 2026, and the opportunity is structured as a subcontract under NAICS code 531060, which pertains to commercial and industrial machinery and equipment rental and leasing, indicating the nature of the services involved in logistics and containment solutions. The solicitation originates from the Department of Defense under the Construction & Equipment MRO SVC I program, and interested parties must respond via the provided DIBBS portal before the deadline to be considered.

POSTED

about 13 hours ago

DEADLINE

Manufacture of Government Identification Plate (Metal Stamping & Engraving)The contract requires the manufacture of 63 military-specification identification plates through metal stamping and engraving processes, fully compliant with Department of Defense technical standards RQ011, RC001, and RP001. These plates must meet stringent durability and legibility requirements inherent to military use, with production expected to adhere to all government-approved specifications for material composition, finish, and inscription. The work is classified as a subcontract under NAICS code 332813, indicating specialized metal stamping and forging activity, and is issued by the Department of Defense under the Construction & Equipment MRO SVC I procurement category. Performance of this contract must occur at Hill AFB, Utah, with a response deadline of August 3, 2026, and the solicitation was posted on July 22, 2026. All submissions must align with DLA’s procurement protocols and technical directives, ensuring exact replication of military ID plate formats, data layout, and environmental resilience. The contract is not set aside for any specific business size or category, and while no point of contact is listed, the official portal for inquiries and submissions is accessible via the provided DIBBS link. Final delivery must satisfy all quality control benchmarks to ensure full operational compliance in field environments.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 13 hours ago

DEADLINE

Packaging, Marking, and Preservation ServicesThe contract requires comprehensive military-compliant packaging, preservation, and marking of valve shipments in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards. All work must ensure that valves are properly protected against environmental damage, clearly labeled with required military data, and packaged to meet the rigorous durability and traceability demands of defense logistics. The services are intended for shipment to a designated performance location in Albany, Georgia, with the specific zip code 31704-1128. This is a subcontract under the NAICS code 493190 for Other Support Activities for Transportation, issued by the Department of Defense through the Construction & Equipment MRO SVC I organization. Bidders must submit responses by the deadline of August 3, 2026, with the opportunity to participate through the DIBBS system using the provided link. Compliance with all federal military packaging directives is mandatory, and failure to meet these specifications will result in rejection of the submission.

Other Warehousing and Storage

POSTED

about 13 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires pre-award preparation and submission of hazard warning labels and Material Safety Data Sheets for hazardous materials used in valve components or their packaging, ensuring full regulatory compliance prior to award. All documentation must be accurately developed to meet federal and international standards for hazard communication, covering chemical composition, physical and health hazards, safe handling procedures, and emergency response measures. The work is tied to a subcontract under the NAICS code 541620, associated with the Department of Defense’s Construction & Equipment MRO SVC I program, and performance is expected to be delivered to the location in Albany, Georgia, with a zip code of 31704-1128. The solicitation was posted on July 22, 2026, with a firm response deadline of August 3, 2026, indicating a narrow window for qualified vendors to submit proposals. No set-aside designation or organization type is specified, meaning the opportunity is open to all eligible subcontractors. The technical requirements center on precise labeling and MSDS documentation that align with current OSHA, DOT, and GHS guidelines, with potential implications for procurement continuity and supply chain safety. Submissions must demonstrate proven experience in hazardous materials compliance for defense-related valve systems, and failure to meet specifications could result in disqualification or non-compliance penalties.

Environmental Consulting Services

POSTED

about 13 hours ago

DEADLINE

Supply of Refrigeration Valves (CLIN 0002)The contract solicits the procurement and delivery of 35 refrigeration valves under a subcontract arrangement, with strict adherence to military packaging, marking, and destination inspection standards. The items are required to meet specifications aligned with Department of Defense requirements, ensuring readiness and compliance for military use. The place of performance is designated as Albany, Georgia, with the zip code 31704-1128, indicating where the delivered valves must be sent for acceptance and deployment. The North American Industry Classification System code 333414 identifies the industry as refrigeration and HVAC equipment manufacturing, confirming the technical scope of the supply. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, providing a twelve-day window for interested parties to submit proposals. The contract is managed under the Construction & Equipment MRO SVC I agency, reflecting its relevance to maintenance, repair, and operations support within the defense logistics structure.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of Check Valves (NSN: 4820001039185)The contract seeks the procurement and delivery of 13 check valves compliant with military specifications, identified by the National Stock Number 4820001039185, for use by the Department of Defense. All units must be properly packaged, clearly marked, and accompanied by complete hazardous materials documentation to meet stringent defense logistics standards. The requirement is issued under the NAICS code 332911 for other fabricated metal product manufacturing, and is classified as a subcontract opportunity with a response deadline of August 3, 2026. Performance is designated to occur at Albany, Georgia, with a posting date of July 22, 2026, indicating a five-week window for proposal submission. The contract is managed under the Construction & Equipment MRO Service I agency, and all submissions must be made through the DIBBS system linked in the official solicitation.

Industrial Valve Manufacturing

POSTED

about 13 hours ago

DEADLINE