This Government Contract opportunity from Department Of Defense was posted on July 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Self-Locking Hexagon Nuts (MS17829Z6C)

Closed

Federal

Submission Closed07/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332722

New

DIBBS

Precision Fastener Manufacturing – Flat WashersThe contract mandates the manufacture of 950 flat washers per delivery order in full compliance with NSN 5310-01-532-5236 specifications, requiring strict adherence to defined material composition, dimensional tolerances, and surface finish requirements. All production must meet the technical and quality standards established by the Defense Logistics Agency, ensuring every component is manufactured to military-grade precision and reliability. The scope is focused exclusively on producing these washers under a subcontract arrangement, with no flexibility in design or material substitution. This is a total small business set-aside under the Small Business Administration guidelines, specifically designated for businesses classified under NAICS code 332722, which covers screw, nut, and bolt manufacturing. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Performance is expected to align with DLA’s logistical and quality assurance frameworks, though the precise delivery location is unspecified. Bidders must be certified small businesses eligible under FAR 19.5 to qualify for award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A1-26-T-2497

The contract pertains to the procurement of 198 units of a screw thread insert identified by NSN 5325-00-786-6185 under solicitation SPE4A1-26-T-2497, with a delivery requirement of 80 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and apply in their revision state as of the solicitation issue or award date depending on acquisition size. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; attributes are categorized as critical, major, or minor and assigned verification levels or AQLs accordingly. Configuration changes require formal engineering change proposals, and requests for deviations or waivers must be submitted. Documentation for source approval is mandated under RC001, and export control restrictions apply due to the presence of technical data subject to ITAR or EAR, prohibiting unlicensed export or disclosure to foreign persons, including foreign nationals within the U.S. Only DLA contractors with approved JCP certification, completed training on handling export-controlled data, and approved access via the DLA questionnaire are permitted to handle such data under DFARS 252.225-7048. Physical identification and removal of government markings from non-accepted items are required per RQ011 and RQ017. The contract is administered by the Aviation Supply Chain under the Department of Defense with performance to occur at Robins AFB, Georgia, and inquiries are directed to Jade Stringfield at the provided contact information.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A0-26-T-4090

The contract pertains to the procurement of flat washers identified by NSN 5310015726401 and part number 17095125, with a unit of issue of package (PG), where one package contains 125 units. The requirement is for a single package to be delivered within five days FOB origin, with no tolerance for quantity variance. Delivery is to be made to Fort Stewart, Georgia, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for marking and labeling. Palletization must follow DLA packaging requirements, and shipment must be executed via traceable freight methods—parcel post is prohibited. The item is subject to stringent quality control provisions, requiring sampling in accordance with MIL-STD-1916 or ASQ H1331, with zero nonconformances permitted unless otherwise specified. Critical attributes are assigned verification levels or AQLs, and unspecified attributes are treated as major. The washer is also subject to requirements regarding physical identification, removal of government identification from non-accepted supplies, and potential handling of covered defense information. Technical and quality standards referenced are governed by the DLA Master List, with revisions effective as of the solicitation or award date depending on acquisition size. The supplier must comply with all marking, documentation, and shipment directives, including the use of the provided military shipping address and the assigned contract line item number. The original required delivery date is July 24, 2026, and the solicitation was issued under contract SPE4A0-26-T-4090.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-889P

The contract solicitation SPE7L1-26-T-889P is for the procurement of four units of a LEVER, LOCK-RELEASE (NSN 5340-01-558-2782, P/N 157D3900) at a unit price of $4.00, for a total contract value of $16.00. Delivery is required within five days of contract award, with FOB Origin terms placing all transportation costs and risks on the contractor until the item is placed at the origin. The delivery destination is a military logistics facility at AEROPUERTO EL DORADO in Bogotá, Colombia, with specific parcel post and freight shipping instructions provided. Packaging must strictly comply with MIL-STD-2073-1E for preservation and packing, with preservation method 10 (Clng/Dry) and unit container D3; marking and labeling must follow MIL-STD-129, including barcoding and no special markings, and palletization must adhere to DLA Packaging Requirements (RP001). Mercury or mercury-containing compounds are prohibited unless functionally essential in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, and portable mercury-containing items must be shock-proof with secondary containment per NAVSEA 5100-003D. The contract mandates compliance with CMMC Level 2 cybersecurity requirements and incorporates the full suite of DFARS and FAR security and information protection clauses, including 252.204-7012 for safeguarding covered defense information and cyber incident reporting, 252.204-7018 prohibiting covered telecommunications equipment, and 252.240-7997 requiring NIST SP 800-171 assessments. Inspection and acceptance occur at origin under FAR 52.246-2. Invoicing is exclusively through Wide Area WorkFlow (WAWF), and the contractor must maintain active SAM registration and comply with all deviation-applied clauses including combating trafficking, employment eligibility verification, sustainable products, and prohibition on internal confidentiality agreements. The solicitation closes on August 10, 2026, and must be submitted electronically via DIBBS. Offerors are required to provide their Unique Entity ID and CAGE code, and must represent their small business status and socioeconomic certifications

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-10FF

The contract specifies the procurement of a retaining ring with part number MS16624-1025 and NSN 5325-00-720-8064, requiring 589 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. The item is classified as a commercial item and is subject to stringent quality and technical requirements incorporated via the DLA Master List of Technical and Quality Requirements. Inspection and acceptance must occur at origin, with zero non-conformances required in sampling per MIL-STD-1916 or comparable zero-based plans, and attributes are assigned verification levels or AQLs as specified. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special markings permitted, and all packaging, preservation, and marking must be free of mercury or mercury compounds. The product is designated as a critical application item, manufactured to meet MIL-DTL-21248F and MS16624E standards, and any mercury-containing components in associated instruments or lamps must be shockproof with secondary containment as per NAVSEA guidelines. The delivery is directed to DLA Distribution Warner Robbins in Georgia, with transportation governed by DLAD procedural notes, and the contract award is linked to solicitation SPE4A6-26-T-10FF issued by the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4AX-26-T-0109

The contract pertains to the procurement of 200 shouldered studs with NSN 5307-00-111-3939 under solicitation SPE4AX-26-T-0109, with a delivery deadline of 261 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. The item is subject to Cybersecurity Maturity Model Certification Level 2 requirements, requiring third-party assessments by certified organizations, and physical identification of the bare item must adhere to specified marking protocols. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and covered defense information is subject to strict handling protocols under RD002. Technical data associated with this item is controlled under ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons, including foreign national employees, and access is restricted to contractors with approved JCP certification, completion of DOD export control training, and DLA authorization. The place of performance is Jacksonville, FL 32212-0103, and inquiries should be directed to Keith Allgeier at DLA.

SMSG AVIATION SUP CH CORPORATE LTC

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-10FW

The contract specifies the procurement of three machine screws identified by NSN 5305-01-586-7029, with a delivery requirement within 20 days after order placement. The item must comply with a recognized military or consensus non-government part standard, and only hardware manufactured to the current revision of that standard is acceptable for orders placed after the solicitation date, although previously manufactured items meeting prior valid revisions are still acceptable. All supplies must conform to DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, which governs all verification and inspection criteria. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise stated. The solicitations are fully competitive and issued under a federal specification, with the procurement managed by the ASC Commodities Division of the Department of Defense. The solicitation number is SPE4A6-26-T-10FW, with a response deadline of August 6, 2026, and the place of performance is Edwards AFB, CA, 93524-8600. Primary point of contact is Ashley JONES-TURNER, reachable via email and phone provided in the contract data.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-158P

This contract is for the procurement of 37 plain hexagonal nuts identified by NSN 5310-01-632-5880 and part number N88364 from Leslie Controls Inc., with delivery required within 161 days under the solicitation SPE7MC-26-T-158P. The item is classified as a restricted source requiring government engineering source approval, and technical and quality requirements are mandated by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition type and amendment dates. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking unless explicitly exempted for functional uses such as batteries, fluorescent lights, sensors, weapon systems, or specified reagents, with portable devices containing mercury needing shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including preservation methods, wrap materials, and unit container standards, while marking adheres to MIL-STD-129 with no special marking required. Delivery is FOB origin, inspection and acceptance occur at destination, and no quantity variance is permitted. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and the contract mandates adherence to DLA transport procedures. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, under NAICS code 332722, and the point of contact is Nicole Betts at the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7L5-26-T-4656

The contract pertains to the procurement of 16 units of an insert with screw thread, identified by NSN 5325-01-614-5590 and part number 14001411, supplied by SOS-FAIRBANKS MORSE. The item is governed by technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with specific provisions including packaging standards, removal of government identification from non-accepted supplies, and physical identification or bare item marking. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance requires zero non-conformances in the sample lot unless otherwise stated, and manufacturers may choose attribute or variable inspection under MIL-STD-1916. The solicitation number is SPE7L5-26-T-4656, posted on July 29, 2026, with a response deadline of August 6, 2026. The contracting agency is the Department of Defense through Land Supplier Operations Engines, with performance located in San Diego, California, 92136-5299. Delivery is required within five days of award, and the primary point of contact is Christopher Walker, reachable via email and phone provided.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Solicitation # SPE4A7-26-Q-0923

The contract pertains to a Parts Kit, Fastener with NSN 1560-01-699-3342, for a quantity of 20 units under solicitation SPE4A7-26-Q-0923, with a delivery deadline of 250 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date controlling based on acquisition size. The item is subject to cybersecurity compliance under CMMC Level 2, with the contractor required to be a certified third-party assessment organization. Physical identification and bare item marking standards are mandated, though unique item identification is not required per the service customer’s directive and DFARS 252.211-7003(c)(1)(i). Packaging must comply with DLA procurement standards, and inspection and acceptance occur at origin. Government identification must be removed from any non-accepted supplies. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S. subsidiaries and foreign nationals. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The Defense Logistics Agency limits distribution to ensure compliance with DFARS 252.225-7048. The contract was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Latrice Brown as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A1-26-T-2496

The contract is for the procurement of 362 flat washers identified by NSN 5310-00-543-4804 and part number CVC754-548D17, supplied by Triumph Aerospace Structures, LLC. The item is classified as a critical application product, and no approved technical data package is currently available, rendering the specification proprietary or insufficient for competitive sourcing. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the controlling revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence by DLA requirements, and palletization must follow RP001 guidelines. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, instruments, or weapon systems, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling for quality assurance must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in sampled lots unless otherwise directed. The certificate of conformance is authorized unless suspended by a quality assurance letter. Delivery is FOB origin with a 146-day lead time, inspection and acceptance occur at destination, and the quantity variance is strictly zero percent. Packaging and labeling must reflect the specified unit of issue and quantity per unit pack, with all shipments directed to DLA Distribution Depot Hill in Hill AFB, Utah, under DLA transportation protocols. The original required delivery date is August 11, 2019, with a needed ship date of July 12, 2019.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-10GA

The contract pertains to the supply of 167 machine bolts identified by NSN 5306-01-096-5593 under solicitation SPE4A6-26-T-10GA, a HUBZone set-aside issued by the Department of Defense’s ASC Commodities Division. Delivery is due in 559 days from award, and the contractor is required to perform first article testing on one unit of the item, submitting a formal test report within 60 calendar days of contract execution. The contractor must provide written notice at least 14 days before shipping the tested unit for government final acceptance testing and ensure all documentation—including test results, material certifications, and manufacturing drawings—is included with the submission. The government has 60 days after receiving the report to approve, conditionally approve, or disapprove the first article. Production lot testing follows first article approval, requiring the contractor to deliver one randomly selected sample from the production lot to the Redstone Technical Test Center under strict labeling and documentation requirements, including signed forms, traceable shipping records, and a prepaid return label. The contractor must also account for and price the cost of samples consumed during government testing. The contract prohibits Fast Pay terms and mandates that all testing, inspection, and documentation comply with FAR 52.209-3 and its alternate clause, as well as specific procurement notes referencing supplemental first article and production lot testing protocols. Shipment of production samples must be clearly marked, accompanied by full technical and quality assurance records, and delivered to the designated government testing facility. The contractor is responsible for asserting proprietary rights on documentation and ensuring all material and process certifications are current and accurate. The solicitation requires disclosure of the current dealer or distributor and their certification status, emphasizing compliance with equivalent standards. The point of contact for inquiries is Tyler Greene, and the contract is subject to government oversight through the Quality Assurance Representative. All activities must align with the technical data package and applicable military standards including MIL STD 129 for labeling.

ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

The contract requires the manufacture and supply of 1,000 self-locking hexagon nuts designated as part number MS17829Z6C, fully compliant with the NASM17829 and MIL-DTL-32258 technical specifications. Each unit must be accompanied by full material certification to verify compliance with material composition and mechanical requirements, ensuring reliability and performance in demanding applications. The nuts must be packaged in accordance with MIL-STD-2073-1E standards, which dictate protective handling and preservation methods suitable for military logistics, and labeled with MIL-STD-129 compliant marking to ensure traceability and proper identification throughout the supply chain. The production and delivery are to be performed under a subcontract arrangement for the NUCLEAR REACTOR PROGRAM under the Department of Defense, with the place of performance centered at NEW CUMBERLAND, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 17, 2026, and responses are due by July 22, 2026, with the NAICS code 332722 indicating the industrial classification for forged or stamped metal product manufacturing.

General Info

Manufacture and supply 1,000 MS17829Z6C nuts per military specs for DoD nuclear program in New Cumberland, PA.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 17

subcontract

Response DeadlineJul 22

Deadline has passed

Submission Closed

07/22/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → NUCLEAR REACTOR PROGRAM

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture and supply of 1,000 self-locking hexagon nuts (P/N MS17829Z6C) to NASM17829 and MIL-DTL-32258 specifications, including material certification, MIL-STD-2073-1E packaging, and MIL-STD-129 marking.