Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Supply of Self-Locking Wing Nuts (NSN: 5310005967155)

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of four self-locking wing nuts identified by NSN 5310005967155, a commercial off-the-shelf fastener designed for high-vibration environments in defense and industrial systems. These components are critical for securing assemblies where reliability and resistance to loosening under dynamic loads are essential. The requirement is posted under the NAICS code 332722, indicating it falls within the manufacturing sector for screw, nut, and bolt manufacturing, and is structured as a subcontract opportunity with no set-aside designation. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, providing a window of eight days for potential vendors to submit proposals. Performance of the contract is specified to occur at Fort Irwin, California, with a ZIP code of 92310-9986, indicating the delivery point aligns with a major military training and logistics hub. The contracting organization is the ASC Commodities Division under the Department of Defense, and the procurement is accessible through the DIBBS system via the provided link, ensuring transparency and standardization in the bid process.

General Info

Supply four self-locking wing nuts to Fort Irwin, CA, for DoD use, due August 13, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

FORT IRWIN, CA, 92310-9986, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of 4 self-locking wing nuts conforming to NSN 5310005967155, a commercial off-the-shelf fastener used in vibration-resistant defense and industrial applications.

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Supply of Plain, Extended Nuts (NSN: 5310016536069)The contract seeks the manufacture and supply of exactly 100 precision-machined plain extended nuts identified by part number 4195851 and national stock number 5310016536069, intended to comply with defense logistics standards for military applications. The work must be completed and delivered within a strict 111-day timeframe from contract award, emphasizing the urgency and critical nature of the component in supporting defense operations. The specification requires exacting tolerances and quality controls consistent with military-grade hardware, demanding suppliers to have proven experience in defense contracting and machining capabilities. The solicitation is classified as a subcontract under NAICS code 332722, which pertains to screw, nut, and bolt manufacturing, and is managed by the Land Supplier Operations Engines division of the Department of Defense. Performance is required at the location in Albany, Georgia, with the zip code 31704-1128 designated as the official place of delivery. The response deadline for submissions is August 17, 2026, and the solicitation was posted on August 5, 2026, giving potential vendors approximately twelve days to prepare and submit proposals. All participants must ensure compliance with applicable defense regulations and deliverables, with the contract likely serving as a direct supply link for critical assembly components in military equipment systems.
LAND SUPPLIER OPNS ENGINES

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-R-XB62
The contract is for the procurement of 300 plain hexagon nuts, identified by NSN 5310-01-368-5549, under solicitation SPE4A6-26-R-XB62, with a firm fixed price and no tolerance for quantity variation. Delivery is required within 240 days after award, with inspection and acceptance occurring at the contractor’s origin facility. The item is classified as a Critical Safety Item and a Critical Application Item, necessitating strict adherence to quality, traceability, and documentation requirements. All suppliers must comply with SAE AS9100 higher-level quality standards, MIL-STD-1916 or equivalent zero-based sampling plans, and strict physical identification mandates per RQ017, including bare item marking with lot and serial numbers, contractor and manufacturer CAGE codes, and part number. Packaging must follow MIL-STD-2073-1E with preservation method 33, and marking of all unit packs must conform to MIL-STD-129, including 2D barcoding, and palletization must meet DLA’s RP001 requirements. No special marking is required beyond these standards. The contract includes a comprehensive set of FAR and DFARS clauses governing changes, subcontracting, labor practices, trafficking, termination, counterfeit part avoidance, electronic parts sourcing, transportation, and cybersecurity, with multiple deviations authorized under deviation 2026-00038. All waivers or deviations must be reviewed and approved by the DSC Contracting Officer. Pricing is not specified, but the total contract value is capped at $350,000 across the five-year indefinite delivery period. Payment is mandatory via WAWF, and offers must be submitted through DIBBS or by email, fax, or hard copy to the designated DLA point of contact by August 14, 2026. The award is based on a trade-off evaluation where past performance, particularly quality and delivery history captured through PPIRS-SR, is significantly more important than cost or other non-price factors. Offerors must be registered in SAM with valid UEI and CAGE codes, and while socioeconomic status is solicited, no affirmative responses are required to be completed within the solicitation itself. All technical and quality requirements are governed by the DLA Master List, and the contractor is responsible for ensuring full compliance from production through delivery, including flow-down of requirements to subcontractors
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
COLLAR, PIN-RIVET
Solicitation # SPE4A6-26-T-12TU
The contract pertains to the procurement of 822 units of COLLAR, PIN-RIVET with NSN 5320-01-596-1012 and part number HL379-6, sourced from approved manufacturers including HOWMET GLOBAL FASTENING SYSTEMS INC and HI-SHEAR CORPORATION. Delivery is required FOB origin within 121 days, with no variance allowed in quantity, and inspection and acceptance must occur at the manufacturing origin in compliance with stringent quality standards. All items must adhere to MIL-STD-2073-1E packaging requirements and MIL-STD-129 marking standards, with no special marking codes applied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated. Critical threads must be gaged per SAE AS8879 Category 1 or MIL-S-7742, excluding self-locking nuts and small-diameter threads. Documentation for source approval is mandated, and all supplies must meet tailored higher-level quality requirements. Item Unique Identification is not required per Service customer direction. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics follow DLA procedural notes C19 and C20. The contract was solicited under SPE4A6-26-T-12TU with a response deadline of August 13, 2026, and a required ship date of December 13, 2026.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A6-26-T-12TP
The contract specifies the procurement of 65 socket head cap screws identified by NSN 5305-01-660-8339 and part number NAS1352-8-LN-28, manufactured to the current revision of the non-government standard NAS1352 Revision 13 dated 05/31/2016. All hardware must comply with this standard, and previously approved revisions are acceptable only for items manufactured before the solicitation date. The item is classified as a critical application component, requiring strict adherence to physical identification and bare item marking requirements under RQ017, and must be marked in accordance with MIL-STD-129 without special marking codes. Packaging must conform to MIL-STD-2073-1E, including preservation method 33, dry conditions, and use of BV unit containers, with palletization following DLA's packaging requirements. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking except for specific exemptions like batteries or instruments as defined by NAVSEA, and any such exempt items must include a secondary containment. Sampling for quality verification follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required unless otherwise stated. The item is delivered FOB origin with a 109-day delivery window, inspection and acceptance occurring at destination, and no variance is permitted in quantity. Delivery is directed to DLA Distribution at the New Cumberland, Pennsylvania facility.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A6-26-T-12TT
The contract solicitation SPE4A6-26-T-12TT calls for the procurement of 276 units of a BOLT, SHEAR designated as part number NAS1304-27, manufactured in accordance with the non-government standard NAS1303 through NAS1320 Revision 13 dated January 31, 2001, and referenced to drawing 13873 EI-013653161 Revision dated July 10, 2026. The item is classified as a critical application with no shelf life requirement. All hardware must conform to the current revision of the applicable part standard, and previously manufactured items under prior revisions are acceptable only if they were produced during the time those revisions were current. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards where conflicts exist. Thread inspection for Class 3A and 3B threads must follow System 22 of FED-STD-H28/20, excluding self-locking nuts and threads smaller than .190 inch internal or .138 inch external diameter. Item identification markings must comply with paragraph 4.1.b(2) of MIL-STD-130N, including manufacturer’s logo, lot number, and material identification, but Item Unique Identification (IUID) is waived under DFARS 252.211-7003(c)(1)(i). Packaging must adhere to ASTM D3951 unless overridden by DLA requirements, with palletization following RP001 and labeling per MIL-STD-129. All shipments are to be delivered FOB Origin to DLA Distribution Depot Oklahoma at Tinker AFB, with inspection and acceptance also occurring at origin. Solicitation requires adherence to MIL-STD-1916 or ASQ H1331 Table 1 for sampling, with zero non-conformances mandated unless otherwise specified; unspecified attributes are considered major with an AQL of 1.0. A First Article Test (FAT) is required for one unit, priced at $1.00, but no award will be made if the requirement is waived. The contractor must implement a quality system compliant with SAE AS9003 or ISO 9001 tailored to AS9003 and issue a Certificate of Conformance per FAR 52.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency