Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Silicone Compound (NSN 6850015676182)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the procurement and delivery of four units of a commercial off-the-shelf silicone compound identified by part number 40463 and national stock number 6850015676182, requiring full Department of Defense traceability and adherence to all logistics marking standards. The supplier must ensure each unit is properly labeled and documented to meet military logistics protocols, with no deviations permitted in compliance or documentation. The item falls under NAICS code 325998, indicating it is classified under other chemical product and preparation manufacturing, and is being procured under a subcontract arrangement by the Defense Logistics Agency on behalf of the Department of Defense. The contract was posted on July 17, 2026, and the place of performance and specific delivery location remain unspecified, though all units must be delivered in alignment with DoD supply chain requirements. The contract reference is tied to the DIBBS award system under contract SPE4AX16D9008 and delivery order SPE4A626FCUVA.

General Info

Procure four silicone units with DoD traceability, marked per military standards, under DLA subcontract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

325998 - All Other Miscellaneous Chemical Product and Preparation ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of 4 units of commercial off-the-shelf silicone compound (P/N 40463, NSN 6850015676182) with full DoD traceability and compliance to logistics marking requirements.

Similar Contracts

Same NAICS industry code

SPILL CONTAINMENT UNITThe contract is for the procurement of eight units of a Type 2 Spill Containment Kit designed for hazardous materials, identified by NSN 4235-01-419-4798 and part number AA60018-1-16-10-12-XR5-QB, manufactured in accordance with CID A-A-60018A Revision A dated May 13, 2021. The kit must comply with all referenced DLA technical and quality requirements, including packaging standards MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances accepted unless otherwise stated, and attributes are assigned verification levels or AQLs as defined. All items are subject to inspection and acceptance at origin, with no variance permitted in quantity—exact delivery of eight units is mandatory. Delivery is FOB origin with a required shipment date of January 10, 2027, and an original delivery deadline of November 24, 2026, allowing a 166-day performance period. Packaging must conform to DLA’s procurement requirements, including palletization and use of approved cushioning and preservation methods. The unit of issue is each (EA), and the total contract value is based on unit pricing for the eight units. The destination for delivery is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation logistics follow DLA Procurement Notes C19 and C20. The solicitation number is SPE4A7-26-T-581G, issued by the Department of Defense under NAICS code 325998, with primary point of contact Mykhara Robinson for contractual matters.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

FLUX, SOLDERINGThe contract pertains to the procurement of flux for soldering, identified by NSN 3439-00-250-2629, with a unit of issue of one BT equivalent to four ounces. The product is classified as a corrosive material under DOT regulations, with the shipping name specified as hydrochloric acid mixture; manufacturers must ensure proper classification if their product differs. All items must comply with MIL-STD-130N for identification marking of U.S. military property. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be verified at designated levels or AQLs. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on the acquisition size. The product is procured under a fully competitive process in accordance with military specifications. Delivery is required within 20 days after order, and the solicitation issued by the Defense Logistics Agency under contract number SPE8E6-26-T-3744 has a response deadline of July 30, 2026, with performance to occur in Minneapolis, Minnesota. The primary point of contact is Brett Scull, reachable via email and phone provided.

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

Supply and Delivery of Extreme Pressure Ordnance GreaseThe contract requires the procurement and delivery of 33 units of GREASE, ORDNANCE, EXTREME PRESSURE (NSN: 9150014702309) to Joint Base Lewis-McChord in Washington State, with strict adherence to Defense Logistics Agency packaging, marking, and invoicing standards. All deliveries must meet FOB destination requirements, ensuring the supplier assumes responsibility until the goods reach the specified delivery point. The item is classified under NAICS code 325998 and is issued as a subcontract under the Department of Defense, managed by the Defense Logistics Agency. The contract was posted on July 18, 2026, and the performance location remains unspecified beyond the final delivery destination. Compliance with all DLA directives regarding documentation, labeling, and shipment conditions is mandatory to satisfy contractual obligations.

Defense Logistics Agency

POSTED

DEADLINE

Diesel Fuel Additive SupplyThe contract requires the supply of two boxes of diesel fuel additive identified by NSN 6850015716236 and manufacturer part number 3064-06, to be delivered to Sweihan Air Base in the United Arab Emirates. The product must fully comply with applicable military specifications and be prioritized under the Defense Priorities and Allocations System to ensure timely fulfillment. The award is classified as a subcontract under the NAICS code 325998, and the contracting authority is the Defense Logistics Agency operating under the Department of Defense. Delivery must meet all military logistics and quality standards, with no flexibility in product specifications or sourcing. The contract was posted on July 18, 2026, and while no solicitation number is listed, the procurement is tracked through the DIBBS system under the referenced award and delivery identifiers.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Inspection Penetrant Remover (NSN 6850001608481)The contract involves the procurement and delivery of ten units of military-specification Inspection Penetrant Remover identified by NSN 6850001608481, destined for Fort Drum, New York, with delivery terms set at FOB destination. The supplier must ensure full compliance with all military packaging and labeling standards, including traceable shipping documentation to guarantee accountability and quality control throughout the logistics chain. The item falls under NAICS code 325998, indicating specialized chemical manufacturing, and is being procured under a subcontract by the Defense Logistics Agency on behalf of the Department of Defense. The contract was posted on July 18, 2026, and although solicitation details are not provided, the transaction is linked to a specific award record through the DIBBS system, ensuring transparency and traceability in the acquisition process.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Hydraulic Fluid (Automatic Transmission)The contract entails the procurement and delivery of five containers of hydraulic fluid compliant with National Stock Number standards for use in automatic transmission systems. This subcontract is issued under the auspices of the Defense Logistics Agency, a component of the Department of Defense, and falls under the NAICS code 325998 for other chemical product and preparation manufacturing. The fluid must meet stringent military specifications to ensure reliable performance in defense-related equipment. Delivery is expected to fulfill operational readiness requirements, though specific delivery timelines and locations are not detailed in the provided data. The contract was posted on July 18, 2026, and is accessible through the DIBBS portal, indicating it is part of the Department of Defense’s standardized procurement framework for logistical support items.

Defense Logistics Agency

POSTED

DEADLINE

Lubricant Supply and Delivery for DLA AviationThe contract involves the supply and delivery of 12 transport units of lubricant identified by NSN 9150012327667 to FOB Jersey City, NJ, ensuring full compliance with federal specifications and mandatory packaging standards. All items must meet stringent quality and safety requirements as dictated by government regulations, and no delivery will be considered complete without formal inspection and official acceptance by the government. The work is classified as a subcontract under the Defense Logistics Agency, part of the Department of Defense, and is aligned with NAICS code 325998, which pertains to other chemical product and preparation manufacturing. The contract was posted on July 18, 2026, and pertains to aviation logistics support, indicating the lubricant is intended for military aircraft or related maintenance operations. Delivery must be coordinated to meet scheduled timelines and location requirements, with final acceptance contingent upon successful government inspection prior to payment or closure of the contract.

Defense Logistics Agency

POSTED

DEADLINE

Silicone Compound Supply and DeliveryThe contract involves the supply and delivery of 40,000 trade units of a military-grade silicone compound identified by NSN 6850009279461, with a mandatory delivery deadline of September 16, 2026, to Jersey City, New Jersey. Delivery is structured under FOB Origin terms, meaning the supplier assumes responsibility for the goods until they are loaded onto the carrier at the point of origin, after which the risk and cost transfer to the recipient. The compound must be packaged and labeled in full compliance with Defense Logistics Agency standards to ensure compatibility with military logistics and inventory systems. The agreement falls under the NAICS code 325998 for other chemical product and preparation manufacturing and is classified as a subcontract within the Department of Defense procurement framework. The contract is administered by the Defense Logistics Agency and is accessible via the DIBBS system under the referenced award and delivery identifiers.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Ball and Roller Bearing GreaseThe contract entails the manufacture or supply of 5,000 tubs of ball and roller bearing grease compliant with NSN 915001491592 specifications, destined for delivery to a U.S. Navy vessel operating at a foreign port. The product must meet stringent military standards for performance and reliability, with full traceability required throughout the shipping process to ensure accountability and quality control from production to final delivery. The effort is classified as a subcontract under the Department of Defense, managed by the Defense Logistics Agency, and falls under NAICS code 325998 for other chemical product and preparation manufacturing. Although no specific solicitation number or point of contact is provided, the contract was posted on July 18, 2026, and the place of performance is tied to overseas naval operations, necessitating coordination with international logistics and compliance with U.S. defense procurement protocols.

Defense Logistics Agency

POSTED

DEADLINE

Chemical Thinner Supply for U.S. Navy VesselThe contract entails the supply and delivery of two gallons of military-grade Chemical Thinner, identified by NSN 6850002422089, to the USS STETHEM DDG 63 at FPO AP 96678. The delivery must be executed using the fastest available traceable shipping method to ensure timely and accountable transportation. The procurement is classified as a subcontract under the NAICS code 325998 and is administered by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 18, 2026, and the performance location is tied to the naval vessel’s operational address, though no specific regional office or point of contact is detailed. The contract references a specific award and delivery document identifier, indicating it is part of an existing logistics framework managed through the DLA’s procurement systems.

Defense Logistics Agency

POSTED

DEADLINE

Lubricating Oil Supply – GEA GradeThe contract calls for the supply of one drum of military-grade lubricating oil identified by NSN 9150010355394, meeting all Department of Defense packaging and marking standards to ensure compatibility with military logistics and handling protocols. Delivery is required at Fort Irwin, California, with the item classified under NAICS code 325998 for other chemical product and preparation manufacturing. The contract is structured as a subcontract under the Defense Logistics Agency, operating within the Department of Defense framework, and was posted on July 18, 2026. While specific award details, point of contact, and precise delivery location are not provided, the procurement is tied to a documented award reference linked through the DIBBS system, indicating formal contract administration and compliance tracking. All requirements emphasize adherence to federal military specifications without set-aside provisions or subcontractor type restrictions.

Defense Logistics Agency

POSTED

DEADLINE

Silicone Compound Supply (NSN 6850001775094)The contract involves the supply of 500 units of military-grade silicone compound identified by NSN 6850001775094, manufactured and delivered in full compliance with DFARS and FAR commercial item standards. The product is designated for Foreign Military Sales delivery to the Israeli Ministry of Defense, ensuring it meets stringent U.S. Department of Defense procurement and quality requirements. The transaction is structured as a subcontract under the Defense Logistics Agency, with the NAICS code 325998 indicating classification under other chemical product and preparation manufacturing. The solicitation was posted on July 18, 2026, and performance is tied to DLA’s logistics framework, though specific delivery locations and point of contact details are not provided. The contractual obligations align with U.S. defense supply chain protocols, emphasizing adherence to regulatory and technical specifications for international military partners.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

BATTERY, STORAGEThis contract specifies the procurement of four lead acid, dry charged, rechargeable batteries under NSN 6140-00-889-9777, with a unit price of $4.00 and a total contract value of $16.00. Delivery is required within five days of award, with shipment FOB origin and zero variance allowed in quantity. The batteries must comply with stringent packaging, marking, and shipping standards including MIL-STD-2073-1E and MIL-STD-129, with special marking code 32 indicating a non-extendable Type I shelf life of 60 months. The items must be packaged and palletized according to DLA packaging requirements and all hazardous material shipping protocols as defined by IP025. Mercury or mercury-containing compounds are strictly prohibited except in functional applications such as batteries, fluorescent lamps, and specified instruments, which must be shockproof and include a secondary containment as per NAVSEA guidelines. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise specified, and all attributes not explicitly defined are treated as major. Documentation including MSDS/PSDS, MIL-STD-130N labeling, and Federal Standard 313 compliance are mandatory. The end destination is DZ IKMAL MERKEZI KOMUTANLIGI in Derince, Izmit, Turkey, with freight handled by A.J. Worldwide Services Inc. The contract is issued by the Defense Logistics Agency under solicitation SPE7L7-26-T-4368 with a response deadline of July 30, 2026, and an original required delivery date of July 21, 2026.

Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

FLOODLIGHT, ELECTRICThe contract specifies the procurement of two electric floodlights with NSN 6220-01-723-0678 and part number 1403522 from J. W. Speaker Corporation, under solicitation SPE8E7-26-T-3364. Delivery is required within ten days of contract award, FOB origin, with no variance in quantity allowed, and inspection and acceptance occur at the destination. The items must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards like ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements. If classified as hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging consistent with ASTM D3951 is acceptable. Packaging units are defined as one unit per pack with a QUP of 001, and palletization must conform to DLA guidelines. The delivery address is W33RBS, Building 1509, Fort Stewart, GA 31314-5185, with shipment mandated to be sent by the fastest traceable means, excluding parcel post. The required delivery date is July 15, 2026, and the contract includes specific government tracking codes, project references, and point of contact information for Kelly Mitchell at the Defense Logistics Agency.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

SENSING ELEMENT, FIRThe contract specifies the procurement of five Sensing Elements, FIR, with NSN 6350375306236 and part number 90100040030-00A, supplied by CONSILIUM MARINE US INC and CONSILIUM MARINE & SAFETY AB. Each unit is priced at $5.00, with a total contract value of $25.00, and delivery is required within 20 days FOB destination, with no variance allowed in quantity. Inspection and acceptance occur at the destination point. Packaging must comply with DLA requirements, specifically RP001, and follow MIL-STD-129 for marking and labeling. If the item is non-hazardous, packaging must meet ASTM D3951 unless superseded by higher-priority DLA Master List Technical and Quality Requirements, which take precedence. Hazardous materials must adhere to TQ requirement IP025. All packaging must conform to specified Unit of Issue and Quantity per Unit Pack standards, and palletization must follow DLA guidelines. Shipments must be sent via the fastest traceable means, not parcel post, to the designated FPO address aboard the USS RICHARD M MCCOOL JR LPD 29, using RDD 777 and referencing the transportation notes C19 and C20. The required delivery date is July 15, 2026, with solicitation issued under SPE8E8-26-T-4753, and the contract is managed by the Defense Logistics Agency under NAICS code 335311.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 3 hours ago

DEADLINE

LADDER, FIRE, SINGLEThe contract pertains to the procurement of a single fire ladder with NSN 4210-01-127-7836 and part number 775A-14, sourced from DuO-Safety Ladder Corporation in Oshkosh, Wisconsin. One unit is required to be delivered within five days under FOB origin terms, with no variance allowed in quantity and inspection and acceptance occurring at the point of origin. Packaging must comply with MIL-STD-2073-1E, including specified methods for preservation, wrapping, and cushioning, and marking must adhere to MIL-STD-129 without special codes. The item is subject to DLA’s packaging and quality requirements referenced in the DLA Master List, and Covered Defense Information protocols apply. Delivery is directed to a Canadian military facility in Montreal, with both parcel post and freight shipping addresses provided. The contract is issued under solicitation SPE8E6-26-T-3751, with a required delivery date of July 23, 2026, and the supplier must meet all federal acquisition standards, including unit of issue alignment and hazardous materials handling where applicable.

POSTED

about 3 hours ago

DEADLINE

GAGE FEMALE TYPE NThe contract pertains to the procurement of a GAGE FEMALE TYPE N with NSN 5220-01-397-2521 and part number 85054-60050 from Keysight Technologies Inc, requiring one unit to be delivered within 20 days from the order date under FOB origin terms with no variance permitted in quantity. All packaging must comply strictly with ASTM D3951 and MIL-STD-129 for marking and labeling, and palletization must adhere to DLA Packaging Requirements for Procurement, with DLA Master List of Technical and Quality Requirements taking precedence over any general standards. Inspection and acceptance occur at the destination, and the item is designated as a critical application item with potential exposure to covered defense information. Shipping must be conducted via the fastest traceable means, explicitly prohibiting parcel post, with delivery directed to Det ELMACO, 4th Maint Bn, 4th CRR at Fort Benjamin Harrison in Indianapolis, IN. The contract references specific DLA procurement controls, including the DLA Master List revision effective on the solicitation issue date, and mandates compliance with all applicable technical and quality requirements identified by R or I numbers. The required delivery date is March 25, 2026, with the solicitation issued under SPE8E5-26-T-3631 and a response deadline of July 30, 2026, managed by the Defense Logistics Agency under NAICS code 334516, with Khue Nguyen as the primary point of contact.

Analytical Laboratory Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

FILTER, AIR DUCTThe contract is for the procurement of two air duct filters with NSN 4460016180197 and part number RITTAL 0102-.700, issued by the Defense Logistics Agency under solicitation SPE8E8-26-T-4754. The items must be delivered within 20 days to the USS Dwight D Eisenhower CVN 69 at FPO AE 09532, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 and MIL-STD-129, with all DLA Master List of Technical and Quality Requirements taking precedence. Palletization must adhere to DLA packaging requirements, and shipments must be sent via traceable means—parcel post is prohibited. The unit of issue is each, priced at $2.00 per unit for a total of $4.00. The Required Delivery Date is July 15, 2026, and the contract references applicable technical and quality standards via R and I numbers from the DLA Master List. All government-specific labeling, documentation, and shipping instructions including VSM for vendors, TCN V033696187CJ24, and DLAD Proc Notes C19 and C20 must be strictly followed.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

ADHESIVEThis contract pertains to the procurement of an adhesive product identified by NSN 8040-01-685-5306, with part number RTV157, supplied in 2.8-ounce tubes as a solid paste in gray/grey color. The item is classified as a Type I (Code H) with a non-extendable shelf life of 12 months, requiring storage between 60 and 80 degrees Fahrenheit. The supplier must comply with all DLA packaging standards under MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for Type I shelf-life items, and palletization per DLA requirements. Hazardous material regulations under OSHA’s revised Hazard Communication Standard are strictly enforced, mandating submission of Safety Data Sheets and compliant labeling per 29 C.F.R. 1910.1200 prior to award, along with employee training on these updated requirements. The product must be delivered FOB destination within five days of notification, with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. The shipment is destined for a U.S. NATO facility in Romania through vessel transport, with specific customs clearance instructions and transportation protocols governed by DLAD procedural notes C19 and C20. The contract is issued under solicitation SPE8ES-26-T-2386 for a total of twenty tactical units, with a required delivery date of July 21, 2026, and is subject to federal procurement regulations including the removal of government identification from non-accepted supplies and the incorporation of DLA’s master list of technical and quality requirements referenced by R and I numbers.

Adhesive Manufacturing

POSTED

about 3 hours ago

DEADLINE

VALVE, CHECKA check valve with a 1/4 inch male brass connection and a nominal opening pressure of 1/3 PSI is being procured under solicitation SPE7MC-26-T-140R, with a single unit quantity requiring delivery within 20 days FOB origin. The item is designated as a critical application and must conform to DLA packaging requirements and technical specifications referenced in the DLA Master List of Technical and Quality Requirements. The valve must be manufactured to the specified part number B-4C4-1/3 by Swagelok and is identified by NSN 4820011801756. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional exceptions like batteries, fluorescent lamps, sensors, or reagents as defined by NAVSEA; any such exceptions must include a secondary containment barrier and be shockproof per NAVSEA 5100-003D. Preservation and packaging must comply with MIL-V-3 and MIL-STD-2073-1E, using Level A preservation when ZZ is the specified method, and all marking must follow MIL-STD-129 with no special marking codes applied. The item must be shipped via traceable freight to Dyess Air Force Base, TX, and parcel post is strictly forbidden. Inspection and acceptance occur at the destination, with zero variance permitted in quantity, and the original required delivery date is July 15, 2026.

Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

FILTER, GASThe contract is for the procurement of 200 units of GAS FILTER, identified by NSN 4240013927048 and part number 020X from SUBMERSIBLE SYSTEMS, INC., under solicitation SPE8E6-26-T-3743. Delivery is required within five days of award, FOB origin, with no variance allowed in quantity. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, unit containers, and packing levels, with marking in accordance with MIL-STD-129 and palletization per DLA packaging requirements. The contract prohibits intentional addition of mercury or mercury-containing compounds to the supplies, except for functional uses in batteries, fluorescent lights, specified instruments, weapon systems, or chemical reagents authorized by NAVSEA, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. Packaging and shipping of hazardous materials must meet IP025 standards. The freight forwarder is A.J. Worldwide Services Inc. in Secaucus, NJ, with delivery destined to DZ IKMAL MERKEZI KOMUTANLIGI in Derince, Izmit, Turkey. The contract is a total small business set-aside under NAICS code 315990, with a response deadline of July 30, 2026, and an original required delivery date of July 21, 2026. Government-specific codes and identifiers are provided for logistics and tracking, including DIC A01, DIST F9B, and ADV 2L. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the procurement size.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 3 hours ago

DEADLINE

COATING COMPOUND, NOThe contract specifies the procurement of a non-slip coating compound designated as NSN 8010-01-550-6036, supplied by American Safety Technologies Inc under part number MS-400G LSA GRAY 36076-5GL, with a total quantity of four kits, each consisting of 18.9 liters (5 gallons) of gray coating compound conforming to Fed-Std-595 Color No. 36076. All packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with each kit contained in a single box sufficient to prevent damage or movement of components, or multiple labeled boxes if necessary, and must include an internal contents list. The product is classified as a Type 2 (Code 4) item with a twelve-month extendable shelf life, requiring special marking code 33. Hazardous material compliance is mandatory under OSHA’s revised Hazard Communication Standard, requiring submission of Safety Data Sheets and HCS-compliant labels prior to award, along with employee training on the updated labeling and documentation requirements. Delivery is FOB destination within 20 days of contract award, with no variance allowed in quantity. The delivery point is in Yokohama, Japan, and transportation must comply with DLAD Proc Note C19 and C20. The contract incorporates technical and quality requirements from the DLA Master List and mandates strict adherence to packaging, marking, and handling procedures for hazardous materials, including special handling codes and preservation methods. This solicitation, issued under SPE8ES-26-T-2390, targets a federal procurement through the Defense Logistics Agency with a response deadline of July 27, 2026, and a required delivery date of July 15, 2026.

Paint and Coating Manufacturing

POSTED

about 3 hours ago

DEADLINE

CONNECTORThe contract pertains to the procurement of a connector with NSN 5935-LN-003-5697 and part number 8011-00002, for a quantity of ten units, to be delivered within five days of award. The delivery is FOB destination, with inspection and acceptance occurring at the destination location, and no variance in quantity is permitted. Packaging must comply with ASTM D3951 and mandatory DLA packaging standards, including MIL-STD-129 for marking and labeling, with palletization adhering to RP001 requirements. Item Unique Identification is not required per the Service customer’s direction, and the item has no shelf life. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified in the contract. Critical, major, and minor attributes must be verified at Level VII, IV, and II respectively or with AQLs of 0.1, 1.0, and 4.0. All technical and quality requirements referenced by R or I numbers take precedence and are sourced from the DLA Master List. The item must be shipped by the fastest traceable means, not parcel post, to the specified government facility in Jacksonville, Florida. The required delivery date is July 21, 2026, with a solicitation issued under SPEFA3-26-T-0321 and response deadline July 27, 2026. Unit of issue is each, price is $10.00 per unit for a total of $100.00.

Other Support Activities for Air Transportation

POSTED

about 3 hours ago

DEADLINE

SHEET, NONMETALLIC, PROTThe contract pertains to the procurement of a nonmetallic protective sheet and related special-shaped sections, identified by NSN 9390015957239 and part number 6440389-01M1, with a shelf life of 18 months classified as Type I, non-extendable. Deliveries are to be made FOB origin within five days of contract award, with no quantity variance allowed, and inspection and acceptance occur at the destination point. Packaging must strictly adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking compliance to MIL-STD-129 and a mandated 10x10 inch MRAP sticker in fluorescent yellow with bold black lettering, placed visibly on palletized shipments destined for DDC depots or CCPs, though OEM-specific colors are authorized for designated contractors under Lean Six Sigma guidelines. Deviations in sticker dimensions are permitted if space constraints prevent full compliance, and no quality notifications are required if stickers are missing or OEMs run out of yellow stock. Hazardous material shipping rules and traceable freight methods are enforced, with no parcel post allowed, and shipments must be delivered to specified military installation addresses in Indiana and Washington state under unique identifiers and project codes. The contract is issued under solicitation SPE8E5-26-T-3624, administered by the Defense Logistics Agency, and is subject to overarching technical and quality requirements referenced from the DLA Master List, with all terms governed by the version in effect at the solicitation or award date.

All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 3 hours ago

DEADLINE