Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Supply of Single-Crystal CVD Diamond Substrates

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of high-purity, single-crystal chemical vapor deposition diamond substrates measuring 10 mm by 10 mm with a thickness of approximately 100 micrometers, specifically engineered for use in nanoscale grating fabrication. These substrates must exhibit exceptionally low defect density and optical flatness to meet the stringent requirements of advanced microfabrication applications, ensuring consistent performance in precision optical and electronic devices. The deliverables are critical to supporting research and development activities requiring material properties that only high-quality diamond can provide. The solicitation, issued by SLAC National Accelerator Laboratory under the U.S. Department of Energy, is classified as a subcontract and was posted on August 3, 2026, with a response deadline of August 13, 2026. The North American Industry Classification System code 325998 is associated with this procurement, indicating it falls under other chemical product and preparation manufacturing. The place of performance is designated as Menlo Park, California, with a zip code of 94025. This effort supports federal scientific infrastructure and requires strict adherence to technical specifications, though no set-aside provisions or point of contact details are specified in the provided data.

General Info

Supply of 10mm x 10mm x 100µm CVD diamond substrates for nanoscale grating fabrication at SLAC, Menlo Park.

Agency

Department Of Energy → Slac National Accel Labor -Doe ContractorView Agency

NAICS

325998 - All Other Miscellaneous Chemical Product and Preparation ManufacturingView NAICS

Place of Performance

Menlo Park, CA, 94025, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Energy → Slac National Accel Labor -Doe Contractor
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Energy → Slac National Accel Labor -Doe Contractor
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of high-purity, single-crystal CVD diamond substrates (10 mm x 10 mm, ~100 µm thick) suitable for nanoscale grating fabrication with low defect density and optical flatness.

Similar Contracts

Same NAICS industry code

NAICS: 325998
New
DIBBS
CLEANING SOLVENT, GE
Solicitation # SPE8E5-26-T-3637
The contract is for the procurement of Cleaning Solvent, GE, identified by NSN 7930-01-367-0994 and part number P28288-16OZB-P-1, under solicitation SPE8E5-26-T-3637 issued by the Defense Logistics Agency. Two line items are specified: 10 boxes at one delivery location and an additional one box to another, with a firm-fixed-price structure and zero variance allowed in quantity. Delivery is required within 20 days of award, FOB destination, with inspection and acceptance occurring at the delivery point. The item has a non-extendable 12-month shelf life and is classified as a TYPE I (CODE H) hazardous material, requiring strict compliance with IP025 for hazardous materials packaging, marking, and shipping. Packaging must conform to MIL-STD-2073-1E with a unit pack code U, and palletization must follow DLA’s RP001 requirements. Marking must adhere to MIL-STD-129 with special marking codes designated as ZZ, and barcoding must include Code 128 or Data Matrix. Shipping must avoid parcel post and use the fastest traceable means, with two designated delivery points: NAS OCEANA in Virginia Beach, VA, and Fort Bragg, NC, each with their own DoDAACs and contact information. The solvent is subject to preservation methods under HM CLNG/DRY conditions, and government identification must be removed from any non-accepted supplies per RQ011. The contract incorporates requirements from the DLA Master List of Technical and Quality Requirements via RA001 and mandates that all technical specifications are met as defined by referenced standards. The contract includes a comprehensive set of regulatory clauses governing cybersecurity, hazardous materials, labor, and acquisition practices. Key compliance mandates include safeguarding covered defense information per 252.204-7012, implementing NIST SP 800-171 controls under 252.240-7997, and prohibiting the use of covered telecommunications equipment from specified foreign entities under 252.204-7018. Contractors must comply with hazard communication standards, restrict hexavalent chromium use, and adhere to prohibitions against storing or disposing of toxic materials. The contract enforces electronic payment systems, requiring invoicing through WAWF
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 325998
New
DIBBS
WATER PURIFICATION TAB
Solicitation # SPE2DP-26-T-4448
The contract specifies the procurement of water purification tablets containing a stabilized form of chlorine dioxide, with no active chlorine or iodine, intended for inclusion in new first aid kits. Each unit consists of 10 individual sealed tablets packaged under the unit of issue “PG,” with a total requirement of 200 PG, equivalent to 2,000 tablets. The product must have a total shelf life of 60 months, and at least 51 months of shelf life must remain upon delivery to the government activity. The item is identified by NSN 6850-01-530-3396 and reference part number KATADYN NORTH AMERICA INC. OBJ61 P/N 8014821. Delivery is required within 84 days after order receipt, FOB destination, to either APO AP 96260-5479 for parcel post or CAMP CARROLL, WAEGWAN, 39886 KR for freight shipping. Inspection and acceptance occur at the destination, and the contract mandates strict compliance with packaging and preservation standards per MIL-STD-2073-1E and Special Packaging Instructions MPWNN00001, with medical acquisitions requiring commercial packaging. Marking must adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129, though compliance with MIL-STD-129 remains required for shipment and storage. Hazard communication requirements are governed by OSHA’s revised Hazard Communication Standard (29 CFR 1910.1200), mandating Safety Data Sheets and compliant labeling prior to award, with exceptions permitted only if the product falls under other federal statutes such as the Federal Insecticide, Fungicide and Rodenticide Act or the Federal Hazardous Substances Act. The supplier must train employees on these updated requirements and ensure all hazardous material packaging, labeling, and shipping aligns with supplemental instruction IP025. The solicitation, issued under DLA Master Solicitation Revision 105, incorporates numerous FAR and DFARS clauses addressing cybersecurity, whistleblower rights, export controls, substance prohibitions, electronic payment systems, and contractor representations. Offers must be submitted via DIBBS, and failure to provide required SDS documentation or the use of additive manufacturing renders an offer ineligible. The government may award automatically or use HUBZone price preferences, with all payments processed electronically through WAWF, and
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Energy → Slac National Accel Labor -Doe Contractor

Same awarding agency

NAICS: 334510
New
Federal
Fabrication of Linear Diamond Gratings on CVD Diamond SubstratesThe contract calls for the precision nanofabrication of custom linear diamond gratings on single-crystal chemical vapor deposition diamond substrates, adhering to exacting specifications for pitch, duty cycle, and grating depth as defined by SLAC CAD designs. The work requires advanced nanofabrication capabilities to achieve submicron accuracy and surface quality suitable for high-performance optical or particle beam applications, with all components produced to meet stringent dimensional tolerances and material integrity standards inherent to diamond substrates. The project demands expertise in etching, lithography, and metrology tailored to diamond’s extreme hardness and thermal properties. Performance is required at the Menlo Park location with a 94025 zip code, and the subcontract is issued under NAICS code 334510 for optical instrument and equipment manufacturing. The solicitation was posted on August 3, 2026, with a response deadline of August 13, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The contracting entity is SLAC National Accelerator Laboratory, operating under the Department of Energy, and the work supports specialized research infrastructure requiring materials with exceptional durability and optical stability. No set-aside provisions are specified, and the opportunity is open to any eligible subcontractor capable of meeting the technical demands.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 333310
New
Federal
Beam Sharing Grating, Linear Diamonds
Solicitation # 366855(AG)
SLAC National Accelerator Laboratory, operated by Stanford University for the U.S. Department of Energy, is seeking a U.S.-based supplier for two custom linear diamond gratings on single-crystal CVD diamond substrates, each featuring two gratings with distinct pitch and duty cycle specifications on a single 10 mm x 10 mm frame with a thickness of approximately 100 micrometers. The first grating has a 980 nm pitch with duty cycles of 30% and 40%, requiring a guaranteed depth of 3.5 micrometers, while the second has a 2000 nm pitch with the same duty cycles and a guaranteed depth of 5 micrometers; each grating measures approximately 2 mm by 1 mm, with grooves oriented parallel to the 1 mm edge and engraving aligned to SLAC-provided CAD designs. Optional enhanced depth variants are available for both substrates, subject to fabrication feasibility. The contract is awarded under the Lowest Price Technically Acceptable method, with technical compliance, pricing, and delivery evaluated per the attached Source Selection Plan. Only entities registered in the System for Award Management (SAM) are eligible, and proposals must include a Buy American Act Certificate, proper marking of proprietary information, and certification of compliance. Performance is governed by SLAC’s Terms and Conditions for Fixed Price Commercial Supplies and Services (August 2023) and its Supplemental Rider (August 2026), which establish warranty, indemnity, confidentiality, dispute resolution, and quality assurance obligations. Payment is net 30 days, with freight terms FOB Destination Prepaid and Add, and responses are due by August 13, 2026, to Angela Garcia at SLAC in Menlo Park, California.
Commercial and Service Industry Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 8 days
View Details