Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Skin Protective Underwrap

Active

Federal

Response Deadline07/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the procurement, packaging, labeling, and delivery of four units of Skin Protective Underwrap identified by NSN 6510-01-699-5521 to a military installation in Germany. All aspects of the supply must adhere to stringent regulatory and operational standards including OSHA guidelines, MMS NO. 1 specifications, and DLA shipping requirements to ensure safety, compliance, and seamless integration into military medical logistics. The work is classified as a subcontract under NAICS code 325199 and is being managed by the Medical Supply Chain MD Surg FSF under the Department of Defense. The solicitation was posted on July 23, 2026, with a firm deadline for responses on July 29, 2026, and the performance location is designated as Germany where the underwrap will be received and utilized for medical support operations.

General Info

Procure and deliver four NSN 6510-01-699-5521 skin underwrap units to Germany per military medical logistics standards.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

325199 - All Other Basic Organic Chemical ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 29

Submission deadline

Response Deadline

07/29/2026, 05:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement, packaging, labeling, and delivery of 4 units of Skin Protective Underwrap (NSN: 6510-01-699-5521) to a military installation in Germany, compliant with OSHA, MMS NO. 1, and DLA shipping standards.

Similar Contracts

Same NAICS industry code

Ozone-Depleting Substance Alternatives SupplyThe contract is for the supply of refrigerants, foams, solvents, and aerosols that meet the Environmental Protection Agency’s Significant New Alternatives Policy program as environmentally compliant alternatives to ozone-depleting substances. It is a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to compete, and it is classified under NAICS code 325199 for other chemical product and preparation manufacturing. The work is performance-based and must be delivered to El Paso with a zip code of 79903, indicating the physical location where the goods will be used or distributed. The solicitation was posted on July 24, 2026, with a firm response deadline of July 29, 2026, at 2:00 PM, and it is managed by the Mission Support Contracting Division within the Department of Homeland Security. All products must be fully compliant with EPA SNAP standards to ensure environmental safety and regulatory adherence.

Mission Support Contracting Division

POSTED

DEADLINE

Sodium Chlorite 31% Solution Supply – Livingston Plant DeliveryThe contract requires the supply of 40,000 pounds of sodium chlorite solution at a 31 percent concentration, to be delivered F.O.B. at the Livingston Plant. The product must strictly comply with NSF-61 and ANSI/NSF 60 standards, ensuring it meets stringent quality and safety requirements for use in water treatment applications. Delivery timing and compliance with these certifications are critical to fulfilling contractual obligations, as nonconforming material will be rejected. The solicitation is classified as a subcontract under NAICS code 325199, and is issued by the Trinity River Authority of Texas, with bids due by August 13, 2026, at 5:00 PM. The place of performance is specified as the Livingston Plant, though exact location details are not provided in the data, and no set-aside provisions are indicated for small businesses or other categories. Proposers must ensure full adherence to the technical specifications and delivery terms to be considered for award.

Trinity River Authority of Texas

POSTED

DEADLINE

Sodium Chlorite 31% Solution Supply – Huntsville Plant DeliveryThe contract calls for the supply of 400,000 pounds of sodium chlorite solution at 31% concentration, to be delivered F.O.B. at the Huntsville Plant with full compliance to NSF-61 and the Safe Drinking Water Act standards, ensuring the product meets stringent safety and quality requirements for potable water applications. The offering is structured as a subcontract under NAICS code 325199, indicating it involves other chemical manufacturing activities, and is procured by the Trinity River Authority of Texas as the contracting entity, with the bid response deadline set for August 13, 2026, at 5:00 p.m. The solicitation was posted on July 23, 2026, and all materials must be submitted through the provided online portal to be considered valid.

Trinity River Authority of Texas

POSTED

DEADLINE

Electrical Insulating Oil Supply and PackagingThe contract seeks the supply, packaging, labeling, and delivery of 15 containers of electrical insulating oil that meets hazardous material handling requirements and military packaging standards. The product must be prepared and shipped in full compliance with regulations governing dangerous goods to ensure safe transportation and storage, reflecting the stringent protocols expected by the Department of Defense. All work is to be performed in alignment with the NAICS code 325199, indicating the chemical manufacturing sector, and the delivery must reach the specified place of performance in Tracy, California, with a zip code of 95304-5000. The solicitation is structured as a subcontract opportunity under the Construction & Equipment MRO_svc I program, with a response deadline of August 3, 2026, and was posted on July 23, 2026. While no set-aside designation is specified, bidders must be prepared to demonstrate capability in handling hazardous materials, adhering to military packaging specifications, and delivering on tight logistical timelines. The contract does not list a point of contact, and interested parties are directed to the DIBBS portal for further details and submission requirements.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supplier of Raw Materials / Electronic ComponentsThe contract seeks suppliers to provide DFARS-compliant raw materials and sub-components critical to the manufacturing of connectors, including insulating compounds, metal contacts, and molding materials, all of which must meet strict defense acquisition regulations. The solicitation is issued under the NAICS code 325199 and is structured as a subcontract under the Department of Defense’s Active Devices Division, with performance required at the specified location in Tracy, California, 95304-5000. All materials must fully comply with DFARS requirements to ensure domestic sourcing and supply chain integrity for defense applications. The opportunity was posted on July 23, 2026, with a response deadline of August 3, 2026, indicating a tight timeline for potential vendors to submit their proposals. There is no set-aside designation specified, meaning the contract is open to all qualified suppliers regardless of business size or classification. The procurement is managed through the DIBBS platform, and interested parties must respond via the provided UI link to be considered. Compliance with material specifications, regulatory adherence, and timely delivery are essential for award consideration.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Element Assembly Oil (NSN: 2910012247438)The contract requires the supply of 74 units of Element Assembly Oil designated by NSN 2910012247438, specifically formulated to meet ASTM D3951 standards and federal military preservation and packaging specifications. This material is intended for use in defense-related applications and must comply with stringent quality and performance requirements to ensure proper function and longevity under operational conditions. The delivery must be completed at the specified place of performance in San Diego, California, with a zip code of 92136-3581, and the work falls under NAICS code 325199 for other chemical product and preparation manufacturing. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, indicating a limited window for qualified suppliers to submit proposals. The contract is classified as a subcontract and is issued by the Department of Defense through the Land Supplier Ops Engines division, which manages logistics and supply chain functions for military equipment. While no set-aside type is specified, the procurement is open to eligible contractors capable of meeting the technical and regulatory demands of military-grade oil. Interested parties must access the official DIBBS portal via the provided link to obtain full details and submit bids before the deadline.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Packaging and Marking Correction ServicesThe contract seeks corrective services to bring defense electronic components into compliance with military and federal packaging and marking standards. It addresses nonconforming packaging that does not meet required specifications, ensuring components are properly labeled, secured, and documented for use within defense systems. The work is critical to maintaining supply chain integrity and operational readiness, as improper packaging can lead to component damage, misidentification, or rejection during military logistics and deployment phases. Performance is required at Fort Wayne, Indiana, with a response deadline of July 31, 2026. The contract is classified as a subcontract under NAICS code 325199, which covers other chemical product and preparation manufacturing, indicating the technical and specialized nature of the corrections needed. It is issued by the Electrical Devices Division of the Department of Defense, emphasizing the high-stakes nature of the work involved. All corrections must be executed precisely to comply with stringent government standards, and the contractor must demonstrate expertise in military logistics, materials handling, and regulatory compliance.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Supply of Raw Materials and Components for Strain Relief AdapterThe contract involves the supply of compliant raw materials including thermoplastics and metal connectors essential for manufacturing military-grade cable strain relief adapters, ensuring compliance with defense-grade specifications for durability and performance. These materials must meet exacting standards for use in military applications, where reliability under extreme conditions is critical, and the contractor is expected to deliver materials that are fully traceable and documented to satisfy quality assurance protocols. The opportunity is structured as a subcontract under the Department of Defense through the MARITIME SUPPLY CHAIN, with NAICS code 325199 indicating it falls under other chemical product and preparation manufacturing. All proposals must be submitted by the deadline of August 6, 2026, and performance is expected to support defense systems where strain relief adapters are integral to secure and safe cable termination in harsh environments.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Acetate Insert SupplyThe contract calls for the supply of clear, archival-quality acetate inserts measuring 8.5 inches by 11 inches, specifically designed for use in PMC holders to safeguard certificates from damage and deterioration. These inserts must meet strict archival standards to ensure long-term preservation without degrading or reacting with the documents they protect. The solicitation is issued under a subcontract structure, with the National Cemetery Administration, operating under the Department of Veterans Affairs, as the contracting entity. The NAICS code 325199 indicates the nature of the work falls under miscellaneous chemical product manufacturing, suggesting the inserts are specialized industrial products requiring consistent quality control. The opportunity was posted on July 22, 2026, with responses required no later than 7:00 p.m. on July 30, 2026. No set-aside provisions are specified, meaning the contract is open to all qualified vendors regardless of business size or ownership classification. There is no designated place of performance or point of contact listed in the provided details, and the work is expected to support federal records preservation efforts within the National Cemetery Administration’s operations. Interested parties must submit proposals through the SAM.gov portal using the provided link, ensuring compliance with all technical and delivery requirements outlined in the solicitation documents.

National Cemetery Administration (36C786)

POSTED

DEADLINE

Supply of Engine Oils and LubricantsThe contract titled Supply of Engine Oils and Lubricants is issued by HARLINGEN CISD in Texas and seeks a subcontractor to supply bulk and packaged engine oils, gear lubes, and other lubricants for the school district’s fleet vehicles. The contractor is responsible for the full lifecycle of product delivery, including storage, order processing, fulfillment, and on-demand distribution to meet operational needs. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and is classified under NAICS code 325199, which corresponds to other chemical product and preparation manufacturing. The place of performance and office details are unspecified, but work must be carried out in alignment with the district’s fleet maintenance requirements in Texas. All deliveries must ensure timely, reliable access to high-quality lubricants to support the continuous operation of district vehicles.

POSTED

DEADLINE

Antifreeze Supply and DeliveryThe contract mandates the supply and delivery of two containers of military-grade antifreeze designated by NSN 6850014716534 to Yuma Proving Ground in Arizona, ensuring full compliance with Defense Federal Acquisition Regulation Supplement requirements for shipping and handling. All logistics must be traceable from origin to destination, with precise military labeling applied to meet stringent defense standards. The procurement falls under NAICS code 325199 and is administered by the Defense Logistics Agency under the Department of Defense, indicating strict adherence to federal military procurement protocols. Although the solicitation number and specific point of contact are not provided, the contract is structured as a subcontract with delivery obligations tied to verified military logistical channels and regulatory compliance.

Defense Logistics Agency

POSTED

DEADLINE

Antifreeze Supply and DeliveryThe contract involves the supply and traceable delivery of 6,000 containers of DFARS-compliant antifreeze identified by NSN 6850014649137 to Fort Stewart, Georgia. All units must be packaged, labeled, and documented in full compliance with Department of Defense standards to ensure proper handling, identification, and regulatory adherence throughout the supply chain. The delivery is part of a subcontract under the Defense Logistics Agency, with the North American Industry Classification System code 325199 indicating the nature of the manufacturing activity. The contract emphasizes strict traceability and compliance with federal acquisition regulations, particularly those governing domestic sourcing requirements under DFARS. Proper documentation is required to verify adherence to DoD packaging protocols and to support audit and inventory management procedures at the destination.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

ADMINISTRATION SET, INTThe contract specifies the procurement of a selectable drip intravenous administration set, identified by NSN 6515-01-652-5203, with a unit of issue being a package of 48 units. Each set includes three luer-activated Y-sites, an 82-inch extension set featuring two additional luer-activated Y-sites, an extra pinch clamp, and a spin lock, all supplied sterile. Packaging must comply with commercial standards as outlined in the procurement document, requiring each unit to be sealed in a protective container and shipped in suitable exterior packaging capable of surviving transport at the lowest cost to the delivery point in Waco, Texas, 76707-1019. All items must be marked in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and copies of the standard are available through DLA Troop Support. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Government identification must be removed from non-accepted supplies. The solicitation number is SPE2DS-26-T-273C, with a response deadline of August 3, 2026, and delivery required within 20 days after award. The contracting office is under the Department of Defense’s Medical Supply Chain, with Allen Costello listed as the primary point of contact.

Surgical Appliance and Supplies Manufacturing

POSTED

about 18 hours ago

DEADLINE

PAD, NONADHERENTThe contract specifies the procurement of sterile, nonadherent PADs measuring 3 inches by 8 inches, supplied in packages of 50 units each. Each pad is individually packaged with perforated plastic film covering on both sides, made from white cotton nonwoven material, and designed to remain sterile until use. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. Packaging must comply with commercial standards as outlined in the procurement document, requiring each unit to be sealed in a protective container and shipped in suitable exterior containers that ensure safe delivery by common carrier at the lowest cost. All items must be marked in accordance with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. The NSN is 6510-00-986-2942, with a quantity of four packages required and delivery due within 20 days of award. The solicitation is issued under SPE2DS-26-T-271X by the Department of Defense’s Medical Supply Chain, with Marc Canalichio as the primary point of contact.

Surgical Appliance and Supplies Manufacturing

POSTED

about 18 hours ago

DEADLINE

BRACE, WRIST AND FOREARThis contract specifies the procurement of five units of a wrist and forearm brace with NSN 6515-01-738-5237 and manufacturer part number 79-87305, supplied by DJO LLC and Cardinal Health 200, LLC. The item is classified as a Class I medical device under FDA Regulation 890.3475, requiring compliance with registration, labeling, and GMP standards even if a 510(k) is not mandatory. The contract mandates strict adherence to DLA packaging standards, including MIL-STD-2073-1E for packing methods and Commercial Packaging as defined in medical procurement guidelines, with all units sealed in protective containers suitable for carrier transport. Medical Marking Standard No. 1 supersedes MIL-STD-129, and all packaging must be labeled accordingly to ensure proper identification and handling. Delivery is required FOB destination within five days of award, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The designated delivery and shipping address is Joint Base Pearl Harbor-Hickam, Hawaii, with specific tracking identifiers and transportation references provided. The solicitation number is SPE2DS-26-T-272P, with a response deadline of August 3, 2026, and the unit price is $5.00 per unit, totaling $25.00. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Covered Defense Information provisions may apply, and all bidders must be referred to the FDA product specialist via EBS with complete manufacturer and item details. Packaging must comply with DLA’s RP001 requirements and palletization standards, and all materials must be marked per Medical Marking Standard No. 1, obtainable through DLA Troop Support. The point of contact for inquiries is James Burke, and the procurement is managed under the Department of Defense’s Medical Supply Chain division.

POSTED

about 18 hours ago

DEADLINE

NEEDLE, HYPODERMICThe contract specifies the procurement of a 21-gauge hypodermic needle, unit of issue being a box of twelve, with a mandatory shelf life of 60 months from manufacture, no more than nine months of which may have elapsed by the time of delivery to the government. Packaging must comply with commercial standards as outlined in the procurement document, with each needle sealed in a protective unit container and grouped within robust shipping containers suitable for safe transport via common carrier at the lowest cost to the designated delivery point. All items must be marked in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129, and must include the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, contract or lot number, and the prefix “MFD” before the lot number and manufacture date. The product is regulated by the FDA, requiring a referral through EBS for confirmation prior to award. Packaging must meet ASTM D3951 but is subject to precedence by all DLA Master List of Technical and Quality Requirements, with palletization following RP001. The delivery is FOB destination within five days, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Shipments must not use parcel post and must be sent via the fastest traceable method to the specified government addresses, with detailed routing through the NMCS system and reference to the contract SPE2DS-26-T-270N and NSN 6515-01-660-3150. The required delivery date is July 28, 2026, and the contract is tied to specific manufacturers including Becton, Dickinson and Company, Medline Industries, LP, McKesson, and Tribalco LLC, each with their respective part numbers.

Surgical and Medical Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE

DRESSING, OCCLUSIVE,This contract specifies the procurement of occlusive chest wound seal dressings, designed as adhesive, translucent, latex-free products with hydrophilic gel adhesion and adhesive on one side, lacking a vent and packaged in a resealable protective container for backup sealing. Each unit of issue contains two dressings per package, and the item must maintain a non-extendable shelf life of 36 months, with no more than five months elapsed from the manufacturer’s date to the delivery date to the government. The item is subject to rigorous technical and quality requirements identified under R and I numbers in the DLA Master List, and packaging must comply with DLA standards. Government identification must be removed from non-accepted supplies, and the NSN 6510-01-581-0553 is being procured in a quantity of 10 packages under purchase request 7017617196, with delivery required within five days of award. The solicitation, issued under SPE2DS-26-T-272Z on July 26, 2026, with a response deadline of August 3, 2026, is managed by the Department of Defense’s Medical Supply Chain and will be performed at Fort Bragg, North Carolina, 28310. Primary point of contact is Tiffany Parker, reachable via email and phone provided.

Corrugated and Solid Fiber Box Manufacturing

POSTED

about 18 hours ago

DEADLINE

NEEDLE, DISPENSING, FThe contract specifies the procurement of two dispensing needles for fiber optic applications, designated by NSN 6515-01-532-2085, intended for medical use and tied to Purchase Request 7017611639. Each unit must be packaged commercially as outlined in the procurement documentation, with every complete unit enclosed in a sealed container capable of preventing damage or breakage. The units must be shipped in suitable commercial exterior containers that ensure safe delivery by common carriers at the lowest possible rate to the designated delivery point. All items must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must provide the source and part number being supplied. Technical and quality requirements referenced under RA001 are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must adhere to DLA’s procurement standards, and non-accepted supplies must have all government identification removed. The solicitation, issued under SPE2DS-26-T-272D, has a response deadline of August 3, 2026, with a required delivery timeline of 20 days after award, and is managed by the Department of Defense’s Medical Supply Chain under the primary point of contact Olusola Emmanuel.

Surgical and Medical Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE

TUBE, SORBENTThe tube is a sorbent sampling device with XAD-2 sorbent material totaling 140/270 mg, housed in a glass tube measuring 75 mm in length with an outer diameter between 13 and 8 mm, divided into two sections. It includes a glass fiber filter, foam, and Teflon ring separators (FFGT), glass open ends, and a protective cover. Each unit is packaged in groups of ten per package, identified as one PG. The item is subject to strict packaging requirements under DLA standards, including commercial-grade sealed unit containers and shipping packaging capable of ensuring safe delivery at the lowest carrier rates, with labeling following Medical Marking Standard No. 1, which supersedes MIL-STD-129. Technical and quality specifications referenced in the DLA Master List govern the item’s compliance, and it is classified as a TYPE I (CODE H) item with a non-extendable shelf life of 12 months, meaning no more than one month may have passed from the date of manufacture to the date of government delivery. All packaging must clearly display the date of manufacture, expiration or retest date, and contract or lot number per the latest revision of MMS1C. The item is identified by NSN 6550-01-566-1504 and falls under solicitation SPE2DS-26-T-270D, with a delivery deadline of 20 days after award. Covered defense information may apply, and government identification must be removed from rejected supplies. The contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance to be conducted at Scott AFB, 62225-5252, and direct point of contact is Mary-Kathryn Donahue.

Family Planning Centers

POSTED

about 18 hours ago

DEADLINE

BRUSH, BRISTLE, DENTAL HThe contract specifies the procurement of a dental handpiece bristle brush designed for polishing around the necks of teeth and embrasures between teeth of plastic dentures. The brush features a stiff bristle configuration with a disk diameter ranging from 0.719 to 0.781 inches and is mandrel-mounted, with each package containing twelve units. The item is identified by NSN 6520-01-056-7376 and is to be delivered in a single package quantity within twenty days of award. The solicitation number is SPE2DS-26-T-272J, with a response deadline of August 3, 2026, and a posted date of July 26, 2026. The procurement falls under NAICS code 339114 and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance occurring at Camp Lejeune, North Carolina. Bidders must clearly indicate the source and part number being offered. The contract incorporates technical and quality requirements from the DLA Master List, applies DLA packaging standards, and mandates the removal of government identification from non-accepted supplies. Covered defense information may apply, and all submissions must comply with federal acquisition protocols.

Dental Equipment and Supplies Manufacturing

POSTED

about 18 hours ago

DEADLINE

SYRINGE AND NEEDLE, HYPThe contract specifies the procurement of sterile, disposable, plastic hypodermic syringes with 23-gauge, 1-inch needles, each with a 3-milliliter capacity, packaged in quantities of 100 units per package. The item is identified by NSN 6515-00-149-1206, with a total order quantity of two packages. A shelf life of 60 months, non-extendable, applies under requirement RS001 for TYPE I items, and packaging must comply with DLA packaging standards. All technical and quality specifications referenced by R or I codes are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is subject to requirements for covered defense information and mandates the removal of government identification from non-accepted supplies. Bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-270C, was posted on July 26, 2026, with responses due by August 3, 2026, and delivery is required within five days of award to Groton, Connecticut, with the primary point of contact being Dorothy Marquis of the Department of Defense’s Medical Supply Chain.

Surgical and Medical Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE

APRON, X-RAY PROTECTIVEThe contract is for two X-ray protective aprons, each designed as a sleeveless, form-fitting coat with tie tapes for secure closure. The aprons feature a lightweight back weighing 10 pounds and measure 38 inches in length and 24 inches in width. They must be constructed from lead-impregnated plastic or a combination of lead and tin impregnated plastic, providing radiation protection equivalent to a minimum of 0.5mm of pure lead. The unit of issue is each, and delivery is required within 10 days of award. The aprons must comply with DLA packaging requirements and all referenced technical and quality standards listed in the DLA Master List of Technical and Quality Requirements. The National Stock Number is 6532-00-935-9765, and the purchase request number is 7017612566. The solicitation, issued under contract SPE2DS-26-T-272F, is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance required at Fort Bliss, Texas. The primary point of contact is Tiffany Parker, reachable via phone and email provided. The response deadline for bids is August 3, 2026, and the solicitation was posted on July 26, 2026. Any non-accepted supplies must have government identification removed prior to return.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

GLOVES, DISPOSABLEThe contract specifies the procurement of disposable nitrile rubber gloves in a Bear Claw Glove Kit configuration, sized large with a sand color, measuring 11.8 inches in length, featuring a beaded cuff, 8 mil thick fingertips, 6 mil thick palm, and 4.7 mil thick cuff. The gloves are designed for single-use only and are individually wrapped in pairs. Each unit of issue is a package containing 25 pairs, with a total quantity of five packages required. The product is identified by NSN 8415-01-600-0262 and must comply with DLA packaging requirements and technical quality standards outlined in the DLA Master List of Technical and Quality Requirements. The item is to be delivered within 20 days of award to Fort Campbell, with the procurement governed under solicitation SPE2DS-26-T-271P, issued on July 26, 2026, and requiring responses by August 3, 2026. The acquiring agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, and all non-accepted supplies must have government identification removed prior to return. The primary point of contact for inquiries is Tiffany Parker, reachable via email and phone.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE

SYRINGE AND NEEDLE, HYPThe contract specifies the procurement of sterile, disposable, safety-mode hypodermic syringes with integrated automatic needle retraction, each with a nominal length of one inch and a capacity of 0.5 cubic centimeters up to 3 cubic centimeters. The syringes must be non-toxic, non-pyrogenic, feature a solid dark color, and include a plunger designed not to depress prematurely. Each unit must be individually sealed in a protective container and packed in commercial shipping containers suitable for safe transport via common carrier to the delivery point, with packaging compliant with Medical Marking Standard No. 1, which replaces MIL-STD-129. The unit of issue is a package of 100 syringes, with a mandatory shelf life of 60 months and a restriction that no more than nine months may have passed between the manufacturer’s date and the delivery date to the government. Labeling must conform to the latest MMS1A standard, clearly indicating the manufacturer date, expiration or retest date, contract number, and lot number. The item is regulated by the FDA, and bidders must provide source and part number confirmation. The syringe is identified by NSN 6515-01-452-0465, with a total quantity of 10 packages requested under solicitation SPE2DS-26-T-272T, requiring delivery within 20 days of award to Luke AFB, Arizona. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. All packaging and marking must meet DLA’s stringent standards for military medical procurement.

Surgical and Medical Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE