Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Solid Rubber Sheets (Class 1, Type A, Grade 40)

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through the Department of Defense DDSP New Cumberland Facility involves the supply of 108 solid rubber sheets to prime contractors for DLA supply contracts. The materials must strictly adhere to Class 1, Type A, Grade 40 specifications, with nominal dimensions of 36 inches in length, 36 inches in width, and 0.187 inches in thickness. Quality requirements dictate that both surfaces must be smooth and entirely free from cloth imprints. The contract mandates that all delivered rubber sheets must retain at least 85 percent of their 180 month shelf life. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 326299. The response deadline for this requirement is November 9, 2026.

General Info

Supply 108 specific rubber sheets to DoD New Cumberland by November 9, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

NAICS

326299 - All Other Rubber Product Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E5-27-T-0301.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RUBBER SHEET, SOLID

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies solid rubber sheets for prime contractors delivering DLA supply contracts. Provides rubber sheets meeting Class 1, Type A, Grade 40 specifications, nominally 36" L x 36" W x 0.187" T. Ensures surfaces are smooth on both sides and free from cloth imprints. Delivers material with at least 85% of its 180-month shelf-life remaining. Delivers 108 sheets of solid rubber meeting specified dimensions and grade.

Similar Contracts

Same NAICS industry code

Supply of Solid Rubber Sheet with Cloth InsertThis subcontract, issued by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate, requires the provision of 47 square yards of solid rubber sheeting with a cloth insert. The material must be manufactured or sourced to meet NSN 5330-00-333-0313 specifications. The contract is designated as a Total Small Business Set-Aside under NAICS code 326299. The supplier must adhere to strict regulatory and quality standards, including the Buy American Act and the Berry Amendment. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129 Special Marking Code 32, while hazardous materials must be labeled according to 29 CFR 1910.1200. The response deadline for this requirement is November 12, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 23 hours ago

DEADLINE

Supply of Hatch Seals (NSN 5330-00-553-0148)This subcontract involves the procurement or manufacture of six specialized hatch seals under NSN 5330-00-553-0148 for the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The selected provider must ensure all seals meet strict technical specifications and comply with the DLA Master List of Technical and Quality Requirements. The contract allows for the potential use of additive manufacturing subject to ESA evaluation and requires the provider to disclose their CAGE code and status as either an original equipment manufacturer or a distributor. The opportunity was posted on October 27, 2026, with a response deadline of November 9, 2026. It falls under NAICS code 326299 and is intended for prime contractors delivering on DLA supply contracts. Interested parties can find further details through the DIBBS portal using the provided solicitation link.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 23 hours ago

DEADLINE

BODY, REGULATOR, BREA

Solicitation # SPE8E6-27-T-0371

This solicitation, issued by DLA Troop Support Construction and Equipment, is for the procurement of 120 units of regulator bodies, identified by NSN 4220-01-586-5963. The contract requires delivery within 69 days after receipt of the order, with a need ship date of January 18, 2027, and a final required delivery date of February 11, 2027. Delivery is designated as FOB Destination to DLA Distribution San Joaquin in Tracy, California. While the solicitation is not a small business set-aside, it incorporates a HUBZone price evaluation preference and may be eligible for automated award. Compliance requirements are stringent, necessitating adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging and labeling must comply with MIL-STD-129 and RP001 for palletization. Quality assurance is managed through the submission of a Certificate of Quality Compliance (COQC) for each manufacturing lot, which must be uploaded to the iRAPT system. Invoicing and receiving reports must be processed electronically via the Wide Area WorkFlow (WAWF) system. Additionally, the contractor must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards.

DLA DIST SAN JOAQUIN

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7L5-27-T-0407

Solicitation SPE7L5-27-T-0407 is issued by the DLA Weapons Support Land Supplier Opns Engines for the procurement of 27 V-belts, identified by NSN 3030-14-57-84166 and part number 24677230 for Volvo Penta AD56N. The requirement is categorized under NAICS code 326299. The contract is a fixed-price acquisition with a required delivery date of April 6, 2027, and a delivery lead time of 147 days after order. Delivery is specified as FOB Origin, with the final destination and acceptance point being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement incorporates strict technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Palletization must adhere to DLA packaging requirements RP001. Administrative requirements mandate the use of the Wide Area WorkFlow system for electronic invoicing and payment processing. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards is required. The solicitation may be a candidate for automated award and includes a price evaluation preference for HUBZone concerns. Quotations were due by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 23 hours ago

DEADLINE

RUBBER SHEET, SOLID

Solicitation # SPE8E5-27-T-0301

Solicitation SPE8E5-27-T-0301 is a small business set-aside issued by the Defense Logistics Agency for the procurement of 108 sheets of solid rubber (NSN 9320-00-241-9747). The material must be Class 1, Type A, Grade 40, with nominal dimensions of 36 by 36 inches and a thickness of 0.187 inches. The rubber must be smooth on both sides and free from cloth imprint, adhering to basic specification MIL-PRF-6855/1A and reference specification MIL-PRF-6855F(1). A critical requirement includes a First Article Test (FAT) and a shelf-life mandate requiring at least 85 percent, or 153 months, of the 180-month shelf-life to remain at the time of delivery. The contract specifies that inspection and acceptance will occur at the origin. Marking must be performed every three feet in accordance with MIL-STD-190C, including the specification number, revision letter, type, class, and the date of cure or manufacture. Delivery is required within 140 days after receipt of order, with offers submitted based on FOB Origin. Invoicing and payment must be processed electronically through the Wide Area Workflow system. Compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity standards is required. All quotations must be submitted via the DLA Internet Bid Board System by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE8E6-27-T-0369

Solicitation SPE8E6-27-T-0369 is a fixed-price request for the procurement of two diver's suits, specifically identified as Henderson Aquatics Inc 4R507 P/N UST875MB-XL with NSN 4220016872496. The contract is managed by the Defense Logistics Agency (DLA) for delivery to the DDSP New Cumberland Facility in Pennsylvania. The required delivery date is December 1, 2026, with a need ship date of October 13, 2026, and a delivery window of 95 days after receipt of order. Shipping is established as FOB Origin, with both inspection and acceptance occurring at the destination. The procurement is subject to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must comply with MIL-STD-129 and RP001 for palletization. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Key regulatory compliance mandates include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Quotations for this requirement were due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE8E6-27-T-0377

Solicitation SPE8E6-27-T-0377, issued by the Defense Logistics Agency Troop Support Construction and Equipment, is for the procurement of seven diver's knives, identified by NSN 4220-01-588-7197. The requirement specifies a delivery period of 20 days after award, with an original required delivery date of March 18, 2026. Shipping is designated as FOB Destination, with delivery locations including a parcel post address at FPO AE 09645-0010 and a freight address at Naval Station Rota, Spain. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates several critical regulatory requirements, such as the Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment, NIST SP 800-171 assessment requirements, and the safeguarding of covered defense information under DFARS 252.204-7012. Additionally, the contractor must comply with the Buy American Act and the Berry Amendment regarding domestic material restrictions. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

Specialized Materials Supply for Watch Supervisor ChairThis subcontract, titled Specialized Materials Supply for Watch Supervisor Chair, is issued by the Department of Defense under the Navsup Weapon Systems Support Mech agency. The contractor is responsible for sourcing and delivering raw materials and hardware components, including metals, polymers, or specialized fabrics, to prime contractors working on NAVSUP WSS-MECH CODE N94 projects. All supplied materials must strictly adhere to military specifications or CIDs cited in the Technical Data Package. To ensure full compliance with technical requirements, the provider must furnish all necessary material certifications and mill test reports. The opportunity was posted on October 27, 2026, with a response deadline of November 27, 2026. The project falls under NAICS code 326299, focusing on the procurement of certified materials essential for the production of the Watch Supervisor Chair.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Fluorocarbon Clay Rubber Seal SupplyThis subcontract opportunity involves the supply of high-performance fluorocarbon clay rubber seals designed for Tainter Valve assemblies on USACE projects. The materials must strictly comply with ISO 15.D1 standards to ensure operational integrity. The selected provider will be responsible for delivering completed seal kits directly to the designated repair facility. Managed by the Department of Defense under the W071 Endist Portland agency, the contract falls under NAICS code 326299. The performance location is situated in zip code 98635. Interested parties must submit their responses by the deadline of November 30, 2026.

W071 Endist Portland

POSTED

DEADLINE

in about 1 month

42--LIFE RAFT,INFLATABLE

Solicitation # SPE8E6-27-Q-0062

Solicitation SPE8E6-27-Q-0062 is a firm fixed price contract issued by the Defense Logistics Agency for the procurement of 18 inflatable life rafts, identified by NSN 4220-99-436-2697. This requirement is designated as an Air Force Critical Safety Item and a Critical Item Managed asset, requiring strict adherence to DLA Technical and Quality Deskbook Appendix 15 and SPC 06 guidelines. The award is restricted to the approved source, with technical specifications governed by MIL-PRF-81542D(1) and TDP Rev B Gen 3. Delivery is required within 60 days after receipt of order, with a customer required delivery date of June 15, 2026. The contract mandates rigorous quality and safety standards, including SAE AS9100 higher-level quality requirements and the performance of a First Article Test per FAR 52.209-3. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, with specific requirements for marking lot and serial numbers, contractor CAGE codes, and manufacturer CAGE codes on each unit pack. Inspection and acceptance are conducted at the origin. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with DFARS 252.204-7012 for safeguarding covered defense information.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Cellular Rubber Sheets (NSN 9320-00-069-5177)This subcontract involves the manufacture or procurement of 65 cellular rubber sheets for prime contractors working on DLA Troop Support Construction and Equipment projects. The materials must strictly adhere to NSN 9320-00-069-5177 and DLA Master List requirements. All deliverables must be delivered to DLA Distribution San Diego and comply with the Buy American Act and the Berry Amendment. The contractor is responsible for rigorous quality control and logistics standards, including sampling per MIL-STD-105/ASQ Z1.4, packaging according to MIL-STD-2073-1E, and marking in accordance with MIL-STD-129. This Department of Defense requirement falls under NAICS code 326299 and is managed through the San Diego agency office.

POSTED

DEADLINE

RUBBER SHEET, CELLUL

Solicitation # SPE8E6-27-T-0360

Solicitation SPE8E6-27-T-0360 is a request for quotations issued by the DLA Troop Support Construction and Equipment office for the procurement of 65 sheets of cellular rubber sheet, identified by NSN 9320-00-069-5177. The requirement is fully competitive and based on military and federal specifications. Delivery is required within 78 days after receipt of order, with a target delivery date of November 9, 2026, shipping to DLA Distribution San Diego. The procurement is subject to destination inspection and acceptance, with quality requirements governed by the DLA Master List of Technical and Quality Requirements and sampling plans following MIL-STD-105/ASQ Z1.4. The contract mandates strict adherence to packaging and marking standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Key regulatory requirements include the Buy American Act and the Berry Amendment for domestic sourcing, as well as NIST SP 800-171 and DFARS 252.204-7012 for cybersecurity and safeguarding covered defense information. Offers produced via additive manufacturing are ineligible for award unless authorized. Invoicing must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 6, 2026, with a price evaluation preference provided for HUBZone small business concerns.

POSTED

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Supply of Copper Alloy Globe ValvesThis subcontract involves the supply of two copper alloy straight-thru globe valves for prime contractors supporting the Defense Logistics Agency. The valves must be manufactured or sourced to meet NSN 4820-01-233-8947 specifications, with strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E and RP001 for packaging. Performance will take place in New Cumberland. The agreement mandates full compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 cybersecurity standards. Interested parties must respond by November 9, 2026, regarding this Department of Defense requirement under NAICS code 331421.

Copper Rolling, Drawing, and Extruding

POSTED

about 23 hours ago

DEADLINE

Headlight Unit Supply (NSN 6220017358585)This subcontract involves the manufacture or distribution of 25 specialized headlight units, specifically Hoffman Engineering part number 725-1020-004, to support prime contractors for DLA Troop Support. The supplier must ensure all units are produced according to technical drawings and revisions, with packaging meeting RP001 and MIL-STD-129 standards. Delivery is required FOB Origin to the DDSP New Cumberland Facility. The contract mandates strict adherence to the Buy American Act and DFARS cybersecurity safeguarding regulations. Classified under NAICS code 336320, the project is managed through the Department of Defense. Interested parties must respond by November 9, 2026, for the supply of these units identified by NSN 6220017358585.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of 2-Way Operational Valves (NSN 4820-01-145-6037)This subcontract involves the supply of 29 critical application 2-way operational valves for prime contractors supporting DLA Weapons Support Maritime Hardware and Electrical projects. The required valves must feature a 3/8 inch inlet, a 400 PSI rating, and an operational temperature range from -40 to +180 degrees Fahrenheit, constructed with bronze housing and stainless steel or monel trim. Engineering source approval is specifically required for Griswold Industries part number 79300A. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. All units must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Industrial Valve Manufacturing

POSTED

about 23 hours ago

DEADLINE

Battery Charger Manufacturer/SupplierThis subcontract through the Department of Defense DDSP New Cumberland Facility requires the manufacture or sourcing of 14 battery chargers for prime contractors supporting DLA supply contracts. The supplier must ensure all hardware meets specific technical specifications and the DLA Master List of Technical and Quality Requirements. Compliance with NIST SP 800-171 cybersecurity standards is mandatory for the duration of the agreement. Deliverables include 14 battery chargers that are packaged according to ASTM D3951 and marked and labeled in accordance with MIL-STD-129 and RP001. The place of performance is located in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 9, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supplier of Berry Amendment Compliant Tubing MaterialThis subcontract involves the supply of raw, domestic-sourced tubing material or resin for prime contractors working on DLA Troop Support projects. The materials must meet NSN 4240-01-568-9663 specifications and consist of medical-grade or food-grade polymers. To ensure compliance with the Berry Amendment and the Buy American Act, the supplier is required to provide Certificates of Conformance proving the domestic origin of all materials delivered to the manufacturer. The opportunity is associated with the Department of Defense and the DDSP New Cumberland Facility, with the place of performance located in New Cumberland. Interested parties must respond by November 9, 2026, regarding this requirement categorized under NAICS code 326199.

All Other Plastics Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

Manufacturer of Internal Drink Tubes (NSN 4240-01-568-9663)This subcontract involves the manufacture and supply of 140 internal drink tubes for prime contractors supporting DLA Troop Support projects at the DDSP New Cumberland facility. The tubes must be fabricated to NSN 4240-01-568-9663 specifications using precision molding or extrusion, ensuring that all delivered units have at least 85 percent of their shelf life remaining. The contractor must adhere to strict quality and regulatory standards, including SAE AS9003 or ISO 9001 quality systems and CMMC Level 2 certification. Compliance with the Berry Amendment is required, and all packaging must meet MIL-STD-129, MIL-STD-1168, and MIL-STD-2073-1E standards. Responses for this opportunity are due by November 9, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 23 hours ago

DEADLINE

Manifold Poppet ManufacturerThis subcontract with the Department of Defense DDSP New Cumberland Facility involves the manufacture and supply of two precision-machined manifold poppets under NSN 4820012684031. The selected manufacturer will utilize CNC and precision machining equipment to produce these components for prime contractors fulfilling DLA supply contracts. The contractor is required to adhere to the DLA Master List of Technical and Quality Requirements for all quality assurance and inspection processes. Additionally, all items must be packaged according to ASTM D3951 standards. The performance of this contract will take place in New Cumberland, Pennsylvania, under NAICS code 332710.

POSTED

about 23 hours ago

DEADLINE

Supply of Linear Directional Control ValvesThis subcontract involves the procurement and delivery of two Parker-Hannifin linear directional control valves, part number VDP11-D-10, for prime contractors supporting Department of Defense supply contracts for straddle carry trucks. The work is managed through the DDSP New Cumberland Facility and falls under NAICS code 423810. The contractor is responsible for ensuring all units are packaged according to MIL-STD-2073-1E and marked in compliance with MIL-STD-129. Additionally, all hazardous material labeling must adhere to 29 CFR 1910.1200 standards. The performance of this contract will take place in New Cumberland, Pennsylvania.

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Manufacturing and Supply of Nammo Defense Systems DecalsThis subcontract involves the manufacturing and supply of ten specialized decals for Nammo Defense Systems Inc., specifically part number 51906-3 with NSN 7690016256039. These components are intended for prime contractors fulfilling DLA Troop Support contracts and will be managed through the Department of Defense at the DDSP New Cumberland Facility. The contractor is responsible for ensuring all items are packaged according to ASTM D3951 and marked in compliance with MIL-STD-129. Additionally, the provider must adhere to the DLA Master List of Technical and Quality Requirements and follow RP001 palletization standards for final delivery to New Cumberland.

Commercial Screen Printing

POSTED

about 23 hours ago

DEADLINE

Manufacture of Turret Lock Bolts (Critical Gun Part)This subcontract involves the manufacture of Turret Lock Bolts for the Department of Defense, specifically supporting DLA Weapons Support projects at the DDSP New Cumberland Facility. The scope of work includes the development of custom tooling, metal casting using high-grade alloys, and precision post-casting machining. Because these components are classified as Critical Gun Parts and Critical Application Items, the process requires rigorous non-destructive testing to ensure strict adherence to safety and performance standards. The successful contractor is responsible for delivering three completed bolts accompanied by full material certifications and detailed inspection reports. This project falls under NAICS code 331511 and is being performed in New Cumberland, Pennsylvania. Interested parties must adhere to the response deadline of November 9, 2026.

POSTED

about 23 hours ago

DEADLINE

Supply of Flange, Gland, Valve (NSN 4820016962499)This subcontract through the Department of Defense DDSP New Cumberland Facility requires the manufacture or sourcing of one Flange, Gland, Valve unit under NSN 4820016962499. The selected provider must ensure the component meets all technical specifications and adheres to RP001 DLA Packaging Requirements for Procurement. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332911. Eligible contractors must possess a registered UEI and CAGE code to participate. The solicitation was posted on October 27, 2026, with a response deadline set for November 9, 2026. This effort supports prime contractors fulfilling broader DLA supply contracts.

Industrial Valve Manufacturing

POSTED

about 23 hours ago

DEADLINE

Specialized Military Packaging and MarkingThis subcontract involves providing specialized packaging and marking services for prime contractors supporting DLA Weapons Support Land Supplier projects. The scope of work requires the execution of packaging according to MIL-STD-2073-1E Preservation Method 31, marking per MIL-STD-129, and palletization following RP001 standards. The contractor must utilize military-grade wrap materials and unit containers to prepare eight units of hardware for shipment to the DDSP New Cumberland Facility. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 488410. Performance will take place in New Cumberland, Pennsylvania. Interested parties must adhere to the response deadline of November 9, 2026, to be considered for this Department of Defense requirement.

Motor Vehicle Towing

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS