Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Specialized Metal Stock for Retaining Rings

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement and delivery of certified raw metal alloy stock, specifically in the form of wire, rod, or sheet, to support prime contractors fulfilling DLA supply contracts. The materials must strictly adhere to the technical specifications for NSN 5365-01-608-3532 and are intended for the production of retaining rings. To ensure full regulatory compliance, the provider must supply all necessary material certifications and Mill Test Reports, specifically meeting the requirements of the Buy American and Balance of Payments programs. Managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 331110. The place of performance is designated as Tinker AFB, zip code 73145-8000. Interested parties must have submitted responses by the deadline of October 23, 2026, to provide these critical raw materials directly to the manufacturer.

General Info

Procurement of certified raw metal alloy stock for retaining rings at Tinker AFB.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

331110 - Iron and Steel Mills and Ferroalloy Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-1397.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RING, RETAINING, INSTRUM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw metal alloy stock for prime contractors delivering DLA supply contracts. Sources and delivers certified metal stock (wire, rod, or sheet) meeting technical specifications for NSN 5365-01-608-3532. Provides material certifications and Mill Test Reports to ensure compliance with Buy American and Balance of Payments program requirements. Delivers certified raw material to the manufacturer.

Similar Contracts

Same NAICS industry code

ANGLE, STRUCTURAL

Solicitation # SPE8E9-27-T-0124

Solicitation SPE8E9-27-T-0124 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of 79 feet of structural angle made from aluminum alloy, identified by NSN 9540002501058. The material must be supplied in whole foot lengths between 20 and 30 feet with a reference weight of 2.52 LB/FT and must conform to specific die numbers from approved manufacturers such as Alcoa, Pioneer, Reynolds, or Kaiser Aluminum. Technical specifications require the use of Alloy 6061 and Temper T6, adhering to standards including SAE AMS4150P, ASTM B660, and ASTM B666. A quantity variance of plus or minus 10 percent is permitted. The procurement mandates strict quality and eligibility requirements, limiting awards to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). Contractors must provide a Certificate of Quality Compliance with every shipment. Packaging and preservation must follow MIL-STD-2073-1E and ASTM B660, while marking must comply with MIL-STD-129 and include specific contract, material, and manufacturer data. Delivery is set for FOB Origin with a required delivery date of November 30, 2026, and a need ship date of March 28, 2027, to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. Payment and receiving reports must be processed electronically via the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0093

Solicitation SPE8E9-27-T-0093 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of corrosion-resistant steel metal plates under NSN 9515002044619. The material must be ASTM A240 Class 316L, hot rolled, annealed and either sand blasted or pickled overall, with dimensions of 0.500 inches thick, 72 inches wide, and 240 inches long. The total requirement is for four units, split across two line items of two units each. This procurement is set aside for certified Women-Owned Small Business (WOSB) concerns, and eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract mandates rigorous quality and identification standards, including the submission of a Certificate of Quality Compliance with every shipment. Materials must be supplied in whole feet lengths and feature continuous identification markings—including the contract delivery order number, NSN, and manufacturer details—applied via stamping or stenciling. Packaging must adhere to MIL-STD-2073-1E, ASTM A700, and RP001, requiring robust four-corner and edge protection with fiberboard coverage. Delivery is set for FOB Origin with a required delivery date of April 3, 2027, and inspection and acceptance will occur at the destination. Invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

BABA Compliant Construction Material SupplyThis subcontract agreement involves the supply of US-manufactured iron, steel, and construction materials for prime contractors working on projects for the Ware County Board of Commissioners in Georgia. The primary objective is to ensure that all sourced and delivered materials strictly adhere to the origin requirements set forth by the Build America, Buy America Act. The selected provider is responsible for delivering certified US-produced construction materials directly to the designated project sites. This opportunity, categorized under NAICS code 331110, was posted on October 15, 2026, with a response deadline of November 23, 2026.

Ware County Board of Commisioners

POSTED

DEADLINE

in about 1 month

Supply of Berry Amendment Compliant Metal StockThis subcontract involves the procurement and delivery of high-grade raw metal stock for prime contractors working on projects for the DLA Weapons Support ASC. The primary objective is to source and certify materials specifically required for NSN 5365-01-025-2858, ensuring all supplies are delivered directly to the manufacturer. A critical requirement of the contract is strict adherence to the Berry Amendment and the Buy American Act. The supplier must provide Mill Test Reports to certify compliance with these domestic sourcing regulations. The work is associated with NAICS code 331110 and is performed in Tracy, California, under the oversight of the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Raw Material Supply for High-Strength FastenersThis subcontract involves the supply of certified raw alloy steel or specialized alloy stock intended for prime contractors working on DLA Weapons Support ASC projects. The scope of work focuses on providing high-strength aerospace-grade metal stock that adheres to the technical specifications for NSN 5310-01-469-1427. To ensure quality and compliance, the supplier must furnish Material Test Reports to verify the chemical and physical properties of the metal and provide full traceability documentation. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance located in San Diego. A critical requirement for this engagement is strict compliance with the Buy American Act regarding the origin of the materials. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026, falling under NAICS code 331110.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Berry Amendment Compliant Raw Material for Shoulder BoltsThis subcontract involves the supply of raw metal stock bars and rods for prime contractors working on DLA Weapons Support ASC projects. The scope of work includes sourcing and smelting specialty alloy or steel in strict accordance with the technical data specified by NSN 5306-01-205-4337. The selected provider is responsible for delivering certified raw material stock directly to the manufacturer. A critical requirement of this contract is the provision of Material Test Reports to verify full compliance with the Berry Amendment, the Buy American Act, and DFARS 252.225-7036. The project falls under NAICS code 331110 and is managed by the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located in Tracy, California.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Berry Amendment Compliant Alloy/Steel SupplyThis subcontract involves the supply of raw metal stock, specifically certified bars and rods, for prime contractors working on DLA Weapons Support ASC projects. All materials must strictly adhere to the metallurgical specifications outlined in drawing 31442 LG05231 and be delivered directly to the manufacturer. To ensure compliance with the Berry Amendment and the Buy American Act, the supplier is required to provide Mill Test Reports verifying the domestic origin of the materials. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 331110 for the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Berry Amendment Compliant Material SupplyThis subcontract involves the sourcing and delivery of certified US-made raw aluminum alloys and nylon polymers to prime contractors supporting the Department of Defense Medical Supply Chain FSH. The provider is responsible for delivering these materials directly to the manufacturer, ensuring all shipments are accompanied by Certificates of Conformance to verify material specifications. Strict adherence to the Berry Amendment and the Buy American Act is mandatory for all supplied materials. The performance of this contract is centered in Fort Snelling, and the procurement falls under NAICS code 331110.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Specialized Metal Stock SupplyThis subcontract, titled Specialized Metal Stock Supply, involves the procurement of raw metal stock for prime contractors working on DLA Weapons Support ASC projects. The primary objective is to supply domestic metal alloys specifically for the manufacture of thumbscrews under NSN 5305000805381. To ensure strict adherence to technical specifications, the provider must deliver certified raw metal stock accompanied by mill test reports and material certifications. The contract is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division and falls under NAICS code 331110. Compliance with the Berry Amendment and the Buy American Act is mandatory to ensure the use of domestic materials. Performance for this contract is centered in New Cumberland, Pennsylvania, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Domestic Raw Material Supply for Machine BoltsThis subcontract, managed by the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division, involves the supply of raw metal stock for prime contractors fulfilling DLA supply contracts. The scope of work requires the provision of specialty alloy or carbon steel bars and wire that strictly adhere to the chemical and physical properties specified for NSN 5306-01-416-4997. To ensure quality and compliance, the supplier must provide Material Test Reports or Certificates of Conformance with all deliveries of certified raw material stock. A critical requirement of this agreement is strict adherence to domestic sourcing restrictions, specifically the Buy American Act and the Berry Amendment. The contract falls under NAICS code 331110 and specifies the place of performance in Tracy, California. Interested parties must note the response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Berry Amendment Compliant Raw Material SupplyThis subcontract involves the sourcing and delivery of high-grade alloy or steel raw metal stock for prime contractors supporting DLA Weapons Support ASC projects. The materials must strictly adhere to the metallurgical requirements of NASM/NAS standards specifically for NSN 5306-00-151-1466. All deliveries must include mill certifications to verify the material grade and origin. Compliance with the Berry Amendment and the Buy American Act is mandatory for this requirement. The project falls under NAICS code 331110 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, with the place of performance located in New Cumberland.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Steel Bar Manufacturing (Cold Drawn and Annealed)This subcontract involves the manufacture of Steel Comp L2 cold drawn and annealed bar for prime contractors supporting Defense Logistics Agency Troop Support procurement projects. The specific requirements call for steel bars with a thickness of 0.250 inches and a width of 2.000 inches, identified by NSN 9510-00-555-4965. Production must utilize precision cutting tools and industrial equipment for cold drawing and annealing, with all finished products accompanied by Mill-Material Certification. The project falls under NAICS code 331110 and mandates strict adherence to the Buy American Act, the Berry Amendment, and ASTM A700 standards. Interested parties should note the response deadline of October 26, 2026, for this Department of Defense initiative.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Aircraft Diverter Strip Supplier (NSN 1680-01-581-8044)This subcontract opportunity is for the supply of aircraft diverter strips, specifically NSN 1680-01-581-8044, to support prime contractors on projects for the DLA Weapons Support ASC. The selected supplier is responsible for manufacturing or sourcing the components, ensuring physical identification and bare item marking according to RQ017, and executing packaging in compliance with RP001 DLA standards. All finished goods must be delivered via F.O.B. Destination. To be eligible, contractors must possess a valid CAGE code and hold CMMC Level 2 certification verified by a C3PAO. This requirement falls under NAICS code 336413 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

DIVERTER STRIP, AIRC

Solicitation # SPE4A7-27-R-0030

Solicitation SPE4A7-27-R-0030, issued by the DLA Weapons Support ASC, is a request for proposals for an Indefinite Delivery Contract for aircraft diverter strips, NSN 1680-01-581-8044. The contract features a five-year base period with no options, an estimated annual demand of 40 units, and a guaranteed minimum of 10 units. Delivery is FOB Destination within the Continental United States, with a requested production delivery schedule of 280 days. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans to ensure no non-conformances. This procurement is subject to stringent security and quality controls, including CMMC Level 2 certification and the safeguarding of covered defense information. The items are designated as critical application items subject to configuration and export control under ITAR or EAR regulations. Contractors must comply with DLA packaging requirements and MIL-STD-129 marking standards, specifically regarding bare item identification. Award decisions will be based on a comparative assessment of price and past performance, with heavy weighting placed on SPRS/PIPRS assessments. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Lock Pins for Submarine SwitchboardsThis subcontract involves the procurement of specialized lock pins, identified by NSN 5315-01-470-2949, intended for prime contractors supporting Department of Defense submarine switchboard assemblies. The selected provider is responsible for manufacturing or sourcing the pins and ensuring each unit is marked with a Unique Item Identifier using two-dimensional data matrix symbology in accordance with ISO/IEC 16022 standards. Strict adherence to supply chain traceability requirements per C03 is mandatory, necessitating the use of specialized UID marking equipment. The contract is managed under the DLA Weapons Support ASC Supplier OE and AF Division with a NAICS code of 332722. Logistics require the physical delivery of the lock pins to DLA New Cumberland, while the corresponding UID data must be submitted electronically via the Wide Area Workflow system.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

in about 23 hours

Aerospace Surface Treatment and CoatingThis subcontract opportunity, titled Aerospace Surface Treatment and Coating, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division. The project involves providing specialized surface treatments, anodizing, and protective coatings for structural plates used by prime contractors. All work must be performed using controlled chemical processing in strict accordance with Drawing 81205 BAC5300, with mandatory verification of coating thickness and adhesion to meet aerospace standards. The contract is designated as a Total Small Business Set-Aside under NAICS code 332813. Qualified bidders must maintain ISO 9001:2015 certification and ensure full compliance with FED-STD-313 for the handling of hazardous materials. The solicitation was posted on October 16, 2026, with a response deadline of October 23, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Supply of Certified Aircraft-Grade Structural Plate StockThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves the supply of certified aircraft-grade structural plate stock for prime contractors. The materials must strictly adhere to the alloy and temper specifications outlined in Drawing 81205 BAC5300. To ensure quality and regulatory compliance, the provider is required to deliver full traceability for all raw material, accompanied by Material Test Reports and Certificates of Conformance that meet the standards of the Buy American Act and DFARS counterfeit part detection protocols. The opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 336413. Interested parties must respond by October 23, 2026, following the posting date of October 16, 2026. This contract focuses on maintaining high-grade material integrity for critical defense projects through rigorous certification and documentation requirements.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Precision Machining of Structural Aircraft PlateThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, involves the precision machining, milling, and finishing of structural aircraft plates, specifically part number 5-70764-1029. The work must be executed according to Engineering Note EI-016505406 and Reference Drawing 81205 BAC5300. Quality assurance requires the use of calibrated Measuring and Test Equipment per RT001 and adherence to sampling standards MIL-STD-1916 or ASQ H1331. The opportunity is a total small business set-aside under NAICS code 336413. To be eligible, contractors must maintain ISO 9001:2015 certification and meet CMMC Level 2 security requirements. The solicitation was posted on October 16, 2026, with a response deadline of October 23, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of PIN-RIVET (NSN 5320-00-929-6443)This subcontract involves the procurement of 11,000 units of PIN-RIVET hardware, identified by NSN 5320-00-929-6443, to support prime contractors delivering DLA supply contracts for Air Logistics Centers. The selected provider is responsible for manufacturing or sourcing hardware that strictly adheres to the specified national stock number requirements. All deliverables must be packaged according to ASTM D3951 and marked in compliance with MIL-STD-129 and RP001 standards. Additionally, the contract requires DLA J34 export control approval. This effort is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Division.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

in about 23 hours

MIL-SPEC Packaging and Marking Services for Defense HardwareThis subcontract involves providing specialized packaging and marking services for defense hardware supporting the DLA Weapons Support ASC. The scope of work requires the packaging of 37,000 pins in accordance with MIL-STD-2073-1E and the marking of items per MIL-STD-129 and MIL-STD-130, which includes the application of Unique Identification. The contractor must utilize UID laser etching equipment and MIL-SPEC materials to ensure all hardware is properly prepared and palletized per RP001 standards for final delivery to DLA Distribution Anniston. Managed under NAICS code 333613 for the Department of Defense, the project demands the delivery of fully packaged and palletized hardware ready for immediate shipment. Interested parties should note the tight response window following the October 16, 2026, posting date. The contract ensures that all prime contractor requirements for the Army and Air Force divisions are met through strict adherence to military specifications.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

in about 23 hours

Precision Machining and Fabrication of Quick Release PinsThis subcontract involves the precision machining and fabrication of 37,000 Quick Release Pins for prime contractors supporting the DLA Weapons Support ASC. The manufacturer must produce the units in strict accordance with TDP Rev B Gen 3 and Drawing NR 19207 10931133, utilizing precision CNC machining and calibrated measuring and test equipment as mandated by requirement RT001 for Critical Application Items. To ensure compliance with security and export regulations, the contractor is required to maintain CMMC Level 2 and US/Canada JCP certification for handling export-controlled data. The final deliverable consists of 37,000 finished pins that meet all specified technical data package requirements for the Department of Defense.

Precision Turned Product Manufacturing

POSTED

DEADLINE

in about 23 hours

Supplier of Hydraulic Selector Sets (NSN 1650-00-604-4752)This subcontract involves the procurement and delivery of 34 hydraulic selector sets, part number 214156 and NSN 1650-00-604-4752, to support prime contractors on DLA aviation projects. The Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Div, requires the supplier to perform rigorous quality assurance inspections to ensure part number accuracy and the total absence of corrosion. The selected supplier must adhere to ISO 9001:2015 standards and maintain strict supply chain traceability under C03 requirements. The final deliverable consists of 34 inspected and certified selector sets, with the solicitation process concluding on October 27, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Supply of Cell Assembly, Optical Instrument (NSN 5855-01-442-6413)This subcontract involves the procurement of 860 units of Cell Assembly, Optical Instrument (NSN 5855-01-442-6413), specifically Elbit Systems of America part number 268788. These components are intended for prime contractors supporting DLA Weapons Support ASC contracts under the Department of Defense. All deliveries must adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards to ensure military compliance. To be eligible, suppliers must provide authorized dealer certification from the approved source of supply and maintain ISO 9001:2015 certification. Additionally, a CMMC Level 2 self-assessment is required. The solicitation was posted on October 16, 2026, with a response deadline of November 16, 2026, falling under NAICS code 334511.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Supply of High-Strength Blind Rivets (NAS/Huck Standard)This subcontract involves the supply of 1,791 high-strength blind rivets, identified by NSN 5320-00-150-4092, for prime contractors working on DLA Weapons Support ASC projects. The required components must be commercial off-the-shelf items meeting either NAS80205 P/N NAS1919B04-02 or Huck International P/N MLSPB04-02 standards. Due to the critical nature of the application, the provider must maintain rigorous quality control systems to ensure part integrity. The contract specifies strict logistics and handling requirements, including packaging and labeling according to MIL-STD-129 and palletization following RP001 and ASTM D3951 guidelines. All units are to be delivered to Depot Hill, Utah. This procurement is managed by the Department of Defense under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

in about 23 hours

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS