Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Specialized Spring Steel/Alloy

Active

Federal

Response Deadline10/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of specialized raw metal stock, specifically certified high-tensile spring steel or specified alloy wire and sheet, to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The materials must strictly adhere to the metallurgical specifications for NSN 5310-01-106-0212 and be delivered directly to the manufacturer. To ensure regulatory compliance, the provider must furnish Material Test Reports confirming that all supplies meet the requirements of the Buy American Act and the Berry Amendment. The performance of this contract is centered in Texarkana, Texas, under NAICS code 331110, with a response deadline set for October 30, 2026.

General Info

Supply certified high-tensile spring steel to DLA contractors in Texarkana by October 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

331110 - Iron and Steel Mills and Ferroalloy Manufacturing

Place of Performance

TEXARKANA, TX, 75507-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-6414.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WASHER, SPRING TENSION

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw metal stock for prime contractors delivering DLA Weapons Support ASC hardware. Provides certified high-tensile spring steel or specified alloy wire/sheet meeting metallurgical specifications for NSN 5310-01-106-0212. Provides Material Test Reports (MTRs) ensuring compliance with the Buy American Act and Berry Amendment. Delivers certified raw metal stock to the manufacturer.

Similar Contracts

Same NAICS industry code

CRES 304 Raw Material SupplyThis subcontract involves the supply of certified CRES 304 raw material billets or bar stock to support prime contractors working on projects for the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for sourcing and delivering corrosion resistant steel that includes full material traceability and certifications directly to the manufacturer. Performance of this contract takes place in Cherry Point, North Carolina, under NAICS code 331110. All materials provided must strictly adhere to the requirements of the Buy American Act and the Berry Amendment. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

Berry Amendment Compliant Alloy/Steel SupplyThis subcontract, titled Berry Amendment Compliant Alloy/Steel Supply, involves the procurement of raw metal stock and high-strength alloys for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The scope of work focuses on sourcing materials that meet specific metallurgical requirements for NSN 4310013677607, with all deliveries requiring accompanying Material Test Reports. The contract is designated as a Total Small Business Set-Aside under NAICS code 331110, with performance located in Tracy, California. Strict compliance is required regarding the Berry Amendment and the Buy American Act, necessitating certifications of origin and mercury-free verification. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Supplier of 4140 Cold Finished Steel BarThis subcontract involves the supply of 4140 cold finished, round, and annealed steel composite metal bars to prime contractors supporting Defense Logistics Agency supply contracts. The required materials must have a 4.000 inch diameter and lengths between 10 and 12 feet, and must be delivered with Mill-Material Certification. Performance for this contract will take place in Annville, Pennsylvania, under NAICS code 331110. To be eligible, suppliers must maintain a QSLD listing for FSGs 95 and 96. The contract mandates strict adherence to several regulatory and quality standards, including the Buy American Act, the Berry Amendment, MIL-STD-129, and ASTM A700. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

Grade DH36 Structural Steel Plate SupplierThis subcontract involves the supply of Grade DH36 structural higher strength metal plate to support prime contractors fulfilling DLA supply contracts for the Puget Sound Naval Shipyard in Bremerton. The scope of work requires the delivery of one physical steel plate measuring 2.5 by 60 by 240 inches, which must be rolled and normalized in accordance with MIL-S-22698C(2) and ABS rules. To qualify, the supplier must provide certified quality documentation and obtain an ABS Surveyor's endorsement. Additionally, the contractor is required to maintain a QSLD listing and complete a CMMC Level 2 self-assessment. This procurement is managed under the Department of Defense via the DLA Weapons Support Maritime Supply Chain.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

Monel Alloy Material SupplierThis subcontract, managed by the Department of Defense through the DDSP New Cumberland Facility, involves the procurement of certified Monel raw material billets or bars. The supplier is responsible for sourcing sea water grade Nickel-Copper alloy and providing comprehensive Mill Test Reports that certify the chemical composition and physical properties of the materials. Additionally, the supplier must guarantee that the material contains no intentional mercury or mercury-containing compounds in compliance with the Buy American Act. The contract falls under NAICS code 331110 and is intended to support prime contractors on DLA supply contracts. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

Supply of Grade 1117 Steel StockThis subcontract involves the supply of certified Grade 1117 steel stock to prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The required raw material must maintain a Brinell Hardness not exceeding 125 and must be delivered with accompanying Mill Test Reports to ensure quality and certification. Compliance with the Berry Amendment and the Buy American Act is mandatory, requiring all materials to be domestically sourced. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 331110. Responses to the solicitation are due by October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Raw Metal Stock SupplyThis subcontract involves the supply of raw metal stock for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supply Chain. The provider is responsible for delivering certified steel or alloy stock that strictly adheres to the material grades outlined in Drawing NR 19200 9377571 and NR 19200 12579607. All deliveries must be made directly to the fabricator and must be accompanied by material test reports and certifications of compliance to verify the metal grades. The opportunity is categorized under NAICS code 331110 and is associated with the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 2, 2026, for this procurement effort.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Supply of Certified Corrosion-Resistant Steel StockThis subcontract involves the supply of certified corrosion-resistant steel raw material bars or billets to support prime contractors for the DLA Weapons Support Nuclear Reactor Program. The materials must strictly adhere to the chemical and physical properties outlined in MS27769C and SAE AS4842. To ensure quality and safety, the provider is required to deliver Mill Test Reports certifying the material composition and confirming the absence of mercury and Class I ozone-depleting chemicals. Managed under the Department of Defense, the project is categorized under NAICS code 331110 with the place of performance located in San Diego, California. Interested parties should note the response deadline of November 2, 2026, for this procurement of certified raw steel stock.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 19 hours ago

DEADLINE

Supply of Raw Steel Stock for Axle FabricationThis subcontract involves the supply of raw steel bars or billets for axle fabrication to support prime contractors under the DLA Weapons Support Land Supply Chain. The selected provider is responsible for sourcing and cutting steel stock to precise dimensions and must provide Material Test Reports to ensure full metallurgical compliance. Performance for this contract will take place at Robins Air Force Base. A critical requirement of this agreement is strict adherence to the Buy American Act and the Berry Amendment, necessitating that all materials be domestically sourced. The contractor is tasked with delivering certified raw steel stock that meets all specified Department of Defense standards. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Supply of High-Strength Alloy Steel for Piston PinsThis subcontract involves the supply of high-strength raw alloy steel bar stock for prime contractors supporting DLA Weapons Support Land Supplier Opns Engines projects. The primary objective is to source and certify material that meets strict metallurgical specifications specifically for Caterpillar 7N9805 high-stress diesel engine piston pins. To ensure all chemical and physical properties align with critical application standards, the provider must deliver comprehensive Material Test Reports. The contract requires strict adherence to the Buy American Act and the Berry Amendment. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 331110. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 19 hours ago

DEADLINE

Supply of Raw Steel for Connecting LinksThis subcontract involves the supply of raw steel stock for prime contractors supporting the Department of Defense, specifically for DLA Weapons Support Land Supplier Operations Wheeled Vehicles projects. The primary objective is to source and certify steel that adheres to the precise grade and alloy requirements for NSN 3040-01-032-1463, ensuring all materials are delivered with mill certifications to maintain full traceability and technical compliance. The project falls under NAICS code 331110 and will be performed in New Cumberland. Interested parties should note the response deadline of November 2, 2026, for this procurement effort focused on providing critical raw materials for connecting links.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

about 19 hours ago

DEADLINE

Supply of Certified Metal Stock for Angle BracketsThis subcontract involves the supply of certified raw metal stock, including sheet, bar, or plate, to support prime contractors for the DLA Weapons Support Land Supply Chain. The scope specifically requires the delivery of certified metal alloys as defined in the technical data for NSN 5340-01-320-0949. To ensure quality and regulatory compliance, the provider must furnish material certifications and Mill Test Reports detailing the chemical and physical properties of the stock, while verifying the origin of materials to adhere to the Buy American Act and the Berry Amendment. The project is managed under NAICS code 331110 for the Department of Defense, with the place of performance located in Barstow, California. Interested parties must submit their responses by November 2, 2026, to meet the requirements of this procurement effort.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Flexible Cable SupplierThis subcontract involves the manufacture or procurement of three flexible cable units for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The cables must strictly adhere to NSN 5995-01-195-2776 and Part Number F172-PP-0265-A6 from Flexco Microwave Inc, with a requirement for rigorous quality assurance to ensure all technical specifications are met. Notably, any items produced via additive manufacturing must receive ESA approval prior to delivery. The project is categorized under NAICS code 334418 and requires the delivery of the three units to a designated shipping point in Tracy, California. Interested parties should note the response deadline of October 30, 2026, for this Department of Defense requirement.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 19 hours ago

DEADLINE

Spring Pin Supplier (NSN 5315-01-540-3445)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture or sourcing of two precision spring pins meeting NSN 5315-01-540-3445 specifications. The supplier must ensure all materials are mercury-free and adhere to strict quality assurance sampling standards per MIL-STD-1916 or ASQ H1331. Final products must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 for delivery to Yokosuka Naval Base, Japan. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, falling under NAICS code 332618.

Other Fabricated Wire Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

Defense-Compliant Packaging and Shipping ServicesThe Defense-Compliant Packaging and Shipping Services subcontract involves providing specialized packaging and preparation for prime contractors delivering hardware to DLA distribution facilities. The scope of work requires strict adherence to ASTM D3951 for packaging and MIL-STD-129 and the DLA Master List of Technical and Quality Requirements for marking and labeling. The contractor must utilize MIL-STD-129 compliant labeling systems to ensure all shipments are ready for FOB Origin transport. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the services will be performed in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 488410, with a response deadline set for October 30, 2026. The primary objective is to ensure that all hardware is properly processed and delivered to the DLA Distribution DDSP New Cumberland facility.

Motor Vehicle Towing

POSTED

about 19 hours ago

DEADLINE

Precision Manufacturing of Grooved, Headless PinsThis subcontract involves the precision manufacturing of 229 headless, grooved pins under NSN 5315011323568 for the DLA Weapons Support ASC Commodities Division. The project requires the use of CNC machining or specialized pin-forming equipment to meet NASM35677 and NASM20700 standards. Quality control must be maintained through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Eligible contractors must hold SAE AS9003 or ISO 9001 certification and ensure full compliance with the Buy American Act and Berry Amendment. The work is categorized under NAICS code 332721 and will be performed in New Cumberland. Responses for this requirement are due by October 30, 2026.

Precision Turned Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Hinge Pins (NSN 5315006331934)This subcontract involves the supply of precision-manufactured hinge pins, specifically NSN 5315006331934, to support prime contractors under the DLA Weapons Support ASC Commodities Division of the Department of Defense. The selected provider is responsible for manufacturing or sourcing the pins using precision machining equipment and ensuring all deliverables are transported to the designated DLA facility at Tinker AFB. Strict adherence to the DLA Master List of Technical and Quality Requirements and DFARS regulations is mandatory for this engagement. The opportunity falls under NAICS code 332510, with a response deadline set for October 30, 2026.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

Precision Flat Washer Manufacturing/SupplyThis subcontract involves the fabrication and supply of 75 precision flat washers, identified by NSN 5310-01-483-5528, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturer must adhere strictly to provided technical data, specifically excluding the use of additive manufacturing. Quality control requires the implementation of zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331, with packaging and labeling following RP001 and MIL-STD-2073-1E standards. The contractor is required to maintain JCP certification to handle ITAR and EAR regulated data and must provide necessary support for the source inspection of critical items. The final delivery of the 75 units is designated as FOB Origin, with the place of performance located in Tracy, California. This procurement falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310010978025)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture or sourcing of 11,484 flat washers identified by NSN 5310010978025. The selected provider will support prime contractors in fulfilling DLA supply contracts, with performance taking place in New Cumberland. To be eligible, contractors must possess a valid CAGE code and UEI, and the opportunity is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 332722. The contractor is responsible for strict adherence to DLA specifications, including packaging per RP001, physical identification marking per RQ017, and the removal of government identification per RQ011. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

Military-Spec Packaging and Shipping ServicesThis subcontract for Military-Spec Packaging and Shipping Services involves providing specialized packaging for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires packaging items, specifically bolts, in accordance with RP001 and MIL-STD-129, with DLA Master List requirements taking precedence over ASTM D3951. The contractor must utilize MIL-SPEC materials and labeling equipment to ensure all items are properly prepared and documented. Logistical responsibilities include coordinating FOB Origin shipments to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. The project falls under NAICS code 488510 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Close Tolerance Bolt FabricationThis subcontract for Close Tolerance Bolt Fabrication involves the production of 61 precision bolts for the DLA Weapons Support ASC Commodities Division. The manufacturer is required to use CNC equipment to meet NSN 5306013483463 specifications while strictly adhering to MIL-STD-1916 or ASQ H1331 sampling plans. Compliance with the Buy American Act and Berry Amendment is mandatory, and the use of additive manufacturing is expressly prohibited. The project is managed under NAICS code 332722 with performance taking place in Tracy, California. Interested parties must note the response deadline of October 30, 2026, for this Department of Defense requirement.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310011708539)This subcontract involves the manufacture or sourcing of 23 flat washers, identified by NSN 5310011708539, to support prime contractors on DLA supply contracts. The work is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed in New Cumberland. The contractor must ensure all items are packaged in strict accordance with RP001 DLA Packaging Requirements for Procurement and coordinate delivery through the First Destination Transportation program. Additionally, the provider is required to maintain an active SAM registration to facilitate invoicing via the Wide Area Workflow system.

Other Nonferrous Metal Foundries (except Die-Casting)

POSTED

about 19 hours ago

DEADLINE

First Article Test (FAT) SpecialistThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires a First Article Test Specialist to perform validation on wiring harness components for prime contractors. The scope of work involves conducting First Article Testing on one unit, specifically NSN 0001S0000053, utilizing electrical signal integrity equipment to ensure design and manufacturing quality meet strict government standards. The selected provider is responsible for delivering a comprehensive FAT Report and one validated test unit for government approval. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 19 hours ago

DEADLINE

Wiring Harness Supplier (NSN 6150-01-451-1108)This subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires the procurement of 15 units of wiring harness NSN 6150-01-451-1108. The selected supplier is responsible for manufacturing or sourcing components that strictly adhere to DoD specifications and ensuring all packaging complies with MIL-STD-2073-1E. The contract falls under NAICS code 335999 and requires the provider to maintain an active SAM registration. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 30, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS