Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Supply of Split Wired Grounding Pads (25-Pack)

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the supply of a 25-pack of split wired grounding pads designed for use during RF ablation procedures to ensure patient safety and proper current dispersion. It is issued as a subcontract under a Total Small Business Set-Aside, indicating that only small businesses are eligible to bid, as defined by the SBA and FAR 19.5. The North American Industry Classification System code 339113 classifies this as medical equipment and supplies manufacturing. The opportunity was posted on July 9, 2026, with a response deadline of July 31, 2026, at 7:00 PM. The place of performance is specified as Tucson, Arizona, with a zip code of 85723. The contracting agency is the Department of Veterans Affairs, specifically under the 262F Nco 22 Nonary VA Care (00262F) office.

General Info

25-pack grounding pads for RF ablation, small business set-aside, VA contract, Tucson, Arizona, response due July 31, 2026.

Agency

Department Of Veterans Affairs → 262F Nco 22 Nonary VA Care (00262F)View Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

Tucson, AZ, 85723, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → 262F Nco 22 Nonary VA Care (00262F)
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Veterans Affairs → 262F Nco 22 Nonary VA Care (00262F)
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of a 25-pack of split wired grounding pads used during RF ablation procedures for patient safety and current dispersion.

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
ADMINISTRATION SET, INTThe contract is for the procurement of administration sets, intravenous, selectable drip, identified by NSN 6515-01-652-5203, with a unit of issue of one package (PG) containing 48 units each. The item features a three-luer activated Y-site design with an 82-inch extension set that includes two luer-activated Y-sites, an extra pinch clamp, and a spin lock, and must be supplied sterile. The total quantity ordered is one package per line item, with multiple line items listed, all referencing the same NSN. Delivery is required within 20 days of order placement, with FOB destination terms placing full transportation responsibility and risk on the contractor until delivery at designated locations, including facilities in Omaha, Charlotte, Waco, and Rock Island Arsenal. Packaging must comply with RP001 DLA Packaging Requirements and Medical Marking Standard No. 1 (MMS No. 1), which supersedes MIL-STD-129 for all medical acquisitions; each unit must be sealed in a protective container and packed in commercial-grade shipping containers to ensure safe transit at the lowest cost. Marking must include the correct unit of issue and quantity, with all labeling conforming to MMS No. 1 guidelines, which can be accessed through DLA Troop Support. Electronic invoicing through WAWF is mandatory, and offers must be submitted via the DLA-BSM Internet Bid Board System by the response deadline of August 3, 2026. The solicitation incorporates multiple FAR and DFARS clauses related to cybersecurity, including NIST SP 800-171 compliance and mandatory reporting of cyber incidents within 72 hours, restrictions on procuring covered telecommunications equipment from prohibited vendors, protection of government work product, and whistleblower protections. Contractors must provide their Unique Entity ID and CAGE code and may be required to affirm size status and socioeconomic certifications if claiming small business or other status. The contract also includes stringent requirements for hazardous material handling, with Safety Data Sheets required and labeling governed by OSHA standards. All technical and quality requirements referenced by R or I numbers must align with the DLA Master List of Technical and Quality Requirements, which takes precedence over commercial standards like ASTM D3951. Payment terms include accelerated payments for small business subcontractors, and provisions prohibit unauthorized obligations and govern contract modifications. Performance will be inspected and accepted at the destination, with no prior inspection required. The
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
TRAINING AID, CHEST SEAThis training aid is designed for use with the HYFIN chest seal system, providing realistic practice for applying both vented and occlusive chest seals on human skin and training manikins. It replicates the exact template of the HYFIN vent chest seal but features a less aggressive adhesive to ensure reliable adhesion during training without compromising surface reuse or skin safety. The product enables proper training of wound preparation and seal placement, including the accurate positioning of the vent over a simulated injury. Each seal comes individually packaged with a gauze pad for cleaning the application site prior to use, and the product is latex free to accommodate users with sensitivities. The unit of issue is a package containing two seals, and the item is identified by NSN 6910-01-690-8679 with a purchase request quantity of 30 seals across five packages. The solicitation is issued under contract number SPE2DH-26-T-5565 by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 4, 2026, and a required delivery within five days of award. Bidders must specify the source and part number of the product being offered. Compliance with DLA technical and quality requirements, packaging standards, and procedures for removing government identification from non-accepted supplies is mandatory. The product will be delivered to Monroe, Louisiana, and inquiries should be directed to Tina Vu at the provided contact information. The NAICS code 339113 identifies the classification as medical equipment manufacturing, and the acquisition is governed by DLA’s master list of technical and quality requirements effective on the solicitation issue date.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CYLINDER, UNGRADUATED, LThe contract specifies the procurement of three ungraduated laboratory cylinders, each with a capacity of 600 milliliters, constructed from borosilicate glass, featuring an outer diameter of 51 millimeters and an internal height of 360 millimeters. The item is identified by NSN 6640-01-459-4425 and is to be delivered within 20 days of award under purchase request 7017665906. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA procurement standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation number is SPE2DH-26-T-5598, issued on July 28, 2026, with responses due by August 4, 2026. The contracting activity falls under the Department of Defense’s Medical Supply Chain FSH, with performance to be delivered to FPO, ZIP 96632. Tina Vu of DLA serves as the primary point of contact, reachable via email and phone listed in the documentation. The NAICS code 339113 confirms the classification for laboratory glassware manufacturing.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
GLOVE, PATIENT EXAMININThe contract specifies the procurement of 2 packages of 100-pair units each of black, small-sized nitrile rubber patient examination gloves, featuring a micro-roughened finish and beaded cuff for improved grip and donning ease. The gloves are ambidextrous, powder-free, and non-sterile, designed for single-use only in medical examination and treatment settings. The items fall under NSN 6515-01-515-0195 with a delivery requirement of 20 days after award. All bids must identify the source and part number being supplied, and compliance with DLA packaging and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements is mandatory. The solicitation, identified as SPE2DS-26-T-281M, was posted on July 28, 2026, with responses due by August 3, 2026, and is classified under NAICS code 339113 for medical device manufacturing. The order is placed by the Department of Defense, Medical Supply Chain MD Surg FSF, with performance located in Austin, Texas.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
TEST STRIPS, GLUCOSEThe contract specifies the procurement of Prodigy Autocode Blood Glucose Test Strips, designed for use with all Prodigy pocket meters and featuring no-coding technology that eliminates manual calibration. Utilizing oxidase technology instead of GDH-PQQ, the strips offer safer and more accurate glucose measurements with automatic capillary action drawing the blood sample into the strip. These strips are approved for alternate site testing and are packaged in boxes of 50, with the unit of issue designated as BX. The product must comply with stringent medical packaging and labeling standards, including adherence to Medical Marking Standard No. 1, replacing all references to MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe delivery via common carrier at the lowest cost to the specified delivery point in Kings Bay, Georgia. The strips must have a non-extendable shelf life of 24 months, with no more than three months elapsed between the date of manufacture and the date of delivery to the government. Labels must clearly indicate the date of manufacture, expiration or retest date, and the contract or lot number, following the latest revision of MMS1C. The solicitation number is SPE2DS-26-T-278Q, with a response deadline of August 3, 2026, and a required delivery within 20 days after award. The NSN is 6550-01-680-9339, and bidders must provide the source and part number being supplied. The acquisition falls under NAICS code 339113 for medical device manufacturing and is managed by the Department of Defense, with technical and quality requirements incorporated from the DLA Master List. Covered defense information may apply, and all packaging must meet DLA requirements, including the removal of government identification from non-accepted supplies.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
SKIN CLOSURE, ADHESIVE,This contract specifies the procurement of sterile adhesive skin closure strips measuring 3 inches by 1/4 inch, supplied in quantities of 200 units per package, with four boxes per package, totaling 3 packages. Each unit must be sealed in a commercial-grade container that ensures protection from damage, and all shipping containers must be suitable for safe delivery via common carrier at the lowest cost to the designated delivery point at Fort Bragg, North Carolina. The product must have a minimum shelf life of 24 months from the manufacturer’s date, with no more than three months elapsed between manufacturing and government delivery. Labeling requirements mandate clear markings for the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item is designated as a Type I (Code M) shelf-life item under RS016, and its shelf life is non-extendable. All packaging, labeling, and marking must adhere to DLA’s packaging and medical marking standards, including the removal of government identification from non-accepted supplies. The solicitation number is SPE2DS-26-T-278D, with a response deadline of August 3, 2026, and a delivery requirement within 20 days of award. Bidders must identify the source and part number being offered, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. The item is classified under NSN 6510-01-365-2077 and NAICS code 339113, and the procurement falls under federal acquisition protocols. The point of contact for inquiries is Anh Lam of the Department of Defense, Medical Supply Chain, and all documentation must reflect the most current standards specified by DLA Troop Support.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
INDICATOR, STERILIZAThe product is a steam biological indicator designed for rapid and reliable monitoring of sterilization processes at 270°F and 275°F using gravity-displacement steam sterilizers. It features a self-contained design with a super rapid readout capability of just 50 seconds when used with the 3M Attest Auto-Reader 490, making it suitable for both qualification testing and routine monitoring. Storage should be maintained under normal room conditions between 49°F and 86°F, and it must not be stored near sterilants or other chemicals to ensure integrity. Each unit of issue is a box containing fifty indicators. The item is identified by NSN 6530-01-654-3553, with a purchase request for three boxes and a delivery requirement within five days of award. The solicitation is issued under contract number SPE2DH-26-T-5574, with a response deadline of August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH through the DLA. Bidders must specify the source and part number supplied, and the acquisition is subject to applicable technical, quality, and packaging requirements as defined in the DLA Master List of Technical and Quality Requirements. The contract includes provisions for removal of government identification from non-accepted supplies and applies covered defense information protocols. The place of performance is in Suffolk, Virginia, with Tina Vu listed as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
WATER QUALITY ANALYSISThe Water Quality Analysis Set is a compact, portable laboratory solution designed to monitor critical water quality parameters including chlorine levels from 0 to 3.4 mg/L and nitrates from 0 to 40 mg/L, along with presence-absence detection of total coliforms and E. coli. The set includes all necessary reagents for chemical testing, a portable incubator, a thermometer, a pocket-style pH and TDS tester, and required glassware, making it suitable for field use in remote or resource-limited environments. All components must have a minimum shelf life of 12 months, with no more than two months elapsed from the date of manufacture to the date of delivery to the government. Labels on all items must clearly display the NSN, manufacturer, CAGE code, date of manufacture, expiration or retest date, contract number, and lot number to ensure traceability and compliance. The contract is for one unit with NSN 6630-01-641-1591, under solicitation SPE2DH-26-T-5603, issued by the Department of Defense through the Medical Supply Chain FSH, with delivery required within 20 days of award to APO 09094-3219. Bidders must provide the specific source and part number being offered for submission.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SKIN CLOSURE, ADHESIVE,The contract specifies the procurement of 4 units of surgical adhesive skin closure strips, each unit consisting of 300 sterile strips measuring 0.50 inches by 4 inches, with porous backing options including polypropylene film or nonwoven nylon fabric, packaged in fifty envelopes per box. The product must have a minimum shelf life of 36 months, and no more than five months may have passed from the manufacturer’s production date to the delivery date to the government. The item is identified by NSN 6510-00-054-7254 and is subject to technical and quality requirements referenced in the DLA Master List, as well as DLA packaging standards and procedures for removal of government identification from non-accepted supplies. The solicitation, issued under SPE2DS-26-T-278Z, was posted on July 28, 2026, with a response deadline of August 3, 2026, and requires delivery within 48 days of award to the performance location in APO 96260-5479. The contracting agency is the Department of Defense’s Medical Supply Chain, with Tiffany Parker listed as the primary point of contact for inquiries.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
TEST LUNG, VENTILATORThe contract pertains to the procurement of a 1-liter test lung device specifically designed for use with IMPACT and ZOLL ventilator series 731 and 754M models, serving as a calibration tool within the broader ventilator calibration kit identified by NSN 6515-01-606-1476. The item is sold individually with a unit of issue of each and must comply with DLA packaging requirements for procurement. Technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, are fully incorporated and binding. Bidders are required to clearly state the source and part number being supplied and must adhere to the regulation mandating removal of government identification from non-accepted supplies. The product is listed under NSN 6515-01-608-7696 with a single unit requested under purchase request 7017631835 and must be delivered within 20 days of award. The solicitation number is SPE2DS-26-T-278E, issued on July 28, 2026, with responses due by August 3, 2026, under NAICS code 339113 for medical equipment manufacturing. The awarding agency is the Department of Defense, through the Medical Supply Chain MD Surg FSF, with delivery performance required at Travis Air Force Base, CA 94535-1825. Primary point of contact for inquiries is Aidan Martz, reachable via email and phone provided.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
LITTER, RIGID, SEA-AIR, MThe contract specifies the procurement of two rigid sea-air medical evacuation litters, identified by NSN 6530-01-187-0104, each measuring 80 inches in length and 16.5 inches in width. The litters must feature a stainless steel or corrosion-resistant metal frame with a cloth stretcher and include a urethane-coated carrying case, designed to be foldable in half, hoisted vertically or horizontally, and backpacked without the use of hands for transport into confined spaces. The units must be orange in color and meet strict material requirements, prohibiting the intentional addition of mercury or mercury-containing compounds except for specific functional uses such as batteries, fluorescent lamps, sensors, controls, weapon systems, or chemical reagents as specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment boundary in compliance with NAVSEA 5100-003D. Packaging must adhere to DLA packaging requirements, and all supplies must be free of government identification if not accepted. The solicitation number is SPE2DS-26-T-281Q, with a response deadline of August 3, 2026, and a required delivery within five days of award. The purchasing agency is the Department of Defense under the Medical Supply Chain MD Surg FSF, with performance located in Suffolk, Virginia, and point of contact Lisa Thomas-Wright. Bidders must specify the source and part number being supplied.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
TEST KIT, FECAL RAPIDThe test kit is a rapid fecal diagnostic tool designed for the qualitative detection of Entamoeba histolytica pathogens in human stool specimens, specifically for patients exhibiting symptoms of diarrhea or dysentery. It utilizes a membrane enzyme immunoassay in a single-use cassette format to identify the organism’s adherin, delivering results within 30 minutes without the need for specialized instrumentation. The kit has an analytical sensitivity of 0.2 ng/mL and is intended for use in clinical settings requiring swift diagnosis. Each package contains 25 tests and must be stored under refrigeration between 2 to 8 degrees Celsius; freezing is prohibited. The product has a non-extendable shelf life of 12 months from manufacture, and no more than one month may have elapsed from the date of manufacture to the date of delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with Medical Marking Standard No. 1. Packaging must meet commercial standards ensuring protection from damage and safe transport via common carrier, with exterior containers suitable for shipping and export if required. The item is governed by DLA technical and quality requirements, packaging standards, and defense information protocols. The NSN is 6550-01-671-9115, with a purchase request quantity of one package, slated for delivery within 20 days to Fort Bliss, Texas, under solicitation SPE2DS-26-T-278B, issued by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Veterans Affairs → 262F Nco 22 Nonary VA Care (00262F)

Same awarding agency

NAICS: 325413
New
Federal
GLA VA - 10X Genomics Visium HD kit - Genomics Reagents
In-Vitro Diagnostic Substance Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 20 days
View Details
NAICS: 339113
New
Federal
HDMI Control Module and Inspection Scopes for Albuquerque VAThe U.S. Department of Veterans Affairs is seeking quotations for the procurement of Pure-Processing brand HDMI Control Modules and Inspection Scopes under solicitation number 36C26226Q1253, with a firm-fixed price contract structure. Only the specified Pure-Processing brand items are acceptable—no substitutes or equal products will be considered. The equipment is intended for use at the Raymond G. Murphy VA Medical Center in Albuquerque, New Mexico, and the solicitation is issued to a single vendor to fulfill the requirement for all necessary units. Respondents must provide detailed vendor information including business size, socioeconomic category, UEI number, and an authorized distributor letter confirming their authority to supply the branded products. All quotes must include item pricing, lead time, shipping charges, and explicit confirmation that only the required Pure-Processing brand items can be supplied. The response deadline is August 17, 2026, at 3:00 PM ET, and the contract will be awarded based on compliance with brand exclusivity, pricing, and delivery capabilities. The solicitation is categorized under NAICS code 339113 and does not include a set-aside provision. Point of contact for inquiries is Sabrina Schofield, with the issuing office based in Long Beach, California, while performance is solely at the Albuquerque facility.
Surgical Appliance and Supplies Manufacturing

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 339113
Federal
Supply of Generator Output Test PlugThe contract is for the supply of a compatible test plug designed to verify the output functionality of the GX1 radiofrequency generator before it is used in clinical settings. This component is essential for ensuring the device operates safely and accurately, serving as a critical pre-use check in medical environments. The requirement is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to compete, and it falls under the NAICS code 339113 for medical equipment and supplies manufacturing. The solicitation was posted on July 9, 2026, with responses due by July 31, 2026, allowing vendors a limited timeframe to submit proposals. The place of performance is located in Tucson, Arizona, with a zip code of 85723, indicating where the delivered test plugs must be shipped or made available for use. The contracting activity originates from the Department of Veterans Affairs, specifically under the 262F Nco 22 Nonary VA Care office, and the equipment will support clinical operations within the VA healthcare system. While no specific point of contact is listed, interested parties can access further details through the official SAM.gov workspace link provided. The focus is on acquiring a reliable, compatible, and clinically validated test plug to maintain operational integrity of the GX1 generator without substituting or modifying the primary device.
Surgical Appliance and Supplies Manufacturing

POSTED

20 days ago

DEADLINE

in 2 days
View Details
NAICS: 339112
Federal
Supply of Radiofrequency Generator (GX1 Model or Equivalent)The contract is for the supply of one new, unused radiofrequency generator system designed for ablation procedures, specifically the GX1 Model or an equivalent that meets all specified technical requirements. The system must feature four output channels, a touchscreen interface, CQM capability, and an aluminum chassis to ensure performance, usability, and durability in clinical environments. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to bid, in accordance with FAR 19.5. The NAICS code 339112 confirms the classification under Medical Equipment and Supplies Manufacturing. The solicitation was posted on July 9, 2026, with a response deadline of July 31, 2026, at 7:00 PM. The place of performance is Tucson, Arizona, with a ZIP code of 85723, and the contracting activity is under the Department of Veterans Affairs, specifically the 262F Nco 22 Nonary VA Care office. The procurement is part of the VA’s effort to modernize medical equipment for patient care, and the selected vendor will be responsible for delivery of a fully compliant, factory-new unit meeting all technical specifications without exceptions or deviations.
Surgical and Medical Instrument Manufacturing

POSTED

20 days ago

DEADLINE

in 2 days
View Details
NAICS: 339113
Federal
RFA GENERATORThe Department of Veterans Affairs through the NCO 22 Contracting Activity is soliciting quotes for the RFG-X1-120V GX1 Radiofrequency Generator Kit or an equivalent product to be used at the Tucson VA facility. The preference is for the exact model to ensure compatibility with the existing clinical infrastructure, and any proposed equivalent must fully meet all specified salient characteristics and integrate without disruption. Proposals must include detailed, itemized pricing covering the base system, installation, training, warranty, extended support, and optional components. Response timelines must outline the estimated lead time from contract award through delivery and installation. All bidders are required to provide their contract vehicle information such as GSA or FSS contract numbers along with their UEI number, CAGE code, and business size classification under the Small Business Administration total small business set-aside criteria. The solicitation falls under NAICS code 339113 and is managed by the Office of the Department of Veterans Affairs located in Long Beach, California, with performance required in Tucson, Arizona. All submissions are due by July 31, 2026, and must be directed to Sabrina Schofield at sabrina.schofield@va.gov; letters of authorization should be included if applicable.
Surgical Appliance and Supplies Manufacturing

POSTED

20 days ago

DEADLINE

in 2 days
View Details