This Solicitation opportunity from Government of Canada was posted on January 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SUPPLY OF STEEL PLATE GIRDERS ON PTH 3 OVER THE MORRIS RIVER

Closed

7677International

Submission Closed02/05/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331221

New

DIBBS

Supply of Raw Materials and Metal ComponentsThe contract calls for the supply of traceable raw materials including sheet metal, tubing, and gaskets required to fabricate military HVAC duct assemblies, ensuring full compliance with DFARS regulations and applicable material specifications. All materials must be sourced and documented to maintain strict traceability throughout the supply chain, meeting the Department of Defense’s stringent quality and provenance standards for defense-related components. The materials are intended for use in critical military environments, necessitating adherence to exacting performance, durability, and safety criteria. This is a subcontract opportunity posted on July 23, 2026, with a response deadline of August 26, 2026. It falls under NAICS code 331221, which classifies the industry as rolled metal shape manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. There is no set-aside designation specified, and the place of performance details are not provided, but contract performance is expected to support U.S. military HVAC system fabrication. Interested parties must submit proposals through the DIBBS portal using the provided solicitation reference before the deadline.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

BAR,METALThis contract specifies the procurement of metal bars for use in a critical shipboard system, designated as SPECIAL EMPHASIS material due to the high risk of catastrophic failure if defective or incorrect components are installed. The material must conform to ASTM-A193 Grade B16 and ASTM-A962 standards, with precise dimensional requirements including a diameter of 1 3/4 inches and lengths between 5 and 12 feet, depending on diameter. Supplementary requirements mandate magnetic particle inspection for each bar and macroetch testing once per heat, with strict acceptance criteria for surface discontinuities. Traceability is mandatory from raw material through final delivery, requiring unique heat-lot markings on every item and certification reports that must be directly linked to these markings. The contractor must maintain a quality system aligned with ISO-9001, ISO-10012, and ISO/IEC 17025, or an approved military alternative, and all inspections and certifications must be fully documented and available for government audit. Delivery is subject to a 365-day timeline, with early or incremental shipments permitted at no additional cost. The total contract quantity is 600 units, with a permitted variance of up to 5% below the total. All certification data, including test results and compliance certificates, must be submitted via WAWF to Portsmouth Naval Shipyard for review and acceptance before any shipment, with strict routing instructions for shipment, inspection, and acceptance codes. The government will perform final inspection and acceptance at destination without prior source inspection. The procurement is issued under Emergency Acquisition Flexibilities and includes a 45-day prompt payment term, extended from the standard seven. The contract prohibits mercury in any form and requires strict configuration control, formal Engineering Change Proposals for any design modifications, and prohibits unapproved waivers or deviations, all of which must be submitted through the ECDS system. All documentation, including material certifications, must be positive and unqualified, with no disclaimers permitted, and nonconforming material will be rejected.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

High-Strength Structural Steel Plate Supply (Grade DH36)The contract calls for the supply of structural steel plates measuring 0.375 inches thick and 60 by 240 inches in dimensions, manufactured to Grade DH36 standards in accordance with ABS rules, ensuring high strength and durability for demanding structural applications. Each plate must be accompanied by full mill certification and must comply with applicable military specifications, verifying material integrity, traceability, and performance under operational conditions. The delivery location is specified as New Cumberland, Pennsylvania, with the place of performance tied to the DDSP New Cumberland Facility under the Department of Defense. The solicitation, posted on July 22, 2026, requires proposals to be submitted by August 3, 2026, and is classified as a subcontract under NAICS code 331221 for rolled structural metal product manufacturing. The contract is managed without any set-aside designation, opening participation to all qualified vendors. Bidders must ensure alignment with military-grade requirements and certified material documentation to meet the stringent quality and compliance standards expected by the Defense Logistics Agency. All responses must be submitted through the designated DIBBS platform using the provided solicitation number.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Hot-Rolled Carbon Steel Plate SupplyThe contract calls for the supply of hot-rolled carbon steel plates with a thickness of 0.250 inches and dimensions of 48 inches by 96 inches, offered in whole-foot lengths to meet precise dimensional requirements without the need for test coupons. These plates are intended for structural applications and must comply with strict specifications to ensure compatibility and performance in demanding environments. The procurement is structured as a subcontract under NAICS code 331221, indicating classification within the rolling and finishing of steel mills sector, and is managed by the Department of Defense through its Construction and Equipment MRO SVC I organization. Performance of the contract is designated for Tinker Air Force Base, Oklahoma, with a ZIP code of 73145-8000, specifying the physical location where the materials will be delivered and utilized. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, with the complete details accessible via the DIBBS platform at the provided URL.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Raw Materials (Alloy Steel or Specialty Metals)The contract seeks the supply of high-grade alloy steel or corrosion-resistant materials specifically for the production of close tolerance screws, with strict adherence to NAS and military material specifications. These materials must meet rigorous quality and performance standards to ensure reliability in defense and aerospace applications. The solicitation is issued as a subcontract under the NAICS code 331221, and the materials are expected to be delivered to the place of performance in Cherry Point, North Carolina, with the zip code 28533-5040. The offering is managed by the ASC Commodities Division of the Department of Defense, indicating this is part of a critical supply chain supporting national defense infrastructure. Interested parties must submit responses no later than July 30, 2026, with the solicitation posted on July 22, 2026. There is no set-aside designation specified, meaning all eligible suppliers may compete without restrictions based on business size or ownership. The contract does not provide a point of contact, requiring vendors to use the provided DIBBS link for full solicitation details and submission procedures. Compliance with material specifications and delivery timelines will be essential, as these components are integral to high-precision assemblies where failure is not an option.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

High-Strength Steel Plate Manufacturing and SupplyThe contract specifies the manufacture and supply of 22 units of quenched and tempered steel plates, Grade B, with a thickness of 0.250 inches, compliant with ASTM A514/A514M-22 and SAE AMS2807C technical standards. Each plate must be permanently marked in accordance with MIL-STD-129 and accompanied by full certification confirming adherence to all material and processing requirements. The work is solicited as a subcontract under the NAICS code 331221, and the performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The offer deadline is August 3, 2026, and the opportunity was posted on July 22, 2026, with the responsible agency identified as the Department of Defense through its DDSP New Cumberland Facility. All deliverables must meet stringent military and industrial specifications to ensure operational reliability and traceability.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Stainless Steel Plate SupplyThe contract is for the supply of stainless steel metal plates in Grade 304, hot rolled and annealed, with a thickness of 0.375 inches and dimensions of 36 inches by 96 inches, to be used for defense logistics purposes. These plates are specified as a physical commodity and must meet exact material and dimensional requirements to ensure compatibility with military equipment and systems. The solicitation is issued under a subcontract arrangement with the NAICS code 331221, indicating classification within the primary metal manufacturing sector, specifically for rolled metal product manufacturing. The contract was posted on July 22, 2026, with a response deadline of August 3, 2026, providing interested suppliers with approximately two weeks to submit bids. Performance of the contract will occur at the New Cumberland facility located in ZIP code 17070-5002, under the oversight of the Department of Defense via the DDSP New Cumberland Facility. The procurement is not subject to any set-aside designation, meaning it is open to all eligible vendors regardless of business size or status. Interested parties must submit their responses through the DIBBS system using the provided link to participate in the procurement process.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Corrosion-Resistant Steel Sheet Fabrication & SupplyThe contract calls for the manufacture and delivery of seven sheets of cold-rolled steel with a composition of 630, solution heat treated, to meet stringent material specifications including SAE AMS5604K, ASTM A700-14, and MIL-STD-129R. These standards ensure the steel possesses the required mechanical properties, surface quality, and corrosion resistance for high-performance applications within defense and aerospace environments. The material must be produced and certified to comply with all technical requirements for chemical composition, heat treatment, dimensional tolerances, and packaging as outlined in the referenced specifications. The contract is classified as a subcontract under NAICS code 331221, indicating it pertains to rolling and finishing of steel. It was posted on July 22, 2026, with a response deadline of August 3, 2026, and the place of performance is designated as San Diego, California, with a specific zip code of 92136-3581. The contracting organization is the Department of Defense through its San Diego office, indicating the end use of the material is for defense-related purposes. While no point of contact or solicitation number is provided, the official portal for submission and information is accessible via the DIBBS website link provided.

POSTED

DEADLINE

SHEET, METALThe contract calls for 7 sheets of corrosion-resistant cold-rolled steel, solution heat treated to Composition 630, with a thickness of 0.0630 inches, width of 36.0 inches, and length of exactly 10 feet per sheet—no test coupons or deviations in dimensions are permitted. All material must be supplied in whole-foot increments and meet precise specification standards as defined by SAE AMS5604K, MIL-STD-129R, ASTM A700-14, and SAE AMS2807C. Each sheet requires continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions, applied via stamping or stenciling using noncontaminating, waterproof ink visible to the unaided eye. Adhesive labels are mandatory for units under 0.250 inches in nominal thickness, and no sheet will be accepted without full compliance. A Certificate of Quality Compliance, or mill certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must adhere to MIL-STD-2073-1E, with special preservation code ZZ per ASTM A700, and palletization in accordance with DLA packaging requirements. Labeling and marking must also conform to MIL-STD-129, and when multiple units are specified, both must be indicated on the shipment. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and non-compliant offers must explicitly state deviations—failure to comply may result in rejection of the product or criminal penalties. The delivery point is FOB origin, with inspection and acceptance at destination, and the original required delivery date is November 26, 2026, with a contract delivery date of 167 days after award. The contract is governed by DLA’s Master List of Technical and Quality Requirements, and no source inspection is required for qualified suppliers under the QSL program.

POSTED

DEADLINE

PLATE, METALThis contract specifies the procurement of a steel structural plate measuring 0.750 inches thick, 96 inches wide, and 240 inches long, weighing approximately 3570 pounds per unit, manufactured to Grade DH36, normalized, in compliance with American Bureau of Shipping (ABS) rules for steel vessels. The material must be produced by an approved steel mill and marked with the letters "AB" per MIL-S-22698 requirements. Absolute compliance with ABS standards is mandatory, with no substitutions permitted. All material must be accompanied by a Certificate of Quality Compliance and a metal certification, both of which must be submitted with each shipment and forwarded to the DLA Contracting Officer. The plate must be delivered in whole-foot increments and marked with specific information including the DLA contract number, NSN, specification revision, grade, manufacturer details, heat and lot numbers, and dimensions using permissible methods such as stenciling or stamping—adhesive labels are required for smaller bars and tubes. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support, and any deviation from this requirement invalidates the bid unless explicitly noted. Mercury or mercury-containing compounds are prohibited from intentional addition or contact with the delivered hardware, except in functional applications such as batteries or fluorescent lamps, which must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E and RP001 standards, with preservation and marking following ASTM A700 and MIL-STD-129R. Each shipment must be marked with dual unit quantities when applicable, and all items must be protected from physical damage during transit using approved cushioning and bracing materials. Delivery is FOB origin with a 167-day lead time to the DDSP New Cumberland Facility in Pennsylvania. The contract is a total small business set-aside under NAICS code 331221, and acceptance occurs at the destination point without source inspection waived for qualified suppliers.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

PLATE, METALThe contract specifies the procurement of a steel plate measuring 0.250 inches thick, 48 inches wide, and 96 inches long, weighing approximately 326 pounds per piece, manufactured to Grade B and processed via quenching and tempering in accordance with ASTM A514/A514M-22 and SAE AMS2807C standards. Each unit must be identified with continuous markings including the DLA contract delivery order number, NSN, specification number and revision, grade, class, type, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and exact dimensions, using either stamping or stenciling methods that ensure legibility, durability, and resistance to contamination or degradation. The material must be supplied in whole-foot lengths only and accompanied by a Certificate of Quality Compliance with every shipment, submitted to both the end customer and the DLA Troop Support Contracting Officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and any deviation from this requirement constitutes a non-compliant bid. Packaging and labeling must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with special preservation code ZZ as defined by ASTM A700, and all items must be palletized and protected against physical and mechanical damage during transit. The delivery is FOB origin, with exact quantity fixed at 22 pieces, no variance allowed, and the required delivery date is November 30, 2026, with a 167-day lead time. Inspection and acceptance occur at destination, and all documentation, including CDRLs and technical data, must be reviewed under the DLA Master List of Technical and Quality Requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

PLATE, METALThis contract specifies the procurement of steel structural carbon hot rolled plate measuring 0.250 inches thick, 48 inches wide, and 96 inches long, with a reference weight of 326.7 pounds per unit. All material must strictly conform to exact dimensions with no test coupons permitted, and must be supplied in whole-foot lengths only. A Certificate of Quality Compliance, or Mill-Material Certification, is required with every shipment and must be forwarded to the DLA Troop Support Contracting Officer. Each unit must be permanently marked with mandatory identification details including the DLA contract delivery order number, NSN, specification revision, grade, alloy, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stamping or stenciling that are legible, waterproof, and non-contaminating. Adhesive labels are required for smaller bars and tubes under 0.250 inches in nominal diameter, and tags are acceptable for wires. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129R, with preservation methods aligned to ASTM A700, and palletization compliant with DLA packaging requirements. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and deviations from this requirement must be explicitly declared; non-compliance may be treated as an unauthorized substitution with potential criminal penalties. The material must meet ASTM A36/A36M-19, ASTM A6/A6M-24B, SAE AMS2807C, and MIL-STD-129R standards, with technical data packages and CDRL-METALSCERT documentation governing compliance. Two delivery lines are specified—11 units to Tinker AFB, Oklahoma, and 33 units to Tracy, California—with a 56-day delivery window and zero quantity variance allowed. Acceptance occurs at destination, and failure to meet any requirement may result in rejection.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

4 days ago

DEADLINE

in 8 days

AI Contract Overview

This contract involves the supply, fabrication, and delivery of structural steel plate girders and associated steel components for a single-span bridge located on PTH 3 over the Morris River in the Rural Municipality of Macdonald. The work includes providing 228,862 kilograms of structural steel, surface preparation and painting of the steel in a lump-sum arrangement, and conducting four audit and quality assurance inspections. Issued by Manitoba Transportation and Infrastructure under the Government of Canada, this solicitation is identified by the number 7677 and was posted on January 22, 2026. Interested parties must submit their responses by February 5, 2026. Bidding documents are accessible via the Merx platform, with associated fees potentially applying. The designated contracting authority for this project is Paige Brown, who can be contacted via email or phone for further inquiries.

General Info

Supply, fabrication, and delivery of 228,862 kg steel girders for PTH 3 bridge, including painting and inspections.

Agency

Government of Canada → Manitoba Transportation and Infrastructure - Tendering and Contracts

NAICS

331221 - Rolled Steel Shape ManufacturingView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJan 22

Solicitation

Response DeadlineFeb 5

Deadline has passed

Submission Closed

02/05/2026, 06:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Manitoba Transportation and Infrastructure - Tendering and Contracts

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Manitoba Transportation and Infrastructure - Tendering and Contracts

Office AddressN/A

Contacts

Paige BrownContracting Authority

contact@example.gov

+1 (555) 000-0000

Full Description

Supply of Structural Steel Plate Girders and associated structural steel for a single span bridge on PTH 3 over the Morris River, located in the Rural Municipality of Macdonald. code : 5999description : Supply, Fabrication and Delivery of Structural Steelquantity : 228862unitOfMeasure : Kilogramcode : 5593description : Surface Prep & Painting of Struct Steelquantity : 1unitOfMeasure : Lump-Sumcode : 7000description : Audit & Quality Assurancequantity : 4unitOfMeasure : EachBidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.