Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Subcontract opportunity from Department Of Defense was posted on March 31, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Supply of Straight Line Rip Saw (Industrial Machinery)

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333243
New
SLED
10-IFB- 2450499157 -YB-Helene Mitigation Brush Chippers
Solicitation # 10-IFB-2450499157 -YB
The North Carolina Department of Agriculture and Consumer Services, specifically NC Forest Services, is soliciting bids for the purchase of brush chippers to support the Helene mitigation program. These units are intended for use by mitigation crews and forest service employees to reduce fuel loads and assist in wildfire reduction around structures in affected areas. The required equipment must feature a gas engine, a 45-gallon fuel tank, and the capacity to handle material up to 15 inches in diameter. All equipment must comply with OSHA standards and state and federal clean air and water pollution regulations, with gas-operated assemblies requiring approval from recognized safety standard organizations such as the American Gas Association. Bids will be evaluated based on completeness, content, cost, and the vendor's responsibility, with the award granted to the bid deemed most advantageous and representing the best value to the State. Vendors must provide a pricing form, customer references, a certification of financial condition, and other required documentation via the NC eProcurement Sourcing Tool. Delivery is specified as Free-On-Board Destination to the NC Forest Service in Morganton, North Carolina. Payment is contingent upon a successful inspection and acceptance of the goods by the State's Contract Manager. Bids must be signed electronically and submitted by November 26, 2026.
Department of Agriculture

POSTED

about 15 hours ago

DEADLINE

in 14 days
NAICS: 333243
Small Continuous Kraft Digester
Solicitation # 1241
The Center for Research and Advancement of Fiber Products Technologies (CRAFT), through the Department of Energy and ORNL UT-Battelle LLC, is issuing a Request for Interest for a laboratory-scale digester. The required system must accurately simulate continuous Kraft pulping conditions to evaluate cooking chemistry, process performance, and pulp yield, with a specific technical requirement to reliably detect yield changes of approximately 1%. The equipment must offer programmable control over temperature, pressure, residence time, alkali concentration, and liquor-to-wood ratio, utilizing either chip movement or a stationary wood-chip bed with circulated liquor. The final system will be delivered and installed at ORNL facilities in Oak Ridge, Tennessee. This sources-sought notice is for market research and does not constitute a commitment to purchase, though any future contract is anticipated to be firm-fixed-price under NAICS code 333243. Interested providers must submit their responses by October 16, 2026, to Procurement Manager Tess Klatt. Submissions must include a survey of abilities covering Ariba Supplier Portal registration, US Government debarment status, and a three-year history of safety and environmental compliance. Technical responses should detail equipment specifications, performance data regarding repeatability, estimated costs, delivery schedules, and a reference list of relevant project experience.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 2 months ago

DEADLINE

N/A

AI Contract Overview

Show more

The Department of Defense, through DLA Distribution, is seeking a subcontractor for the procurement of one new straight line rip saw, specifically a Diehl model SL65-56 or an equivalent alternative. The scope of the contract includes the delivery of the machinery along with all necessary components, controls, safety guards, and comprehensive manufacturer documentation. Performance for this contract will take place in Albany. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 333243. The solicitation was posted on March 31, 2026, and requires a response by April 9, 2026, at 6:00 PM.

General Info

NAICS

333243 - Sawmill, Woodworking, and Paper Machinery Manufacturing

Place of Performance

Albany, GA, 31704, USA

Set-Aside

SBA

Documents

This scope was carved out of SP330026Q0099.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DDAG Straight line Rip Saw

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • 10-IFB- 2450499157 -YB-Helene Mitigation Brush ChippersOpen now, due in 14 days
  • 36--NRP,SHREDDING MACHIOpen now, due in 10 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Distribution
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Procurement of one new straight line rip saw (Diehl model SL65-56 or equivalent), including all components, controls, safety guards, and manufacturer documentation.

More opportunities from Department Of Defense → DLA Distribution

Same awarding agency

NAICS: 541380
New
Federal
Cross Connection Hazard Assessment
Solicitation # SP330027Q0011
Solicitation SP330027Q0011 is a 100% Small Business Set-Aside for a comprehensive Initial Cross-Connection Hazard Assessment of the potable water system at DLA Distribution San Joaquin in Tracy, California. The scope of work requires a baseline survey of a groundwater source, an elevated storage tank, the campus-wide distribution system, and the interior and exterior of 43 buildings. The contractor must identify actual and potential cross-connections, determine hazard degrees, and evaluate the adequacy of existing backflow prevention assemblies in accordance with TB MED 576, the Uniform Plumbing Code, and military public health guidelines. Key deliverables include a detailed cross-connection inventory database, a draft assessment report, and a final report featuring a prioritized mitigation plan. The period of performance is scheduled from December 14, 2026, through June 14, 2027. Award will be granted to the responsible quoter with the lowest evaluated price who is deemed technically acceptable based on technical capability and past performance. Quotes must be submitted electronically by December 7, 2026, as three separate files covering technical capability, past performance, and pricing. The contract is a firm-fixed-price effort requiring compliance with various FAR and DFARS clauses, including Service Contract Labor Standards and specific cybersecurity and security awareness training requirements. Invoicing shall be processed electronically through the Wide Area Workflow system.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 238210
New
Federal
Electric Power Resiliency Building 56
Solicitation # SP330027Q0012
Solicitation SP330027Q0012 is a small business set-aside for a firm fixed-price purchase order to provide design and installation services for a roof-mounted solar photovoltaic (PV) system at Building 56 of the DLA Distribution San Joaquin facility in California. The project requires the contractor to provide all labor, supervision, materials, and equipment to modify the existing electrical system. The base requirement consists of a 500 KW AC system, with optional CLINs available to increase total capacity up to 750 KW AC. Key technical requirements include the use of solar panels with at least 21 percent efficiency and a 25-year warranty, the installation of SMA Sunny Tripower CORE1 Power Station inverters or equivalents, and strict adherence to California Building Codes, the California Solar Initiative, and NETA standards for third-party commissioning. The period of performance is 450 calendar days from the receipt of the Notice to Proceed. Award will be granted to the lowest priced, responsive, and responsible offeror who provides pricing for all required CLINs. Bidders must submit a bid bond for 20 percent of the value, and the successful awardee must provide performance and payment bonds at 100 percent of the contract price. All quotes must be submitted electronically via the PIEE Solicitation Module by 1:00 PM EST on December 9, 2026. The project is subject to the Davis-Bacon Act and the Buy American Act, and personnel may require security clearances ranging from Tier 3 to Tier 5 depending on their level of network access and risk duties.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

1 day ago

DEADLINE

in 22 days
View Details
NAICS: 562211
New
Federal
DDRV DOT Ozone Inspection
Solicitation # SP330027Q0021
Solicitation SP330027Q0021 is a full and open competition for a single firm-fixed-price purchase order to perform an inspection of hydrostatic equipment at DLA Distribution Richmond Virginia. The scope of work involves a mandatory on-site compliance audit to maintain Department of Transportation Pipeline and Hazardous Materials Safety, specifically focusing on the testing and recertification of pressure vessels and compressed gas cylinders. The contractor must complete the inspection by December 8, 2026, and is responsible for verifying that all regulations are current at the facility, providing necessary documentation for the formal RIN application, and ensuring proper submission of all documents following the inspection. To be eligible, the vendor must provide written proof of formal approval from the DOT/PHMSA to inspect hazardous materials and hold ISO/IEC 17020 and ISO/IEC 17025 certifications. Award will be granted to the responsible quoter who meets all technical salient characteristics and offers the lowest overall price. Evaluation includes a non-rated acceptability check of past performance using systems like SPRS and CPARS. All offerors must be registered in the System for Award Management (SAM) and adhere to strict organizational conflict of interest restrictions, prohibiting them from participating in future procurements resulting from the services provided under this contract. Invoicing and payments will be processed via Wide Area WorkFlow.
Hazardous Waste Treatment and Disposal

POSTED

5 days ago

DEADLINE

in about 22 hours
View Details
NAICS: 541611
Federal
DLA Distribution - Business Opportunities Forecast
Solicitation # SP3300-26-SS-5008
The DLA Distribution Business Opportunities Forecast, solicitation number SP3300-26-SS-5008, serves as a procurement spend profile and forecast for future opportunities within the Department of Defense. The scope of work encompasses a wide array of supplies and services necessary to support the distribution network. Supply requirements include material handling equipment, racking, shelving, furniture, and various packaging materials such as boxes and bubble wrap. Service requirements are organized into specialized portfolios, including housekeeping and hazardous material services, professional and program management support, maintenance and repair of industrial equipment like conveyors and vertical lifts, and the alteration of facilities and infrastructure such as roads and warehouse buildings. Performance locations for these opportunities include distribution centers in Oklahoma City, OK; Pearl Harbor, HI; Puget Sound, WA; Red River, TX; and Richmond, VA. While this is a forecast rather than a specific priced contract, it directs vendors to use the PIEE Solicitation Module via SAM.gov for responding to non-DIBBS opportunities. Interested parties must register as a Proposal Manager to submit or revise proposals. General inquiries can be directed to Ronald Bell at [email hidden], and small business tracking inquiries should be sent to [email hidden].
Administrative Management and General Management Consulting Services

POSTED

7 days ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS