Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Stretch Vascular Grafts (6mm ID, 60cm)

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply and delivery of four stretch vascular grafts, each with a 6mm internal diameter and 60cm length, to be packaged and labeled in compliance with regulatory and operational standards, including appropriate shipping protocols to ensure product integrity. The delivery destination is Fort Bragg, North Carolina, with the zip code 28310, and all logistics must align with military medical supply chain requirements. The solicitation, issued under the NAICS code 339994 for other medical device manufacturing, is structured as a subcontract and falls under the jurisdiction of the Department of Defense through the Medical Supply Chain MD Surg FSF. Bids must be submitted by August 10, 2026, with the opportunity posted on August 2, 2026, through the DIBBS platform for vendor access and response submission.

General Info

Four 6mm x 60cm vascular grafts to Fort Bragg, NC, per DoD medical supply standards, bid due August 10, 2026

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339994 - Broom, Brush, and Mop ManufacturingView NAICS

Place of Performance

FORT BRAGG, NC, 28310, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of 4 units of stretch vascular grafts with 6mm internal diameter and 60cm length, including compliant packaging, labeling, and shipment to Fort Bragg, NC.

Similar Contracts

Same NAICS industry code

CLOTH, CLEANING

Solicitation # SPE8E5-26-T-3752

The contract pertains to the procurement of cleaning cloths designated by part number 599306 and NSN 7920-01-614-3522, with a unit of issue of one box containing 100 items. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and acceptance occurs at the delivery point. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking for Type II shelf-life items, and palletization must adhere to DLA packaging requirements. The item has a 12-month extendable shelf life per RS001, and all packaging and shipping must meet hazardous materials protocols. The delivery destination is AECOM HMMC Okinawa at Camp Kinser, FPO AP 96375, with parallel freight shipping instructions to the same location under JP address details. The contract is governed by DLA technical and quality specifications referenced in the DLA Master List, and the solicitation number SPE8E5-26-T-3752 is valid with a response deadline of August 14, 2026, and an original required delivery date of August 4, 2026. The procurement is under the NAICS code 339994 and managed by the Defense Logistics Agency.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

ELECTION SECURITY SEALS (PULL-TIGHT, PADLOCK, & CABLE), TAMPER EVIDENT LABELS, AND MISC. ELECTION SUPPLIES

Solicitation # 031-3085102-JM

The County of Orange is seeking vendors to supply election security seals including pull-tight, padlock, and cable varieties, along with tamper-evident labels and other miscellaneous election supplies. The solicitation, identified as 031-3085102-JM, has a closing date of August 6, 2026, at 2:00 PM Pacific Time, and all bids must be submitted through the designated third-party procurement portal. The place of performance is specified as Santa Ana, California, with a zip code of 92705, and the contracting officer for the opportunity is listed as lpalmer@biddingo.com. Vendors are required to register on the external website to access full bid documents and are responsible for reviewing all addenda, as updates may be posted without notice. The contract is open to any qualified supplier, with no set-aside designation indicated, and bidders must ensure they meet all technical and administrative requirements outlined in the official documentation accessed via the provided link.

County of Orange

POSTED

DEADLINE

BRUSH, CLEANING, SMALL A

Solicitation # SPE7L3-26-Q-1235

The contract specifies the procurement of 1,377 cleaning brushes with part number 1005-00-690-3115 under solicitation SPE7L3-26-Q-1235, with a delivery deadline of 258 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the acquisition type and timing. The item is classified as a small arms component requiring demilitarization per Category I Munitions List standards. Contractors must comply with Cybersecurity Maturity Model Certification Level 2, either through self-assessment or third-party certification. Packaging must adhere to DLA packaging standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals and variance requests. Inspection and acceptance occur at the manufacturer’s origin, and non-accepted supplies must have all government identification removed. Only components listed on approved Qualified Products Lists or Qualified Manufacturers Lists are acceptable. Physical identification of the item must meet bare item marking standards, though unique identification is not mandated. Technical data associated with this item is controlled under ITAR or EAR regulations; export or disclosure to foreign persons—regardless of location—is prohibited without prior authorization, and access is restricted to contractors who hold valid US/Canada JCP certification, have completed required DOD export training, and are approved by DLA. The place of performance is New Cumberland, Pennsylvania, and inquiries should be directed to Katelyn Young at the provided contact details.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Floor Scrubbers

Solicitation # W911S226U3895

The contract titled Floor Scrubbers is a Small Business Set Aside solicitation issued by the Department of Defense under the office of W6QM Micc-Ft Drum, with the solicitation number W911S26U3895. It was posted on July 30, 2026, and bids must be submitted by August 6, 2026, at 4:10 PM Eastern Time. The North American Industry Classification System code 339994 identifies this as an order for other miscellaneous manufacturing, specifically targeting floor scrubbers, with performance expected at a location with a ZIP code of 54656. The procurement is exclusively reserved for small businesses as defined by the Small Business Administration, ensuring only eligible small entities may respond. Point of contact for inquiries is Troy Boardman, reachable at 502-898-0312 or troy.a.boardman.civ@army.mil, and the opportunity can be viewed online through the SAM.gov platform.

W6QM Micc-Ft Drum

POSTED

DEADLINE

Vision and Eyewear ServicesThe contract titled Vision and Eyewear Services requires the provision of comprehensive vision evaluations, prescription and fitting of eyewear, and the repair or replacement of damaged vision aids. It is structured as a subcontract under the Vocational Rehabilitation agency in Massachusetts, with performance to be conducted at a location in Boston, identified by the zip code 02019. The solicitation was posted on July 29, 2026, and responses are due by September 14, 2026, at 9:00 PM. The North American Industry Classification System code 339994 applies, indicating the focus on other miscellaneous manufacturing related to medical and optical devices. There is no specified set-aside type or organization type, and no point of contact information is provided.履约地点明确在波士顿，合同未指定其他行政或地理细节。

VR - Vocational Rehabilitation

POSTED

DEADLINE

in about 1 month

FLASHLIGHT, LAZERBRI

Solicitation # SPE8E7-26-Q-0274

The contract pertains to the procurement of one box containing twelve LazerBrite model LB2-105-12B flashlights, identified by NSN 6230-01-505-5272, under solicitation SPE8E7-26-Q-0274. The supplier, Tactical Lighting Solutions LLC, is required to deliver the items in strict compliance with DLA packaging standards outlined in RP001, including adherence to MIL-STD-129 for marking and labeling, and commercial packaging per ASTM D3951 unless federal hazardous material standards under FED-STD-313 apply, in which case TQ requirement IP025 governs. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting commercial standards. The contract enforces a firm fixed price with zero tolerance for quantity variance, and delivery must occur within 30 days after award, with both inspection and acceptance points at the destination. Shipment is to be routed to the USS RAFAEL PERALTA DDG 115 via FPO AP 96694-1500, and transportation procedures must follow DLAD PROC NOTES C19 and C20. The item is covered under DLA’s procurement framework, with controlled access to covered defense information, and pricing, delivery, and compliance terms are binding with no flexibility.

Defense Logistics Agency

POSTED

DEADLINE

CLOTH, CLEANING

Solicitation # SPE8E5-26-T-3726

The contract is for the procurement of 1 box of cleaning cloths with NSN 7920-01-614-3522 and part number 599306, issued by the Defense Logistics Agency under solicitation SPE8E5-26-T-3726. The unit of issue is a box containing 100 cloths, with delivery required within 20 days to the Marine Corps Air Facility in Quantico, Virginia, under FOB origin terms and no tolerance for quantity variance. The item is classified as a Type 2 shelf life item with a 12-month extendable lifespan, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements including marking per MIL-STD-129 with special shelf life code 33. Packaging and shipping must adhere to traceable methods only, prohibiting parcel post, and must follow hazardous materials handling procedures. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and the revision in effect at the RFP issue date applies. The item is subject to Covered Defense Information controls and government identification removal for non-accepted supplies. The delivery point is destination, with inspection and acceptance also occurring at destination. The required delivery date is July 30, 2026, and the contract includes specific shipping instructions, a designated point of contact, and federal accounting details for HMX-1 supply operations.

Defense Logistics Agency

POSTED

DEADLINE

Nonmetallic Grommet Manufacturing and SupplyThe contract entails the manufacture and supply of 27 nonmetallic grommets identified by NSN 5325-01-728-9567, with all items required to meet the stringent technical, quality, packaging, and traceability standards established by the Defense Logistics Agency. The product is classified as a Critical Application Item, meaning strict compliance with specifications is mandatory to ensure operational reliability and safety in mission-critical environments. Production must adhere to all applicable DLA requirements without deviation, and full traceability of materials and manufacturing processes is expected throughout the supply chain. This subcontract, issued under NAICS code 339994, is managed by the Department of Defense through the Defense Logistics Agency. The solicitation was posted on July 28, 2026, and performance is expected to be executed in alignment with federal defense supply protocols. Although specific location details for the place of performance or point of contact are not provided, the contractual obligations are binding and must be fulfilled to fulfill Defense Logistics Agency’s procurement requirements for components essential to defense systems.

Defense Logistics Agency

POSTED

DEADLINE

MOUNTING KIT, BODY, V

Solicitation # SPE7L3-26-T-134L

The contract pertains to the procurement of four MOUNTING KITS, BODY, V, identified by NSN 2510-99-464-2470, issued by the Defense Logistics Agency under solicitation SPE7L3-26-T-134L. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and is structured as a fixed-price acquisition under NAICS code 339994. Deliveries are required to be made to the DLA Distribution facility at New Cumberland, PA, with a strict delivery deadline of 165 days after award, corresponding to December 8, 2026, and a need ship date of January 19, 2027. Inspection and acceptance are to occur at destination, governed by FAR 52.246-2, with the Government assuming full responsibility for evaluating conformance upon receipt. The kits must be individually packaged in compliance with MIL-STD-2073-1, Appendix D, using Packaging Code Z and special preservation methods designated as ZZ, validated per ASTM D4169 Distribution Cycle 18, Assurance Level II. Palletization must adhere to DLA’s RP001 requirements, and each unit must include an internal parts list and, if applicable, assembly instructions. All containers must be marked and bar-coded strictly per MIL-STD-129, including special segregation and identification for Code ZZ items. The contract imposes stringent regulatory and compliance obligations under both FAR and DFARS, including mandatory clauses on equal opportunity, combating trafficking in persons, employment eligibility verification, sustainable products, cybersecurity safeguards, subcontracting, and whistleblower protections. Specific DFARS clauses require adherence to NIST SP 800-171 for safeguarding controlled unclassified information, along with reporting of cyber incidents under 252.204-7012 and prohibitions on covered defense telecommunications equipment under 252.204-7018. Transportation by sea must follow 252.247-7023, and hazardous materials, if present, must be labeled per OSHA’s Hazard Communication Standard. Invoicing is exclusively conducted via the Wide Area WorkFlow system, with payment administration details to be confirmed in the resulting award. Offerors must self-certify their small business status,

Defense Logistics Agency

POSTED

DEADLINE

LEVER, REMOTE CONTROL

Solicitation # SPE7M4-26-T-286Q

The contract solicitation SPE7M4-26-T-286Q calls for the procurement of five remote control levers identified by NSN 1680-01-391-1748, with a required delivery date of June 22, 2027 and a need ship date of January 19, 2027, allowing for a 165-day lead time after order placement. The item is to be delivered FOB destination to Hill Air Force Base, Utah, under a firm-fixed-price structure inferred from referenced contract clauses, though the contract type is not explicitly stated. No pricing details are provided in the available documentation, leaving the estimated contract value undetermined. All deliveries must comply with stringent packaging and labeling standards, including adherence to MIL-STD-129 for marking and barcoding, ASTM D3951 for commercial packaging, and DLA’s RP001 for palletization, with DLA’s Master List of Technical and Quality Requirements (RA001) taking precedence over all other standards. Hazardous materials, if present, must be labeled in accordance with OSHA’s Hazard Communication Standard and exempt regulations, and all packaging must include safety data sheets submitted as required. The solicitation mandates full compliance with a broad suite of federal and defense-specific clauses covering labor, cybersecurity, environmental safety, and procurement integrity. Key requirements include adherence to the Combating Trafficking in Persons clause, Employment Eligibility Verification, Sustainable Products, and the Safeguarding of Covered Defense Information and Cyber Incident Reporting standards, reflecting CMMC Level 2 expectations. Contractors must affirm their small business status and provide Unique Entity ID and CAGE codes if supplying covered defense telecommunications equipment, with joint ventures subject to additional partner disclosures. Electronic submission through DIBBS is mandatory by August 6, 2026, with payment processed exclusively via Wide Area WorkFlow using accepted document types including invoices and receiving reports. Inspection and acceptance occur at the destination by government personnel under FAR 52.246-2, and all technical and quality assurance expectations are governed by the DLA Master List. The absence of an explicit Section M evaluation factors section means the basis of award—whether LPTA or trade-off—is not discernible from the available data, though compliance with all technical, safety, and regulatory requirements is foundational to consideration.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-877L

The contract solicitation SPE7L1-26-T-877L is issued by the Defense Logistics Agency under the Department of Defense for the procurement of a single O-RING with NSN 5331-01-617-3976, with a quantity of one unit and a delivery requirement of 20 days after award. The item must be delivered to Camp Kinser, Japan, with FOB Origin terms, meaning title and risk transfer to the government upon shipment from the contractor’s location. Packaging and marking are strictly governed by MIL-STD-2073-1E for packaging, MIL-DTL-117 Type II Class C Style 1 for a medium-duty waterproof and greaseproof bag, and MIL-STD-129 for labeling and barcoding, including 2D Data Matrix codes. Preservations requirements specify cleaning and drying with desiccant (PRES MTHD 33), with no additional preservation, wrap, or cushioning materials. Hazardous material compliance is mandated under 29 CFR 1910.1200, with exceptions only if the material falls under FIFRA, FDCA, CPSA, FHSA, or FAA Act exemptions, and Safety Data Sheets must be submitted prior to award. The contract prohibits ozone-depleting chemicals and intentional use of mercury, and requires hazardous material labels and MSDS documentation for non-exempt substances. The solicitation incorporates numerous Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses, including those related to employment eligibility verification, combating human trafficking, sustainable products, and cybersecurity safeguards, with specific deviations noted for safeguarding covered contractor information systems. Requirements for small business representation, whistleblower protections, and disclosure of information are included, along with flow-down obligations to subcontractors for hazardous material labeling. The contractor must submit all quotes electronically via the DLA Internet Bid Board System by the deadline of August 6, 2026, and use WAWF for invoicing and payment. While no pricing data is provided in the CLIN table, the contract is assumed to be awarded based on technical compliance and regulatory adherence, typical for low-value, standardized items under simplified acquisition procedures. The offeror must provide a valid UEI and CAGE code if supplying covered defense telecommunications equipment and must accurately represent their size status and socioeconomic designation, though no such representations are pre-filled. Acceptance of the product occurs at the destination point, with the government performing inspection against all specified standards

Defense Logistics Agency

POSTED

DEADLINE

Light Assembly Component SupplyThe contract entails the manufacture and delivery of a military-spec light assembly component identified by NSN 6210-01-229-5603, adhering strictly to Defense Logistics Agency standards for quality assurance, packaging, and logistical compliance. The component must meet all technical and performance requirements dictated by defense specifications, with rigorous inspection and certification processes embedded throughout production to ensure reliability in operational environments. Submission of documentation and adherence to DLA logistics protocols are mandatory for successful fulfillment. As a subcontract under the Department of Defense, this award is governed by the NAICS code 339994 and is aligned with the procurement framework of the Defense Logistics Agency. The place of performance and specific delivery locations are not detailed in the provided data, but all units must be packaged and labeled in accordance with DLA’s standardized requirements for military supply chain integration. The contract was posted on July 21, 2026, and is accessible through the DIBBS system under contract number SPE4A624PC947, indicating active participation in the federal defense acquisition pipeline.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

TEST STRIPS, SANITIZING

Solicitation # SPE2DS-26-T-301P

Test strips for sanitizing testing are designed to measure the concentration of quaternary ammonium compound (QAC) sanitizers used in dishwashing rinse cycles, with a detection range of 50 to 400 ppm. These impregnated paper strips provide a quick and reliable method to verify sanitizer strength, ensuring proper disinfection standards are met in institutional and commercial food service environments. The product is identified by NSN 6550-01-452-1775 and is being procured under a federal solicitation issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with a purchase request number of 7017702433 and a quantity of two units. The solicitation, numbered SPE2DS-26-T-301P, was posted on August 3, 2026, with responses due by August 10, 2026. Delivery is required within five days of award, and the place of performance is designated as APO with ZIP code 96278-2060. The primary point of contact for inquiries is Anh Lam, reachable via email at anh.lam@dla.mil or phone at 215-737-7477.

Family Planning Centers

POSTED

about 6 hours ago

DEADLINE

BANDAGE, ADHESIVE

Solicitation # SPE2DS-26-T-302E

The contract specifies the supply of adhesive bandages measuring 0.750 inches by 3 inches, packaged in quantities of 30 per unit, with a total order of three packages. The bandages are sterile, feature a flesh/clear color, and are affixed to a plastic adhesive backing. Each package must be sealed in a suitable unit container that protects the contents from damage, and all units must be packed in commercial shipping containers compliant with low-rate carrier standards for safe delivery to the designated point. The product must have a minimum shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling requirements mandate inclusion of the date of manufacture, expiration or retest date, contract number, and lot number, all formatted in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129. Compliance with DLA packaging and medical marking standards is mandatory, and all supplies must be marked as specified. The bandages are identified by NSN 6510-01-519-5781 and fall under the NAICS code 339113, with a required delivery within 20 days of award. The solicitation is issued under SPE2DS-26-T-302E by the Department of Defense’s Medical Supply Chain, and bidders must clearly state the source and part number being offered. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to defense information controls.

Surgical Appliance and Supplies Manufacturing

POSTED

about 6 hours ago

DEADLINE

INTRODUCER KIT, CATH

Solicitation # SPE2DS-26-T-301U

The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, including a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and two inches of 2-0 nylon suture with reverse cutting. The kit is identified by NSN 6515-01-663-2913 with a quantity of 14 kits required for delivery within 84 days of award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the scale of the acquisition. Packaging must adhere to DLA specifications and all non-accepted supplies must be cleared of government identification prior to shipment. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-301U, was posted on August 3, 2026, with responses due by August 10, 2026, under NAICS code 339113 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain under the agency name Medical Supply Chain MD Surg FSF, with performance addressed to APO 09227-0000.

Surgical Appliance and Supplies Manufacturing

POSTED

about 6 hours ago

DEADLINE

SPHYGMOMANOMETER

Solicitation # SPE2DS-26-T-300Q

An aneroid sphygmomanometer designed for pediatric use, this device features a two-tube cuff with a blue nylon material and hook-and-loop closure, calibrated for accurate blood pressure measurements up to 300 mmHg. It includes an inflation bulb with tubing and a check valve, a no-pin-stop manometer with integrated tubing, and a carrying case for portability. The cuff is clearly marked with artery labels and index range markings to facilitate proper placement and readings. The manometer is backed by a ten-year calibration warranty, ensuring long-term accuracy and reliability. The unit is supplied as a complete assembly, with each item considered a single unit of issue. This contract requires the delivery of eight units under NSN 6515-01-311-0419, with a purchase request number 7017723157 and a delivery requirement of 84 days after order award. The solicitation number is SPE2DS-26-T-300Q, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance taking place in APO 96260-5479. Bidders must provide the source and part number for the supplied item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. The government mandates removal of its identification from any non-accepted supplies. The solicitation closed on August 10, 2026, after being posted on August 3, 2026, under NAICS code 339112 for medical device manufacturing.

Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-301F

The contract specifies the procurement of a reusable, black, lace-closure ankle splint made of nylon, designed to stabilize ankle injuries and capable of being washed. The item is regulated by the FDA and must be supplied with specific manufacturer part numbers including Medical Specialties Inc P/N 223615 and Henry Schein P/N 2430003; bidders are required to clearly state the country of origin and part number being offered. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a protective container and shipped in exterior containers that ensure safe delivery at the lowest rate to the designated destination. Marking must adhere to Medical Marking Standard No. 1, superseding all prior referencing standards, and copies of this standard are available through DLA Troop Support. The National Stock Number is 6515-01-529-9830, with a quantity of 3 units required at a unit price of $3.00, totaling $9.00. Delivery is due within 84 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The solicitation falls under DLA’s medical acquisition procedures and incorporates all applicable technical and quality requirements referenced in the DLA Master List, with packaging required to meet MIL-STD-2073-1E. The contract is issued under solicitation SPE2DS-26-T-301F, with responses due by August 10, 2026, and the place of performance is APO, ZIP 96260-5479.

Surgical Appliance and Supplies Manufacturing

POSTED

about 6 hours ago

DEADLINE

CHIP, HYDROGEN PEROX

Solicitation # SPE2DS-26-T-300S

The contract specifies the procurement of a single unit of a hydrogen peroxide test chip designed for use with a CMS analyzer, featuring ten measurement capillaries pre-filled with substance-specific reagent for detecting hydrogen peroxide concentrations within a range of 0.20 to 2.0 PPM, enabling ten individual tests. The item is identified by NSN 6550-01-530-8328 and is governed by solicitation SPE2DS-26-T-300S, issued by the Department of Defense’s Medical Supply Chain under the NAICS code 325413. The delivery is required within 84 days of award, with performance taking place at APO 96260-5479. The product must comply with stringent packaging and labeling requirements under Medical Marking Standard No. 1, superseding MIL-STD-129, with all units sealed in commercial-grade containers to prevent damage during transit and shipped in exterior containers suitable for carrier acceptance at the lowest cost. A critical shelf-life condition mandates that the item must have no more than one month elapsed since manufacture at the time of delivery, with a total non-extendable shelf life of 12 months from production. Labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number in accordance with MMS1C guidelines. The procurement is subject to DLA packaging and quality requirements, and the contractor must provide source and part number details, with all technical specifications incorporated from the DLA Master List of Technical and Quality Requirements.

In-Vitro Diagnostic Substance Manufacturing

POSTED

about 6 hours ago

DEADLINE

CHIP, CARBON DIOXIDE

Solicitation # SPE2DS-26-T-301A

The CHIP, CARBON DIOXIDE item is a diagnostic unit containing ten measurement capillaries pre-filled with a carbon dioxide reagent, designed specifically for use with the CMS gas analyzer. It has a detection range of 200 to 3000 ppm and is intended for medical use in gas analysis applications. This item is classified as a TYPE I (CODE M) shelf-life item with a strict 24-month non-extendable shelf life, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be sealed in a protective container, with shipping containers ensuring safe, low-cost delivery to the specified point of performance at Offutt AFB, Nebraska. All labels must clearly show the date of manufacture, expiration or retest date, contract number, and lot number in accordance with MMS1C standards. The procurement is governed by DLA Master List technical and quality requirements, with applicable provisions including packaging standards, removal of government identification from non-accepted supplies, and handling of covered defense information. The contract is issued under solicitation SPE2DS-26-T-301A, with a single unit requested and a delivery requirement of five days after award. The item falls under NAICS Code 621410, and the contract is managed by the Department of Defense’s Medical Supply Chain, with Mary-Kathryn Donahue listed as the primary point of contact. All documentation, labeling, and compliance must adhere strictly to current DLA directives, and the solicitation response deadline is set for August 10, 2026.

Family Planning Centers

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-300U

The contract is for the procurement of a large, sterile, disposable oral airway device, specifically the Berman type at 100 mm length, with a unit of issue of 10 pieces per package. The item is identified by the NSN 6515-01-367-5272 and is being solicited under SPE2DS-26-T-300U with a response deadline of August 10, 2026. Deliveries must be completed within 20 days after award. Bidders are required to clearly state the manufacturer source and part number being offered. Technical and quality requirements referenced under RA001, RP001, and RQ011 govern this procurement, incorporating standards from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition type. Packaging and handling must comply with DLA requirements, and any non-accepted supplies must have government identification removed prior to return. The place of performance is Charleston AFB, South Carolina, under the Department of Defense’s Medical Supply Chain, and the procurement falls under NAICS code 339113 for surgical and medical instrument manufacturing.

Surgical Appliance and Supplies Manufacturing

POSTED

about 6 hours ago

DEADLINE

NEEDLE SET, INTRAOSS

Solicitation # SPE2DS-26-T-301Q

The contract specifies the procurement of pediatric intraosseous needle sets designed for use with the EZ-IO battery-powered driver, intended for patients weighing between 3 and 39 kg. Each unit includes five sterile 15-gauge needles, each 15mm in length, constructed from 304 stainless steel and free of latex, along with five EZ-Connect connectors and five wrist bands for securement. The unit of issue is PG/5each, with a total order quantity of two packs. The materials must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and proper packaging is required to ensure protection from damage during transit, with commercial exterior containers suitable for safe delivery by common carriers at the lowest feasible rate. All supplies must be marked in accordance with DLA standards, and the vendor must provide the source and part number for each item supplied, tied to the NSN 6515-01-537-9013. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to DLA packaging and defense information protocols. Delivery is required within 20 days of award, with performance specified at Charleston AFB, and the solicitation was issued under contract number SPE2DS-26-T-301Q with a bid deadline of August 10, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

GLOVES, CHEMICAL AND

Solicitation # SPE2DS-26-T-300Z

The contract specifies the procurement of 8 pairs of chemical and oil protective gloves, made from neoprene over natural rubber with a 26 mil thickness and 12 inches in length, sized extra-large. The gloves are flock lined, feature a tractor tread grip, and are colored black-over-blue with a safety design. They are puncture resistant and offer resistance to acids, alcohols, oils, and caustics, meeting compliance with 21 CFR parts 170–199. The unit of issue is a pair, and the NSN is 8415-01-448-8646. Bidders must clearly state the source and part number being supplied, and all supplies must adhere to DLA packaging and technical requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The solicitation, identified as SPE2DS-26-T-300Z, was posted on August 3, 2026, with a response deadline of August 10, 2026, and requires delivery within 20 days after order placement. The purchase request number is 7017702020, and the place of performance is Beale AFB, California, with a ZIP code of 95903-1908. The contracting agency is the Department of Defense under the Medical Supply Chain MD Surg FSF unit, and the primary point of contact is Marc Canalichio, reachable via email and phone. The NAICS code is 315990, indicating the classification for other textile product mills, and the procurement is for federal use without a set-aside designation.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 6 hours ago

DEADLINE

TUBING, ANESTHESIA

Solicitation # SPE2DS-26-T-301G

The contract specifies the procurement of anesthesia tubing, 22mm by 36 inches, in boxes of ten units, with a total quantity of two boxes required. The item is identified by NSN 6515-01-667-6524 and is intended for medical use under the Department of Defense’s Medical Supply Chain. Packaging must comply with Commercial standards as outlined in the procurement documentation, requiring each unit to be sealed in a protective container to prevent damage, with exterior shipping containers suitable for safe transport by common carriers at the lowest cost to the delivery point at Camp Lejeune, NC. All items must be labeled in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and instructions for obtaining this standard are provided through DLA Troop Support. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Delivery is due within 20 days of award, and the solicitation was issued under contract number SPE2DS-26-T-301G with a response deadline of August 10, 2026. The contract is managed by Patrick Esposito of the Department of Defense, and the NAICS code for the procurement is 339112.

Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

AIRWAY, SUPRAGLOTTIC

Solicitation # SPE2DS-26-T-302G

The airway device is a disposable supraglottic airway designed as a simple-to-use alternative for patient ventilation, featuring a dedicated channel that allows passage of a gastric tube and a straightened, beveled distal tip to facilitate proper placement posterior to the larynx and into the upper esophagus. Each unit includes a 60cc syringe and lubrication, is sized as size 5 with a purple tip, and measures 1.02 feet by 0.48 feet by 0.15 feet. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. Labeling must comply with the latest revision of MMS1A and include the manufacturer date, expiration or retest date, and contract and lot numbers. All packaging and marking must adhere to the Medical Marking Standard No. 1 and DLA packaging requirements, with government identification removed from non-accepted supplies. The item is identified by NSN 6515-01-699-9685, with a quantity of 20 units required under solicitation SPE2DS-26-T-302G, issued on August 3, 2026, and due for response by August 10, 2026. Delivery is expected within 20 days after order award to Fort Hood, Texas, with technical and quality specifications governed by the DLA Master List of Technical and Quality Requirements incorporated by reference. Bidders must provide the source and part number for the product being offered.

Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE