Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Stud Assembly, Turnlock Fasteners

Active

Federal

Response Deadline10/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense ASC Commodities Division involves the manufacture or sourcing of 137 turnlock fastener stud assemblies under NSN 5325011767079. The provider serves as a supplier for prime contractors fulfilling DLA supply contracts, ensuring all deliverables meet the DLA Master List of Technical and Quality Requirements. Strict adherence to military standards is required, specifically MIL-STD-2073-1E and RP001 for packaging, MIL-STD-129 for marking, and MIL-STD-130N for identification. The contract falls under NAICS code 339993 and was posted on September 17, 2026, with a response deadline of October 2, 2026.

General Info

Supply 137 turnlock fastener stud assemblies for DoD ASC meeting strict military standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

339993 - Fastener, Button, Needle, and Pin ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-U-4253.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STUD ASSEMBLY, TURNLOCK

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 17

subcontract

Response DeadlineOct 2

Submission deadline

Response Deadline

10/02/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized turnlock fastener stud assemblies for prime contractors delivering DLA supply contracts. Manufactures or sources NSN 5325011767079, performing packaging per MIL-STD-2073-1E and RP001, marking per MIL-STD-129, and identification per MIL-STD-130N. Adheres to DLA Master List of Technical and Quality Requirements. Delivers 137 units of Stud Assembly, Turnlock Fastener.

Similar Contracts

Same NAICS industry code

Supply of Close Tolerance Screws (NSN 5305-01-321-6678)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Bolt and Insert Assembly ManufacturingThis subcontract, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, involves the manufacture and supply of 40 Bolt and Insert Assembly units. The contractor is responsible for fabricating these components to meet the technical specifications of NSN 5342011162330 using precision machining and fastener fabrication equipment. Compliance with MIL-STD-129 for marking and DFARS 252.223-7008 regarding hexavalent chromium is strictly required. The project is designated as a Total Small Business Set-Aside under NAICS code 339993, with the place of performance located in Tracy, California. The solicitation was posted on September 17, 2026, with a response deadline of September 25, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Threaded Pin-Rivets (NSN 5320010740285)This subcontract involves the supply of 421 units of threaded pin-rivets under NSN 5320010740285 for prime contractors supporting DLA supply contracts. The selected provider must manufacture or source the hardware according to specific NSN technical specifications and Critical Application Item quality standards. All deliverables must include quality certifications and safety data sheets for hazardous materials. The contract is managed by the ASC Commodities Division of the Department of Defense, with performance taking place at Hill AFB. Compliance with DFARS 252.223-7008 regarding Hexavalent Chromium is mandatory. The procurement falls under NAICS code 339993, with a response deadline of September 25, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Fastener Supply (Turnlock Studs)This subcontract with the Department of Defense ASC Commodities Division involves the manufacture and supply of specialized aerospace turnlock studs for prime contractors fulfilling DLA supply contracts. The scope specifically covers the delivery of physical turnlock fasteners under NSN 5325011038014, ensuring all components meet the rigorous specifications for part numbers 3M303A5W-8 and 192014-5-8. All supplied parts must adhere to Critical Application Item standards, requiring strict aerospace tolerances and comprehensive material certifications. The contract falls under NAICS code 339993, with a response deadline of October 2, 2026, for the delivery of quantities as specified by individual delivery orders.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of NAS1407C8M12 FastenersThis subcontract involves the supply of specialized aerospace fasteners, specifically part number NAS1407C8M12, to support prime contractors delivering DLA supply contracts for the Department of Defense ASC Commodities Division. The provider is responsible for manufacturing or sourcing parts that strictly adhere to TDP Rev A Gen 1, NAS1407, and NASM10971 Revision 1 standards. Quality assurance is maintained through sampling per MIL-STD-1916 or ASQ H1331 Table 1, and all items must pass an Origin Inspection. The contract requires the delivery of physical parts accompanied by detailed receiving reports and quality certification documentation. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on September 17, 2026, with a response deadline of September 25, 2026, under NAICS code 339993.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305-01-41-51890)This subcontract involves the supply of socket head cap screws for prime contractors under Defense Logistics Agency supply contracts. The contractor is responsible for manufacturing or sourcing fasteners that meet DLA Master List technical requirements, with the option to use traditional methods or ESA-approved additive manufacturing. All items must comply with the Buy American Act and adhere to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. The specific requirement is for the delivery of 10 units of NSN 5305-01-41-51890 to MCLB Albany, Georgia. This procurement is managed by the ASC Commodities Division of the Department of Defense under NAICS code 339993.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Fastener Assembly Manufacturer/SupplierThis subcontract opportunity with the Department of Defense ASC Commodities Division involves the manufacture and supply of specified fastener assemblies for prime contractors on Defense Logistics Agency procurement projects. The selected provider must utilize CNC and threading equipment to produce assemblies that adhere to the DLA Master List of Technical and Quality Requirements. A critical requirement for this contract is the implementation of a manufacturer's inspection system that complies with either SAE AS9003 or ISO 9001 standards. The project is categorized under NAICS code 339993 and specifies that completed fastener assemblies be delivered through the First Destination Transportation program. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of September 25, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of NSN 0167-21-411 (Screws/Fasteners)

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Aerospace Fasteners (NAS1352N06-6B)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Blind Aircraft Fasteners (NSN 5325-01-552-9054)This subcontract with the Department of Defense ASC Supplier OEM Division involves the supply of 33 specialized aircraft blind fasteners under NSN 5325-01-552-9054. The contractor is responsible for manufacturing or sourcing the fasteners, ensuring bare item marking adheres to RQ017, and following ASTM D3951 and MIL-STD-129 packaging standards. To qualify, the provider must maintain ISO 9001:2015 inspection systems and ensure full compliance with the Buy American Act. The performance of this contract will take place in New Cumberland, Pennsylvania, with a response deadline of September 24, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Straight Headless Pins (NSN 5315015437372)This subcontract involves the supply of 20,000 straight headless pins for prime contractors supporting the Department of Defense under the ASC Commodities Division of DLA Aviation. The contractor is responsible for manufacturing or sourcing the pins to meet the exact technical specifications of NSN 5315015437372, with all quality control, packaging, and palletization adhering to RP001 DLA Packaging Requirements for Procurement. The project falls under NAICS code 339993 and specifies the place of performance in Tracy, California. The solicitation was posted on September 16, 2026, with a response deadline of September 24, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Shoulder Screws (NSN 5305005166241)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Manufacturing and Supply of Tabbed Regulator Support Key WashersThis subcontract involves the manufacturing and supply of 194 tabbed regulator support key washers for prime contractors under DLA Aviation supply contracts. The components must be produced according to NSN 5310-005-901786 using precision machining or stamping equipment. All work is overseen by the Department of Defense ASC Commodities Division and will be performed at Tinker AFB. The contractor is responsible for all testing, packaging, and labeling in strict accordance with the DLA Master List of Technical and Quality Requirements and hazard communication standards under 29 CFR 1910.1200. The project falls under NAICS code 332722, with a response deadline of September 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

Electrical Component Supply (Connectors, Terminals, and Wire)This subcontract with the Department of Defense ASC Commodities Division focuses on the supply of raw materials and specialized electrical components for prime contractors. The scope includes sourcing and delivering aerospace-grade wires, terminals, and Mil-Spec connectors as specified in TDP Rev D Gen 4. Performance will take place at Hill AFB, with the supplier responsible for providing certifications of conformance and managing cure-date documentation for all delivered parts. The contract requires strict adherence to prohibitions on covered telecommunications equipment and falls under NAICS code 423610. Interested parties must respond by September 23, 2026, to provide bulk electrical components and raw wiring materials in accordance with the established technical requirements.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Wiring Harness Manufacturing and AssemblyThis subcontract with the Department of Defense ASC Commodities Division involves the fabrication and assembly of specialized branch wiring harnesses for prime contractors. The manufacturing process must adhere to TDP Rev D Gen 4 and specific reference drawings, including FMS-1049 Rev E, M016 Rev AB, C7551 Rev AM, and FQML-P5071-8 Rev 8, utilizing assembly jigs, crimping, and soldering equipment. The scope of work includes performing First Article Testing in accordance with government requirements and delivering completed, tested, and packaged wiring harnesses. Performance of these services is located at Hill AFB, and the project falls under NAICS code 335931.

Current-Carrying Wiring Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Power Cable Assemblies (NSN 6150-01-560-2064)This subcontract, issued by the Department of Defense ASC Commodities Division, seeks a provider for specialized electrical power cable assemblies identified by NSN 6150-01-560-2064. The project is designated as a Total Small Business Set-Aside under NAICS code 335999, with a response deadline of October 5, 2026. The selected provider must supply physical power cable assemblies for prime contractors on stock buy projects while maintaining a valid CAGE code for shipping and acceptance. Strict adherence to the Buy American and Balance of Payments Program certifications is required to ensure all end products originate from domestic or qualifying countries.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

MIL-STD-129 and MIL-STD-2073-1E Packaging ServicesThis subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the Department of Defense ASC Commodities Division. The scope of work focuses on the delivery of marked and packaged meters, requiring strict adherence to MIL-STD-129 for marking, including the specific code -05 for delicate instruments. Packaging operations must be executed according to MIL-STD-2073-1E, utilizing Packaging Data QUP:001, Pres Mthd:10, and Clng/Dry:1. The contractor is responsible for using specialized preservation and wrapping materials tailored for delicate instrumentation. Performance of these services will take place in Tracy, California.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Supply of Flow Rate Indicating Meters (P/N 7058-G501)This subcontract involves the procurement of 21 flow rate indicating meters for prime contractors supporting Department of Defense projects under the ASC Commodities Division. The required items must match part number 7058-G501 from Howell Laboratories Inc and adhere to NSN 6680014589470 specifications. All deliverables must comply with Critical Application Item quality standards and FAR 52.223-3 regulations regarding hazardous material identification. The contract is categorized under NAICS code 334519 and specifies delivery of the units FOB Origin. Performance of the contract is centered in Tracy, California. The solicitation was posted on September 18, 2026, with a response deadline of September 23, 2026.

Other Measuring and Controlling Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

Machine Screw Supply (NSN 5305017215467)This subcontract with the ASC Commodities Division of the Department of Defense involves the procurement of 29,000 machine screws under NSN 5305017215467. The supplier is responsible for manufacturing or sourcing the screws to ensure they are mercury-free and packaged according to DLA military technical standards. Quality assurance must be maintained through sampling and inspection processes adhering to MIL-STD-1916 or ASQ H1331. The deliverables are to be shipped FOB Origin to New Cumberland, Pennsylvania. This requirement falls under NAICS code 332722 and is intended for prime contractors supporting DLA Aviation supply contracts. The response deadline for this opportunity is September 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Self-Locking Nut AssembliesThis subcontract with the Department of Defense ASC Commodities Division involves the manufacture and supply of 119 self-locking nut assemblies designed for gang channels, specifically meeting NSN 5310-00-372-8312. The contractor is responsible for sourcing the components and ensuring all quality assurance and packaging adhere to the specified statement of work standards. Performance will take place at Robins Air Force Base, and the contractor must maintain compliance with NIST SP 800-171 for the secure handling of covered defense information. The opportunity was posted on September 18, 2026, with a response deadline of September 23, 2026, under NAICS code 334418.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Flat Washers (NAS1149G0832P)This subcontract through the ASC Commodities Division of the Department of Defense involves the supply of 1,027 specialized flat washers, part number NAS1149G0832P. The contractor is responsible for manufacturing or sourcing these components in strict compliance with National Aerospace Standard specifications and providing all necessary quality assurance documentation required for DLA Aviation hardware. The performance for this contract is located at Hill AFB, zip code 84056-5734, under NAICS code 332722. The solicitation was posted on September 18, 2026, with a response deadline of September 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Tapered Roller Cups (NSN 3110-01-653-7449)This subcontract involves the procurement of nine tapered roller cups meeting the technical specifications of NSN 3110-01-653-7449 for the Department of Defense ASC Commodities Division. The supplier is responsible for providing these units to prime contractors while adhering to standard commercial packaging and shipping requirements. The contract falls under NAICS code 333311 and specifies a place of performance in New Cumberland, Pennsylvania. The solicitation was posted on September 18, 2026, with a response deadline of September 23, 2026.

Automatic Vending Machine Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Eye Bolts (MS27950-6)This subcontract with the ASC Commodities Division of the Department of Defense requires the manufacture or sourcing of 64 specialized eye bolts, identified by NSN 5306009330595. The components must strictly adhere to technical specification MS27950-6 and reference standard FF-T-791B(1), with a specific emphasis on precision machining to achieve the required oval eye physical geometry. The contract falls under NAICS code 332722 and mandates full compliance with FAR 52.223-3 regarding the handling and reporting of hazardous materials. Performance of the contract will take place in New Cumberland, Pennsylvania, with a response deadline set for September 25, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305014142861)This subcontract involves the manufacture and supply of 44 units of socket head cap screws, identified by NSN 5305014142861, for prime contractors supporting DLA Aviation supply contracts. The items must meet MIL-DT-1222J mechanical properties and markings, with strict adherence to MIL-STD-129 and IP056 compliance. Packaging and sampling requirements are governed by RP001, MIL-STD-2073-1E, MIL-STD-1916, or ASQ H1331. The contract is managed by the ASC Commodities Division of the Department of Defense under NAICS code 325311. Delivery is set as FOB Origin to DLA Distribution San Joaquin, located in Tracy, California. The solicitation was posted on September 18, 2026, with a response deadline of September 23, 2026.

Nitrogenous Fertilizer Manufacturing

POSTED

about 21 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS