Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Thermal-Overload Protectors for Electrical Motors

Active

Federal

Response Deadline11/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply and delivery of one thermal-overload protector for electrical motors, specifically NSN 6110-01-659-5090, to support prime contractors on DLA supply contracts. The procurement is managed by the Department of Defense under the DLA Weapons Support Maritime Supply Chain. All deliverables must strictly adhere to the DLA Master List of Technical and Quality Requirements and comply with MIL-STD-129 standards for marking, shipment, and storage. The selected provider is responsible for delivering the component to the specified government location in FPO 09595 and providing all necessary shipping documentation, including the invoice and receiving report. This opportunity falls under NAICS code 335999, with a response deadline set for November 6, 2026.

General Info

Supply one thermal-overload protector for DLA by November 6, 2026, to FPO 09595.

Agency

Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component Manufacturing

Place of Performance

FPO, AE, 09595, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M1-27-T-1619.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PROTECTOR, THERMAL-OVER

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineNov 6

Submission deadline

Response Deadline

11/06/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies thermal-overload protectors for electrical motors for prime contractors on DLA supply contracts. Supplies and delivers NSN 6110-01-659-5090 in compliance with the DLA Master List of Technical and Quality Requirements and MIL-STD-129 for marking for shipment and storage. Provides required shipping documentation, including invoice and receiving report. Delivers one thermal-overload protector to the specified government location.

Similar Contracts

Same NAICS industry code

Manufacturer of Branched Wiring Harnesses (NSN 6150-00-884-2069)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Wiring Harness Fabrication and Assembly (NSN 5995-01-705-8842)This subcontract opportunity with the DLA Weapons Support ASC Commodities Division involves the fabrication and assembly of 50 complete wiring harnesses under NSN 5995-01-705-8842. The contractor is responsible for manufacturing assemblies according to TDP Rev B Gen 2 and Basic Drawing NR 19207 12610418 Revision B, which includes performing First Article Testing and ensuring all final products are packaged in accordance with MIL-STD-2073-1E. The project is a total small business set-aside under NAICS code 335999. To be eligible, contractors must maintain ISO 9001:2015, CMMC Level 2, and JCP certifications to handle export-controlled data. Interested parties must submit their responses by November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Light Indicators (NSN 6210-01-686-4475)

DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

Supply of Electrical Connector Covers (NSN 5935011286144)

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Wiring Harnesses (NSN 6150-013334141)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supplier of Light-Switch (NSN 5999-00-0563251)This subcontract involves the sourcing and manufacture of 19 light-switch units identified by NSN 5999-00-0563251 for the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The supplier is responsible for ensuring all components meet strict technical specifications and comply with FAR 52.204-24, with packaging performed according to RP001 DLA Packaging Requirements for Procurement. The contract falls under NAICS code 335999 and specifies New Cumberland as the place of performance. Interested parties must adhere to the timeline established by the October 29, 2026, posting date and the November 9, 2026, response deadline.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 1 hour ago

DEADLINE

Supply of NSN 5940-01-367-4345 Terminals

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 1 hour ago

DEADLINE

Supply of Connector Adapters (NSN 5935-01-556-5793)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE4A6-27-R-X142

Solicitation SPE4A6-27-R-X142 is an Indefinite Delivery Purchase Order (IDPO) issued by the Defense Logistics Agency (DLA) Weapons Support ASC Commodities Division for the procurement of wiring harnesses under National Stock Number 5995-01-705-8842. The contract is designed as a fixed-price agreement with a base period of five years, remaining valid until the aggregate total of orders reaches a ceiling of 350,000 dollars. The primary requirement consists of 50 units, with a total delivery timeline of 509 days, which includes 90 days for First Article Testing (FAT) and 329 days for production following FAT approval. Delivery is to be made to various CONUS stock locations, with FOB destination terms applying specifically to FAT requirements. The contract mandates strict quality and security compliance, including ISO 9001:2015 standards and Cybersecurity Maturity Model Certification (CMMC) Level 2. Technical data is subject to ITAR and EAR export controls, and contractors must adhere to DFARS 252.204-7012 for safeguarding covered defense information. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively. Award determination is based on best value, weighing price, past performance, and quoted delivery, with a heavy emphasis on SPRS assessments and historical quality and delivery compliance. Invoicing and payment are processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

MOTOR ASSEMBLY, ELECTRI

Solicitation # SPE7M1-27-T-1780

Solicitation SPE7M1-27-T-1780 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one electric motor assembly, identified by NSN 6105016268154. The item is designated as a critical application item and is destined for the USS JACKSON LCS 6. The required delivery date is October 7, 2026, with a delivery period of 20 days after award. Shipping is FOB Destination, and the contractor is required to use the Wide Area WorkFlow system for electronic invoicing and receiving reports. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It includes specific prohibitions against the intentional addition of mercury or mercury-containing compounds and prohibits the use of additive manufacturing for the produced items. Key regulatory requirements include the Buy American and Balance of Payments Program, DFARS cybersecurity reporting standards, and the prohibition of covered defense telecommunications equipment. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Award may be subject to HUBZone price evaluation preferences, and the procurement is categorized under NAICS code 335999.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

INSULATOR, PLATE

Solicitation # SPE4A6-27-T-7529

Solicitation SPE4A6-27-T-7529 is a federal procurement issued by the DLA Weapons Support ASC Commodities Division for the supply of insulator plates, also identified as semiconductor insulator pads. This critical application item is governed by NSN 5970010875728 and must be produced in accordance with reference drawing 19200 9356184, dated May 7, 1991. The requirement consists of two line items totaling 1,564 units, with 210 units destined for DLA Distribution San Diego and 1,354 units for the DLA Distribution DDSP New Cumberland facility. The original required delivery date is February 17, 2027, with a need ship date of April 27, 2027, and a delivery lead time of 171 days after receipt of order. The contract mandates strict adherence to quality and technical standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Inspection and acceptance will occur at the destination, utilizing sampling methods per MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Key regulatory requirements include CMMC Level 2 self-assessment, compliance with the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for electronic invoicing. All quotations must be submitted via the DIBBS portal by November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

CASE, POWER SUPPLY

Solicitation # SPE7L4-27-T-0713

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

Same awarding agency

Supplier of Spring-Loaded Shaft Seal AssembliesThis subcontract, issued by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, requires the provision of three spring-loaded shaft seal assemblies. The supplier is responsible for manufacturing or sourcing parts that meet NSN 4320016927342 and must strictly adhere to ASTM D3951 and MIL-STD-129 standards for packaging and labeling. Performance of the contract takes place in Tracy, California, under NAICS code 332999. The agreement is designated as a Total Small Business Set-Aside and mandates compliance with the DLA Master List of Technical and Quality Requirements. Additionally, the supplier must follow DFARS 252.204-7012 regulations regarding cybersecurity reporting. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Alternating Current Motors (NSN 6105-01-334-7554)

Motor and Generator Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Sediment Strainer Elements (NSN 4730-00-477-0005)This subcontract, issued by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, requires the manufacture or sourcing of 37 sediment strainer elements identified by NSN 4730-00-477-0005. The selected provider will supply these elements to prime contractors fulfilling DLA supply contracts, with delivery terms established as FOB Origin. The contract mandates strict adherence to quality and logistics standards, requiring packaging per ASTM D3951 and RP001 and marking in accordance with MIL-STD-129. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332999, with a response deadline of November 13, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

DLA Compliant Packaging and Shipping

General Warehousing and Storage

POSTED

about 1 hour ago

DEADLINE

Seal Assembly Manufacturing/Supply

POSTED

about 1 hour ago

DEADLINE

Electric Motor Assembly (NSN 6105-01-626-8154)

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 1 hour ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-27-T-1778

This solicitation, issued by the DLA Weapons Support Maritime Supply Chain, is a small business set-aside for the procurement of 25 spring-loaded shaft seal assemblies under NSN 4320-01-140-4084. The requirement is categorized under NAICS code 339991, with a delivery timeframe of 116 days after order and a designated delivery location in Jacksonville, Florida. The government specifies that items must be delivered FOB Destination and prohibits the use of additive manufacturing for the production of these components. The contract mandates strict adherence to DLA packaging and quality standards, specifically referencing RP001 for palletization, ASTM D3951 for general packaging, and MIL-STD-129 for marking and labeling. Technical data associated with this item is subject to export control under ITAR or EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of hexavalent chromium. Inspection and acceptance will occur at the destination.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7M1-27-T-1794

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 1 hour ago

DEADLINE

ELECTRONIC COMPONENTS

Solicitation # SPE7M1-27-T-1789

Semiconductor and Related Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

MOTOR, ALTERNATING CURR

Solicitation # SPE7M1-27-Q-0142

Solicitation SPE7M1-27-Q-0142 is a small business set-aside request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 45 alternating current motors. This is designated as a critical application item with a required delivery date of 260 days after the order is placed. The procurement specifies restricted source items, referencing part number 801621-152 from Reliance Electric Company (CAGE 71956) and part number MTR-TA0-B78V2930M from Flowserve Corp (CAGE 52374). The items are identified by NSN 6105-01-334-7554 and must be delivered to DLA Distribution San Diego. The contract mandates strict adherence to quality and technical standards, including the DLA Master List of Technical and Quality Requirements and NAVSEA 5100-003D regarding the restriction of mercury compounds. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. This solicitation is issued under Special Emergency Procurement Authority (SEPA), meaning an award may be made prior to the formal return date.

Motor and Generator Manufacturing

POSTED

about 1 hour ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-27-T-1779

Solicitation SPE7M1-27-T-1779 is a total small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of three spring-loaded shaft seal assemblies, identified by NSN 4320-01-692-7342 and Air & Liquid Systems Corporation part number 12-0204-01. The contract requires delivery to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of May 30, 2027, and a delivery timeline of 201 days after receipt of order. Shipping is designated as FOB Origin under the First Destination Transportation program, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129 for marking and labeling, while ensuring that the DLA Master List of Technical and Quality Requirements and RP001 packaging requirements take precedence. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, specifically those regarding the Buy American Act, cybersecurity reporting under DFARS 252.204-7012, and restrictions on covered defense telecommunications equipment. All quotes and communications are managed through the DIBBS portal.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of Power Supply Unit (NSN 6130-01-735-0483)

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Electrical Plug Connectors (NSN 5935010289416)

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Junction Box Assembly (NSN 5975015569356) Supplier

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Electrical-Electronic Control Panels (NSN 6110-01-717-5481)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supplier of Metal Flexible Conduit Assemblies (NSN 5975013874448)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Radio Frequency Grounding Contact Strips

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Electrical-Electronic Control Panels (NSN 5895-01-421-7715)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Battery Power Supply (NSN 6130016428286)

Defense Logistics Agency

POSTED

DEADLINE

MIL-SPEC Electrical Component Supply

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Manufacture of Electrical Contact Brush Holders (NSN 5977-00-912-1970)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Electrical Receptacle Connector (NSN 5935-01-375-2421)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Power Supply Units (PN: 6130-01-720-7105)

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS