Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Threaded Pin Rivets (NSN 5320-00-765-4221)

Active

Federal

Response Deadline10/15/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture or sourcing of 58 threaded pin rivets, specifically proprietary part number GB511D6-6, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The deliverables must be shipped to the DLA Distribution Depot at Hill AFB. All materials are required to comply with the Buy American Act and the Berry Amendment to ensure domestic sourcing standards are met. Strict quality and logistical standards apply to this order, requiring inspections performed according to SAE AS9003 or ISO 9001. Packaging must adhere to ASTM D3951 and RP001 specifications, while all shipments must be marked in accordance with MIL-STD-129. The contract falls under NAICS code 332510 and is managed by the Department of Defense.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332510 - Hardware Manufacturing

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-0760.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PIN-RIVET

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 7

subcontract

Response DeadlineOct 15

Submission deadline

Response Deadline

10/15/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies threaded pin rivets for prime contractors delivering DLA supply contracts. Manufactures or sources proprietary part number GB511D6-6. Performs quality inspection per SAE AS9003 or ISO 9001, packages per ASTM D3951 and RP001, and marks shipments per MIL-STD-129. Materials must comply with Buy American Act and Berry Amendment. Delivers 58 units of threaded pin rivets to DLA Distribution Depot at Hill AFB.

Similar Contracts

Same NAICS industry code

FACE ASSEMBLY,SPLIT

Solicitation # N0010427QJA09

Solicitation N0010427QJA09 is a fixed-price request for quotations issued by the Navsup Weapon Systems Support Mech for the teardown, evaluation, repair, and potential modification of the Face Assembly, Split (NSN 5340-01-507-1249). The government is seeking a Repair Turnaround Time (RTAT) of 86 days, measured from the physical receipt of the asset at the contractor facility to final government acceptance. All freight is FOB Origin and handled by the Navy via the Commercial Asset Visibility (CAV) system. The contract includes an option for increased quantity up to 100 percent of the initial requirement. Key requirements include mandatory Government Source Inspection (GSI) and strict adherence to MIL-STD-130 for physical identification and MIL-STD-2073 for packaging. Contractors must report all transactions in the CAV system within five business days of receipt. Failure to meet the established RTAT may result in price reductions per unit per month, implemented via reconciliation modifications. Evaluation of offers will consider supplier performance risk through the Supplier Performance Risk System (SPRS), with a preference for U.S.-made or qualifying country end products. Invoicing must be processed electronically through Wide Area Workflow (WAWF).

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

Sleeve Bearing Manufacturer (NSN 3120009501910)This subcontract involves the manufacture and supply of six sleeve bearings, identified by NSN 3120009501910, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The production must strictly adhere to the DLA Master List of Technical and Quality Requirements, utilizing a zero-based sampling plan in accordance with MIL-STD-1916 or ASQ H1331. Additionally, the manufacturer must ensure all hardware is mercury-free and compliant with domestic sourcing regulations. The completed bearings are to be delivered FOB Origin to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. This requirement falls under NAICS code 332510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 15, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Grooved, Headed Pins (NSN 5315017238982)This subcontract involves the supply of specialized grooved, headed pins for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The required hardware must match NSN 5315017238982 and McMaster-Carr part 92735A480. The contract mandates strict adherence to quality sampling standards per MIL-STD-1916 or ASQ H1331, with packaging and marking requirements following MIL-STD-2073-1E and MIL-STD-129. All materials provided must comply with the Buy American Act and the Berry Amendment. The scope of work requires the delivery of two completed pins FOB Origin to Albany, Georgia. This opportunity falls under NAICS code 332510, with a response deadline set for October 15, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Straight Headed Pin (NSN 5315-01-043-4188)This subcontract involves the manufacture and supply of straight headed pins (NSN 5315-01-043-4188) for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider must utilize precision machining equipment to fabricate pins that adhere strictly to government specifications and the DLA Master List of Technical and Quality Requirements. All materials used in production must be compliant with the Buy American Act and the Berry Amendment. Performance of the contract will take place in Texarkana, Texas. The provider is responsible for ensuring that each completed pin is packaged and labeled in accordance with MIL-STD-129 and RP001 standards. This opportunity falls under NAICS code 332510 and was posted on October 7, 2026, with a response deadline of October 15, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of Single Leg Wire Rope AssembliesThis subcontract involves the manufacture and supply of three single leg wire rope assemblies for the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for fabricating the assemblies according to NSN 4010-01-707-2675 and DLA Master List requirements using industrial swaging and crimping equipment. All deliverables must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. Strict compliance is required regarding the Buy American Act and the Berry Amendment. Additionally, the provider must hold ITAR/EAR authorization and certification under the US/Canada Joint Certification Program. The performance of this contract is centered in New Cumberland, Pennsylvania, with a response deadline of October 15, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacturer of Plug Buttons (NSN 5340-00-634-7276)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supplier of Tapered Roller Bearings (NSN 3110150011119)This subcontract involves the supply of 17 tapered roller bearings to prime contractors supporting the DLA Weapons Support Land Supply Chain. The required components must match NSN 3110150011119 and Iveco Defence Vehicles S.p.A. part number 504336997. Delivery is set as FOB Origin, with the place of performance located in Albany. The supplier is responsible for strict adherence to military standards for preservation, packaging, and marking, specifically MIL-DTL-197M, MIL-STD-129, and MIL-STD-2073-1E. Additionally, quality assurance must be maintained in accordance with MIL-STD-1916 or ASQ H1331. The opportunity falls under NAICS code 332510 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Tapered, Threaded Pins (NSN 5315012593819)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Hardware Manufacturing (Collar, Pin-Rivet)This subcontract involves the manufacture and supply of 15 precision-machined pin-rivet collars for the Department of Defense, specifically under the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating components according to NSN 5320-01-183-0574 specifications, ensuring all items undergo quality inspection per MIL-STD-1916 or ASQ H1331. Final products must be packaged in accordance with ASTM D3951 and MIL-STD-129 standards for delivery to DLA Distribution New Cumberland. The project falls under NAICS code 332510 and requires strict adherence to precision machining and military-grade quality control protocols.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of Hand Cranks (NSN 5340016237876)This subcontract involves the manufacture and supply of 106 hand cranks, identified as NSN 5340016237876 and part number 1103-1945-01, for prime contractors supporting the DLA Weapons Support Land Supply Chain. All units must be produced in strict accordance with the DLA Master List of Technical and Quality Requirements RA001, with a specific prohibition against the use of additive manufacturing. The contractor is responsible for packaging the units according to ASTM D3951 and MIL-STD-129 standards. Once finished and labeled, the 106 hand cranks must be delivered to DLA Distribution in New Cumberland, Pennsylvania. This effort falls under NAICS code 332510 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Sling Hardware and Component SupplyThis subcontract opportunity, titled Sling Hardware and Component Supply, involves providing raw materials and hardware components to prime contractors supporting DLA Troop Support supply contracts. The scope of work specifically requires the sourcing of hooks, rings, and shackles that adhere to the dimensions and strength ratings specified in Drawing NR 53711 6213844. To ensure quality and compliance, the selected provider must maintain JCP certification for technical data access and deliver full material certifications for all supplied components. Managed by the Department of Defense under NAICS code 332510, this is a Total Small Business Set-Aside contract. The place of performance is located in Tracy, California. Interested parties must respond by October 14, 2026, to be considered for the delivery of these certified hardware components.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Pintle Tee Hinge Manufacturing and SupplyThis subcontract involves the manufacturing and supply of 294 pairs of Pintle Tee Hinges for prime contractors supporting the DLA Weapons Support Land Supply Chain. The hinges must be fabricated from zinc-plated wrought steel in accordance with ANSI/BHMA A156.20 standards. Quality control requires the implementation of zero-based sampling per MIL-STD-1916 or ASQ H1331, with packaging and marking adhering to ASTM D3951 and MIL-STD-129. The contractor must ensure full compliance with the Buy American Act and the Berry Amendment. Completed goods are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026, under NAICS code 332510.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Solicitation # SPE4A6-27-R-X023

POSTED

about 2 hours ago

DEADLINE

RIB, STIFFENER, AIRCRAFT

Solicitation # SPE4A6-27-Q-0054

POSTED

about 2 hours ago

DEADLINE

CABLE ASSEMBLY, POWER, ELECTRICAL

Solicitation # SPE4A6-27-R-X042

POSTED

about 2 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on projects for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work involves providing specialized military-grade packaging and marking for bearings to ensure they are ready for FOB Origin shipment. All services must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards, utilizing specific preservation, wrapping, and cushioning materials designated as MAT:49, MAT:E4, and MAT:N4. The performance of this contract will take place in Tracy, California, under NAICS code 488510. Interested parties should note that the solicitation was posted on October 7, 2026, with a response deadline of October 15, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Mil-Spec Connectors and Wiring for NSN 5995015921674This subcontract involves the supply of military-grade connectors and specialized wiring intended for prime contractors fulfilling DLA supply contracts. The scope of work focuses on delivering raw electrical components and materials that strictly adhere to the technical data specified for NSN 5995015921674. To ensure quality and regulatory compliance, the provider must source raw materials in accordance with the Buy American Act and the Balance of Payments program and provide Certificates of Conformance for all delivered components. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the contract falls under NAICS code 335132. Performance for this agreement is centered in New Cumberland, Pennsylvania. Interested parties must note the response deadline of October 15, 2026, following the posting date of October 7, 2026.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication of six special-purpose electrical cable assemblies for the DLA Weapons Support ASC Commodities Division. The manufacturer must produce the assemblies according to NSN 5995015921674 specifications, utilizing either MIL-STD-1916 or ASQ H1331 sampling plans. Additional requirements include bare item marking per RQ017 and packaging in accordance with MIL-STD-2073-1E. The project is categorized under NAICS code 334419 and will be performed in New Cumberland. To be eligible, the contractor must maintain CMMC Level 2 and NIST SP 800-171 compliance. The response deadline for this opportunity is October 15, 2026.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Supply of Flat Washers (NSN 5310016105846)This subcontract involves the manufacture or procurement of seven specialized flat washers, identified by NSN 5310016105846 and Mil-Mar Century Corp part number 106A0505-2, to support prime contractors on DLA Weapons Support ASC projects. The contract mandates strict adherence to technical standards, including MIL-STD-129 for marking, ASTM D3951 for packaging, and RP001 for palletization. Quality assurance must be maintained through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. The agreement requires full compliance with the Buy American Act and falls under NAICS code 332722. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 15, 2026, to meet the requirements set forth by the Department of Defense DLA Weapons Support ASC Commodities Division.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Aerospace Hardware Finishing and PlatingThis subcontract for Aerospace Hardware Finishing and Plating involves providing specialized surface treatments, plating, and coatings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the application of treatments according to drawing NR 76301 M3463THRU465 using industrial plating or CVD/PVD equipment, with a strict requirement that these processes do not interfere with the self-locking functionality of the finished nut assemblies. To qualify for this project, the contractor must maintain NADCAP accreditation and ensure full environmental compliance. The performance of the contract will take place at Robins Air Force Base, and the final deliverable consists of completed and coated nut assemblies.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Aerospace-Grade Raw Material Supply (Fastener Stock)This subcontract involves the supply of aerospace-grade raw material alloys and metals to prime contractors supporting the Department of Defense, specifically for the DLA Weapons Support ASC Commodities Division. The scope of work requires the delivery of certified raw stock that adheres to the precise chemical and physical properties outlined in drawing NR 76301 M3463THRU465. To ensure quality and regulatory adherence, the provider must maintain full material traceability and provide comprehensive Mill Test Reports. The contract is categorized under NAICS code 332111 and mandates strict compliance with ITAR and EAR regulations for all material handling. Performance for this requirement is centered at Robins Air Force Base. Interested parties must note the response deadline of October 15, 2026, to provide the necessary certified materials for these aerospace projects.

Iron and Steel Forging

POSTED

DEADLINE

Precision Machining and Assembly of Self-Locking Gang Channel NutsThis subcontract involves the precision machining and assembly of six self-locking gang channel nut assemblies for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The work requires manufacturing parts according to drawing NR 76301 M3463THRU465, Revision BC, utilizing precision CNC machining to ensure zero-nonconformance aerospace tolerances for NSN 5310-00-518-5697. Performance will take place at Robins Air Force Base. Due to the nature of the project, the contractor must maintain CMMC Level 2 certification and adhere to the US/Canada Joint Certification Program to ensure full ITAR and EAR compliance. The solicitation was posted on October 7, 2026, with a response deadline of October 15, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Aerospace-Grade Wire and Connector SupplyThis subcontract opportunity, managed by the Department of Defense DLA Weapons Support ASC Commodities Division, seeks a provider for aerospace-grade raw materials, specialized wiring, and connectors. The selected vendor must supply materials that strictly adhere to Reference Drawing NR 53711 6097484 and ensure all components are mercury-free. Essential deliverables include full certification of conformance and mill test reports to verify material integrity. The contract is designated as a Total Small Business Set-Aside under NAICS code 335132, with performance taking place in New Cumberland. Compliance requirements are stringent, requiring adherence to DFARS 252.225-7007 regarding prohibited sources and mandatory approval to handle ITAR and EAR controlled components. Interested parties must submit their responses by October 15, 2026.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS