Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Transmission Seals (NSN 1615011162900)

Active

Federal

Response Deadline10/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of four specialized transmission seals under NSN 1615011162900 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The contractor is responsible for manufacturing or procuring seals that adhere to Boeing Helicopter Co. part number 145DS024-18 and SKF Inc part number 537144. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 333613. Strict compliance with quality assurance and packaging standards is required, specifically MIL-STD-1916 or ASQ H1331 for quality and MIL-STD-2073-1E and MIL-STD-129 for packaging. Additionally, the contractor must possess CMMC Level 2 certification and the capability to handle Controlled Unclassified Information. The response deadline for this opportunity is October 22, 2026.

General Info

Supply four specialized transmission seals for DoD by October 22, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

333613 - Mechanical Power Transmission Equipment Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-1203.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAL, TRANSMISSION

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 22

Submission deadline

Response Deadline

10/22/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized transmission seals for prime contractors delivering DLA supply contracts. Manufactures or procures seals meeting Boeing Helicopter Co. part number 145DS024-18 and SKF Inc (Chicago Rawhide Mfg Co) part number 537144. Performs quality assurance per MIL-STD-1916 or ASQ H1331 and packaging per MIL-STD-2073-1E and MIL-STD-129. Requires CMMC Level 2 and CDI handling capability. Delivers four transmission seals.

Similar Contracts

Same NAICS industry code

MIL-SPEC Packaging and Marking ProviderThis subcontract opportunity is for a MIL-SPEC Packaging and Marking Provider to support prime contractors on projects for the Department of Defense, specifically within the DLA Weapons Support Land Supply Chain. The selected provider will be responsible for performing specialized military-grade packaging and marking, which includes sealing rubber components in medium duty, waterproof, greaseproof, and opaque bags. All work must be executed in strict accordance with MIL-DTL-117, MIL-STD-2073-1E RP001, and MIL-STD-129 to ensure shipments are fully prepared and ready for transport. The project falls under NAICS code 333613 and was posted on October 15, 2026. Interested parties must submit their responses by the deadline of October 22, 2026. This requirement focuses on delivering high-standard, compliant packaging solutions that meet rigorous military specifications for land supply chain logistics.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Thermostatic Switches (NSN 5930-01-284-8772)This subcontract involves the manufacture or procurement of 20 thermostatic switches, identified by NSN 5930-01-284-8772, to support prime contractors on DLA Land and Maritime projects. The Department of Defense Active Devices Division requires all units to be produced in strict accordance with the DLA Master List of Technical and Quality Requirements RA001. Additionally, all materials used must adhere to the regulations set forth by the Buy American Act and the Berry Amendment. The completed switches are to be delivered to the DLA Distribution Depot Oklahoma located at Tinker AFB. This procurement falls under NAICS code 333613, with a response deadline set for October 20, 2026.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on projects for the DLA Weapons Support ASC Commodities Division. The scope of work involves the military packaging and marking of nine units using Unit and Intermediate Container E5, with strict adherence to MIL-STD-129 for marking and RP001 for palletization. A critical safety requirement is the total exclusion of mercury-containing compounds during the preservation process, as mandated by IP056. The completed units must be delivered to DLA Distribution DDSP in New Cumberland. This opportunity is categorized under NAICS code 333613 and was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Machining of Shouldered Shafts (NSN 3040005362481)This subcontract involves the precision machining and fabrication of three shouldered shafts for the DLA Weapons Support ASC Commodities Division, with performance taking place at Tinker AFB. The scope of work requires turning and facing parts to strict technical specifications using CNC equipment, while explicitly prohibiting the use of additive manufacturing. To ensure quality and security, the contractor must implement inspection systems according to ISO 9001:2015 and follow MIL-STD-1916 sampling protocols. Additionally, the provider must maintain Buy American Act compliance and complete a CMMC Level 2 self-assessment. The project is categorized under NAICS code 333613.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports the Department of Defense through the DLA Weapons Support Land Supply Chain. The selected provider will perform specialized military packaging and transport for prime contractors, ensuring all items are packaged according to MIL-STD-2073-1E and palletized in adherence to DLA requirements under RP001. The scope of work requires the use of MIL-SPEC packaging materials and the fastest traceable shipping methods to ensure secure delivery. All packaged and labeled shipments must be delivered to the final destination located in Sault Sainte Marie, Michigan.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Internal Gear Fabrication (RTX PN 161501-1)This subcontract involves the fabrication of two high-precision internal gears for the DLA Weapons Support ASC Commodities Division. The selected manufacturer must perform precision machining and gear cutting in strict accordance with RTX part number 161501-1 and NSN 3020012849998 specifications. Quality assurance is critical, requiring the implementation of zero-based sampling per MIL-STD-1916 or ASQ H1331, with the final delivery consisting of fully inspected and certified components. To be eligible, contractors must maintain ISO 9001:2015 certification and CMMC Level 2 compliance, as the project requires the ability to handle Covered Defense Information. The work is categorized under NAICS code 333613 and will be performed in Cherry Point. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-SPEC Packaging and LogisticsThis subcontract for MIL-SPEC Packaging and Logistics supports prime contractors delivering for the DLA Weapons Support ASC. The selected provider will be responsible for the specialized packaging, marking, and palletization of finished control panels in strict accordance with MIL-STD-129, MIL-STD-2073-1E, and RP001 standards. Beyond packaging, the scope of work includes the secure transportation and delivery of these panels to the DLA Distribution Depot Oklahoma located at Tinker AFB. The opportunity is managed under the Department of Defense with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Hazardous Material Kit Assembly and MIL-SPEC PackagingThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the assembly and packaging of 665 absorbent kits for prime contractors. The scope of work involves assembling kits in cushioned boxes with detailed contents lists, ensuring all deliverables are fully assembled and labeled. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 333613. Strict adherence to military and industry standards is mandatory, including MIL-STD-129 for labels and barcodes, ASTM-D-3951 for packaging, and MIL-STD-2073-1 Appendix D for assembly. The contractor must utilize specialized MIL-SPEC labeling and barcoding equipment to meet these requirements. This opportunity is designated as a Total Small Business Set-Aside with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-SPEC Aerospace Packaging ServicesThis subcontract for MIL-SPEC Aerospace Packaging Services involves providing specialized packaging solutions for prime contractors supporting DLA Weapons Support ASC projects. The scope of work focuses on the construction of custom crates and the application of precise markings for critical aerospace radomes, ensuring full compliance with MIL-STD-129 and ASTM D3951 standards. To prevent component deformation, the contractor must implement custom cushioning and moisture barriers, delivering a fully packaged and labeled product ready for shipment. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in New Cumberland, Pennsylvania. Identified by NAICS code 333613, the opportunity was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing specialized military-grade packaging, marking, and palletization services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The scope of work requires the cleaning and drying of parts, packaging according to MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. The specific deliverable consists of 12 retaining rings prepared for FOB Origin shipment to DLA Distribution San Diego. The project is categorized under NAICS code 333613 and will be performed in San Diego, California. Interested parties should note the response deadline of October 23, 2026, for this military specification service requirement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

MIL-SPEC Electrostatic/EMI Packaging SupplierThis subcontract involves providing specialized packaging services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Active Devices Division. The scope of work focuses on the critical packaging of electronic components and microcircuits to ensure they are ready for shipment to DLA Distribution DDWO. All work must strictly adhere to military specifications, including MIL-STD-2073-1E for general packaging, MIL-PRF-81705 for electrostatic discharge and electromagnetic interference protection using conductive foam and anti-static bags, and MIL-STD-129 for marking and labeling. The project is categorized under NAICS code 333613 and will be performed in Columbus, Ohio. Interested parties should note that the response deadline is October 26, 2026. The primary objective is the delivery of fully compliant, protected, and marked components that meet rigorous defense standards for sensitive electronic hardware.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Spur Gearshaft Fabrication (NSN 3040004116828)This subcontract involves the precision machining and manufacturing of two spur gearshafts for the DLA Weapons Support Land Supply Chain. The scope of work requires the execution of gear cutting and hobbing for spur gear profiles under NSN 3040004116828, utilizing CNC gear hobbing and precision grinding equipment. Quality assurance must be maintained through adherence to MIL-STD-1916 or ASQ H1331 sampling methods. To be eligible, the contractor must hold ISO 9001:2015 certification and meet CMMC Level 2 requirements. The project is categorized under NAICS code 333613, with the place of performance located at Hill AFB. Responses are due by October 26, 2026, for the delivery of the two completed gearshafts.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

PIN, QUICK RELEASE

Solicitation # SPE4A7-27-Q-0090

POSTED

DEADLINE

Solicitation # SPE4A7-27-Q-0084

POSTED

DEADLINE

in about 24 hours

COVER, PILOT AND SHU

Solicitation # SPE4A7-27-R-0034

This unrestricted pre-solicitation issued by DLA Aviation is for an Indefinite Quantity Contract to procure Pilot and SHU Covers for the F-15, identified by NSN 1650-003216273 and part number 86065 from Hydro-Aire Aerospace Corp. The contract features a base period of two years with no additional options and an estimated annual requirement of 40 units. Production units are subject to a delivery timeline of 280 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The solicitation is scheduled for release on or about October 16, 2026, and will be available exclusively through the DLA Internet Bid Board System. Interested parties must submit their responses by the deadline of November 11, 2026. This procurement falls under NAICS code 336413 and is managed by the Department of Defense office located in Richmond, Virginia.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A7-27-Q-0089

POSTED

DEADLINE

CELL ASSEMBLY, OPTICAL INSTRUMENT

Solicitation # SPE4A7-27-R-X002

This presolicitation, issued by DLA Aviation under solicitation number SPE4A7-27-R-X002, is for a long-term indefinite delivery contract for Optical Cell Assemblies. The requirement covers NSN 5855-01-442-6413, part number 268788, with an estimated annual quantity of 860 units. The contract structure includes five one-year base periods, with delivery locations set for New Cumberland, PA, and Tracy, CA. The procurement is unrestricted and conducted as other than full or open competition. While certified cost and pricing data are not required, a subcontracting plan is mandatory, and surplus materials will not be accepted. Award decisions will be based on a combination of price, past performance, and other evaluation factors. The full solicitation will be available via DLA DIBBS starting October 16, 2026, with a response deadline of November 16, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

in about 1 month

WINDSHIELD PANEL, AIRCR

Solicitation # SPE4A7-27-Q-0095

POSTED

DEADLINE

COLLAR, PIN-RIVET

Solicitation # SPE4A7-27-Q-0093

POSTED

DEADLINE

Solicitation # SPE4A7-27-Q-0091

POSTED

DEADLINE

61--DISTRIBUTION BOX

Solicitation # SPE4A7-27-T-1477

Solicitation SPE4A7-27-T-1477 is a fixed-price request for the procurement of one distribution box, identified by NSN 6110-01-674-3749 and RTX Corporation part number 104024-0A. The requirement is issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for delivery to the Fleet Readiness Center East in Cherry Point, North Carolina. The delivery timeline is specified as five days after receipt of order, with an original required delivery date of October 9, 2026. Shipping is designated as FOB Origin, and both inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements via the DLA Master List, with packaging and marking governed by MIL-STD-2073-1E and MIL-STD-129. Palletization must follow RP001 standards. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and submission of all quotes via the DLA Internet Bid Board System. The procurement is subject to the Buy American Act, the Berry Amendment, and specific cybersecurity standards under DFARS 252.204-7012. This acquisition is categorized under NAICS code 335312 and may be eligible for automated award.

Motor and Generator Manufacturing

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and Fulfillment ServicesThis subcontract for MIL-SPEC Packaging and Fulfillment Services supports the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project requires specialized military packaging, marking, and cushioning for prime contractors, with strict adherence to MIL-STD-2073-1 Appendix D and MIL-STD-129 for bar-coding and marking. The scope of work involves using military-grade labeling equipment and MIL-SPEC cushioning to produce 354 individually packaged kits, each including a detailed contents list, prepared for FOB Origin shipment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 493110, with performance taking place in New Cumberland, Pennsylvania. Interested parties must respond by October 23, 2026.

General Warehousing and Storage

POSTED

DEADLINE

Supplier of Radio Frequency Cable Splicing KitsThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, requires the procurement of 354 Radio Frequency Cable Splicing Kits. The specific requirement is for part number 10-06950 from manufacturer Infinite Electronics International, Inc., corresponding to NSN 5975-01-611-7015. All units must be delivered to DLA Distribution DDSP in New Cumberland, Pennsylvania. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 423610. Awardees must ensure strict compliance with the Buy American and Balance of Payments Program, as well as DFARS prohibitions regarding covered defense telecommunications equipment. The response deadline for this solicitation is October 23, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing specialized packaging and shipping services, specifically requiring components to be packaged according to ASTM D3951 and marked and labeled in compliance with MIL-STD-129 and RP001 DLA Packaging Requirements. The contractor will utilize industrial palletization and MIL-SPEC crating to deliver packaged assemblies FOB Origin to DLA Distribution Cherry Point. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 488510 for the Department of Defense. Performance will take place in Cherry Point, North Carolina. Interested parties must respond by October 23, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS