Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Tuberculin (PPD) for Tuberculosis Testing

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 1

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of 1 unit of Tuberculin (NSN: 6505001050102), a sterile solution used for intradermal TB testing, compliant with FDA and DoD standards, shipped to a military FPO address.

Similar Contracts

Same NAICS industry code

OMEPRAZOLE EXTENDED-RE

Solicitation # SPE2DP-26-T-4416

The contract specifies the procurement of 20 mg extended-release omeprazole capsules in 90-count bottles, identified by NSN 6505016247068 and manufacturer part number NDC00781-2868-92 from Sandoz Inc. Each unit must be packaged in commercial-grade sealed containers that protect against damage, with outer shipping containers ensuring safe, low-cost delivery to listed government destinations under FOB destination terms. A minimum of 21 months of shelf life must remain at delivery, with a total shelf life of 24 months that is non-extendable. All packaging, labeling, and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement. The product is regulated by the FDA and requires pre-award referral for confirmation. Shipments must use traceable transportation methods and explicitly prohibit parcel post. Deliveries are scheduled across multiple CLINs totaling 57 units, with a mandatory delivery window of five days and no variance allowed in quantity. All items must be labeled and stored at controlled room temperature, with packaging materials and methods governed by DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951. Shipping addresses include military facilities at Fort Bragg, North Carolina, and APO AP, with required point-of-contact and program tracking information provided for government use.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 3 hours ago

DEADLINE

SURGICAL PACK, DISPOSAB

Solicitation # SPE2DH-26-T-5695

The contract specifies the procurement of a disposable surgical pack containing one drape towel with adhesive, one lithotomy sheet with attached legging, two absorbent towels, and one reinforced plastic outer wrap or table cover measuring 44 inches by 90 inches, all packaged as a unit of issue consisting of ten each per package. Two such packages are required under purchase request 7017656189 for delivery within 20 days of award. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a container that safeguards contents from damage and breakage, and shipped in robust exterior containers suitable for safe delivery by common carriers at the lowest possible rate to the specified delivery point in APO, 09094-3219. Marking must adhere strictly to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support or online. The solicitation is governed by DLA Packaging Requirements and incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. This is a federal solicitation under NAICS code 423450 issued by the Department of Defense’s Medical Supply Chain FSH, with responses due by August 10, 2026, and technical inquiries directed to Tina Vu.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 3 hours ago

DEADLINE

SODIUM CHLORIDE INJ

Solicitation # SPE2DP-26-T-4446

Sodium Chloride Injection in 10 mL disposable syringes, preservative-free and latex-free, is being procured under contract SPE2DP-26-T-4446 with a total quantity of 2 packing groups, each containing 30 syringes for a total of 60 units. The product is regulated by the FDA and must comply with all applicable DLA Master List of Technical and Quality Requirements, including medical packaging and marking standards as defined in Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial grade, sealed to prevent damage or breakage, and placed in exterior shipping containers suitable for safe transport at the lowest carrier rate to the designated delivery point. The item has a non-extendable shelf life of 24 months and must be labeled accordingly. Delivery is FOB destination within 20 days of award, with no tolerance for quantity variance. Freight must be shipped by traceable means, excluding parcel post, to the specified delivery location at Watervliet Arsenal, New York. The supplier, AmerisourceBergen Drug Corp with part number 106346, must adhere to all applicable hazardous material guidelines under Fed-Std-313 and ASTM D3951 where relevant, though DLA requirements override any conflicting standards. All packaging, labeling, and palletization must conform to RP001 and the latest DLA packaging directives.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 3 hours ago

DEADLINE

TABLE, SURGICAL INST

Solicitation # SPE2DH-26-T-5733

The contract specifies the procurement of two surgical anesthesia utility tables, each with a single drawer made of stainless steel, rectangular in shape, measuring 20 inches in width, 16 inches in depth, and 34 inches in height, equipped with 3-inch wheel casters. These units are destined for federal medical use under the NSN 6530-00-710-0220 and must be delivered within 170 days of award. Packaging requirements are strictly defined: each unit must be sealed in a commercial container that prevents damage or breakage, with exterior shipping containers compliant with commercial standards and capable of safe transport at the lowest cost to the delivery point in New Cumberland, PA. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must clearly indicate the source and part number being supplied. The contract references DLA’s Master List of Technical and Quality Requirements, indicating adherence to specific technical and quality criteria identified by R or I numbers, and incorporates DLA’s packaging guidelines. Government identification must be removed from non-accepted supplies, and all bids must respond to the solicitation number SPE2DH-26-T-5733 with full compliance to the stated procurement rules and deadlines.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 3 hours ago

DEADLINE

TOLNAFTATE CREAM

Solicitation # SPE2DP-26-T-4443

Tolnaftate Cream USP, a 1% weight/weight topical antifungal cream, is being procured in 15-gram tubes (TU), with a total quantity of 18 tubes required for delivery. The product has a 36-month shelf life, and at the time of receipt by the first government activity, a minimum of 31 months of remaining shelf life must be guaranteed. It must be stored at controlled room temperature between 20–25°C (68–77°F), with allowable excursions permitted between 15–30°C (59–86°F) in accordance with USP standards. The manufacturer is Taro Pharmaceuticals U.S.A., Inc., identified by NDC 51672-2020-01, and the item is regulated by the FDA, requiring confirmation through the EBS referral process. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must be commercially packaged in sealed unit containers suitable for protection against damage, with exterior shipping containers ensuring safe, cost-effective delivery. All packaging and labeling must adhere to DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951. The product is not considered hazardous under FED-STD-313 and must be shipped via the fastest traceable means, excluding parcel post, to Fort Lewis, WA, with a required delivery within five days of the award. The contract specifies zero variance in quantity, destination FOB delivery, and inspection and acceptance at the delivery point. The NSN is 6505-01-571-5622, and the solicitation number is SPE2DP-26-T-4443, with a response deadline of August 10, 2026.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 3 hours ago

DEADLINE

BAG, STERILIZATION-BIOH

Solicitation # SPE2DH-26-T-5714

The contract specifies the procurement of heavy-duty, puncture-resistant biohazard disposal bags colored red or orange to indicate contamination, designed for autoclaving biologically contaminated materials such as culture dishes prior to disposal. Each package contains 200 units, with the unit of issue listed as a package. The items must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, and packaging must adhere to commercial standards as specified in the procurement document, superseding MIL-STD-129 in favor of Medical Marking Standard No. 1. Each unit must be sealed in a container that prevents damage or breakage, and shipments must be packed in commercial exterior containers capable of safe delivery via common carriers at the lowest cost to the designated delivery point. Marking must follow Medical Marking Standard No. 1, and all packaging and handling must meet MIL-STD-2073-1E specifications. The contract calls for delivery of one package within 20 days FOB destination, with no tolerance for quantity variance, and inspection and acceptance occurring at the delivery point. The solicitation number is SPE2DH-26-T-5714, issued by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 10, 2026, and an original required delivery date of August 4, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 3 hours ago

DEADLINE

METER, CONDUCTIVITY

Solicitation # SPE2DH-26-T-5700

A portable conductivity meter with solid-state construction and built-in electrodes is being procured under solicitation SPE2DH-26-T-5700, with a requirement for three units. The device measures 3 inches wide, 5 inches in diameter, and 4 inches high, and includes a carrying case for transport and field use. It is designed for testing water purified through deionization, osmosis, boiler systems, and highly saline wastewater. The procurement is governed by technical and quality requirements from the DLA Master List, with applicable revisions determined by the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The unit of issue is each, and bidders must clearly identify the source and part number being offered. The NSN is 6630-01-188-5368, with a delivery deadline of 20 days after award. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. The contracting activity falls under the Department of Defense, Medical Supply Chain FSH, with performance to be delivered to FPO, ZIP 96678, and primary point of contact is Tina Vu via email and phone provided.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE2DH-26-T-5726

The contract is for disposable, latex-free exam shorts in dark blue, made from non-woven material with a sewn-in elastic waistband that expands from 22 to 48 inches to accommodate most patients. Each unit is sold in a package of 50, with the unit of issue defined as one package. All packaging must comply with commercial standards and meet the Medical Marking Standard No. 1, which replaces MIL-STD-129, ensuring proper identification and handling throughout the supply chain. Units must be sealed in protective containers and packed in suitable exterior shipping containers to ensure safe delivery at the lowest carrier rate to the designated point of performance at Edwards AFB, California. The material must be marked according to MMS No. 1, and full compliance with DLA packaging requirements is mandatory. This acquisition falls under the NAICS code 423450 and is managed by the Department of Defense’s Medical Supply Chain FSH, with the solicitation number SPE2DH-26-T-5726, issued on August 2, 2026, and requiring responses by August 10, 2026. Delivery is due within 20 days after award, and the item is identified by NSN 6532-01-532-8007. Technical and quality requirements are governed by the DLA Master List, and removal of government identification from non-accepted supplies is regulated under RQ011. Contact for inquiries is Tina Vu at Tina.Vu@dla.mil.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 3 hours ago

DEADLINE

TRIAMCINOLONE ACETO

Solicitation # SPE2DP-26-T-4442

Triamcinolone acetonide cream USP 0.1% is a prescription-only topical medication supplied in 80-gram tubes, with a total shelf life of 36 months and a requirement that at least 31 months of shelf life remain upon receipt by the first government activity. It must be stored at controlled room temperature between 20–25°C (68–77°F), with allowable excursions between 15–30°C (59–86°F) in accordance with USP standards. The product is subject to stringent FDA regulation and must comply with all DLA Master List of Technical and Quality Requirements, including packaging and labeling standards per Medical Marking Standard No. 1, which replaces MIL-STD-129. Each unit must be commercially packaged in sealed containers to prevent damage, and bulk shipments must be palletized per DLA procurement guidelines. The item is regulated as a Type I (Code Q) drug with a non-extendable 36-month shelf life, and all packaging must be marked in accordance with applicable defense information and hazardous material requirements if applicable. The contract specifies delivery of 16 tubes to Fort Lewis, Washington, with a required delivery date of August 4, 2026, within five days of shipment, using the fastest traceable means excluding parcel post. Supplier information includes NDC codes for Sandoz, Tarro Pharmaceuticals, and AmerisourceBergen, and the unit of issue is a tube (TU). Pricing is fixed at $16.00 per tube with zero variance allowed in quantity.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 3 hours ago

DEADLINE

DISPOSAL CONTAINER, HYP

Solicitation # SPE2DH-26-T-5713

The contract specifies the procurement of a puncture-resistant, autoclavable, red plastic disposal container designed for single-use hypodermic needles and syringes, with a nominal capacity of 3.3 quarts and featuring a one-way valve and venting system, clearly labeled with the infectious waste symbol and cautionary legends. Each unit must be commercially packaged in a sealed inner container to prevent damage or breakage and shipped in suitable exterior containers that ensure safe, cost-effective delivery via common carrier to the designated destination, adhering to the Medical Marking Standard No. 1, which replaces all references to MIL-STD-129. The packaging and marking requirements are strictly defined, and the item must be labeled in compliance with these standards, with guidance accessible through DLA Troop Support. The unit of issue is one PG, equivalent to 24 units, and the item is identified by NSN 6530-01-188-5345 and manufacturer part number 305488 from Becton, Dickinson and Co. Delivery is required within 20 days FOB destination, with no quantity variance permitted, and inspection and acceptance occur upon arrival. The product is regulated by the FDA, and buyers must submit a referral through EBS for confirmation prior to award. The sourcing is governed by DLA packaging requirements and technical standards outlined in the DLA Master List of Technical and Quality Requirements, and the contract is governed by covered defense information protocols. The delivery point is Fort Hood, Texas, with the point of contact for inquiries being Tina Vu of the Department of Defense Medical Supply Chain FSH.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 3 hours ago

DEADLINE

Supply of Sickle Cell Diagnostic ReagentsThe contract encompasses the procurement and delivery of specialized medical reagents required for sickle cell disease testing at the Sickle Cell Laboratory in Mandeville, Jamaica. The scope includes full packaging and labeling of reagents in compliance with established diagnostic standards to ensure accuracy, safety, and regulatory adherence in clinical testing environments. All materials must be suitable for routine use in a laboratory setting and meet the technical and quality benchmarks necessary for reliable diagnosis of sickle cell conditions. The supplier is responsible for end-to-end fulfillment including transportation and documentation to guarantee timely and defect-free delivery. The contract is classified as a subcontract under NAICS code 423450, indicating it relates to medical and dental equipment and supplies merchant wholesaling. It is issued by the Southern Regional Health Authority, operating under the Government of Jamaica, with performance required exclusively at the designated laboratory in Mandeville. The posting date indicates this opportunity was made public in July 2026, though no solicitation number is listed. There is no set-aside designation or details provided regarding eligibility criteria or point of contact, and the agreement underscores the importance of reliability and regulatory compliance in supporting national public health initiatives for sickle cell disease screening and management.

Southern Regional Health Authority

POSTED

DEADLINE

OMEPRAZOLE EXTENDED-RE

Solicitation # SPE2DP-26-T-4251

OMEPRAZOLE EXTENDED-RELEASE CAPSULES, 20 MG DELAYED RELEASE, in 90-count bottles, are being procured under solicitation SPE2DP-26-T-4251 by the Department of Defense’s Medical Supply Chain Pharm FSA. The item is regulated by the FDA and must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over all other packaging standards. Each unit is defined by the unit of issue “BT,” representing 90 capsules per bottle, with all deliveries required to have at least 21 months of remaining shelf life out of a 24-month total shelf life, non-extendable. Packaging must protect against damage and be commercially sealed, with exterior shipping containers suitable for safe transport via common carrier at lowest cost. Palletization must adhere to RP001 DLA Packaging Requirements, and all labeling and marking must follow MIL-STD-129 as the governing standard, superseding references to MIL-STD-129. Markings must include Unit of Issue, Quantity per Unit Pack, freight and mark-for addresses, and traceable identifiers. Parcel post is explicitly prohibited, and shipments must be sent via the fastest traceable means. All items are to be delivered FOB destination within five days of award, with delivery points at Fort Stewart, GA, and Fort Campbell, KY. The contract includes five CLINs totaling 15 BT (1,350 capsules), with no variance allowed in quantity. The drug is supplied by Sandoz Inc., with NDC 00781-2868-92. Technical compliance is enforced through the DLA Master List, which governs all quality and packaging specifications. The product is non-hazardous under FED-STD-313 and must conform to ASTM D3951 for commercial packaging, unless a deviation applies, in which case TQ IP025 governs. All contractors must comply with FAR/DFARS clauses requiring cybersecurity protections under 252.204-7012 and NIST SP 800-171, safeguarding covered defense information and reporting cyber incidents. Contractors must also adhere to whistleblower protections, trafficking in persons prohibitions, employment verification requirements, and sustainable product preferences. Proposal submissions are exclusively through the DLA Internet Bid Board System (DIBBS) by the deadline of July 29, 20

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

HOUSING, LATCH PAN A

Solicitation # SPE8E5-26-T-3746

The contract is for one unit of a Housing, Latch Pan Assembly identified by part number 5599908-19 and NSN 5411-01-375-3695, with a requirement for delivery within 20 days after award. The item is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through an accredited third-party assessment organization, and packaging must adhere to DLA-specific guidelines. The supply is classified as covered defense information and is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. entities. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the technical data. The solicitation number is SPE8E5-26-T-3746, issued on August 2, 2026, with responses due by August 13, 2026, under NAICS code 331315, and performance is designated for FPO with ZIP 96667. The primary point of contact is Don Trachtman, reachable via email and phone provided, and the contract is managed by the Defense Logistics Agency under the Department of Defense.

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 3 hours ago

DEADLINE

NOZZLE, FIRE EQUIPME

Solicitation # SPE8E6-26-T-3955

The contract pertains to the procurement of a single nozzle for fire equipment, identified by NSN 4210-01-658-7880 and part number 05000542, with a required delivery of five days from the date of award. The item is to be shipped FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s master list of technical and quality requirements, prioritizing those referenced by R or I numbers over general standards like ASTM D3951. If the item is non-hazardous per Fed-Std-313, it must be commercially packaged in accordance with ASTM D3951 but fully aligned with DLA’s superior specifications, including labeling and marking per MIL-STD-129 and palletization per RP001. Hazardous materials must meet TQ requirement IP025. The unit of issue is each, and one unit is ordered under purchase request 7017689821. Delivery must be made via the fastest traceable means, explicitly prohibiting parcel post, and shipped to the designated DLA retail facility in Albany, Georgia. The original required delivery date is August 4, 2026, and the contract was solicited under SPE8E6-26-T-3955 with a response deadline of August 13, 2026. All technical and quality compliance is governed by the DLA Master List in effect at the time of award, and the contracting officer is John Lieb of the Defense Logistics Agency.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

PRIMER, SEALING COMP

Solicitation # SPE8ES-26-T-2485

The contract specifies the procurement of one unit of PRIMER, SEALING COMP with NSN 8030-01-672-0817 under solicitation SPE8ES-26-T-2485, issued by the Defense Logistics Agency. Delivery is required within 20 days to a designated military installation in Vallejo, California, with FOB destination terms and zero variance allowed in quantity. The item is classified as a TYPE I (CODE M) shelf-life item with a non-extendable 24-month shelf life, and all packaging, marking, and shipping must comply with MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements. Hazardous materials protocols must be followed per IP025, and shipment must be traceable, excluding parcel post. The item is subject to the Defense Federal Acquisition Regulation Supplement, including requirements for hazardous communication, government information handling, and technical quality standards referenced through R-numbers. Packaging and storage must maintain temperatures between -10°F and 110°F, with specific packaging methods and codes applied. The supplier must be the Industries for the Blind & Visually Impaired, identified by P/N 7XM97, and all documentation must reflect revision standards including MIL-STD-129R, MIL-STD-147F, and FED-STD-313F. The item is for government use only, with the designated point of contact and delivery instructions clearly outlined, including the freight address and mandatory marking code 32 for shelf-life compliance.

Adhesive Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E7-26-T-3451

The contract pertains to the procurement of 10 units of LIGHT,DOME with NSN 6220-01-706-9275 under solicitation SPE8E7-26-T-3451, issued by the Defense Logistics Agency. Delivery is required within 20 days of award, with FOB origin terms, and inspection and acceptance occur at the destination. The item must be packaged in full compliance with DLA packaging requirements, specifically RP001, and labeled per MIL-STD-129. If not classified as hazardous under FED-STD-313, it must be commercially packaged according to ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence over any commercial standards. The packaging must adhere to specified Unit of Issue and Quantity per Unit Pack, with palletization following DLA guidelines. The delivery destination is FB5682 at Cargo Movement Element Building 1029 in Aviano, Italy, with transportation governed by DLAD procedural notes C19 and C20. The contract includes strict quantity variance limits of zero percent, meaning no over or under shipment is permitted. All documentation, including technical and quality requirements referenced by R or I numbers, is governed by the DLA Master List, with revision control tied to the solicitation issue date. The item is identified by multiple revision levels of technical data packages referencing drawing numbers 78286 and 78550-02801, and must be marked and traceable as specified. The point of contact is Kelly Mitchell, and the order is tied to project ACV TP 3 with government-only identifiers for tracking and disposition.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

BATTERY, NONRECHARGEABL

Solicitation # SPE7L7-26-T-4530

The contract specifies the procurement of a single non-rechargeable battery with NSN 6135-01-592-8698 and part number 11141-000100, supplied by Physio Control Corp, under solicitation SPE7L7-26-T-4530. The battery must meet a Type I shelf life of 60 months with no extension permitted, and it is subject to strict packaging, marking, and shipping requirements per MIL-STD-2073-1E and MIL-STD-129, including specialized packaging codes and hazardous material handling protocols. The item is classified as commercial off-the-shelf with adequate catalog data available, and mercury or mercury compounds are strictly prohibited except in functional components such as batteries, fluorescent lamps, or sensors as defined by NAVSEA, requiring secondary containment for mercury-containing portable devices. Sampling and quality verification are governed by MIL-STD-1916 or equivalent zero-based plans with acceptance criteria of zero non-conformances unless otherwise specified, and critical attributes are assigned verification levels or AQLs accordingly. Delivery is required FOB destination within five days of contract award, with inspection and acceptance also occurring at the destination. The sole delivery point is Fort Bragg, North Carolina, and shipments must be traceable via expedited means, excluding parcel post. All packaging and marking must align with DLA’s standardized requirements, and the contract enforces compliance with hazardous communication standards and the DLA Master List of Technical and Quality Requirements referenced via official online portals. The contract was posted on August 2, 2026, with a response deadline of August 13, 2026, and the original delivery date is July 24, 2026.

Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

HEATING BLANKET, ELE

Solicitation # SPE8E8-26-T-4934

The contract is for one electric heating blanket with NSN 4520017068008 and part number TW 026 000, issued by the Defense Logistics Agency under solicitation SPE8E8-26-T-4934. Delivery is required within 20 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and, more importantly, all DLA Master List of Technical and Quality Requirements, with labeling and marking per MIL-STD-129. Palletization must follow DLA packaging guidelines, and traceable freight shipping is mandatory—parcel post is prohibited. The delivery address is the 7th ESB at Camp Pendleton, CA, with a freight shipping point and a designated military freight control number. The original required delivery date is July 14, 2026, and the item is classified under NAICS code 333414 for heating equipment manufacturing. Government-specific identifiers are included for internal tracking, including IPD, DIC, and FC codes, and the contract references applicable technical standards and restricted information handling under RD003. All requirements supersede general commercial practices and must be strictly adhered to by the supplier.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 3 hours ago

DEADLINE

MARKER, IDENTIFICATI

Solicitation # SPE8E6-26-T-3954

This contract issued by the Defense Logistics Agency under solicitation number SPE8E6-26-T-3954 specifies the procurement of two units of a marker identified by NSN 7690-01-675-6387 and part number DBC-K0P-STK-DNP, with a total price of $2.00 per unit. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and both inspection and acceptance occur at the delivery point. The item is classified as a Type I shelf-life item with a non-extendable 12-month expiration period, and special marking code 32 must be applied in compliance with MIL-STD-129. Packaging must adhere strictly to MIL-STD-2073-1E and DLA packaging requirements, while avoiding plastic materials for wrapping, cushioning, or dunnage wherever possible. The item must be palletized per RP001 specifications, and shipment must be made by the fastest traceable means; parcel post is prohibited. Delivery is directed to USS GUNSTON HALL LSD 44 at FPO AE 09573, with transportation logistics referencing DLAD procedural notes C19 and C20. The original required delivery date is July 29, 2026, and contract terms incorporate technical and quality standards referenced from the DLA Master List, including requirements for covered defense information and unit of issue compliance.

Commercial Printing (except Screen and Books)

POSTED

about 3 hours ago

DEADLINE

HEATING ELEMENT, ELE

Solicitation # SPE8E8-26-T-4933

The contract specifies the procurement of a heating element identified by part number 100109774 and NSN 4520016854500, with a quantity of nine units to be delivered within five days of order placement. All items must be packaged and labeled in strict compliance with MIL-STD-129 and ASTM D3951, though any conflicting requirements from the DLA Master List of Technical and Quality Requirements take precedence. Packaging and palletization must adhere to DLA-specific procurement standards, and items must be shipped via the fastest traceable means, explicitly prohibiting parcel post. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The shipment is directed to Fort Eustis, Virginia, and must be marked with the specified military freight and manifest codes. The unit price is $9.00 per item, totaling $81.00, with no variance allowed in quantity. The contract is issued under solicitation SPE8E8-26-T-4933, with a required delivery date of July 29, 2026, and is governed by federal regulations under the Defense Logistics Agency, with technical and quality compliance monitored through referenced DLA master documents.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 3 hours ago

DEADLINE

MARKER, IDENTIFICATI

Solicitation # SPE8E6-26-T-3948

This contract, issued under solicitation SPE8E6-26-T-3948 by the Defense Logistics Agency, pertains to the procurement of a Type I shelf-life item, P/N PSR-9-COMBUSTIBLE, with a 12-month non-extendable shelf life. The material must have at least 85% of its shelf life remaining upon delivery, with expiration and cure dates clearly marked in calendar quarter and year format in accordance with MIL-STD-129, and the expiration date must be exactly one year from the cure date. All packaging must comply with MIL-STD-2073-1E, and marking requirements must strictly follow MIL-STD-129, including the mandatory shelf-life labeling. Plastic materials are to be avoided for wrapping, cushioning, or dunnage whenever contractually permissible. The item is to be delivered FOB origin in a quantity of 4 purchase units within 20 days of contract award, with zero tolerance for variance in quantity. Inspection and acceptance occur at destination, and the delivery point is identified as W6FU SUP ACT MAINZ-WAC in Wackernheim, Germany. The contract incorporates technical and quality requirements from the DLA Master List, with the applicable revision determined by the solicitation issue date. Transportation details are governed by DLAD procedural notes C19 and C20. The purchase unit is PG, and the total contract value is based on a unit price of $4.00, with a required delivery date of July 29, 2026. The item’s NSN is 7690-01-279-7614, and it is classified under NAICS code 323117, reflecting its origin as a defense-related labeling product supplied by American Labelmark Company.

POSTED

about 3 hours ago

DEADLINE

HUB, WHEEL, VEHICULAR

Solicitation # SPE7L7-26-T-4528

This contract pertains to the procurement of a single vehicle hub and wheel assembly identified by NSN 2530-01-666-7753 and part number 3992AS350-3, with a requirement for delivery of one unit within five days of contract award. The item is classified as a critical application item with a Type I shelf life of 60 months, which is non-extendable, and must be marked accordingly per special marking code 32. Strict packaging standards mandated by MIL-STD-2073-1E and MIL-STD-129 apply, including specific preservation methods, unit and intermediate container codes, and palletization in compliance with DLA packaging requirements. The item must be shipped via the fastest traceable means, explicitly excluding parcel post, with delivery FOB origin to the designated government facility at Naval Air Station Whidbey Island, Oak Harbor, WA. Zero tolerance for non-conformances is required during inspection, with sampling governed by MIL-STD-1916 or equivalent zero-based plans, and all attributes must be verified at specified quality levels. The item must be free of intentional mercury or mercury compounds unless used in approved functional components like batteries or instruments, and any mercury-containing portable devices must include secondary containment as per NAVSEA guidance. Contract performance is subject to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and all provisions for inspection, acceptance, and hazardous material handling are binding under applicable military and federal standards.

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

HEATING BLANKET, ELE

Solicitation # SPE8E8-26-T-4935

The contract pertains to the procurement of one heating blanket, electric, identified by NSN 4520-01-706-8039 and part number TW 025 000, under solicitation SPE8E8-26-T-4935, issued by the Defense Logistics Agency on behalf of the Department of Defense. Delivery is required within 20 days of contract award, with FOB origin terms, and inspection and acceptance occurring at the destination point. The quantity is fixed at one unit with zero variance allowed. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and all packaging must be marked and labeled per MIL-STD-129. Palletization must comply with DLA packaging requirements. The blanket must be shipped via traceable freight to the designated military facility at Camp Pendleton, California, and parcel post is explicitly prohibited. The delivery address is identified with a military freight code, and the required delivery date is July 14, 2026. The contract is governed by federal acquisition regulations and incorporates specific technical and quality standards identified by R and I numbers from the DLA Master List, ensuring compliance with defense-specific performance and security criteria. Additionally, covered defense information requirements may apply, and the item is to be marked with the appropriate government usage codes.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 3 hours ago

DEADLINE

STRAINER, WASTE DRAI

Solicitation # SPE8E8-26-T-4939

The contract is for one unit of a Strainer, Waste Drain with NSN 4510-01-669-5545, issued under solicitation SPE8E8-26-T-4939 by the Defense Logistics Agency. Delivery is required within 20 days FOB destination, with no variance allowed in quantity, and inspection and acceptance both occur at the delivery point. The item must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking codes, and palletization must comply with DLA packaging requirements. Technical and quality standards referenced by R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. Shipping must avoid parcel post and use the fastest traceable means, directed to USS CHOSIN CG 65, FPO AP 96662, with shipment details tied to RDD 777 and DLA procedural notes C19 and C20. The required delivery date is August 13, 2025, and the point of contact for inquiries is Alexis Selby at the Defense Logistics Agency.

Plastics Plumbing Fixture Manufacturing

POSTED

about 3 hours ago

DEADLINE