This Government Contract opportunity from Department Of Defense was posted on July 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Tubular Rivets

Closed

Federal

Submission Closed07/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332721

New

DIBBS

FIXTURE, AIRCRAFT MAThe contract pertains to the procurement of seven aircraft maintenance fixtures identified by NSN 4920-01-531-1242 under solicitation SPE4A5-26-T-309C, with a response deadline of August 3, 2026, and delivery required within 167 days after order. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, prohibiting any disclosure or transfer of associated technical data to foreign persons without prior authorization from the Department of State or Commerce, and only contractors with approved JCP certification, completed DLA training, and explicit authorization may access the controlled data. Government identification must be removed from non-accepted supplies, and DLA packaging standards apply. Item Unique Identification is waived per the service customer’s request. The place of performance is New Cumberland, Pennsylvania, and all communications must be directed to Hien-Van Trinh of the Department of Defense’s ASC Supplier Oper OEM Division.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

BOLT, MACHINEThis contract specifies the procurement of a machine bolt identified by NSN 5306001821915 and part number AN3H14, manufactured in accordance with the non-governmental standard NASM3 through NASM20 Revision 5 dated February 28, 2025, and referenced to NASM6812 Revision 4 dated July 31, 2023. The item is classified as a commercial item, and compliance with the current revision of the applicable part standard is mandatory for all hardware produced from the solicitation date forward; previously manufactured hardware conforming to earlier but then-current revisions is also acceptable. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control dependent on the acquisition type and dates. Item Unique Identification is not required per the service customer’s request, and identification markings must follow MIL-STD-130N paragraph 4.1.b(2), including manufacturer logos, lot numbers, and material identifications. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 respectively, with no special marking codes applied. Mercury and mercury compounds are strictly prohibited in preservation, packaging, and marking processes. Sampling inspections must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. The shipment quantity is fixed at one unit with zero tolerance for variance, and delivery must occur within twenty days FOB origin to the specified destination in Jackson, Mississippi. Freight must be shipped via traceable means, excluding parcel post, and palletization must comply with DLA packaging requirements. Inspection and acceptance occur at the destination, and all materials must be properly preserved and labeled per prescribed codes. The contract is issued under solicitation SPE4A6-26-T-09QZ with a response deadline of August 3, 2026, and the item is governed by NAICS code 332721 under the Department of Defense’s Commodity Division.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Retainer, Packing (NSN 5330-00-812-1214) Manufacturing & SupplyThe contract requires the manufacture and supply of Retainer, Packing components designated by NSN 5330-00-812-1214, adhering strictly to military specifications. Materials used must be UV-protective, waterproof, greaseproof, and opaque to ensure durability and functional reliability under demanding operational conditions. All components must comply with established National Stock Number standards and be packaged in accordance with logistics requirements to support efficient military supply chain handling and distribution. The work is classified as a subcontract under NAICS code 332721, indicating involvement in die and tooling manufacturing, with performance expected to meet Defense Department logistics and quality benchmarks. The solicitation was posted on July 24, 2026, with a firm response deadline of July 29, 2026. The contract is managed by the Land Supply Chain under the Department of Defense, and while specific geographic performance locations and points of contact are not provided, all deliverables must align with the standardized military supply protocols governed by the Defense Logistics Agency. The procurement is solicited through the DIBBS platform, and contractors must ensure full compliance with technical, material, and packaging requirements to qualify for award.

POSTED

DEADLINE

Precision Machined Component ManufacturingThe contract requires the manufacture of a precision face seal and cover assembly in full compliance with military specifications, technical data packages, and supplier process instructions. Strict configuration control and defense compliance are mandated throughout production to ensure integrity, traceability, and adherence to all applicable defense standards. The work must be executed with exacting quality assurance protocols, and any deviations from approved documentation must be formally controlled and documented. This is a subcontract for a critical defense component, and all manufacturing activities must align with the Department of Defense’s requirements for security, reliability, and performance. The solicitation was posted on July 24, 2026, with a response deadline of August 7, 2026. The North American Industry Classification System code is 332721, indicating the nature of the work as machine shop services for precision parts. The agency responsible is the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, and performance location details are unspecified, implying flexibility within approved defense-contracted facilities. All submissions must be made through the official DIBBS portal, and only qualified suppliers with proven experience in defense-grade machining and configuration management will be considered for award.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Precision Machined Mounting Plate ManufacturingThe contract calls for the manufacture of 25 precision mounting plates identified by Part No. 712107-A00 and NSN 5340017350186, encompassing the full manufacturing lifecycle from material sourcing through final inspection and packaging. All work must meet stringent quality standards with machining, finishing, and inspection procedures performed to ensure dimensional accuracy and functional integrity. The plates are to be shipped FOB from the origin location, with delivery addressed to the specified place of performance in New Cumberland, Pennsylvania, 17070-5002. This is a subcontract opportunity under the NAICS code 332721, managed by the Nuclear Reactor Program within the Department of Defense, and responses are due by July 29, 2026, with the solicitation posted on July 24, 2026.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Precision Machining of CROSS SLIDE ComponentThe contract calls for the precision manufacture of the CROSS SLIDE component according to engineering drawing NR 53711 8840300, with all work requiring CNC machining, final finishing, and thorough inspection to meet military specifications. The component must be produced to exacting standards ensuring functionality, durability, and compliance with defense-grade quality controls. All manufacturing processes must be documented and validated to demonstrate adherence to the required technical and procedural benchmarks. The solicitation is classified as a subcontract under NAICS code 332721 and is issued by the Department of Defense through the LAND SUPPLY CHAIN organization. Responses are due by August 8, 2026, with the work to be performed at a designated location in N STONINGTON, Connecticut, 06359. The contract is open for bidding through the DIBBS platform, and interested parties must submit proposals by the deadline to be considered for award. There is no set-aside designation specified, meaning the opportunity is open to all qualified subcontractors regardless of business size or classification.

POSTED

DEADLINE

BOLT, MACHINEThe contract pertains to the procurement of 2,349 machine bolts (12-point flanged) with the NSN 5306011471197, manufactured to the SAE J58 standard, revision dated February 1, 2015, with material specifications of steel grade 5 and cadmium plating per QQ-P-416 Type 2 Class 3, and dimensional requirements of 1/2-13 UNC-3A x 3.000 inches nominal. The item is classified as a commercial item and must conform to all applicable technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with specific clauses including RQ001 for tailored quality requirements, RQ006 for quality conformance inspections, RQ009 for origin inspection and acceptance, and RQ017 for bare item marking per MIL-STD-130N paragraph 4.1.b(2), including manufacturer’s logo, lot number, and material ID. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using a zero-based acceptance plan, with any unspecified attributes treated as major; MIL-STD-105/ASQ Z1.4 may be used to determine lot size but acceptance requires zero non-conformances unless otherwise contracted. Packaging and labeling are governed by MIL-STD-129 and ASTM D3951, with DLA Master List requirements taking precedence; palletization must adhere to RP001. All items must be marked in compliance with MIL-STD-129 and prepared for delivery in accordance with specified unit of issue and quantity per unit pack. Delivery is required FOB origin with inspection and acceptance also occurring at origin, and full delivery must be completed within 158 days after award, with a need ship date of July 14, 2026 and a final delivery deadline of March 12, 2027. The shipment destination is the DLA Distribution San Joaquin facility in Tracy, California, and invoicing must be submitted via Wide Area WorkFlow. The contract includes stringent compliance clauses related to safeguarding contractor information systems, NIST SP 800-171, and cybersecurity requirements under DFARS deviations. Offerors must be registered in SAM and disclose their UEI and CAGE code, with size status

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Aerospace Fasteners (Bolts, Pins, Retainers)The contract seeks the supply of precision-machined aerospace fasteners including bolts, pins, retaining rings, and clips certified to military specifications AN, MS, and NAS for use in engine or airframe assemblies within defense systems. The work is classified as a subcontract under NAICS code 332721 and is managed by DLA Aviation under the Department of Defense. Respondents must submit proposals by the deadline of July 31, 2026, with the opportunity posted on July 24, 2026. Performance of the contract is required at a designated location in S Coffeyville, though no further address details are provided. The contract does not specify a set-aside status or point of contact, leaving potential bidders to engage directly through the official SAM.gov portal for full details and submission requirements.

POSTED

DEADLINE

Rod End Connector SupplySeventeen precision-machined Rod End Connectors, identified by NSN 5340013367841, are being procured under a subcontract solicitation issued by the Department of Defense through LAND SUPPLIER OPNS ENGINES. The requirement includes full compliance with packaging and labeling standards suitable for military logistics, with all units to be delivered to the Defense Logistics Agency at the DLA Red River facility in Texarkana, Texas, with a zip code of 75507-5000. The solicitation was posted on July 23, 2026, and responses must be submitted by August 3, 2026. The work falls under the NAICS code 332721, which encompasses the manufacturing of machine shops and precision machining services. There is no set-aside designation specified, and while no point of contact is listed, the opportunity can be accessed through the DIBBS portal using the provided link. Compliance with all technical, logistical, and contractual requirements is mandatory for award consideration.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Precision Hardware Manufacturing and Retainer FabricationThe contract centers on the precision manufacturing of a retainer component identified by NSN 5330006409717, produced in strict compliance with the military specification MS28782E. This includes all stages of fabrication requiring high-accuracy machining, rigorous material traceability from raw stock to finished part, and comprehensive quality assurance procedures to meet defense-grade standards. The work must be executed to ensure dimensional integrity, surface finish, and functional performance suitable for critical fluid handling applications within military systems. The solicitation is classified as a subcontract under NAICS code 332721, with a response deadline of August 3, 2026, and is issued by the Fluid Handling Division of the Department of Defense. Performance is designated for Jacksonville, Florida, with a ZIP code of 32212-0103. The contract was posted on July 23, 2026, and all submissions must align with the technical and logistical requirements outlined in the military specification, ensuring full compatibility with existing defense supply chains and inspection protocols.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturing of Sealed Plain Encased Item (NSN 5330014563884)The contract involves the precision manufacturing of 816 military-grade sealed plain encased components with the NSN 5330014563884, requiring strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for labeling, and MIL-DTL-117 for technical specifications. First Article Testing must be completed on nine units to validate conformance before full production proceeds, ensuring all components meet stringent defense quality and performance benchmarks. The work is to be performed at a designated location in Albany, Georgia with a zip code of 31704-1128, and the contract is classified as a subcontract under NAICS code 332721, indicating it pertains to die manufacturing and related precision machining operations. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, and is managed by the Department of Defense under the organization Land Supplier Operations Vehicle Support. Although no specific point of contact or set-aside designation is listed, interested parties must submit proposals through the DIBBS system via the provided link. Compliance with all referenced military standards is mandatory, and failure to meet technical, packaging, or testing requirements will result in rejection. The contract underscores a high-stakes production effort critical to military logistics and equipment readiness.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Quick Release Retainer Assembly ManufacturingThe contract is for the manufacture and delivery of left-hand and right-hand quick release retainer assemblies under CLIN PR: 0001, with work to be performed at NEW CUMBERLAND, PA, 17070-5002. The solicitation, issued under NAICS code 332721 for Machine Shops, is classified as a subcontract and was posted on July 23, 2026, with a response deadline of August 3, 2026. The contracting activity falls under the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT organization, indicating the products are intended for military vehicle support systems. Although no set-aside type is specified, the requirement demands precise adherence to technical specifications for both left and right-hand assemblies, suggesting compatibility and interchangeability are critical for operational use. All proposals must be submitted via the specified DIBBS portal before the deadline to be considered.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

4 days ago

DEADLINE

in 7 days

AI Contract Overview

The contract calls for the manufacture and supply of 96,000 pounds of tubular rivets in strict accordance with military specifications, encompassing all aspects of production, quality control, packaging, and delivery to meet defense-grade standards. The items must be fabricated and inspected to ensure compliance with required performance, dimensional, and material criteria, with rigorous controls implemented throughout the manufacturing process to guarantee consistency and reliability for military applications. The contract is classified as a subcontract under NAICS code 332721, issued by the ASC Commodities Division within the Department of Defense, with performance required at a facility in San Diego, California, ZIP 92136-3581. The solicitation was posted on July 17, 2026, and responses must be submitted no later than July 22, 2026, indicating a tight five-day window for potential vendors to prepare and submit proposals. All deliveries must adhere to defense logistics requirements and be fully traceable to ensure readiness for military deployment.

General Info

Supply 96,000 pounds of military-spec tubular rivets to San Diego by July 22, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332721 - Precision Turned Product ManufacturingView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 17

subcontract

Response DeadlineJul 22

Deadline has passed

Submission Closed

07/22/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture and supply of 96,000 pounds of tubular rivets per military specifications, including quality control, packaging, and delivery in compliance with defense standards.