Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Valve Disks (NSN 4820005236633)

Active

Federal

Response Deadline10/08/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through the Maritime Supply Chain for the Department of Defense involves the manufacture or procurement of valve disks under NSN 4820005236633. The contractor is responsible for supplying these components to prime contractors who are fulfilling DLA supply contracts, with the final delivery of two valve disks to the DD Depot at Tinker AFB, Oklahoma. Compliance requirements include packaging items according to ASTM D3951 and RP001 standards, with all marking adhering to MIL-STD-129. Additionally, the provider must supply hazard warning labels and Material Safety Data Sheets if the items are classified as hazardous under 29 CFR 1910.1200. The opportunity is categorized under NAICS code 332991.

General Info

Procure two valve disks for DoD delivery to Tinker AFB under NAICS 332991.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN

NAICS

332991 - Ball and Roller Bearing Manufacturing

Place of Performance

TINKER AFB, OK, 73145-9031, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M1-26-T-384X.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DISK, VALVE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 27

subcontract

Response DeadlineOct 8

Submission deadline

Response Deadline

10/08/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies valve disks for prime contractors delivering DLA supply contracts. Manufactures or procures NSN 4820005236633 components. Packages items per ASTM D3951 and RP001, and marks all packaging per MIL-STD-129. Provides hazard warning labels and MSDS if classified as hazardous per 29 CFR 1910.1200. Delivers two valve disks to the DD Depot, Tinker AFB, OK.

Similar Contracts

Same NAICS industry code

Wire Rope Assembly Manufacturer (NSN 1640-01-530-0570)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

BEARING, SLEEVE

Solicitation # SPE4A6-26-Q-1503

Solicitation SPE4A6-26-Q-1503, issued by the DLA Aviation ASC Commodities Division, is a request for quotations for the procurement of six sleeve bearings under NSN 3120-01-561-5318. This is designated as a critical application item subject to configuration control, with a required delivery date of 125 days after order. The contract is a firm fixed price agreement with FOB destination terms, and delivery is to be made to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the point of origin. The award will be based on a best-value comparative assessment where price is approximately equal in importance to the combined non-price factors, with past performance and quoted delivery being weighted equally and significantly more important than other non-price factors. Technical requirements include adherence to the DLA Master List of Technical and Quality Requirements, MIL-STD-129 marking standards, and a strict prohibition on the use of mercury or mercury-containing compounds in the hardware or packaging. Contractors must utilize the Wide Area WorkFlow system for electronic invoicing and comply with DFARS 252.204-7012 regarding the safeguarding of covered defense information. Quotations must be submitted by October 8, 2026, and remain valid for 90 days.

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

BEARING, PLAIN, SPHER

Solicitation # SPE4A6-26-T-37JZ

Solicitation SPE4A6-26-T-37JZ is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of three spherical plain bearings, identified by NSN 3120-01-685-1671. The requirement specifies adherence to TDP Rev A Gen 3 and reference drawing 19207 12555502. Delivery is required within five days after receipt of order, with an original required delivery date of August 4, 2026. The items are to be shipped FOB Origin to the W0MC STK REC ACCT DEPOT REDRVR in Texarkana, Texas, using the fastest traceable means. The contract incorporates extensive technical and quality requirements from the DLA Master List, including standards for covered defense information, tailored higher level quality requirements, and physical identification. Inspection and acceptance will occur at the origin, with the manufacturer's inspection system required to comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916 or ASQ H1331, with a strict requirement of zero non-conformances for acceptance. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Invoicing and payment processing are to be handled electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

HOUSING, BEARING UNIT

Solicitation # SPE4A6-26-Q-1499

Solicitation SPE4A6-26-Q-1499 is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 10 units of Bearing Unit Housings, identified by NSN 3130-00-168-2545. The government will determine the best value based on a comparative assessment of price, delivery, and past performance, with a significant emphasis on SPRS assessments and historical quality and delivery compliance. Quotations must be submitted by October 6, 2026, and must remain valid for 90 days. Delivery is specified as 37 days after receipt of order, with the place of delivery located at the NAVSUP Weapon Systems Support Joint Consolidation Point in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including TDP Rev A Gen 1 and specific basic and reference drawings. Inspection and acceptance will occur at the origin, requiring the contractor to maintain a government-acceptable inspection system. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the procurement incorporates the Federal Acquisition Supply Chain Security Act prohibitions and requires the use of the Wide Area WorkFlow system for electronic invoicing and payment.

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

BUSHING, SLEEVE

Solicitation # SPE4A6-26-T-37KD

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

BEARING, BALL, DUPLEX

Solicitation # SPE4A6-26-T-37HZ

Solicitation SPE4A6-26-T-37HZ is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 25 duplex ball bearings (NSN 3110-01-192-5541). The procurement is conducted under NAICS 332991 and requires submission via the DIBBS system by October 6, 2026. Delivery is expected within 204 days after receipt of the order, with the place of performance and delivery located at DLA Distribution Corpus Christi, Texas. Inspection and acceptance will occur at the origin. The contract mandates strict adherence to domestic material restrictions, including the Buy American Act and the Berry Amendment, and requires a contractor's declaration regarding the domestic or foreign nature of the materials. Specifically, for the bearings, the cost of components manufactured in the US, its outlying areas, or Canada must exceed 50 percent of the total component cost. Quality requirements are stringent, requiring the manufacturer's quality management system to comply with SAE AS9100 or an equivalent standard, and a Certificate of Quality Compliance is mandatory. Offerors are encouraged to provide quantity ranges in their quotes to accommodate volatility in demand. Items produced using additive manufacturing are ineligible for award unless specifically approved. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Solicitation # N0010426QYAJC

This solicitation is for the manufacture of FWD Bearings for use on Navy submarines, specifically requiring the items to be light blue and made from Polyethylene Ultra High Molecular Weight 1900 material. The procurement is managed by the Navsup Weapon Systems Support Mech office and will be awarded based on a best-value determination considering price, delivery lead time, and past performance. The contract includes a one-year warranty after delivery and mandates strict adherence to mercury-free requirements to prevent contamination of submarine and surface ship systems. The contractor must comply with rigorous quality assurance standards, including ISO 9001 and MIL-I-45208. Key requirements include the submission and government approval of a Quality Inspection and Test Plan, as well as first article testing and inspection before production begins. Final acceptance is handled by the Naval Surface Warfare Center, Philadelphia Division, and requires comprehensive documentation, including visual and dimensional inspection reports and mercury exclusion certifications. All shipments must follow MIL-STD 2073 for packaging and marking.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

Supply of Plain Bearing Units (NSN 3130015332373)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of 3.00" Socket-Weld Pipe FlangesThis subcontract involves the supply of 3.00 inch nominal pipe size flat face, socket-weld pipe flanges for prime contractors supporting DLA supply contracts. The provider is responsible for manufacturing or sourcing components using Material Group 1.1 alloys and must ensure all items are certified and delivered. Quality control requires sampling in accordance with MIL-STD-1916 or ASQ H1331, and all packaging must comply with RP001 DLA Packaging Requirements. This opportunity is issued by the Department of Defense under the Maritime Supply Chain ESOC Buys agency, with a response deadline of October 8, 2026.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Domestic Manufacturer of Annular Ball BearingsThis subcontract with the Department of Defense ASC Commodities Division requires the manufacture and supply of 633 annular ball bearings, identified by NSN 3110001982050. The selected manufacturer must utilize precision bearing equipment and ensure all products feature identification markings that adhere to MIL-STD-1647E. Performance will take place in San Diego, California, under NAICS code 332991. To ensure quality and compliance, the provider must implement quality systems that meet SAE AS9003 or ISO 9001 standards and provide a formal Contractor's Declaration of domestic origin. The contract supports prime contractors delivering DLA supply contracts, with a response deadline set for October 5, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Push-Pull Rod Assembly (NSN 1680011639544)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacturing of Sleeve Bearings (NSN 3120014312073)This subcontract involves the precision manufacture of 124 sleeve bearings for the Department of Defense under the ASC Commodities Division. The components must be produced in strict accordance with specific technical drawings, including DWG 803-6397269 PC 83 REV A, DWG 803-2226372, and Naval Drawing 803-2226472. To ensure compliance with defense standards, the manufacturer must utilize precision machining to meet all specified tolerances, guarantee that all materials are mercury-free, and adhere to MIL-STD-2073-1E for all packaging requirements. The project falls under NAICS code 332991 and is intended for prime contractors supporting Defense Logistics Agency supply contracts. Performance of the contract is centered in Tracy, California. The solicitation was posted on September 27, 2026, with a response deadline of October 5, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

Supply of Plastic Component (NSN/Part 7017425306)

Other Engine Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

MIL-STD-129 Compliant Packaging and Labeling

Freight Transportation Arrangement

POSTED

about 9 hours ago

DEADLINE

Supply of Valve Seats (P/N 27386)

Industrial Valve Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supplier of Rotating Precision Mechanism (P/N 133680-97)This subcontract involves the supply of precision mechanical components for prime contractors supporting the Department of Defense Maritime Supply Chain. The specific requirement is for the manufacture or procurement of five units of the Rotating Precision Mechanism, identified by part number 133680-97 and NSN 5985-01-601-8828. All materials must be packaged according to FED-STD-313 and TQ requirement IP025 for hazardous materials. The performance of this contract will take place in New Cumberland, Pennsylvania, under NAICS code 333249.

Other Industrial Machinery Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Gas Detectors (NSN 6665-01-565-6215)

Irradiation Apparatus Manufacturing

POSTED

about 9 hours ago

DEADLINE

Compliant Raw Material SupplyThis subcontract under the Maritime Supply Chain within the Department of Defense focuses on the procurement and delivery of military-grade raw metals and alloys. The supplier is responsible for providing materials that meet strict technical specifications for sight mounts, ensuring all stock is delivered with the necessary certifications of origin. A critical component of this agreement is mandatory compliance with the Buy American Act and the Berry Amendment. The performance of these duties is centered in New Cumberland, Pennsylvania, under NAICS code 331110, with a response deadline set for October 9, 2026.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 9 hours ago

DEADLINE

DLA Compliant Packaging and Marking ServicesThis subcontract for DLA Compliant Packaging and Marking Services supports prime contractors on Defense Logistics Agency supply contracts. The service provider is responsible for packaging shipments according to RP001 DLA Packaging Requirements and marking them in accordance with MIL-STD-129. To ensure the safety of fragile items, the contractor must utilize industrial labeling systems and MIL-SPEC packaging materials to deliver shipments that are ready for government acceptance. The contract is managed by the Department of Defense under the Maritime Supply Chain agency and is categorized under NAICS code 339999. Performance of these services will take place in New Cumberland, Pennsylvania. The solicitation was posted on September 28, 2026, with a response deadline of October 9, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 9 hours ago

DEADLINE

Sight Mount Fabrication and ManufacturingThis subcontract for Sight Mount Fabrication and Manufacturing involves the precision CNC machining of sight mounts for prime contractors under Defense Logistics Agency supply contracts. The work must be performed in New Cumberland, Pennsylvania, adhering strictly to the DLA Master List of Technical and Quality Requirements RA001. All materials used must comply with the Buy American Act and the Berry Amendment, and the provider is required to maintain a CMMC Level 2 Self-Assessment. The opportunity is issued by the Department of Defense under the Maritime Supply Chain agency with a NAICS code of 332994. Interested parties must submit their responses by October 9, 2026, for the delivery of finished sight mounts.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 9 hours ago

DEADLINE

METER, SPECIAL SCALE

Solicitation # SPE7M1-26-T-388C

Solicitation SPE7M1-26-T-388C is a total small business set-aside issued by DLA Land and Maritime for the procurement of four special scale meters under NSN 6625012017974. The requirement specifies that the items must meet the cited technical data and part numbers for L-3 Communications Westwood (P/N 4950P7001-63) or Custom Metering Company Inc (P/N MMI-10348-63). Delivery is required within 20 days after receipt of order, with a target delivery date of September 24, 2026. The items are to be delivered FOB Destination to the USS COMSTOCK LSD 45. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Special attention is required for hazardous materials, including compliance with the Hazard Communication Standard and the submission of Safety Data Sheets prior to award. Additionally, the procurement is subject to the Buy American Act and the Berry Amendment, requiring disclosure of any non-domestic materials used. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system. Inspection and acceptance will occur at the destination per FAR 52.246-2.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 9 hours ago

DEADLINE

COIL, RADIO FREQUENCY

Solicitation # SPE7M1-27-Q-0009

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-387R

Solicitation SPE7M1-26-T-387R is a request for quotations issued by DLA Land and Maritime for the procurement of 24 gas detector units, identified by NSN 6665-01-565-6215. This acquisition is set aside for Women-Owned Small Businesses (WOSB) and requires certified vendors to submit their quotes via DIBBS by October 9, 2026. The required delivery date for the items is February 11, 2027, with shipping terms set as FOB Destination to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including Item Unique Identification (IUID) per MIL-STD-130 and DFARS 252.211-7003. Packaging must comply with RP001 and MIL-STD-129, with specific requirements for hazardous materials labeling under 29 CFR 1910.1200 and FED-STD-313. Inspection and acceptance will occur at the destination. Additionally, the procurement incorporates various DFARS and FAR clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment.

Analytical Laboratory Instrument Manufacturing

POSTED

about 9 hours ago

DEADLINE

PROTECTIVE SCREEN, V

Solicitation # SPE7M1-26-T-388G

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS