Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Valve Nozzles (NSN 4820-01-714-1239)

Active

Response Deadline11/16/2026, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement of nine valve nozzles, identified by NSN 4820-01-714-1239, to support prime contractors on US Navy supply contracts. The selected provider will be responsible for sourcing or manufacturing the units, ensuring that all items are marked according to MIL-STD-129 and packed in compliance with MIL-STD-2073-1. The contract falls under NAICS code 332911 and is managed by the Department of the Navy through the DLA Aviation office in Philadelphia. The agreement requires strict adherence to the Buy American Act for commercial products, specifically following DFARS 252.225-7000 and 7036 regulations. Performance will take place in Philadelphia, Pennsylvania. Interested parties must note the response deadline of November 16, 2026, to be considered for this supply requirement.

General Info

Procure nine valve nozzles for US Navy by November 16, 2026, in Philadelphia.

Agency

Department Of The Navy → Pa DLA Aviation At Philadelphia

NAICS

332911 - Industrial Valve Manufacturing

Place of Performance

PHILADELPHIA, PA, 19111-5098, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRPA127QXA57.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NOZZLE,VALVE — 4820017141239 — SPRPA127QXA57

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 29

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 09:30:00 PM UTCin 18 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Pa DLA Aviation At Philadelphia

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Pa DLA Aviation At Philadelphia

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies valve nozzles for prime contractors on US Navy supply contracts. Sources or manufactures NSN 4820-01-714-1239 nozzles, performing packing per MIL-STD-2073-1 and marking per MIL-STD-129. Complies with Buy American Act (DFARS 252.225-7000/7036) for commercial products. Delivers 9 units of NSN 4820-01-714-1239 Valve Nozzles.

Similar Contracts

Same NAICS industry code

Brine System Component Supply

POSTED

about 6 hours ago

DEADLINE

Supply of Solid Wedge Valve DisksThis subcontract involves the supply of three solid wedge valve disks for prime contractors supporting DLA Weapons Support Maritime Hardware projects. The required parts must match NSN 4820012399227 and maintain compatibility with CRANE CO DIV VALVE DIV 14959 P/N DB19327-4IN. All units must be manufactured from steel and feature marking that adheres to MIL-STD-129 standards. The contract is managed by the Department of Defense through DLA DIST SAN JOAQUIN, with the place of performance located in Tracy, California. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026. The project falls under NAICS code 332911.

DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

Supply of Ball Valves (PN: 4820-01-667-4479)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Supply of Safety Relief Valves (NSN 4820-01-304-2075)

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

Supply of 316 SS Full-Port Ball ValvesThis subcontract involves the supply of 15 units of 316 Stainless Steel full-port ball valves for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The required hardware must meet NSN 4820015820109 specifications, featuring oval handles and 1/2 inch NPT female connections. All provided components must strictly comply with NAVSEA mercury-free hardware standards. The procurement is managed under NAICS code 332911 for the Department of Defense, with performance taking place in New Cumberland. Interested parties must be SAM registered to be eligible. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

Supply of Butterfly Valve Parts Kit (NSN 4810-01-708-6496)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Supply of Bronze Swing Check Valves (NSN 4820004516024)This subcontract involves the supply of four bronze swing check valves under NSN 4820004516024 for the DLA Weapons Support Maritime Supply Chain. The required 1 1/4 inch valves must feature EPR rubber gaskets and identification plates marked CID 882037213. Performance will take place in Tracy, California, under NAICS code 332911. The contractor is responsible for manufacturing or sourcing these critical application items while ensuring strict compliance with the Berry Amendment and the Buy American Act. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Supply of Valve Seats (NSN 4810006132859)This subcontract involves the manufacture or procurement of 65 valve seats under NSN 4810006132859 for the DLA Weapons Support Maritime Supply Chain within the Department of Defense. The selected provider is responsible for ensuring all units meet strict technical specifications and are delivered to Hill AFB. Compliance with military standards is mandatory, specifically requiring packaging in heat sealed barrier bags and marking in accordance with MIL-STD-129 and RP001 DLA Packaging Requirements. The contract falls under NAICS code 332911, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Supply of Valve Disk (NSN 4810-01-700-4309)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the manufacture or procurement of one valve disk identified by NSN 4810-01-700-4309. The selected provider will supply the component to prime contractors and coordinate delivery through the First Destination Transportation program, with the place of performance located in Mechanicsburg. The contract mandates strict adherence to NIST SP 800-171 cybersecurity standards and DFARS regulations, specifically prohibiting the use of hexavalent chromium and the involvement of certain foreign military companies. Interested parties must respond by November 9, 2026, for this requirement categorized under NAICS code 332911.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Supply of Valve Disk (NSN 4820-01-382-8931)This subcontract involves the supply of one industrial valve disk, identified by NSN 4820-01-382-8931, to support prime contractors delivering maritime hardware and electrical contracts for the DLA Weapons Support. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The contractor must ensure the unit adheres to MIL-STD-129 marking and shipping standards and complies with all DFARS Buy American and cybersecurity requirements. The response deadline for this requirement is November 9, 2026, and the delivery involves providing one properly marked and packaged valve disk to the designated destination.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

Supply of Safety Relief ValvesThis subcontract involves the manufacture and supply of 15 safety relief valves, identified by NSN 014510722, for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The contractor is required to produce these units in strict accordance with DLA technical data specifications, utilizing additive manufacturing processes where applicable. To be eligible, the provider must maintain an active SAM registration and ensure full compliance with domestic origin requirements. The project is categorized under NAICS code 332911 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 6, 2026, to fulfill the delivery of the 15 completed valves as specified in the procurement guidelines.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-27-T-0800

Solicitation SPE7MC-27-T-0800 is a request for quotations issued by the DLA Weapons Support Maritime Hardware/Electrical for the procurement of five safety relief valves, identified by NSN 4820014527524. These are designated as critical application items featuring a 2.500 inch valve size, bronze body material, and a 150 PSI rating. Approved sources include Dante Valve Company (P/N BASGG06SJJ) and Hunt Valve Company (P/N D52068 72TO88PSI or R10AK2K2-13-BM1). Due to the nature of the item, the government notes that special tooling, casting, or forging may be required for manufacture. The contract requires delivery within 127 days, with shipping terms set as FOB Origin and destination inspection and acceptance. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Additionally, the hardware must comply with NAVSEA 5100-003D regarding mercury restrictions. Offerors must submit quotes via the DIBBS system by October 29, 2026, and provide Safety Data Sheets for any hazardous materials to remain eligible for award. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of The Navy → Pa DLA Aviation At Philadelphia

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA aerospace supply contracts through the Department of the Navy. The scope of work involves executing specialized packaging according to MIL-STD-2073 Level A and B standards and applying precise labeling per MIL-STD-129, including PIID, CLIN, and Depot Level Repairable labels. The provider must utilize compliant shipping containers, including long-life reusable or wood options, to ensure all shipments are ready for origin acceptance. The project is managed by the Pa DLA Aviation At Philadelphia office, with performance taking place in Philadelphia, Pennsylvania. Interested parties should note the response deadline of November 9, 2026. The contract falls under NAICS code 333613 and focuses on delivering fully packed and marked containers that meet rigorous military specifications for aerospace supplies.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

Manufacturing of Turbine Shroud Segments (NSN 2840-01-699-6679)This subcontract involves the manufacture and supply of 114 turbine shroud segments for aircraft engine component projects managed by the Department of the Navy via the DLA Aviation office in Philadelphia. The contractor is responsible for fabricating these segments using high-temperature alloys and precision machining to ensure strict adherence to military specifications and aerospace tolerances. Due to the nature of the components, the project requires strict compliance with Critical Safety Item protocols and FAR 25.105 domestic content requirements. Eligible providers must possess a valid CAGE code and the necessary CSI certification to fulfill the delivery of the finished turbine shroud segments.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 20 hours ago

DEADLINE

Supply of Aircraft Valve (NSN 2840-01-666-6866)This subcontract involves the sourcing and manufacturing of 35 aircraft valves, identified by NSN 2840-01-666-6866, to support prime contractors fulfilling DLA supply contracts for the Department of the Navy. As these components are designated as Critical Safety Items, the provider must ensure strict adherence to MIL-STD-2073 for packaging and MIL-STD-129 for marking. Additionally, the contractor is required to provide safety data sheets and GHS-compliant labels for any hazardous materials involved. The agreement mandates full certification of compliance with the Buy American Act and the Trade Agreements Act. Delivery of the 35 units is set as FOB Destination to the Pa DLA Aviation facility in Philadelphia. The procurement falls under NAICS code 336412, with a response deadline established for November 16, 2026.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 20 hours ago

DEADLINE

Supply/Sourcing of NSN 1560-01-723-2762This subcontract involves the sourcing and supply of one certified Balance Weight, Stab (NSN 1560-01-723-2762) for prime contractors supporting DLA supply contracts. The selected provider must procure the specific part from an original equipment manufacturer or an authorized distributor, ensuring full verification of provenance and CSI certification. All items must be packaged according to MIL-STD-2073 standards to meet strict military requirements. The contract is managed by the Department of the Navy through the Pa DLA Aviation office in Philadelphia. To be eligible, contractors must maintain ISO 9000 certification and operate certified aerospace logistics facilities. The performance of this contract will take place in Philadelphia, Pennsylvania, with a response deadline set for November 30, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Manufacture of Aircraft Stabilizer Balance Weight (CSI)This subcontract involves the manufacture of a high-precision aircraft stabilizer balance weight for prime contractors under DLA supply contracts. The selected provider must fabricate the component according to NSN 1560-01-723-2762 technical specifications, utilizing precision machining and aerospace-grade materials. Due to the nature of the part, strict adherence to Critical Safety Item quality control and ISO 9000 standards is required, with final packaging performed per MIL-STD-2073. Managed by the Department of the Navy through the DLA Aviation office in Philadelphia, the contract falls under NAICS code 336413. The scope of work culminates in the delivery of one certified balance weight. Interested parties must respond by November 30, 2026, for performance located in Philadelphia, Pennsylvania.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Supply of Electrical Alignment Tool (NSN 5120-01-397-7998)This subcontract, issued by the Department of the Navy via the DLA Aviation office in Philadelphia, requires the manufacture and delivery of one new Electrical Alignment Tool (NSN 5120-01-397-7998). The contractor must produce the item according to exact government specifications, ensuring it is marked with a Unique Item Identifier using two-dimensional data matrix symbology per ISO/IEC 16022 and packaged in accordance with MIL-STD-2073. The project falls under NAICS code 333998 and mandates strict compliance with DFARS 252.225-7001 and NIST SP 800-171 standards. Performance will take place in Philadelphia, Pennsylvania. Interested parties must submit their responses by the deadline of November 30, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Manufacturing of Circuit Card Assemblies (NSN 4920-01-573-4577)This subcontract involves the manufacture and supply of two newly produced Circuit Card Assemblies (NSN 4920-01-573-4577) for prime contractors supporting NAVAIR and DLA procurement projects. The scope of work includes the fabrication and assembly of circuit cards according to the total equipment baseline configuration, encompassing all necessary hardware, software, and firmware. Performance is managed under the Department of the Navy through the DLA Aviation office in Philadelphia. The contractor is required to perform Product Verification Testing in accordance with DLAD 46.292 and ensure packaging meets MIL-STD-2073 standards. A critical compliance requirement for this effort is the possession of CSI certification per DFARS 252.209-7010. The project falls under NAICS code 334418, with the place of performance located in Philadelphia, Pennsylvania.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Circuit Card Assembly (NSN 5998-01-543-4872) SupplierThis subcontract opportunity with the Department of the Navy, managed by DLA Aviation at Philadelphia, requires the manufacture or sourcing of one Circuit Card Assembly under NSN 5998-01-543-4872. The selected supplier must possess PCB fabrication capabilities and ensure all packaging adheres to MIL-STD-2073 standards. Compliance with the Buy American Act and Trade Agreements Act is mandatory for this procurement. Security and data protection are critical components of this contract, requiring the implementation of NIST SP 800-171 and DFARS 252.204-7012 to safeguard Controlled Unclassified Information. The performance of the contract will take place in Philadelphia, with a response deadline set for November 30, 2026.

Bare Printed Circuit Board Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Supply of Guide, Swashplate (NSN 1650-01-665-1380)This subcontract involves the manufacture or procurement of one warranted Guide, Swashplate under NSN 1650-01-665-1380 for the Department of the Navy, specifically supporting Pa DLA Aviation in Philadelphia. The project requires high-precision machining to meet aviation-grade standards and strict adherence to DPAS DO rating compliance. The contractor is responsible for applying Item Unique Identification and reporting the necessary data through the IUID Registry or WAWF. Additionally, all components must be packaged according to MIL-STD-2073 specifications. The response deadline for this requirement is November 30, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Supply of Data Interface UnitsThis subcontract involves the supply of 10 Data Interface Units (NIIN 016241529) for prime contractors supporting Department of Defense projects under the DLA Aviation at Philadelphia and the Department of the Navy. The contractor is responsible for manufacturing or sourcing these units in strict accordance with Technical Data Package Version 003, ensuring that all hardware, software, and firmware baseline configurations are maintained. Additionally, all hardware must be provided with Unique Item Identifiers. The contract mandates strict adherence to several regulatory and security standards, including the BAA, NIST SP 800-171 for protecting Controlled Unclassified Information, and DFARS 252.204-7016. Performance will take place in Philadelphia, Pennsylvania, under NAICS code 334220. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

Supply of Combustion Liners (NSN 2840-01-709-1523)This subcontract involves the manufacture or sourcing of three combustion liners under NSN 2840-01-709-1523 for prime contractors supporting DLA supply contracts. Managed by the Department of the Navy via the Pa DLA Aviation office in Philadelphia, the project requires strict adherence to Critical Safety Item protocols and MIL-STD-2073 packaging standards. The contractor must implement Item Unique Identification and maintain full Buy American compliance in accordance with DFARS 252.225-7001. Final delivery of the components must be accompanied by the necessary Material Inspection and Receiving Reports to ensure all quality and regulatory specifications are met.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 20 hours ago

DEADLINE

Digital Interface Component SupplyThis subcontract, managed by the Department of the Navy through the DLA Aviation office in Philadelphia, requires the supply of one digital interface component. The specific item is identified by NSN 7RH 1680-01-555-6179 and Part Number 4240210-504. The contractor is responsible for ensuring that all packaging and marking of containers adhere to MIL-STD-129 standards and that the procurement complies with the Buy American and Trade Agreements Act. The contract stipulates a delivery timeline of one unit FOB Destination within 90 days of the award. Performance will take place in Philadelphia, Pennsylvania, under NAICS code 423610. Interested parties must have responded by the deadline of November 12, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS