Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Vehicular Safety Belts (NSN 2540017159091)

Active

Federal

Response Deadline10/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense under the LSO Combat Vehicles and Armament agency, requires the supply of 405 finished vehicular safety belts. The contractor is responsible for manufacturing or procuring the belts in strict accordance with Part Number 133114-9 and the DLA Master List of Technical and Quality Requirements. All deliverables must adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contract mandates full compliance with the Buy American and Balance of Payments Program as well as DFARS 252.204-7012. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 8, 2026, with a response deadline of October 14, 2026, falling under NAICS code 336390.

General Info

Supply 405 vehicular safety belts per Part 133114-9 for Department of Defense.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

NAICS

336390 - Other Motor Vehicle Parts Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L4-26-T-6371.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BELT, VEHICULAR SAFE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 14

Submission deadline

Response Deadline

10/14/2026, 05:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies finished vehicular safety belts for prime contractors on DLA Land and Maritime supply contracts. Manufactures or procures belts per Part Number 133114-9 and DLA Master List of Technical and Quality Requirements. Performs packaging per MIL-STD-2073-1E and marking per MIL-STD-129. Requires compliance with Buy American and Balance of Payments Program and DFARS 252.204-7012. Delivers 405 units of safety belts.

Similar Contracts

Same NAICS industry code

Pneumatic Wheel Assembly ManufacturingThis subcontract involves the manufacture and assembly of pneumatic tire wheel assemblies for prime contractors supporting Department of Defense Land Supply Chain contracts. The contractor is responsible for fabricating units according to TDP Rev C Gen 3 and Basic Drawing NR 19207 12505841, integrating source-controlled components to deliver completed NSN 2530-01-578-6276 assemblies. All work must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards. To be eligible, the provider must maintain JCP certification, hold ITAR/EAR export authorizations, and meet CMMC Level 2 cybersecurity requirements. The project falls under NAICS code 336390, with a response deadline set for November 11, 2026.

LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

RACK, AMMUNITION STOWAG

Solicitation # SPE7L3-27-T-0732

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

EXHAUST TUBE ASSY, R

Solicitation # SPE7L5-27-T-0148

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 19 hours ago

DEADLINE

LATCH, PINTLE HOOK

Solicitation # SPE7L4-27-T-0302

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 19 hours ago

DEADLINE

ACTUATOR ASSEMBLY, AIR

Solicitation # SPE7L3-27-T-0815

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7M4-27-T-0952

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

INSULATION, VEHICULAR

Solicitation # SPE7L3-27-T-0806

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

FILTER ASSEMBLY, FUE

Solicitation # SPE7L4-27-T-0220

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 19 hours ago

DEADLINE

PANEL, VEHICULAR OPE

Solicitation # SPE7L3-27-T-0696

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7L4-27-U-0054

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 19 hours ago

DEADLINE

DEFLECTOR, DIRT AND LIQ

Solicitation # SPE7L5-27-T-0185

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 19 hours ago

DEADLINE

CONTROL, ANTI-LOCK BRAK

Solicitation # SPE7L3-27-T-0683

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

Precision Shim Fabrication (P/N PR8718P1)This subcontract involves the manufacture and supply of 10 precision shims for prime contractors supporting DLA Land and Maritime supply contracts. The fabrication must strictly adhere to BAE Systems part number PR8718P1 and NSN 5365004516634 specifications, while complying with the DLA Master List of Technical and Quality Requirements. Additionally, the contractor is prohibited from using Class I ozone-depleting chemicals during production. The completed shims must be packaged according to MIL-STD-2073-1E and MIL-STD-129 standards and delivered to the DDSP New Cumberland Facility. This requirement is issued under the Department of Defense through the LSO Combat Vehicles and Armament agency, with a response deadline of October 15, 2026.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

PARTS KIT, SEAL, BRAK

Solicitation # SPE7L4-26-T-7280

Solicitation SPE7L4-26-T-7280 is a fixed-price, total small business set-aside request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of 208,000 brake seal parts kits (NSN 1015-01-166-0265). This item is designated as a critical gun part and critical application item, requiring strict adherence to technical data and drawings, including TDP Rev C Gen 3. Delivery is required within 157 days, with a need ship date of March 16, 2027, and a final required delivery date of July 16, 2027, to DLA Distribution Red River in Texarkana, Texas. The contract mandates rigorous quality and security standards, including origin inspection and acceptance conducted by a Quality Assurance Representative at the manufacturer's facility. Manufacturers must comply with SAE AS9003 or tailored ISO 9001 standards. Due to the sensitive nature of the technical data, the contract incorporates export controls under ITAR and EAR, and requires CMMC Level 2 certification. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with specific requirements for bagging and the omission of nomenclature from shipping containers for protected cargo. The items have an extendible shelf-life of 36 months. Invoicing and payment are processed electronically through the Wide Area WorkFlow system.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

SEAL, PLAIN ENCASED

Solicitation # SPE7L4-26-U-1295

Solicitation SPE7L4-26-U-1295 is a request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of plain encased seals, identified by NSN 5330-01-013-4433. This requirement may result in a unilateral Indefinite Delivery Contract for a one year period with a maximum contract value of 350,000.00 dollars. The estimated annual quantity is 32 units, with a required delivery timeline of 97 days after order. Inspection and acceptance will occur at the destination, while delivery is specified as FOB Origin. The contract mandates strict adherence to technical and quality requirements, including a prohibition on asbestos and the use of additive manufacturing unless authorized. Packaging must comply with MIL-STD-2073-1E and RP001, specifically requiring items to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent deterioration from ultraviolet rays. Marking must follow MIL-STD-129. Offerors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and utilize the Wide Area WorkFlow system for electronic invoicing and payment requests.

Rubber Product Manufacturing for Mechanical Use

POSTED

DEADLINE

SEAL, NONMETALLIC SPECI

Solicitation # SPE7L4-26-U-1303

Solicitation SPE7L4-26-U-1303 is a total small business set-aside issued by DLA Land and Maritime for the procurement of nonmetallic special shaped section seals, identified by NSN 5330-01-500-5597. The government seeks a fixed-price unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and an estimated annual quantity of 19 units. Delivery is required within 97 days after order, with inspection and acceptance occurring at the destination. All supplied items must be free of asbestos and cannot be produced using additive manufacturing. The contract mandates strict adherence to military standards, including MIL-STD-130N for identification marking and MIL-STD-129 for shipment marking. Due to the potential for ultraviolet ray deterioration, items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Security and compliance requirements include CMMC Level 2 certification and the safeguarding of covered defense information under DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

CONDITIONER, CHARGER, BA

Solicitation # SPE7L4-26-U-1304

Solicitation SPE7L4-26-U-1304 is a Total Small Business Set-Aside issued by DLA Land and Maritime for the procurement of battery charger conditioners, NSN 6130015395316. The government has designated Lamar Technologies (CAGE 3RCDC2, PN AC25C) as the only approved source for this requirement. This unilateral Indefinite Delivery Contract (IDC) has a maximum value of 350,000.00 dollars and an estimated annual quantity of 36 units, with a delivery period of 127 days after order. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging requirements (RP001) and marking standards per MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Special environmental restrictions prohibit the intentional addition of mercury, except where functionally required in batteries or sensors. Contractors must utilize the Wide Area Workflow system for electronic invoicing and payment requests and comply with various FAR and DFARS clauses regarding hazardous material identification, cybersecurity, and domestic material preferences.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

DEADLINE

SEAL, HATCH RIM

Solicitation # SPE7L4-26-U-1305

Solicitation SPE7L4-26-U-1305 is a total small business set-aside request for quotations issued by the Department of Defense, DLA Land and Maritime, LSO Combat Vehicles and Armament. The procurement is for an estimated quantity of 82 Hatch Rim Seals (NSN 5330-01-495-6702) under a Unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 USD. The acquisition is conducted under the First Destination Transportation program, and while some documentation mentions FOB Destination, offers should be submitted based on FOB Origin. Delivery is required within 97 days after order. The contract mandates strict technical and quality compliance, including a total prohibition of asbestos and a ban on additive manufacturing unless specifically authorized. Items must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration and marked according to MIL-STD-129 and MIL-STD-130N, including shelf life marking. Inspection will occur at the destination, with acceptance based on zero non-conformances in sample lots. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to NIST SP 800-171 and DFARS 252.204-7012 for safeguarding covered defense information.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

PARTS KIT, AIR-HYDRAULI

Solicitation # SPE7L4-26-U-1297

Solicitation SPE7L4-26-U-1297 is a Total Small Business Set-Aside issued by the Defense Logistics Agency Land and Maritime for the procurement of air-hydraulic brake slave cylinder parts kits under NSN 2530015307727. The requirement is for an estimated annual quantity of 105 units, with acceptable part numbers identified as Fast Global Solutions Inc 622177-3 and 622177-3C. This procurement may result in a unilateral Indefinite Delivery Contract for a one-year period with a maximum value of 350,000.00 dollars. Delivery is required within 75 days after order, with inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and DLA packaging requirements RP001. Non-hazardous materials must follow ASTM D3951, while hazardous materials require packaging per TQ requirement IP025 and labeling according to the Hazard Communication Standard. All payment requests and receiving reports must be submitted electronically via the Wide Area WorkFlow system. Award evaluation will be based on the price quoted for the estimated annual demand, and the buy is identified as a candidate for automated award.

Motor Vehicle Brake System Manufacturing

POSTED

DEADLINE

MUFFLER, EXHAUST

Solicitation # SPE7L4-26-U-1306

Solicitation SPE7L4-26-U-1306 is a total small business set-aside issued by the DLA Land and Maritime, LSO Combat Vehicles and Armament, for the procurement of exhaust mufflers. The requirement is for NSN 2990015747351, associated with Carrier Corp part number 30-60051-01. This effort may result in a unilateral fixed-price Indefinite-Delivery Contract (IDC) for a one-year period with a maximum value of 350,000.00 dollars. The estimated annual quantity is 60 units, though this is an estimate and not a guaranteed purchase. Delivery is required within 76 days after order, with FOB terms set as origin and both inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, with DLA Master List requirements and RP001 packaging requirements taking precedence. Technical and quality standards are further governed by the DLA Master List, including the removal of government identification from non-accepted supplies per RQ011. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Award will be granted to a responsible offeror based on the price quoted for the estimated annual demand. All quotes must be submitted via the DLA Internet Bid Board System.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE7L4-26-T-6418

Solicitation SPE7L4-26-T-6418 is a fixed-price requirement issued by the Department of Defense, specifically the DLA Land and Maritime LSO Combat Vehicles and Armament, for the procurement of 10 units of SHIM, identified by NSN 5365004516634 and BAE Systems part number PR8718P1. The contract falls under NAICS code 332510. Delivery is required within 168 days after order, with a need ship date of February 16, 2027, and an original required delivery date of January 21, 2028. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, and ensure no Class I ozone-depleting chemicals are used in the items. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including those regarding combating trafficking in persons, safeguarding covered defense information, and the Buy American Act. All quotes must be submitted via the DLA Internet Bid Board System.

Hardware Manufacturing

POSTED

DEADLINE

BELT, VEHICULAR SAFE

Solicitation # SPE7L4-26-T-6371

Solicitation SPE7L4-26-T-6371, issued by the Department of Defense DLA Land and Maritime LSO Combat Vehicles and Armament, is for the procurement of Vehicular Safe Belts, identified as critical application items. The requirement consists of two line items for NSN 2540017159091, Part Number 133114-9 (BAE Systems Land & Armaments L.P. 54786), totaling 405 units. Specifically, CLIN 0001 requires 172 units for delivery to the DDSP New Cumberland Facility in Pennsylvania, and CLIN 0002 requires 233 units for delivery to DLA Distribution Barstow in California. The delivery timeframe is 157 days after order, with a need ship date of February 2, 2027, and an original required delivery date of May 8, 2027. The contract is established as FOB Origin with destination inspection and acceptance governed by FAR 52.246-2. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Invoicing and receiving reports are to be processed electronically via the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American and Balance of Payments Program, DFARS 252.204-7012 for safeguarding covered defense information, and strict adherence to hazardous material labeling standards under 29 CFR 1910.1200.

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

DEADLINE

ROLLER AND BEARING

Solicitation # SPE7L4-26-T-7252

Solicitation SPE7L4-26-T-7252 is a fixed-price request for quotations issued by the Defense Logistics Agency, Land and Maritime, for the procurement of 579 roller and bearing seat mounts for use in armored bridge launchers. The items, identified by NSN 2590-00-912-6487, are to be delivered FOB Origin to DLA Distribution Anniston, Alabama, with a delivery window of 130 days after order. The solicitation requires submission via the DIBBS system and mandates that the contractor provide a declaration regarding the domestic or foreign nature of the materials offered. Compliance with strict sourcing and security regulations is required, specifically DFARS 252.225-7016, which restricts the acquisition of ball and roller bearings to those manufactured in the United States, its outlying areas, or Canada. The contract incorporates technical and quality requirements from the DLA Master List and mandates packaging and marking in accordance with MIL-STD-2073-1E and MIL-STD-129. Additionally, the procurement is subject to export controls under ITAR and EAR, requires CMMC Level 2 certification, and mandates electronic invoicing through the Wide Area WorkFlow system. Inspection and acceptance will occur at the destination per FAR 52.246-2.

Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

DEADLINE

Solicitation # SPE7L4-26-T-6607

Solicitation SPE7L4-26-T-6607, issued by DLA Land and Maritime under the LSO Combat Vehicles and Armament office, is a request for quotations for 148 units of tube elbows, further described as non-metallic hose assemblies. The procurement is categorized under NAICS code 332912. The required delivery date is January 5, 2027, with a delivery lead time of 118 days after order. Shipping is to be handled via the First Destination Transportation program, with the delivery destination located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements and RP001 for palletization take precedence. Invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, compliance with the Buy American Act and Berry Amendment, and prohibitions on covered defense telecommunications equipment. Quotes must be submitted via the DIBBS portal based on FOB Origin terms.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS