Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Water Purification Filter Assembly (NSN 4610-01-546-9419)

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of water purification filter assemblies, specifically NSN 4610-01-546-9419, for prime contractors supporting DLA Troop Support. The contractor is responsible for sourcing or manufacturing assemblies identical to Parker Hannifin PN 18460 in accordance with Technical Data Package Revision A. All deliverables must comply with the Buy American Act and be delivered as one packaged filter assembly FOB Origin. Strict quality and logistical standards are required for this engagement. Quality control must be performed per MIL-STD-1916 or ASQ H1331, while packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001. The contract is managed under NAICS code 333310 for the Department of Defense, with performance based in Jacksonville.

General Info

Supply water purification filter assemblies for DLA Troop Support per strict military standards.

Agency

Department Of Defense → JACKSONVILLE BLDG

NAICS

333310 - Commercial and Service Industry Machinery Manufacturing

Place of Performance

JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E8-27-T-0244.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FILTER ASSEMBLY, WATER

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → JACKSONVILLE BLDG

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → JACKSONVILLE BLDG

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies water purification filter assemblies for prime contractors on DLA Troop Support contracts. Sources or manufactures assemblies identical to Parker Hannifin PN 18460 per Technical Data Package Revision A. Performs quality control per MIL-STD-1916 or ASQ H1331 and executes packaging and marking per MIL-STD-2073-1E, MIL-STD-129, and RP001. Must comply with Buy American Act. Delivers one packaged filter assembly FOB Origin.

Similar Contracts

Same NAICS industry code

PERISCOPE SUBASSEMB

Solicitation # N0010425QFC44

This contract is a solicitation for the procurement of a Left Training Handle Stuffing Box Assembly, designated as Special Emphasis material due to its critical role in shipboard systems where failure could result in serious injury or loss of the vessel. The order is DX-rated for national defense use and requires strict adherence to specific technical drawings and quality standards, including hydrostatic pressure testing and non-destructive testing of welds. Key requirements include the use of ASTM-B21 Alloy C46400 for the stuffing box plug and a prohibition on molybdenum disulfide thread lubricants. The contractor must provide comprehensive certification data and a certificate of compliance via the Wide Area Workflow (WAWF) system for review and acceptance by the Portsmouth Naval Shipyard prior to shipment. Quality assurance is managed through rigorous inspection standards, including zero-defect lot acceptance and mandatory traceability for all raw materials. The contract also establishes strict configuration control, requiring formal Engineering Change Proposals for any modifications to form, fit, or function, and mandates a one-year warranty from the date of delivery.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

12--PERISCOPE,TUBE,OUT

Solicitation # N0010426RFG66

This negotiated solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of a periscope outer tube (NSN 1240-01-634-0653L1). The item is designated as Special Emphasis material (Level I) due to its use in crucial shipboard systems where failure could result in catastrophic loss of life or vessel. Consequently, the contract mandates rigorous quality controls, including Level I Joint Source Certification, a quality system compliant with ISO-9001 or MIL-I-45208, and strict adherence to technical drawings and specifications such as SAE AMS-QQ-S-763 for CRES material. Key requirements include mandatory First Article Testing (FAT) on one unit, with the FAT report due 180 days after the approval of the purchase request. The contractor must perform hydrostatic pressure tests and non-destructive testing on weldments, with all certification data submitted via Wide Area Workflow (WAWF) for review by Portsmouth Naval Shipyard. The government will perform quality assurance at the source through the Defense Contract Management Agency (DCMA). The award will be made to a single, technically acceptable offeror based on a best-value determination, with past performance weighted as more important than price. The solicitation is a DX-rated order for national defense use and is issued under Emergency Acquisition Flexibilities. Proposals must be submitted in English and U.S. dollars, with a closing date of October 15, 2026. Delivery is FOB Destination, and the final material delivery is required within 365 days of the contract's effective date.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

Steam Cooker (NSN 7310-01-541-8053) SupplierThis subcontract, issued by the Department of Defense Subsistence FSE Supply Chain, requires the procurement of one steam cooker for delivery to the USS Jack H. Lucas in San Diego. The equipment must strictly adhere to NSN 7310-01-541-8053 and the DLA Master List of Technical and Quality Requirements RA001. The supplier is responsible for ensuring the product contains no intentional mercury and complies with the Buy American Act and the Berry Amendment. The contract is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 333310. All items must be packed and marked in accordance with RP001 and MIL-STD-129 standards. Interested parties must have responded by the deadline of October 19, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Custom Rubber Cover FabricationThis subcontract involves the fabrication of 10 custom rubber covers for prime contractors under Defense Logistics Agency supply contracts, specifically for Raytheon Canada Limited part number 204138-001. The manufacturer must adhere to the DLA Master List of Technical and Quality Requirements, ensuring zero non-conformance in accordance with MIL-STD-105/ASQ Z1.4. Production must utilize industrial rubber molding equipment that does not employ Class I ozone-depleting chemicals. Quality assurance for the project is required to meet MIL-STD-1916 or ASQ H1331 standards. The work will be performed in Weslaco, Texas, under NAICS code 333310. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

Precision Optical Lens Manufacturer (NSN 6650-01-577-4445)This subcontract involves the fabrication of high-precision optical instrument lenses, specifically NSN 6650-01-577-4445, for prime contractors supporting the Defense Logistics Agency. The scope of work requires the grinding and polishing of optical glass to adhere to strict geometry and surface quality standards defined by MIL-PRF-13830B. Additionally, the contractor is responsible for conducting First Article Tests and ensuring all items are packaged according to MIL-STD-2073-1E and MIL-STD-129 guidelines. To qualify for this project, manufacturers must maintain ISO 9001:2015 certification and ensure full compliance with ITAR, EAR, and CMMC Level 2 security standards. The final deliverables include the finished lenses and a comprehensive First Article Test report. Performance for this contract is centered in Mechanicsburg, Pennsylvania, under NAICS code 333310.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

Specialized Bearing Component Manufacturing (Full Turnkey)This full turnkey subcontract through the DLA Weapons Support ASC Commodities Division requires the end-to-end manufacture and supply of 18 Retaining Plates, BEA (NSN 3110-01-133-5305). The selected provider is responsible for the entire production process, from sourcing raw materials to delivering the finished product to prime contractors. Performance will take place in Anniston, Alabama, under NAICS code 333310. Strict compliance and certification standards are mandatory for this engagement. The contractor must hold US/Canada Joint Certification Program certification and obtain DLA approval for handling ITAR/EAR data. Additionally, all deliverables must adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 packaging standards to ensure military specifications are met.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

PLATE, IDENTIFICATIO

Solicitation # SPE7L1-27-T-1614

Solicitation SPE7L1-27-T-1614 is a procurement request by the DLA Weapons Support Land Supply Chain for four identification plates, identified by NSN 2590-01-691-5118. This is a Foreign Military Sales requirement for Australia, with a required delivery date of October 22, 2024, and a delivery lead time of five days. The contract specifies FOB Origin terms, with the freight forwarder located in Brisbane, California, and the final shipping destination at the Joint Logistics Unit in Bandiana, Australia. Inspection and acceptance will both occur at the point of origin. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical requirements are governed by the DLA Master List, and the use of Class I ozone-depleting chemicals is strictly prohibited. The procurement is categorized under NAICS 333310 and includes various FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding, and equal opportunity employment. All quotations must be submitted via the DLA Internet Bid Board System by October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7M1-27-T-1039

Solicitation SPE7M1-27-T-1039 is a fixed-price procurement issued by the DLA Weapons Support Maritime Supply Chain for 31 units of Reflex Sights, identified by NSN 1240640010197. The required items are specifically identified as SAAB Dynamics Aktiebolag A175N Part Number 404061258 and must adhere to source-controlled technical data, including Basic Drawing NR 19200 13102259 and Reference Drawing NR 19200 12579607. The required delivery date is July 13, 2027, with shipping terms set as FOB Origin, and both inspection and acceptance will occur at the origin. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and DLA packaging requirement RP001. It incorporates various FAR and DFARS clauses covering safeguarding covered defense information, cyber incident reporting, and prohibitions on the acquisition of certain telecommunications equipment. Invoicing must be processed electronically through the Wide Area WorkFlow system. Offerors must comply with the Buy American Act and Berry Amendment, and those utilizing non-domestic materials must provide full disclosure within their quotes.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

VACUUM FIXTURE, SEAL

Solicitation # SPE7M4-27-T-1343

Solicitation SPE7M4-27-T-1343, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of five vacuum fixture seals, identified by NSN 4921010670444 and part number B71144. This is a Foreign Military Sales requirement for the Netherlands, with delivery terms specified as FOB Origin. The required delivery date is May 3, 2024, with a lead time of 20 days after order. Inspection and acceptance are to take place at the origin. The contract mandates strict adherence to DLA packaging requirements (RP001) and marking standards (MIL-STD-129), with specific packaging data governed by MIL-STD-2073-1E. Key material restrictions include a prohibition on the intentional use of mercury or mercury-containing compounds and class I ozone-depleting chemicals. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various DFARS and FAR clauses, including the Buy American Act and cybersecurity safeguarding standards. The solicitation is categorized under NAICS code 333310.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7M4-27-T-1359

Solicitation SPE7M4-27-T-1359 is a request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of one demagnetizer, identified by NSN 4940-01-025-5009 and part number 10115 from Stancil Corp. The requirement is categorized under NAICS code 333310. The original required delivery date is October 14, 2026, with a delivery window of 10 days after receipt of order. Shipping is to be handled via the fastest traceable means to a destination in Aurora, Colorado, with offers submitted based on FOB Origin. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951, MIL-STD-129, and DLA packaging requirement RP001. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing through the Wide Area Workflow system and registration via the DLA Account Management and Provisioning System. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Quotes must be submitted through the DIBBS portal, and the award may be processed via an automated system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

WASHER-DRYER, HOUSEHOLD

Solicitation # SPE8ED-27-T-0128

Solicitation SPE8ED-27-T-0128 is a total small business set-aside for the procurement of 66 stacked household washer-dryer units under NSN 3510014591387. The required units must feature a large capacity 10 gallon washer with a 1/2 H.P. 115 volt motor and a 240 volt electric heat source, paired with a 1/4 H.P. 115 volt dryer motor. The equipment must adhere to specific nominal dimensions of 74.250 inches in height, 23.875 inches in width, and 26.625 inches in diameter. The contract specifies that mercury or mercury containing compounds shall not be intentionally added to the hardware, with limited exceptions for functional components like batteries or sensors. Delivery is required within 33 days of award, with a need ship date of November 29, 2026, and an original required delivery date of March 13, 2027. Shipping is FOB Origin, with the destination point being DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination per FAR 52.246-1. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. The contractor is required to use the Wide Area WorkFlow system for electronic invoicing and must comply with the Buy American and Balance of Payments Program and the Berry Amendment regarding domestic sourcing.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7L3-27-T-0951

Solicitation SPE7L3-27-T-0951 is issued by the Defense Logistics Agency for the procurement of 10 units of Access Covers, identified by NSN 2590016945732. The requirement is categorized under NAICS code 333310. The contract specifies a need ship date of July 16, 2027, and an original required delivery date of July 20, 2027, with a delivery lead time of 262 days. Terms are set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 for general packaging, MIL-STD-129 for labeling, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List (RA001), and any hazardous materials must be labeled per the Hazard Communication Standard. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act and cybersecurity safeguarding under DFARS 252.204-7012. Quotes must be submitted via the DIBBS portal, and the award may be processed as an automated award with a price evaluation preference for HUBZone concerns.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → JACKSONVILLE BLDG

Same awarding agency

FILTER ASSEMBLY, WATER

Solicitation # SPE8E8-27-T-0244

Solicitation SPE8E8-27-T-0244 is a fixed-price procurement issued by DLA Troop Support, Construction and Equipment for one water purification filter assembly, identified by NSN 4610-01-546-9419. The item is a critical application component based on Parker Hannifin Corporation part number 18460 and must adhere to Technical Data Package Revision A. Delivery is required within 167 days, with a need ship date of April 12, 2027, and an original required delivery date of June 22, 2027. The contract is issued under the First Destination Transportation program with shipping terms set as FOB Origin, delivering to DLA Distribution Jacksonville, Florida. The contractor must comply with strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination, utilizing sampling methods per MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements include electronic invoicing via Wide Area WorkFlow and adherence to various FAR and DFARS clauses, including the Buy American Act and safeguarding of covered defense information. Item Unique Identification is not required for this procurement.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 23 hours ago

DEADLINE

Specialized Lighting Components SupplyThe Specialized Lighting Components Supply subcontract, managed by the Department of Defense through the Jacksonville Bldg, involves the provision of raw materials and off-the-shelf electrical components to prime contractors fulfilling DLA supply contracts. The scope of work includes the delivery of bulbs, lenses, housings, and wiring in strict accordance with Reference Drawing 78286. These items are to be delivered as either bulk materials or component kits directly to the designated assembly facility in Jacksonville, Florida. Compliance requirements include the mandatory provision of Safety Data Sheets for any hazardous materials supplied, adhering to 29 CFR 1910.1200 standards. This procurement falls under NAICS code 334419, with a response deadline set for October 26, 2026.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Inspection Light Assembly ManufacturingThis subcontract for the Department of Defense involves the manufacture, assembly, and inspection of 19 light assemblies to support DLA supply contracts. The contractor is responsible for fabricating units according to Reference Drawing NR 78286 and its revisions, integrating electrical components and housing, and ensuring all packaging meets MIL-STD-129 and RP001 standards. Performance will take place in Jacksonville, Florida, under NAICS code 334510. To be eligible, the provider must maintain CMMC Level 2 certification and ensure full Source Approval Request compliance. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Authorized Distribution of Linear Direction ValvesThis subcontract involves the supply of 31 Linear Direction Valves, identified by NSN 4810016077882, for prime contractors supporting Department of Defense projects at DLA Distribution Jacksonville. The components must be sourced specifically from Transigm or Sikorsky and delivered FOB Origin. To ensure quality and compliance, the provider must hold AS9120 certification and provide proof of authorized distribution. All units must adhere to strict military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Linear Direction Valve Manufacturing (CSI)This subcontract involves the manufacture and supply of 31 Linear Direction Valves for prime contractors supporting DLA Distribution Jacksonville projects. The required units must meet the specifications for either Transigm Inc part number 512900-3 or Sikorsky Aircraft Corporation part number 70310-03104-103, specifically under NSN 4810016077882. A critical production requirement is that these components must be produced without the use of additive manufacturing. To be eligible, the provider must hold AS9100 certification and ensure full compliance with the Buy American Act and the Berry Amendment. The work will be performed in Jacksonville, Florida, under NAICS code 332912 for the Department of Defense. Responses to this solicitation are due by October 26, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Supply of Metal Cutting Band Saw Blades (NSN 3455-00-277-3550)This subcontract involves the manufacture and supply of flexible back metal cutting band saw blades for prime contractors supporting DLA Troop Support. The required blades must feature standard raker tooth geometry, measuring .250 inches in width and .025 inches in thickness with 24 TPI, provided in 100-foot coils. The total order consists of 79 coils, which must be packaged according to ASTM-D-3951 and MIL-STD-2073-1E standards. The contract is managed by the Department of Defense through the Jacksonville building and requires strict adherence to A-A-51125B and ASME B94.51M specifications. Additionally, all supplies must comply with the Buy American Act and the Berry Amendment. The performance of this contract will take place in Jacksonville, Florida, under NAICS code 332216.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

Supply of Air Conditioning Filter Media (NSN 4130-01-174-1656)This subcontract involves the manufacture and supply of 621 units of air conditioning filter media under NSN 4130-01-174-1656 for prime contractors supporting DLA Troop Support. The Department of Defense requires all materials to be produced or sourced in accordance with the DLA Master List of Technical and Quality Requirements, with strict adherence to the Buy American Act and the Berry Amendment. All deliverables must be packaged according to ASTM D3951 and MIL-STD-129 standards and delivered to Jacksonville by January 15, 2027. The project falls under NAICS code 333415 and is managed through the Jacksonville building office.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

VALVE, LINEAR, DIRECTION

Solicitation # SPE7MC-27-T-0722

Solicitation SPE7MC-27-T-0722 is a fixed-price request for the procurement of 31 units of Linear Direction Valves, identified as NSN 4810016077882 and designated as a Navy Identified Critical Safety Item. The requirement specifies hardware from Transigm Inc (P/N 512900-3) or Sikorsky Aircraft Corporation (P/N 70310-03104-103). Delivery is required within 445 days, with a need ship date of January 15, 2028, and a final delivery date of January 20, 2028, to DLA Distribution Jacksonville, Florida. Inspection and acceptance will occur at the origin. Offerors must comply with strict quality and material standards, including SAE AS9100 for manufacturers and AS9120 for distributors. The contract mandates adherence to the Buy American Act and the Berry Amendment, with a reduced threshold of 150,000 dollars. Packaging must follow MIL-STD-2073-1E and marking must align with MIL-STD-129. Notably, items produced via additive manufacturing are ineligible for award. Administrative requirements include electronic invoicing through Wide Area WorkFlow and mandatory registration via the Account Management and Provisioning System for Vendor Shipment Module access. Small business joint ventures must provide specific representations under DoD Class Deviation 2023-O0001, and HUBZone concerns may be eligible for price evaluation preferences.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

BLADE, BAND SAW, METAL C

Solicitation # SPE85-27-T-0230

Solicitation SPE85-27-T-0230 is a request for quotations from the Department of Defense, specifically DLA Troop Support, for the procurement of 79 coils of metal cutting band saw blades under NSN 3455-00-277-3550. The required blades must be flexible back with a standard raker tooth, measuring .250 inches in width and .025 inches in thickness, with 24 teeth per inch and a coiled length of 100 feet per coil. Compliance with technical specifications A-A-51125B and industry standard ASME B94.51M is mandatory. Delivery is required within 167 days after order, with a need ship date of April 12, 2027, and a required delivery date of February 15, 2027. The contract mandates destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331, where acceptance is based on zero non-conformances. Packaging must adhere to ASTM-D-3951 and MIL-STD-2073-1E, with shipment marking following MIL-STD-129 and property identification per MIL-STD-130N. Invoicing must be processed electronically through the Wide Area WorkFlow system. Key regulatory requirements include adherence to the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. The procurement is fully competitive and includes price evaluation preferences for certified HUBZone small businesses.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

LIGHT ASSEMBLY, INSPECT

Solicitation # SPE8E7-27-T-0144

Solicitation SPE8E7-27-T-0144 is a federal procurement issued by the Defense Logistics Agency for the acquisition of 19 units of Light Assembly, Inspection, identified by NSN 6220-01-554-2399. The contract is managed under the First Destination Transportation program with a delivery timeline of 454 days, establishing a need ship date of January 24, 2028. Inspection and acceptance will occur at the source, conducted by the Defense Contract Management Agency (DCMA) Phoenix, with Stefan Renoth serving as the primary contract administrator. The procurement is subject to stringent technical and regulatory requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls. Packaging must adhere to DLA requirements RP001 and MIL-STD-129, with specific mandates for hazardous materials per FED-STD-313 and TQ requirement IP025. Administrative operations, including invoicing and payment requests, are to be processed electronically through the Wide Area WorkFlow system. The solicitation is open to various small business set-asides and requires adherence to the Buy American Act and the Berry Amendment.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

FILTER MEDIA, AIR CONDI

Solicitation # SPE8E8-27-T-0233

Solicitation SPE8E8-27-T-0233 is a procurement request by the Department of Defense, specifically DLA Troop Support Construction and Equipment, for 621 units of air conditioning filter media under NSN 4130-01-174-1656. The contract is established as FOB Origin under the First Destination Transportation program, with a required delivery date of January 15, 2027, and a need ship date of December 2, 2026. Inspection and acceptance will occur at the destination, with the delivery timeframe specified as 36 days after award. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List of Technical and Quality Requirements take precedence. Specific material restrictions apply, including the Buy American Act, the Berry Amendment, and a prohibition on the intentional addition of mercury or mercury-containing compounds. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with DFARS cybersecurity standards for safeguarding covered defense information. Quotations must be submitted through the DLA Internet Bid Board System by October 26, 2026.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

ACTUATOR, ELECTROMECHAN

Solicitation # SPE7MC-26-T-308Q

Solicitation SPE7MC-26-T-308Q, issued by DLA Land and Maritime, is for the procurement of three electromechanical rotary actuators, identified by NSN 4810-01-585-2146 and Curtiss-Wright Flow Control Corporation part number 6612/2-S688-100. The requirement falls under NAICS code 336413. Delivery is required by October 2, 2027, with a need ship date of March 23, 2027, and a delivery lead time of 160 days after order. The terms are FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Jacksonville, Florida. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including specific requirements to preserve bare metal and lubricate moving parts. Compliance with cybersecurity standards is required, specifically CMMC Level 2 Self-Assessment and safeguarding of covered defense information. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must comply with the Buy American Act, the Berry Amendment, and prohibitions on the use of additive manufacturing unless specifically authorized.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS