Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Weather Station and Monitoring Components

Active

State & Local

Response Deadline09/10/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Putnam County Board of Commissioners is seeking to procure a weather station and associated monitoring components including TWM, ICM, and TSMs to support smart irrigation control and promote water conservation. The requirement is structured as a subcontract under NAICS code 334516 and is open for responses until September 10, 2026. The equipment will be used to collect real-time environmental data for optimizing irrigation systems, reducing water waste, and enhancing resource efficiency across county-managed landscapes. The place of performance and specific delivery details are not fully defined in the posted data, but the system must be capable of reliable field operation and integration with existing or planned smart irrigation platforms. All proposals must meet technical specifications for accuracy, durability, and data transmission capabilities to ensure effective long-term monitoring and water management outcomes.

General Info

Putnam County seeks weather station system for smart irrigation and water conservation by September 2026.

Agency

Georgia → Putnam County Board of CommissionersView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

GA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineSep 10

Submission deadline

Response Deadline

09/10/2026, 08:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGeorgia → Putnam County Board of Commissioners

ContactsNo contacts available

OfficeN/A

Organization / Agency

Georgia → Putnam County Board of Commissioners

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of a weather station and related monitoring components (TWM/ICM/TSMs) for smart irrigation control and water conservation.

Similar Contracts

Same NAICS industry code

DETECTOR, METAL FLAW

Solicitation # SPE4A5-26-T-326N

The contract pertains to the procurement of two Metal Flaw Detectors, part number 23036190, under NSN 6635-01-717-8633, issued by the Department of Defense through DLA. The delivery is required within 171 days from the contract award, with shipment FOB origin and final inspection conducted at the destination. The entire shipment must comply with stringent packaging standards outlined in ASTM D3951, though DLA Master List of Technical and Quality Requirements override any conflicting provisions. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA-specific packaging guidelines. The unit of issue is each, with no variance allowed in quantity, and the delivery address is the DDSP New Cumberland Facility in Pennsylvania. Sampling and quality verification must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes not explicitly defined are treated as major with a verification level of IV or AQL of 1.0. The contract incorporates all relevant technical and quality requirements from the DLA Master List, which control over any other referenced standards. The supplier must ensure complete removal of government identification from non-accepted items. The point of contact for inquiries is Brandy Coward, and the solicitation response deadline was August 12, 2026, with a required ship date of January 31, 2027, and original delivery expected by June 19, 2027.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

University of Calgary - Advanced Contract Award Notice / Notice of Proposed Procurement - Load Cell Dual Microhardness Tester System

Solicitation # AB-2026-05475

The University of Calgary is seeking to procure a fully integrated, load-cell-based micro/macrohardness testing system designed for automated Vickers and Knoop hardness measurements, with capabilities for spatial hardness mapping, advanced image analysis, automated reporting, and seamless data export. The system must deliver high-precision testing across a wide range of materials and hardness scales, supporting research and industrial applications through reliable, repeatable measurements and comprehensive data handling. The procurement is being conducted under solicitation number AB-2026-05475, with a response deadline of August 11, 2026, at 5:00 PM MT, and is currently at the presolicitation stage to gather industry input prior to full solicitation. The contract will be awarded by the University of Calgary, with performance expected to occur in Alberta, and all inquiries should be directed to Michael Oiring, Senior Procurement Specialist, via email or phone.

University of Calgary

POSTED

about 12 hours ago

DEADLINE

Portable Threat-Detection Postal Scanner Supply

W7NF Uspfo Activity Mi Arng

POSTED

about 15 hours ago

DEADLINE

Supply of Steris Autoclave Unit with AMSCO 600LS Steam SterilizerThe contract entails the procurement and delivery of a Steris Autoclave Unit equipped with an AMSCO 600LS Medium Steam Sterilizer, featuring an integrated steam generator that enables independent operation without reliance on external steam sources. This equipment is destined for the Boise VA Medical Center to enhance sterilization capabilities critical for medical safety and workflow efficiency. The unit must meet all technical and operational specifications to ensure reliable, compliant sterilization of surgical instruments and medical devices in a high-demand healthcare environment. The contract is classified as a subcontract under NAICS code 334516, indicating it pertains to medical equipment manufacturing. It was posted on August 4, 2026, with a response deadline set for August 7, 2026, suggesting a tight turnaround for submissions. The originating agency is the Department of Veterans Affairs through Rpo East (36C24E), and while specific performance location details are not provided, the delivery and installation are explicitly intended for the Boise VA Medical Center. The procurement supports the VA’s mission to maintain rigorous infection control standards by modernizing critical sterilization infrastructure.

Rpo East (36C24E)

POSTED

about 15 hours ago

DEADLINE

Commercial Electrical Performance Monitoring System SupplyThe contract entails the supply of a commercially available electrical performance monitoring system designed for in-situ reliability testing of advanced packaging interposers, encompassing both an electrical analyzer and current-stress components necessary for comprehensive performance evaluation under operational conditions. The system must be fully functional, ready for immediate deployment, and capable of delivering precise, real-time data to assess the long-term reliability and integrity of interposer technologies used in high-performance electronic packaging. This subcontract, issued by the Department of Commerce NIST, has a response deadline of August 19, 2026, and was posted on August 4, 2026, under NAICS code 334516, which pertains to the manufacturing of electronic instrumentation. There is no set-aside designation, and the place of performance and point of contact details are unspecified, indicating flexibility in delivery and execution. The contract is intended to support advanced research and testing capabilities within the NIST framework, requiring the supplier to deliver a complete, integrated solution that meets defined technical requirements without customization or modification.

Department Of Commerce Nist

POSTED

about 15 hours ago

DEADLINE

Sources Sought Optical Spectrum Analyzer

Solicitation # NB688000-26-02467

The National Institute of Standards and Technology (NIST) is conducting market research to identify vendors capable of supplying an Optical Spectrum Analyzer that meets specific technical requirements outlined in the attached specifications. This sources sought notice is not a solicitation, request for quotation, or binding commitment to award a contract; it is solely intended to gather information on potential suppliers before determining the appropriate acquisition method. Responses must include the company providing the product, the manufacturer’s name, and the country where the product is manufactured, along with capability statements limited to four pages containing product data sheets, typical lead times, and any additional relevant information. Proprietary information should be clearly marked, and no quotes will be accepted or considered at this stage. The requirement is classified under NAICS code 334516, with a small business size standard of 1,000 employees, and NIST is evaluating whether a small business set-aside opportunity exists based on responses received. All responsible sources—regardless of size—are encouraged to respond, but responses must demonstrate that the product can meet the stated specifications. The agency will use the collected information to inform future procurement decisions and determine if competition can be limited to small businesses if at least two qualified ones respond. Responses must be submitted electronically to Lisa Stevens at lisa.stevens@nist.gov no later than August 14, 2026, and must not include marketing brochures. The product’s country of origin is a critical piece of information for compliance and sourcing considerations.

Department Of Commerce Nist

POSTED

about 15 hours ago

DEADLINE

Metrology-grade Chilled Mirror Dew Point Hygrometers

Solicitation # 1333ND26QNB680396

The National Institute of Standards and Technology (NIST), under the U.S. Department of Commerce, is soliciting two metrology-grade chilled mirror dew point hygrometers to enhance precision in laboratory measurements for national mass calibration standards. The equipment must meet stringent technical specifications including dew point accuracy of ±0.1°C, temperature accuracy of ±0.07°C, and reproducibility of ±0.05°C across both parameters, with a measurement range of –60°C to +20°C dew point and 0.1% to 100% relative humidity. Units must be new, shipped in original manufacturer packaging, and include all software and documentation; used, remanufactured, or gray-market items are prohibited. Delivery is required FOB destination to NIST’s Gaithersburg, Maryland facility within six to twenty weeks after receipt of order, with inspection and acceptance conducted onsite by NIST technical personnel based on verification of performance, physical dimensions, power requirements, and operational features such as RS-232 interface, PTFE sample circuit, and 3-stage thermoelectric cooling. Quotations must be submitted as firm-fixed-price offers in four electronic volumes: Technical Quotation demonstrating compliance with all technical requirements, Demonstrated Experience detailing three or more recent projects involving materially similar sputter coater systems, Price Quotation submitted separately via email, and Terms and Conditions acknowledging all solicitation provisions. Offerors are required to comply with FAR clauses 52.212-1, 52.212-3, 52.212-4, and 52.212-5, and must certify adherence to security requirements under FAR 52.204-25 and FAR 52.240-91, including avoidance of covered telecommunications equipment from prohibited entities. Noncompliance must be disclosed within 72 hours. The award will be made on a best-value trade-off basis, prioritizing technical capability and demonstrated experience over price, with no discussions anticipated. All submissions must be sent electronically to forest.crumpler@nist.gov and donald.collie@nist.gov by August 11, 2026, referencing solicitation number 1333ND26QNB680396, and must include the UEI and CAGE code. Invoices must be processed through the U.S. Treasury’s Invoice Processing Platform or directly to INVOICE@

Department Of Commerce Nist

POSTED

about 15 hours ago

DEADLINE

6515--Research Equip (LAMb) - Medium Steam Sterilizer - BOISE | EDA: 9/25/26

Solicitation # 36C24E26Q0086

The Department of Veterans Affairs, Boise VA Medical Center, plans to procure a Steris Autoclave Unit with AMSCO 600LS Medium Steam Sterilizer on a sole source basis under FAR 6.302-1 due to its unique integrated steam generator, which is not available in competing models. This feature ensures a reliable and independent steam supply, critical for consistent sterilization cycles and minimizing operational downtime unrelated to building infrastructure limitations. The unit’s chamber dimensions are specifically suited to accommodate up to four caging systems simultaneously, significantly enhancing workflow efficiency compared to other available alternatives, and its compatibility with existing caging setups makes it the only viable option for current operations. This notice of intent is not an invitation for competitive bids, but responsible sources may submit capability statements by August 7th, 7 AM EST to Stacy Taylor at Stacy.Taylor@va.gov, with no telephone inquiries accepted. The government retains full discretion to proceed without competition based on responses received. The solicitation number is 36C24E26Q0086, with a NAICS code of 334516, and the procurement is managed by the RPO East office under the Department of Veterans Affairs, with the point of contact listed as Lynn M Portman.

Rpo East (36C24E)

POSTED

about 15 hours ago

DEADLINE

Argon Ion Mill Polishing System

Solicitation # N0017326Q5265

The Naval Research Laboratory intends to award a sole source purchase order to NANOSCIENCE INSTRUMENTS for an Argon Ion Mill Polishing System and accessories under the NAICS code 334516, with a size standard of 1000 employees, and the Federal Supply Code 6640. This acquisition will be conducted using Simplified Acquisition Procedures in accordance with FAR 12.201-1, as the estimated value does not exceed the $350,000 threshold. The procurement is not open for competitive bidding, as the agency has determined that only this one source can meet its specific requirements. Interested parties may submit information within fifteen calendar days of the notice's publication demonstrating why competitive procurement would benefit the government, but such submissions must include clear and convincing evidence; responses will be evaluated solely to determine whether competition is warranted, and the government retains full discretion over its decision. No reimbursement will be provided for costs incurred in submitting capability information. The point of contact for all correspondence is Richard Key, whose email must be used in all communications, and the solicitation number N0017326Q5265 must be referenced in the subject line. The notice was posted on August 4, 2026, with a response deadline of August 6, 2026, and the performance location is in Washington, D.C.

Naval Research Laboratory

POSTED

about 15 hours ago

DEADLINE

6640-- QUANTStudio 5 Real Time PCR system

Solicitation # 36C24626Q0805

The Department of Veterans Affairs, through VISN 6 Network Contracting Office 6, is conducting market research under a Sources Sought notice to determine commercial availability and contractor capabilities for the acquisition of two Applied Biosystems QuantStudio 5 Real-Time PCR Systems, along with annual preventative maintenance and quality assurance services, to replace existing 7500 Fast Dx instruments. This is not a solicitation and no binding contract will result from responses; the purpose is solely to assess market capacity, identify qualified sources—including small businesses registered in the SBA’s Dynamic Small Business Search—and inform future procurement decisions. The requirement is strict: only the original Applied Biosystems QuantStudio 5 system will be accepted, with no substitutions or equivalents permitted, due to the need for compatibility with existing validated workflows, reagents, software, and laboratory procedures. The contract includes trade-in of the current instrument, full installation, training, warranty, and compliance with all manufacturer specifications. Responses must detail the company’s SAM registration, SBA small business status, relevant certifications, and a capabilities statement confirming the ability to meet all technical and service requirements, including proper calibration, performance verification using RNase P plates, system diagnostics, computer maintenance, and timely submission of service documentation within one hour of completion. The NAICS code is 334516 with a size standard of 1,000 employees, and responses will inform potential set-asides under 38 U.S.C. 8127 and 8128 for Service-Disabled Veteran Owned Small Businesses and Veteran Owned Small Businesses if the rule of two is satisfied. All submissions must be emailed to Krisanne Dernago by August 12, 2026, at 10:00 a.m. EST, and failure to register in SAM or the SBA DSBS database will disqualify consideration. The Government reserves the right to modify the Performance Work Statement and will only issue a formal solicitation if market research indicates sufficient competition and suitability.

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 15 hours ago

DEADLINE

6640--NEW - CTX Quant Studio 7 Pro Laboratory Equipment

Solicitation # 36C25726Q0816

The Department of Veterans Affairs is seeking to procure one Applied Biosystems QuantStudio 7 Pro Real-Time PCR System or an equally capable alternative through a firm-fixed-price contract under commercial acquisition procedures. The equipment will be delivered and installed at the Central Texas Veterans Health Care System in Temple, Texas, to support advanced molecular research aimed at understanding biological differences between Veteran and civilian populations, with a focus on personalized medicine. The contract includes a base period for delivery, installation, and on-site training, followed by four optional one-year periods for annual preventive maintenance services, potentially extending the contract to five years total. The requirement is specified on a brand-name-or-equal basis, allowing alternatives that meet or exceed the technical performance criteria outlined in the Statement of Work, provided offerors submit detailed comparative documentation. This acquisition is unrestricted and open to all responsible sources, with no set-aside for small, veteran-owned, or other socioeconomic categories, following a market research determination that a reasonable expectation does not exist for two or more qualified Veteran-Owned Small Businesses to submit competitive offers at a fair price. The procurement follows FAR Part 12 commercial item procedures and incorporates applicable VA Acquisition Regulation deviations and RFO FAR guidance. Evaluation will be based on best-value or lowest-price technically acceptable criteria, with technical acceptability assessed against the prescribed salient characteristics. All offerors must comply with standard certifications including Buy American Act and Trade Agreements Act requirements, as well as security prohibitions. The contract is managed by the Department of Veterans Affairs Network Contracting Office 17 in San Antonio, with delivery and performance occurring at the Olin E. Teague VA Hospital in Temple, Texas.

257-NETWORK Contract Office 17 (36C257)

POSTED

about 15 hours ago

DEADLINE

111 liters of He3 gas

Solicitation # 80NSSC26939449Q

This contract is a sole source requirement for the procurement of 111 liters of helium-3 gas, intended for specialized applications under NASA’s purview. The solicitation, identified by number 80NSSC26939449Q, was posted on August 4, 2026, and responses are due by August 6, 2026, with no set-aside provisions applicable. The procurement falls under NAICS code 334516, indicating it involves the manufacturing of instruments and related products for measuring and testing. The contract is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with the office located at Stennis Space Center in Mississippi. The gas must be delivered to a performance location in California, specifically in the 94035 zip code area. Shanna Patterson serves as the primary point of contact, reachable via email at shanna.l.patterson@nasa.gov, and all communication and submissions must align with the strict sole source nature of this requirement.

NASA Shared Services Center

POSTED

about 15 hours ago

DEADLINE

More opportunities from Georgia → Putnam County Board of Commissioners

Same awarding agency

Supply of Valves and Valve BoxesPutnam County Board of Commissioners is seeking subcontractors to supply a range of valves and valve boxes for water system control and maintenance operations. The contract encompasses various valve types including aboveground and underground models, manual operation valves, pressure reducing valves, air and vacuum release valves, and quick couplers, all intended to support infrastructure reliability and access. Valve boxes are also required to provide secure and efficient access points for routine maintenance and inspections. This procurement falls under NAICS code 332912, indicating a focus on other fabricated metal product manufacturing, and is structured as a subcontract with a response deadline of September 10, 2026. The solicitation was posted on August 4, 2026, and is open to qualified vendors capable of meeting technical specifications and delivery timelines for the specified products in Georgia.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Supply of Sprinklers and RotorsThe contract involves the supply of GOLF Series rotors, sprinklers, and swing joints to meet precise design requirements for complete water coverage across the designated area. All products must conform to established technical specifications to ensure optimal performance and compatibility within the irrigation system. The solicitation is classified as a subcontract under NAICS code 332999, indicating it pertains to other fabricated metal product manufacturing. The Putnam County Board of Commissioners in Georgia is the contracting entity, with responses due by September 10, 2026, at 8:00 PM Eastern Time. The place of performance and specific delivery location are not detailed in the provided data, but the work is expected to support a public infrastructure project under the county’s jurisdiction. Interested parties must submit proposals prior to the deadline to be considered for award.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Supply of Irrigation Control System (Central Controller & Interface)The contract involves the supply of a 2-wire central control system designed to manage irrigation across all nine holes of a golf course or similar facility, including necessary controllers, radio transceivers, and dedicated control wiring, along with a functional interface for system operation and monitoring. The system must support reliable, integrated communication between central components and field devices to ensure efficient water distribution and system-wide coordination. This subcontract is issued by the Putnam County Board of Commissioners in Georgia under NAICS code 335313, which pertains to irrigation system manufacturing, and is open for response until September 10, 2026. All equipment and installation must meet technical specifications required for seamless operation within the existing infrastructure, with performance expected to occur at the facility managed by the contracting authority.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Supply of HDPE Piping and FittingsThe contract involves the supply of HDPE DR 11 pipe along with a range of associated fittings made from PVC, HDPE, ductile iron, steel, and brass for the main line and distribution network of an irrigation system. The work is intended to support infrastructure development for water distribution, requiring materials that meet technical specifications for durability, pressure ratings, and compatibility within an irrigation context. All components must be compatible with each other and suitable for long-term underground or buried installation under varying environmental conditions. The solicitation is categorized as a subcontract with a response deadline of September 10, 2026, and was posted on August 4, 2026. The North American Industry Classification System code 325211 indicates the focus is on plastic pipe and profile product manufacturing. The contracting entity is the Putnam County Board of Commissioners in Georgia, though specific performance location and point of contact details are not provided. Bidders must ensure compliance with all material standards and delivery requirements outlined in the full solicitation through the provided state portal link.

Plastics Material and Resin Manufacturing

POSTED

about 11 hours ago

DEADLINE

in about 1 month

26-61301-001 Irrigation Materials for Uncle Remus Golf Course

Solicitation # PE-77002-NONST-2026-000000011

Putnam County is seeking sealed bids for irrigation materials to install a new system at Uncle Remus Golf Course under Solicitation Number 26-61301-001. Bids must be submitted using the official proposal form included in the bid package, which is available exclusively through the county website at www.putnamcountyga.us/rfps. All proposals are due by 3:00 p.m. on Thursday, September 10, 2026, and will be opened publicly at that time. Bids remain valid for 60 business days from submission. The county strongly encourages applications from locally owned, minority-owned, women-owned, and operated businesses. Putnam County reserves full discretion to reject any or all bids, waive minor procedural inconsistencies, and award the contract based on what it determines to be in its lowest cost or best overall interest. The point of contact for inquiries is Lynn Butterworth, reachable by phone at 706-485-5826 or email at lbutterworth@putnamcountyga.us.

Farm Supplies Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

in about 1 month