SUPPORT, FRAME

The contract, identified by solicitation number SPE4A5-26-T-142F, is for the procurement of a SUPPORT, FRAME item under a simplified acquisition process through the Defense Logistics Agency. The item, with NSN 1560004518298 and part number 204-030-662-005, is classified as a commercial item and requires delivery of three units to DLA Distribution Cherry Point in North Carolina, with delivery to be fulfilled within 171 days after order placement, targeting an original delivery date of April 14, 2028. The FOB term is origin, but inspection and acceptance occur at destination. Packaging must comply with ASTM D3951 for non-hazardous materials or TQ requirement IP025 if hazardous per FED-STD-313, and all packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement (RP001). Unit of issue is each, with zero tolerance for quantity variance, and palletization must follow specified DLA standards. The item is not required to have Item Unique Identification per customer request. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances accepted unless otherwise stipulated. Critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0 respectively. The contract imposes stringent cybersecurity and compliance obligations. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 is required through a self-assessment, and the contractor must implement safeguards for covered defense information as mandated by DFARS 252.204-7012. Additional cybersecurity controls are required under NIST SP 800-171 DOD Assessment Requirements. The contractor must also comply with regulations prohibiting hexavalent chromium, controlled hazardous material storage, and the acquisition of certain covered telecommunications equipment or services. Export-controlled items are subject to DFARS 252.225-7048, and all hazardous materials must be properly labeled per OSHA’s Hazard Communication Standard with Safety Data Sheets submitted in compliance with Federal Standard No. 313. The contractor must affirm small business status, provide a Unique Entity Identifier