Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SUPPORT, PELVIC

Active
SPE2DS-26-T-322WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 16 units of a pelvic support binder, item NSN 6515-01-560-0290, designed for emergency pelvic stabilization. The device is black, one-size-fits-all, and intended for single-use only, with a temporary use window of 24 to 48 hours. It is engineered to stabilize the pelvis, reduce pain, and protect against pelvic hematomas, and must be cut to fit each patient individually. All units must be packaged in sealed, commercial-grade containers that protect against damage, and shipped in suitable exterior containers ensuring safe, cost-effective delivery to Fort Stewart, Georgia, under a 20-day delivery timeline. The product must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all packaging and labeling must adhere to DLA requirements. Technical and quality standards referenced through R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The bid must clearly state the supplier source and part number, and the solicitation is subject to Covered Defense Information protocols. The contract was issued by the Department of Defense under solicitation SPE2DS-26-T-322W, with responses due by August 17, 2026, and primary point of contact is Colin Owens.

General Info

Procure 16 single-use pelvic binders for Fort Stewart, GA, meeting DLA standards, due August 17, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

BLDG 1509 WEST 6TH STREET, FORT STEWART, GA, 31314-5185, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-322W.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
COLIN OWENS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SUPPORT,PELVIC
SUPPORT, PELVIC
PELVIC BINDER; COLOR: BLACK; FOR EMERGENCY
PELVIC STABILIZATION; PROTECTS PELVIC HEMATOMA;
PROVIDES PAIN RELIEF; ONE SIZE FITS ALL, CUT TO
FIT FOR EACH PATIENT; ONE TIME USE ONLY; FOR
TEMPORARY PELVIC STABILIZATION, 24 TO 48 HOUR USE
UNIT OF ISSUE: EACH
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SPE2DS-26-T-322W
SECTION B
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-560-0290 Quantity: 16 EA Purchase Request: 7017773053QTY: 16 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
ROBE, DRESSING
Solicitation # SPE2DH-26-T-5875
The contract is for a premium collarless patient examination robe designed for unisex use in size X Large, constructed from poly/cotton fashion poplin fabric with long sleeves, a large hang loop, and a detached belt featuring extra-large loops for enhanced adjustability. The robe includes two large inset pockets and a left breast pocket, with contrasting piping detailing and a navy color scheme. It measures 47.75 inches in length and 64 inches in sweep. The item is packaged in quantities of 12 per package, with a total purchase requirement of two packages. The National Stock Number is 6532-01-706-3685, and delivery is required within 20 days of award. All supplies must comply with DLA packaging requirements and technical/quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Government identification must be removed from non-accepted supplies per RQ011. The solicitation, identified as SPE2DH-26-T-5875, was posted on August 9, 2026, with responses due by August 17, 2026, under NAICS code 339113, managed by the Department of Defense’s Medical Supply Chain FSH, with performance to be delivered to APO 09094-3219, and primary point of contact being Tina Vu at DLA.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
LITTER, RIGID, SEA-AIR, M
Solicitation # SPE2DS-26-T-324M
The contract calls for the procurement of two rigid sea-air medical evacuation litters, designated by NSN 6530-01-187-0104, with a delivery requirement within 20 days after award. Each litter measures 80 inches in length and 16.5 inches in width, constructed with a stainless steel or corrosion-resistant metal frame and a special cloth stretcher, designed to be folded in half, hoisted vertically or horizontally, backpacked, and carried without hands, enabling transport into confined spaces. The litters must be orange in color and include a urethane-coated carrying case. Mercury or mercury-containing compounds are strictly prohibited unless used in functional components such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions. Bidders are required to provide the source and part number of the litters being offered. The solicitation, issued under SPE2DS-26-T-324M with a response deadline of August 17, 2026, is managed by the Department of Defense’s Medical Supply Chain, with the place of performance in Jacksonville and primary point of contact Lisa Thomas-Wright.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
FLOOR MAT, MEDICAL, A
Solicitation # SPE2DH-26-T-5882
The floor mat is a heavy-duty, medical-grade absorbent pad measuring 31 inches by 40 inches, designed specifically for high-fluid surgical environments to keep operating room floors dry and safe. It is engineered to instantly adhere to flooring surfaces without sliding, shifting, or bunching during procedures, ensuring stability even under foot traffic or movement of equipment like Mayo stands and carts. The mat effectively absorbs saline, blood, vomit, urine, and other bodily fluids while remaining waterproof and leakproof, preventing cross-contamination and enhancing sanitation. Constructed with 3 liters of absorbent material per pad, it is flame resistant and features an adhesive backing that sticks firmly to the floor but does not transfer residue to surgical gloves, enabling easy and safe removal. The gray-colored pads are suitable for use in operating rooms, scrub sinks, lab stations, and veterinary clinics, meeting stringent healthcare cleanliness standards. The product is sold in cases of twenty pads each, with the unit of issue being a case. The NSN is 6530-01-727-2135 and the purchase request number is 7017719769 for a quantity of five cases. Delivery is required within 20 days of award. The solicitation, identified as SPE2DH-26-T-5882, was posted on August 9, 2026, with a response deadline of August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with packaging and supply handling subject to DLA standards. The contract falls under NAICS code 339113 and is managed by the Department of Defense through the Medical Supply Chain FSH office, with performance delivery designated to Houston, Texas, 77090-6916. All inquiries should be directed to Tina Vu, the primary point of contact at Tina.Vu@dla.mil or 445-737-1120.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
DRESSING, COMPRESSION, T
Solicitation # SPE2DS-26-T-323C
This item is a sterile, flat-fold compression dressing designed for one-handed use in emergency trauma situations involving arterial bleeding and severe hemorrhaging in limbs. It features a 4-inch wide by 60-inch long elastic bandage and an 8-inch wide by 10-inch long absorbent pad, all packaged in a compact 4-inch by 6-inch by 0.6-inch unit weighing 3.6 ounces. The dressing meets TAA compliance standards and is intended for immediate, effective application under any condition to control life-threatening bleeding. Each unit is individually wrapped and must have a minimum 60-month shelf life, with no more than nine months elapsed between the manufacturer’s production date and the delivery date to the government. The item is identified by NSN 6510-01-598-8418 and is being procured in quantities of 20 units under solicitation SPE2DS-26-T-323C, with a delivery deadline of 20 days after award. The procurement falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain division, with performance occurring at Fort Drum, New York. Technical and packaging requirements are governed by DLA’s Master List, and government identification must be removed from any non-accepted supplies. The contract point of contact is Kendall Jones at DLA.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
HARNESS ASSEMBLY, MASK,
Solicitation # SPE8E6-26-T-4162
The contract pertains to the procurement of a harness assembly for an oxygen mask, identified by part number 460-190-457 and NSN 4240-01-392-6079, with a quantity of ten units to be delivered FOB origin within twenty days. The supplier, Interspiro Inc., is required to comply with all technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and governed by the revision in effect at the time of solicitation or award. Packaging must adhere to MIL-STD-2073-1E, with specific methods including preservation, labeling, and containment standards, and must follow MIL-STD-129 for marking, strictly prohibiting the use of plastics for wrapping or cushioning where feasible. Delivery is to be made to the Southwest Regional Maintenance Center in San Diego, with hazardous material shipping instructions directing delivery to Building 3322T, and parcel post is explicitly prohibited; shipping must occur via the fastest traceable method. Inspection and acceptance occur at the destination with no variance allowed in quantity. The contract, issued under solicitation SPE8E6-26-T-4162, carries a unit price of $10.00 for a total value of $100.00 and includes restrictions on the handling of covered defense information. The required delivery date is August 10, 2026, and the contract includes specific government use codes for tracking and logistics.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLE
Solicitation # SPE2DS-26-T-322S
The contract specifies the procurement of 2 packages of disposable cotton tip applicators, each package containing 500 units, for use in Pap smear testing. Each applicator is sterile, 16 inches in overall length, and must meet stringent packaging and labeling standards as defined by Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must ensure protection from damage during transit, with individual units sealed in suitable containers and grouped in commercial shipping containers optimized for low-cost, safe delivery to Fort Stewart, Georgia. The product must have a minimum shelf life of 36 months, with no more than five months having elapsed between the manufacturer’s date and the delivery date to the government, and all labels must clearly display the manufacturer date, expiration or retest date, and contract or lot number in accordance with MMS1A guidelines. The NSN 6515-01-331-5477 applies, delivery is required within 20 days of award, and bidders must provide the source and part number being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling. All procurement is subject to DLA packaging standards and the removal of government identification from non-accepted supplies.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
PAD, HEAT TREATMENT
Solicitation # SPE2DH-26-T-5865
The product is a disposable heat treatment pad designed for instant and consistent pain relief through heat therapy, activated by simply squeezing and kneading. It is constructed with food-grade sodium acetate and non-toxic materials free of DEHP and natural rubber latex, ensuring safety for direct skin application. Measuring 6 by 9 inches, each pad is single-use and intended for disposal after one application. The unit of issue is a case of 16 pads, with storage recommended at room temperature. The product is identified by NSN 6530-01-724-0439 and is procured under solicitation SPE2DH-26-T-5865, with a response deadline of August 17, 2026, and a delivery requirement of 20 days after order award. The procurement falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain FSH, with performance at Luke Air Force Base, Arizona. Technical and quality requirements are governed by the DLA Master List, and packaging must comply with DLA standards. Removal of government identification from non-accepted supplies is also required. Point of contact for the solicitation is Tina Vu at Tina.Vu@dla.mil or 445-737-1120.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
AIRWAY, NASOPHARYNGE
Solicitation # SPE2DS-26-T-325W
The contract specifies the procurement of a disposable and sterile nasopharyngeal airway device designed with the Robertazzi design, sized at 28FR, measuring 15 centimeters in length, and featuring a bevel tip constructed from plastic vinyl tubing and a plastic tip. The unit of issue is a box containing ten units, and the item is identified by the NSN 6515-01-446-1818. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA packaging regulations, and government identification must be removed from non-accepted supplies. Bidders are required to provide their CAGE code and part number for the offering. The solicitation number is SPE2DS-26-T-325W, issued on August 9, 2026, with a response deadline of August 17, 2026. The contract is categorized under NAICS code 339113, managed by the Department of Defense’s Medical Supply Chain, with performance required at a location in Groton, Connecticut, and delivery must be completed within five days of award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-325E
The contract is for 30 packages of sterile adhesive bandages, each package containing 100 units measuring 0.75 inches by 3 inches in flesh or clear color, with a two-piece removable facing material for easy application and removal. Each bandage consists of a sterile dressing affixed to a plastic adhesive strip and must maintain a shelf life of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and delivery to the government. The item is identified by NSN 6510-00-597-7469 and is subject to strict technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. Packaging must comply with DLA procurement guidelines, and government identification must be removed from non-accepted supplies. Delivery is required within five days of award to Moody AFB, Georgia, under solicitation SPE2DS-26-T-325E, issued on August 9, 2026, with responses due by August 17, 2026. Primary point of contact is Anh Lam of the Department of Defense, Medical Supply Chain, with direct communication available via phone and email. This is a federal procurement under NAICS code 339113 with no set-aside designation.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
AX, EMERGENCY ESCAPE
Solicitation # SPE8E6-26-T-4164
The contract pertains to the procurement of one unit of an emergency escape and rescue device under NSN 4240-01-518-6839 and part number 1234073, sourced from Pierce Manufacturing Inc in Appleton, WI. Delivery is required within 20 days of contract award, with shipment FOB origin, and no variance in quantity is permitted. The item must be delivered to Fort Bragg, North Carolina, with specific freight and marking instructions requiring traceable shipping methods—parcel post is prohibited. Packaging must comply with either ASTM D3951 for non-hazardous materials or TQ requirement IP025 if classified as hazardous under FED-STD-313, with all labeling and palletization strictly adhering to MIL-STD-129 and DLA Packaging Requirements RP001. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting commercial standards. The item is intended for government use only, with the delivery point, shipping address, and mark-for location all matching the same Fort Bragg facility. The contract was issued under solicitation SPE8E6-26-T-4164 with a required delivery date of August 5, 2026, and the vendor must adhere to strict documentation controls including unit of issue, quantity per unit pack, and government-use identifiers. A designated point of contact is provided for inquiries, and the acquisition falls under NAICS code 339113 for other transportation equipment manufacturing. Compliance with DLA’s eProcurement system and use of the approved unit of issue as defined in the official DLA Excel file is mandatory. The requirement is for a single unit, and final acceptance occurs at the destination upon inspection.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 339113
New
DIBBS
TEST STRIPS, GLUCOSE
Solicitation # SPE2DS-26-T-326C
The contract is for Prodigy AutoCode blood glucose test strips, a no-coding solution compatible with all Prodigy pocket meters, utilizing oxidase technology for safer and more accurate results without GDH-PQQ technology. The strips feature capillary action for automatic blood sample intake and are approved for alternate site testing. Each box contains 50 strips, and the unit of issue is BX. The item is classified as a TYPE I (CODE M) medical supply with a non-extendable shelf life of 24 months, requiring that no more than three months have passed from the date of manufacture to the date of delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must clearly display the date of manufacture, expiration date, and contract or lot number. Packaging must be commercial grade, sealed, and capable of protecting the contents during transit, with exterior shipping containers ensuring safe and cost-effective delivery under the lowest carrier rates. The item is subject to DLA packaging requirements and removal of government identification from non-accepted supplies, and the solicitation number is SPE2DS-26-T-326C, issued by the Department of Defense under NAICS code 339113. The contract requires delivery of two boxes to Williamsburg, VA, within five days of award, with technical and quality specifications incorporated from the DLA Master List of Technical and Quality Requirements.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
SPECTACLES, INDUSTRIAL
Solicitation # SPE8E6-26-T-4172
The contract pertains to the procurement of industrial spectacles under NSN 4240-01-729-1698 and part number 4-0030-9001, with a requirement for five units to be delivered within twenty days from the contract award date. Delivery is specified FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is allowed. Packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container configurations, while marking follows MIL-STD-129 with no special marking codes applied. Palletization must adhere to DLA packaging requirements, and the shipment is destined for Fort Wainwright, Alaska, with the freight and marking instructions directed to the same location. The contract is governed by technical and quality requirements from the DLA Master List, and covered defense information provisions apply. The unit price is $5.00 per unit, resulting in a total price of $25.00, and the solicitation is issued under contract number SPE8E6-26-T-4172 with a response deadline of August 20, 2026, and a required delivery date of August 11, 2026. The contract references DLA procedures for transportation and contains government-specific identifiers for tracking and administrative use.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
HANDLE, LARYNGOSCOPE
Solicitation # SPE2DS-26-T-325V
The contract solicits a small pediatric laryngoscope handle made of chrome-over-brass, designed for use with a fiber optic laryngoscope blade and powered by a AA battery, with a unit of issue of one each. The item is identified by NSN 6515-01-396-4249 and is requested in a quantity of one unit for delivery within 20 days of award. The solicitation, numbered SPE2DS-26-T-325V, was posted on August 9, 2026, with responses due by August 17, 2026, under the NAICS code 339112 for medical equipment manufacturing. The purchasing agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance required at Laughlin AFB, Texas, and the primary point of contact is Michael Small. Bidders must specify the source and part number being offered and are required to comply with all referenced technical and quality specifications from the DLA Master List, packaging standards, and procedures for removing government identification from non-accepted supplies.
Surgical and Medical Instrument Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CATHETER AND NEEDLE UN
Solicitation # SPE2DS-26-T-324C
The contract specifies the procurement of a sterile disposable intravenous catheter and needle unit in 18 gauge size with a 1.25 inch length, identified by NSN 6515-01-718-5456 and packaged in boxes of fifty. The product must meet stringent shelf-life requirements, including a non-extendable 36-month shelf life from the date of manufacturer, with no more than five months elapsed between the manufacture date and delivery to the government. All packaging and labeling must comply with the latest revision of MMS1A, clearly displaying the date of manufacture, expiration or retest date, and the contract and lot number. The item is classified as a TYPE I (CODE Q) item under RS020 and must adhere to DLA packaging standards and other technical and quality requirements referenced in the DLA Master List. The contract requires bidders to clearly identify the source and part number being supplied and mandates removal of government identification from non-accepted supplies. Delivery is required within five days of award, with the place of performance specified as Fort Lewis, Washington. The solicitation was issued on August 9, 2026, with responses due by August 17, 2026, under contract number SPE2DS-26-T-324C, managed by the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
DEFIBRILLATOR TEST, DIS
Solicitation # SPE2DS-26-T-323X
The contract pertains to the procurement of a defibrillator test and discharge resistor with two leads, specifically designed for discharging capacitors in the defibrillation circuit of the ZOLL PROPAQ MD device, used exclusively for troubleshooting purposes. The item is issued individually, with a single unit required under the NSN 6515-01-691-7585, and must be delivered within 20 days of award. Bidders are required to clearly state the source and part number being supplied to ensure compatibility and compliance with technical specifications. The solicitation, identified as SPE2DS-26-T-323X, is issued by the Department of Defense under the Medical Supply Chain MD Surg Fsf, with performance to occur at Scott AFB, Illinois. It incorporates technical and quality requirements referenced in the DLA Master List, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Packaging must meet DLA standards, and government identification must be removed from rejected supplies. Covered defense information may apply, and all responses must be submitted by the deadline of August 17, 2026. Point of contact for inquiries is Brooke Webb, reachable via email or phone.
Surgical and Medical Instrument Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
PAD, ABDOMINAL
Solicitation # SPE2DS-26-T-325A
The product is an abdominal pad composed of multiple layers including absorbent fibers backed by a nonabsorbent fiber layer, covered with gauze or nonwoven fabric, with an alternative construction using cellulose wadding backed by nonabsorbent cotton and similarly covered. Each unit is packaged in a case of 144 pads and must maintain a shelf life of 36 months from manufacture, with no more than six months elapsed between manufacture and delivery to the government. All containers must be clearly marked with the lot or control number and the date of manufacture, prefixed with MFD. The item is identified by NSN 6510-01-271-7671 with a purchase quantity of six cases and a delivery requirement of 63 days after order award. The solicitation number is SPE2DS-26-T-325A, issued on August 9, 2026, with proposals due by August 17, 2026, under NAICS code 339112 for medical device manufacturing. The contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance occurring at APO ZIP 96260-5479 and primary point of contact Anh Lam via email and phone. The procurement follows DLA packaging requirements and incorporates technical and quality standards listed in the DLA Master List, with applicable revisions governed by the solicitation or amendment date. Government identification must be removed from any nonaccepted supplies.
Surgical and Medical Instrument Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, ACUPUNCTURE
Solicitation # SPE2DS-26-T-323F
The contract is for the procurement of acupuncture needles specified as silver plated spiral wound handle, 0.35mm diameter by 75mm length, manufactured from sterile, disposable stainless steel and identified by the NSN 6515-01-673-6604, with a unit of issue of one box containing 100 needles. The technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, which must be reviewed in its version effective on the solicitation issue date or award date, depending on the acquisition type. Packaging must comply with DLA packaging standards, and government identification must be removed from any supplies not accepted. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-323F, was posted on August 9, 2026, with a response deadline of August 17, 2026, and is categorized under NAICS code 339112 for medical equipment manufacturing. It is a federal procurement under the Department of Defense, managed by the Medical Supply Chain MD Surg FSF, with performance delivery set for Hampton, Virginia, 23665-2040. The single purchase request calls for one box, with delivery required within 20 days of award. Primary point of contact is Dorothy Marquis at the provided email and phone number, and all bids must be submitted through the DIBBS portal prior to the deadline. Covered defense information may apply, and compliance with all applicable technical, quality, and packaging provisions is mandatory for acceptance.
Surgical and Medical Instrument Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 621410
New
DIBBS
CULTURE MEDIA, SALMONEL
Solicitation # SPE2DS-26-T-322Z
This contract pertains to the procurement of Culture Media, specifically Salmonella Shigella Agar and Xylose Lysine Deoxycholate Agar, identified by NSN 6550-01-358-3835 and manufacturer part number R02140 from REMEL INC. The items are classified as Type I (Code A) with a strict non-extendable shelf-life of one month and require refrigeration between 2 and 8 degrees Celsius throughout storage and transport. The product is regulated by the FDA and must be supplied with full disclosure of the source and part number. Packaging must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and all units must be sealed in commercial containers designed to prevent damage, with exterior shipping containers suitable for safe delivery via common carrier at the lowest cost. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. Delivery is required FOB destination within 20 days, and the packaging must adhere to MIL-STD-2073-1E standards. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contract falls under a federal solicitation with NAICS code 621410 managed by the Department of Defense’s Medical Supply Chain. Covered Defense Information may apply, and bidder information must be submitted to the product specialist via EBS for FDA confirmation prior to award.
Family Planning Centers

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 334510
New
DIBBS
CONNECTOR, SURGICAL
Solicitation # SPE2DS-26-T-325F
The contract pertains to the procurement of a surgical connector made from corrosion-resistant metal, specifically a Diamond O2 quick connector with a DISE male fitting and check valve, designed for use with oxygen tubing. Each unit is sold individually, with a total order quantity of ten units identified by the NSN 6515-01-457-0271 and required for delivery within five days of award. The item falls under the NAICS code 334510 and is part of a federal solicitation issued by the Department of Defense’s Medical Supply Chain, with performance located in San Antonio, Texas. All units must be packaged in sealed commercial containers that protect against damage and meet the Medical Marking Standard No. 1, which supersedes MIL-STD-129. Shipping containers must ensure safe delivery via common carrier at the lowest feasible rate, and all packaging must comply with DLA packaging requirements. The product is subject to Defense Information that may be controlled, and technical and quality compliance standards referenced as R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders are required to specify the source and part number being offered, and the solicitation’s response deadline is August 17, 2026.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 327992
New
DIBBS
DENTAL KIT, EMERGENCY
Solicitation # SPE2DS-26-T-325D
The DENTAL KIT, EMERGENCY is a standardized medical supply containing a dental exam mirror, dental stick, toothbrush, toothpaste, dental floss, cotton-tipped applicators, oil of cloves, temporary cavity filling material, aspirin, and a gauze pad, all packaged as a single unit for immediate use. The kit must be delivered to the government within two months of manufacture and is subject to strict shelf-life requirements as a TYPE I (CODE H) item with a non-extendable 12-month shelf life. The product is regulated by the FDA, and bidders must provide the manufacturer name, part number, and source details, with the specified part number being 700014 from MYHRE'S EXPLORATION PRODUCTS, INC. All packaging must comply with commercial standards and MIL-STD-2073-1E, and items must be marked in accordance with Medical Marking Standard No. 1, ensuring protection from damage and safe transport via common carrier to the delivery point at Travis Air Force Base, California. The unit of issue is each (EA), with a contract quantity of one unit, delivery due within 20 days FOB destination, and no variance allowed in quantity. The solicitation falls under NAICS code 327992 and is governed by DLA technical and quality requirements referenced in the DLA Master List, with the contracting official required to submit an FDA referral through EBS including all manufacturer and bidder details.
Ground or Treated Mineral and Earth Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CEMENT, ORTHOPEDIC SURG
Solicitation # SPE2DS-26-T-325Z
The contract specifies the procurement of a radiopaque orthopedic surgical cement set, supplied as a unit of issue containing ten each of sterile powder and liquid monomer components. Each set includes a 40-gram sterile powder mixture of polymethyl methacrylate, methyl methacrylate styrene copolymer, and barium, along with a 20-milliliter sterile liquid monomer ampule. The product must have a shelf life of 36 months, with no more than five months elapsed between the date of manufacture and delivery to the government. All packaging must meet commercial standards, with each unit sealed in a protective container to prevent damage and shipped in suitable exterior containers optimized for safe, low-cost delivery to the specified point in Williamsburg, Virginia. Markings on all containers must include the lot or control number and date of manufacture preceded by “MFD” and conform to Medical Marking Standard No. 1, which replaces MIL-STD-129. The material is classified as hazardous, requiring compliance with 49 CFR and ICAO regulations for transport, and a current Material Safety Data Sheet (MSDS) must accompany each shipment and be submitted electronically to DLA.MSDS@DLA.MIL with the required cover sheet. The NSN is 6515-01-153-5275, the solicitation number is SPE2DS-26-T-325Z, and delivery is required within five days after delivery order.
Surgical and Medical Instrument Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
BLADE, SURGICAL KNIF
Solicitation # SPE2DS-26-T-324X
The contract specifies the procurement of 3 packages, each containing 10 detachable surgical knife blades, totaling 30 units, under NSN 6515-01-538-8302, with delivery required within 5 days FOB destination to Camp Pendleton, California. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, overriding any general standards like ASTM D3951, and must adhere strictly to Medical Marking Standard No. 1, which replaces MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport by common carrier at the lowest cost. The blades must include a safety locking system for maximum protection during handling and use. Marking and labeling must follow MMS No. 1 guidelines, and parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. The contract requires zero variance in quantity, with inspection and acceptance occurring at the destination. The solicitation number is SPE2DS-26-T-324X, with a response deadline of August 17, 2026, and the item is classified under NAICS code 339112 for surgical appliance and supply manufacturing. The delivery point is governed by government addresses provided, and the order is subject to covered defense information protocols.
Surgical and Medical Instrument Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details