Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SUPPORT, SHIPPING AN

Active
SPE8ED-26-T-1175Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract covers the procurement of four units of a Rack Storage and Transport Frame with part number RSTF and NSN 8145015121019, supplied by SHARKCAGE INC. under solicitation SPE8ED-26-T-1175. Delivery is required within ten days of contract award, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, specifically at Fort Bragg, North Carolina. All packaging must conform to ASTM D3951 and be marked and labeled per MIL-STD-129, while palletization must adhere to DLA’s packaging requirements identified as RP001. The DLA Master List of Technical and Quality Requirements takes precedence over any general standards and includes referenced technical identifiers such as R, I, RC, RD, and RQ. Freight must be shipped by the fastest traceable means, excluding parcel post, with the shipment designated as RDD 555. The item is authorized under the DoD unit of issue, with the unit of measure being each, priced at $4.00 per unit for a total of $16.00. The delivery must be completed no later than July 22, 2026, and all packaging and documentation must comply with government-specific identification and traceability protocols. The point of contact for inquiry is Ogden Howard, with a designated government use identifier and tracking reference for logistics coordination.

General Info

DLA seeks four units of NSN 8145-01-512-1019 via solicitation SPE8ED-26-T-1175, due August 6, 2026, through DIBBS.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERSView Agency

NAICS

332439 - Other Metal Container ManufacturingView NAICS

Place of Performance

BLDG Y5015 MMD BLVD, FORT BRAGG, NC, 28310, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8ED-26-T-1175 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS
View Agency Profile
Office AddressUS
Contacts
Ogden Howard
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SUPPORT,SHIPPING AN
RACK STORAGE AND TRANSPORT FRAME
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
P/N: RSTF
SHARKCAGE (54TC1)
SAN ANTONIO TX
SHARKCAGE INC. 54TC1 P/N RSTF
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017607622 0001 EA 4.000
NSN/MATERIAL:8145015121019
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE8ED-26-T-1175
SECTION B
PR: 7017607622 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W81YT4
W6YB USALRCTR FT BRAGG
CL IX SITE AWCF SSF
BLDG Y5015 MMD BLVD
FORT BRAGG NC 28310
US
RDD 555 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W81YT4
W6YB USALRCTR FT BRAGG
CL IX SITE AWCF SSF
BLDG Y5015 MMD BLVD
FORT BRAGG NC 28310
US
MARKFOR
W81YT4
W6YB USALRCTR FT BRAGG
CL IX SITE AWCF SSF
BLDG Y5015 MMD BLVD
FORT BRAGG NC 28310
US
M/F: (TCN) W81YT461960358
RDD: 555
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026
SPE8ED-26-T-1175 NSN/Part Number: 8145-01-512-1019 Quantity: 4 EA Purchase Request: 7017607622QTY: 4 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332439
New
DIBBS
Supply of Strapping & E-Track Kit for 20-Foot MILVAN ContainerThe contract requires the supply and delivery of a single Strapping & E-Track Kit, identified by part number 016 and national stock number 8145-01-524-7268, specifically designed for use with a 20-foot MILVAN container. The kit must meet all applicable military packaging standards to ensure durability, safety, and compatibility with government transportation and storage protocols. Delivery is to be made FOB origin, meaning the contractor assumes responsibility for the item until it is loaded onto the initial carrier at their facility, after which risk and cost transfer to the government. The designated destination is Fort Riley, Kansas, with a zip code of 66442-0000, and the item is intended for military logistics applications. The solicitation falls under the NAICS code 332439 and is classified as a subcontract, with no set-aside provisions specified. The posting date is July 26, 2026, and responses are due by August 6, 2026, with all submissions required to be submitted through the DIBBS platform via the provided link. The contracting entity is the Department of Defense under the organization name Construction & Equipment Containers, indicating this is part of a broader effort to maintain standardized cargo securing systems across the military’s containerized transportation network. No point of contact information is provided within the data, and all communication or inquiries must be directed through the DIBBS portal.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
Military-Grade Packaging & Preservation ServicesThe contract requires the provision of Level A1 preservation and packaging services in strict accordance with MIL-STD-2073-1E and labeling that meets the specifications of MIL-STD-129 for the shipment of military hardware to the Defense Logistics Agency. All work must ensure long-term protection against environmental degradation during transport and storage, with precise adherence to military standards for materials, methods, and documentation. The packaging must be designed for secure handling, transit, and long-term readiness in operational environments, and labeling must include all required data elements to support accurate identification, inventory control, and distribution. This is a total small business set-aside subcontract under NAICS code 332439, open exclusively to qualified small businesses as defined by the SBA. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, and performance is to be conducted at Robins Air Force Base, Georgia, with a specific zip code of 31098-1887. The contracting activity falls under the Department of Defense, managed by the Warner Robins office, and all deliverables must be fully compliant with federal military logistics standards to support DLA’s supply chain requirements.
WARNER ROBINS

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
CONTAINER, FULL MILThe contract pertains to the procurement of a Strapping & E-Track Kit for a 20-foot MILVAN container, identified by NSN 8145-01-524-7268, with a total quantity of one kit. The delivery must occur within 20 days from the contract award, FOB origin, with zero variance allowed in quantity and inspection and acceptance points set at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and all packaging and labeling must adhere to MIL-STD-129. Palletization must follow DLA Packaging Requirements for Procurement, and the unit of issue is specified as a kit. The shipment must be sent via the fastest traceable means, excluding parcel post, with the delivery addressed to Fort Riley, Kansas, under RDD 777 and Project TP 2. The contract is governed by SPE8ED-26-T-1174, with a required delivery date of July 22, 2026, and the supplier must be aware that covered defense information may apply. The contract references the DLA Master List of Technical and Quality Requirements, and the unit of issue is defined per official DoD and ANSI X12 standards. All government identification must be removed from non-accepted supplies per RQ011, and the supplier is identified as Pikes Peak Cargo Secure Inc, located in Colorado Springs, Colorado.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
MOBILITY TOWBAR, ISUThe contract solicitation SPE8ED-26-T-1178 is issued by the Defense Logistics Agency under the Department of Defense to procure one unit of a Mobility Towbar, ISU, identified by NSN 8145013857290 and part number 60040-001, from AAR Manufacturing Inc dba AAR Mobility. The delivery is required within 20 days of the acceptance delivery order, with FOB Origin terms meaning title and risk transfer to the government at the contractor’s facility in Cadillac, MI. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and palletization must follow RP001 guidelines. Labeling and marking must conform to MIL-STD-129, including mandatory 2D Data Matrix barcodes for traceability, and all hazardous materials must be labeled per OSHA’s Hazard Communication Standard. Shipment must be sent via the fastest traceable means to Ellsworth AFB, SD, with parcel post explicitly prohibited. The delivery address and government receipt point are both located at Ellsworth AFB, with inspection and acceptance occurring at origin by government personnel under FAR 52.246-2. Payment must be submitted electronically via Wide Area WorkFlow, and the contract includes clauses on sustainable products, hazardous material safety, trafficking in persons, employment eligibility verification, cybersecurity safeguarding, export control, and prohibitions on covered defense telecommunications equipment and hexavalent chromium use. The contractor must comply with all applicable FAR and DFARS clauses, including those requiring representation of small business status, disclosure of covered defense equipment, whistleblower rights, and electronic invoicing. No option quantities or contract extensions are specified; the award is expected under simplified acquisition procedures, likely on a lowest price technically acceptable basis. The solicitation closes on August 6, 2026, and all responses must be submitted via the DIBBS portal. The contracting officer’s representative and payment office details will be provided upon award, with full accounting data linked to the DoDAAC.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
SUPPORT, SHIPPING ANSharkCage Inc. is contracted to supply two units of cradle kit, part number 150475 with NSN 8145-01-512-1025, under solicitation SPE8ED-26-T-1173, with a total contract value of $2.00 per unit, delivered FOB origin within ten days. All packaging must comply strictly with ASTM D3951 and MIL-STD-129 labeling requirements, subject to overriding DLA Master List of Technical and Quality Requirements identified by R and I numbers, including RP001 for packaging, RQ011 for removal of government identification from non-accepted supplies, and RC001 for source approval documentation. The delivery destination is Fort Bragg, NC, with no tolerance for quantity variance. Shipment must be sent via the fastest traceable method, excluding parcel post, and palletization must adhere to DLA’s RP001 standards. The items are to be inspected and accepted at the destination point, with marking and documentation following DLA directives. Government use identifiers and tracking information, including RDD 555, PROJ TP 2, and TCN W81YT461960336, are included for logistics control. The original required delivery date is July 22, 2026, with no need date specified, and the contract is governed by DoD procurement protocols and unit of issue standards as referenced by official DLA links.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
CONTAINER, STRAP 4 IThe contract specifies the procurement of 23 units of a 4-inch vehicle recovery container, identified by NSN 8145-01-533-5616 and purchase request 7017585134, at a unit price of $23.00, for a total value of $529.00. Delivery is required within 107 days from the contract date, with shipment originating from the supplier and delivered FOB origin to the receiving warehouse at 25600 S CHRISMAN ROAD, Tracy CA 95304-5000. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence and must be followed, including marking and labeling per MIL-STD-129. Packaging must comply with RP001 DLA Packaging Requirements and palletization standards, and the unit of issue is each (EA) with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and government identification must be removed from any non-accepted supplies. The solicitation number is SPE8ED-26-T-1177, with a response deadline of August 6, 2026, and the original required delivery date is November 23, 2026. Transportation procedures follow DLAD Proc Notes C19 and C20, and the point of contact is Ogden Howard at DLA.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
SPRING, FLATThis contract pertains to the procurement of a flat spring component identified by NSN 5360012659378 and part number 111-249-030-360-001, with a quantity of eight units to be delivered FOB origin within 53 days, with zero tolerance for quantity variance. The item is classified as a critical application item and must comply with strict DLA packaging requirements based on MIL-STD-2073-1E, including packaging method 10, clean and dry conditions, unit container type 10, and intermediate container code D3. Marking must conform to MIL-STD-129 with no special marking codes applied, and palletization must adhere to DLA’s procurement packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item except in specified functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA, and any portable devices containing mercury must include shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. Delivery is directed to Arizona Industries for the Blind in Phoenix, Arizona, with the required ship date set for November 4, 2025, and the original delivery date of November 9, 2025. The solicitation, issued under contract number SPE7L1-26-T-879J, is governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The unit of issue is each, priced at $8.00 per unit, totaling $64.00, and all specifications align with DoD procurement directives, including transportation guidelines outlined in DLAD procedural notes.
LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
SUPPORT, SHIPPING ANThe contract pertains to the supply of two units of RAPID ISO BRACING with part number 16114545 and NSN 8145015121023, sourced from SHARKCAGE INC. in San Antonio, TX, under solicitation SPE8ED-26-T-1172. Delivery is required within ten days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, specifically at Fort Bragg, NC, with shipment required via the fastest traceable means, explicitly excluding parcel post. Packaging must comply with ASTM D3951 and MIL-STD-129, while all labeling, palletization, and unit of issue specifications must align with DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting standards. The unit of issue is each (EA), priced at $2.00 per unit, for a total of $4.00. The contract mandates strict adherence to DLA packaging and marking directives under RP001 and includes compliance with technical and quality requirements identified by R or I numbers from the DLA Master List. The item is designated for the W81YT4 site at Fort Bragg, with the shipping address, markfor details, and point of contact clearly defined. The required delivery date is July 22, 2026, and the contract references additional internal identifiers including RDD 555, Project TP2, and government-only codes for tracking and disposition. Source approval documentation must be submitted per RC001, and the contract may involve covered defense information subject to RD003. All contractual obligations are governed by the version of the DLA Master List active on the solicitation issuance date, and the acquisition adheres to federal procurement protocol with no set-aside designation.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
SLED
Truck Customization and Attachment IntegrationThe contract involves the full installation, fabrication, and integration of loader and grapple attachments onto truck chassis, requiring significant hydraulic and structural modifications to ensure the vehicles are fully operational and field-ready upon delivery. The work demands precision engineering to align the attachments with the chassis integrity, maintain payload capacity, and ensure safe and reliable performance under operational conditions. All systems must be thoroughly tested and verified to meet rigorous field standards without the need for additional on-site adjustments. The contract is classified as a subcontract under NAICS code 332439, with a posting date of July 24, 2026, and a response deadline of August 13, 2026. It is managed by the Mississippi Department of Finance and Administration under the agency name MPTAP, with no specified place of performance or point of contact listed. The solicitation is accessible through a public portal, and interested parties must submit proposals prior to the deadline to be considered for award.
MPTAP

POSTED

3 days ago

DEADLINE

in 17 days
View Details
NAICS: 332439
New
SLED
Dump Body Construction & InstallationThe contract calls for the fabrication and installation of dump bodies constructed from 3/16-inch AR400 steel, designed to meet rigorous durability standards for heavy-duty use. Each unit must include a fully integrated vibrator system to prevent material buildup, a custom tailgate seal to ensure leak-free operation, and a hydraulic hoist capable of achieving a full 180-degree dumping angle for maximum efficiency and safety. The work involves both manufacturing the components to specified engineering requirements and on-site installation, ensuring seamless integration with existing vehicle platforms. The solicitation is issued as a subcontract under the Mississippi Department of Finance and Administration, with the North American Industry Classification System code 332439 indicating specialized metal fabrication. Responses are due by August 18, 2026, and the project is open to qualified subcontractors without a set-aside designation. Performance location details are not specified, but all work must comply with the technical and operational standards outlined in the contract. Interested parties may access the full solicitation through the provided state portal for additional specifications and submission guidelines.
MPTAP

POSTED

3 days ago

DEADLINE

in 22 days
View Details
NAICS: 332439
New
Federal
Supply of GSA Class 5 IPS ContainersThe contract calls for the supply of GSA-approved Class 5 Information Protection System containers designed to safeguard classified materials within secure environments, ensuring compliance with federal security standards for physical protection of sensitive information. This subcontract is designated as a Total Small Business Set-Aside under SBA rules, meaning only small businesses are eligible to compete, and it falls under NAICS code 332439, which corresponds to the manufacturing of metal lockers and safes. The solicitation was posted on July 24, 2026, with responses due by 5:00 PM EDT on July 30, 2026, and the award will be managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense. The containers must meet stringent GSA Class 5 specifications for intrusion resistance, fire resistance, and tamper protection to support secure storage of classified materials in military and defense operations.
Navsup Flt Logistics Ctr Puget Sound

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAGThis contract issued by the Department of Defense through DLA Aviation at Philadelphia seeks to procure shipping and storage containers under solicitation number SPRPA126RVC05, with a response deadline of August 13, 2026. The primary item is a polyethylene container manufactured via rotational molding, conforming to Container Research Corporation drawing number 838E001, latest revision, and associated specifications including MIL-I-45208. All units must be uniquely identified with a UID in data matrix format per MIL-STD-130, and each must be affixed with a nameplate encoded with a contract-specific serial number format. The contractor is responsible for all tooling, fixtures, and manufacturing aids, and must ensure welding complies with AWS D1.1, D1.2, D1.3, and D1.6 standards depending on material, with strict controls on filler materials, deoxidization procedures, and cleaning methods—prohibiting sodium hydroxide and iron-containing abrasives. Desiccant requirements, coating specifications, and leak testing protocols are detailed, including a pneumatic pressure test allowing no more than 0.05 PSIG loss over 30 minutes and an 18-inch free-fall drop test to validate structural integrity. A mandatory First Article Test (FAT) is required for new manufacturers, with one unit to be submitted within 120 calendar days of contract award for comprehensive evaluation including dimensional checks, leak tests, form and fit validation, and drop testing—all at the contractor’s expense. Government testing costs are estimated at $12,000 and will be factored into pricing. Fat samples are generally not returned and are destroyed during testing; if returned, they cannot be counted as production units unless refurbished and approved. Offerors with prior approved production of the same item within three years, using identical facilities and processes, may request a waiver of FAT requirements, provided they submit two distinct prices—one with and one without FAT compliance. The contract mandates adherence to Buy American provisions, prohibits cadmium plating in favor of zinc-nickel alloy finishes, requires compliance with IPC/EIAJ-STD-001C if MIL-STD-454 is referenced, and imposes strict controls over materials, work instructions, and quality documentation. Packaging must follow MIL-STD-2073, and all shipping to test facilities is the contractor's responsibility. Failure to meet FAT deadlines or approval criteria may constitute
Pa DLA Aviation At Philadelphia

POSTED

3 days ago

DEADLINE

in 17 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Same awarding agency

NAICS: 484220
New
DIBBS
Transportation and Delivery Logistics (FOB Origin)The contract mandates the transportation and delivery of 95 military containers from the manufacturer’s location to a designated government destination under FOB Origin terms, meaning the buyer assumes responsibility for the goods once they leave the seller’s facility. The contractor is responsible for all aspects of freight movement, including proper load securement to ensure the integrity and safety of the containers during transit, as well as providing official delivery confirmation upon arrival at the specified destination in New Cumberland, Pennsylvania, with ZIP code 17070-5002. The work is classified under NAICS code 484220, indicating it pertains to heavy and trailer truck transportation. This is a subcontract opportunity issued by the Department of Defense, under the organization name Construction & Equipment Containers, with responses required by August 6, 2026, and the solicitation originally posted on July 26, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Palletization, and Marking ServicesThe contract requires full compliance with military packaging, pallet loading, and container marking standards as defined by DLA RP001 and MIL-STD-129, ensuring all items are securely unitized and properly labeled with Unique Identifier (UID) and National Stock Number (NSN) markings. All work must meet rigorous Department of Defense specifications for durability, traceability, and logistical readiness, with emphasis on secure handling and standardized identification to support military supply chain integrity. The service includes end-to-end packaging operations from containment to pallet configuration, ensuring items are ready for immediate deployment and global distribution. This subcontract is focused on performance at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. It is classified under NAICS code 493190, indicating warehousing and storage services, and was posted on July 26, 2026, with a response deadline of August 6, 2026. The contracting authority is the Department of Defense under the organization name Construction & Equipment Containers, and bidders must align with all federal procurement requirements for military-grade logistics support without any set-aside designations specified.
Other Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Material Compliance & Labeling ServicesThe contract titled Hazardous Material Compliance & Labeling Services requires the identification, labeling, and documentation of hazardous materials in strict adherence to DFARS and OSHA regulations. This includes the accurate preparation of hazard warning documentation to ensure all materials are properly marked and reported according to federal safety and defense standards. The work is focused on ensuring compliance throughout the handling and storage process, with particular attention to regulatory accuracy and operational safety protocols. The contract is structured as a subcontract under NAICS code 541620 and is associated with the Department of Defense through the organization Construction & Equipment Containers. It is performance-based, with the place of performance located in New Cumberland, Pennsylvania, at zip code 17070-5002. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026, with the full details accessible via the provided DIBBS link. There is no specified set-aside type, and no point of contact information is provided in the available data.
Environmental Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332311
New
DIBBS
Manufacturing of Shipping and Storage ContainersThe contract requires the fabrication of 95 military-spec shipping and storage containers adhering to federal and Defense Logistics Agency technical standards, ensuring rigorous durability, environmental resistance, and full compatibility with military logistics systems. All units must meet stringent performance criteria to withstand extreme conditions during transport and long-term storage in operational environments, with strict quality control measures to guarantee compliance throughout the manufacturing process. The work is categorized under NAICS code 332311 and is designated as a subcontract, with performance required at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026, with the Department of Defense through its Construction & Equipment Containers office overseeing the procurement. All contractors must demonstrate proven capability in producing defense-grade containers and be prepared to meet exacting documentation, testing, and delivery timelines to support military readiness and supply chain requirements.
Prefabricated Metal Building and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 531020
New
DIBBS
Packaging and Transportation of Military SuppliesThe contract requires the provision of comprehensive packaging, marking, and transportation logistics for military supplies, with strict adherence to ASTM D3951, MIL-STD-129, and Defense Logistics Agency standards. All packaging and labeling must meet federal specifications to ensure compatibility with military supply chains, including proper identification, unit packing, and documentation to support global deployment and inventory management. While the government retains full responsibility for transportation costs and associated risks, the contractor is solely accountable for the accuracy, quality, and compliance of all packaging and marking activities prior to handoff. The work is specifically tied to performance at Fort Bragg, North Carolina, with a NAICS code of 531020 indicating classification under Other Supporting Activities for Transportation. This is a subcontract opportunity under the Department of Defense, with a response deadline of August 6, 2026. The contracting office is part of the Construction & Equipment Containers division, and all deliverables must align with DLA directives to guarantee seamless integration into defense supply networks. Timely submission of proposals and full compliance with technical requirements are mandatory for consideration.

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract seeks services to ensure full compliance with hazardous materials regulations, specifically requiring the preparation and submission of hazard warning labels that meet the standards of 29 CFR 1910.1200 and the DFARS clause 252.223-7001. This includes all necessary coordination with the contracting officer to obtain pre-award approval for label designs, ensuring that all hazard communications are accurate, compliant, and properly documented prior to any deployment or delivery. The scope emphasizes strict adherence to federal safety and labeling requirements for materials handled under Department of Defense contracts. This subcontract is issued under NAICS code 541690 and is performance-based at Fort Bragg, North Carolina, with a response deadline of August 6, 2026. The work supports the Department of Defense’s Construction & Equipment Containers office and is intended to facilitate safe handling, storage, and transportation of hazardous materials in military operations. Timely submission of compliant labels and proactive communication with contracting officials are critical to meeting contractual obligations and avoiding delays or penalties.
Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332211
New
DIBBS
Supply of Rapid Iso Bracing UnitsThe contract involves the procurement and delivery of Rapid Iso Bracing Units identified by NSN 81450121023, with all required compliant packaging, labeling, and proper hazardous material handling procedures to ensure safety and regulatory adherence throughout the supply chain. The units must be fully delivered to Fort Bragg, North Carolina, with the final inspection conducted by the government at the destination to verify conformance to specifications. The solicitation is classified as a subcontract under NAICS code 332211, issued by the Department of Defense through the Construction & Equipment Containers organization, with responses due by August 6, 2026. The contract was posted on July 26, 2026, and all logistical and compliance requirements must be met without exception to fulfill the delivery obligations for this military location.
Cutlery and Flatware (except Precious) Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details