This Solicitation opportunity from Department Of Defense was posted on May 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
SUPPORT, STRUCTURAL
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This contract under solicitation SPE4A5-26-T-136P is for the procurement of one unit of a structural support item identified by part number 5-96297-38 and NSN 1560015465072, to be delivered to Tinker Air Force Base, Oklahoma within five days after award. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override commercial standards such as ASTM D3951. Non-hazardous items must be commercially packaged, while hazardous materials, as defined by FED-STD-313, require special packaging per TQ Requirement IP025. All packaging and labeling must conform to MIL-STD-129 with palletization following RP001: DLA Packaging Requirements for Procurement. Bare item marking is required per RQ017, though Unique Item Identification is not mandated. Sampling for inspection must follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract requires compliance with cybersecurity standards including NIST SP 800-171 Rev 1 and CMMC Level 2 self-assessment, along with federal regulations on hazardous materials labeling per 252.223-7001 and employment practices including equal opportunity, trafficking in persons, and eligibility verification. Offerors must hold a valid Unique Entity ID and CAGE code, and may represent as small business or other socioeconomic categories, with joint ventures requiring disclosure of all partner UEIs. Invoicing must be submitted via WAWF, and all proposals must be submitted electronically through DIBBS by the deadline of May 20, 2026. No pricing information is provided in Section B, and the contract type remains to be inserted by the contracting officer. Performance is subject to DLA’s comprehensive technical and quality requirements that supersede all commercial standards, and shipment must be made via traceable freight, explicitly prohibiting parcel post.
General Info
Agency
NAICS
Place of Performance
3301 F AVE DR 22 BLDG 506, TINKER AFB, OK, 73145-9031, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
SUPPORT,STRUCTURAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 82918 P/N 5-96297-38
SPE4A5-26-T-136P
SECTION B
PR: 7016620007 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016620007 0001 EA 1.000
NSN/MATERIAL:1560015465072
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB2039
FB2039 DD DEPOT OK CNTR RECVG
CP 405 855 7075
3301 F AVE DR 22 BLDG 506
TINKER AFB OK 73145-9031
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB2039
FB2039 DD DEPOT OK CNTR RECVG
CP 405 855 7075
3301 F AVE DR 22 BLDG 506
TINKER AFB OK 73145
US
M/F: (TCN) FB203961190950
SPE4A5-26-T-136P
SECTION B
PR: 7016620007 PRLI: 0001 CONT’D
RDD: 777
PROJ: AWP TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 0A ADV: 6N FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:05/04/2026
SPE4A5-26-T-136P NSN/Part Number: 1560-01-546-5072 Quantity: 1 EA Purchase Request: 7016620007QTY: 1 Delivery: 5 days ADO
More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS