SUPPORT, STRUCTURAL COM

SUPPORT,STRUCTURAL COMPONENT,AIRCRAFT
SUPPORT,STRUCTURAL
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil. RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
INCLUDE RQ032 OBJECT TEXT ID ST
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RT001: MEASURING AND TEST EQUIPMENT
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil. DIGITAL MYLAR DATA EXISTS FOR THIS NSN, AND WILL BE INCLUDED IN THE
SPE4A7-26-T-724L
SECTION B
TECHNICAL DATA PACKAGE PROVIDED BY DLA. IF UNABLE TO USE THE DATA IN
THE DIGITAL FORMAT PROVIDED, THE CONTRACTOR WILL BE RESPONSIBLE FOR
HAVING THE DATA CONVERTED TO THE NECESSARY FORMAT (I.E. MYLAR FILM),
THROUGH A THIRD PARTY AND BEAR THE ASSOCIATED COSTS WHEN CONVERTING FROM
DIGITAL TO STABLE BASED FORMAT, THE DIGITAL MYLAR SHALL BE PLOTTED ON
STABLE BASE MATERIAL, WHILE MAINTAINING THE DIMENSIONAL ACCURACY DEMANDS
OF THE UNDIMENSIONED DRAWING.
THIS INCLUDES BUT IS NOT LIMITED TO: VERIFY THE PLOT OF THE MYLAR(S) FOR
DIMENSIONAL ACCURACY AS OUTLINED IN ASME Y14.31. ACCURACY SHALL BE
DETERMINED VERTICALLY, HORIZONTALLY AND DIAGONALLY. ENSURE THAT THE
INDIVIDUAL GRID UNITS ARE WITHIN THE TOLERANCE OF (+,-) 0.005 INCHES AND
(+,-) 0.007 INCHES DIAGONALLY. TOTAL GRID TOLERANCE SHALL BE (+,-)
0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY. DRAWINGS WITH
DIMENSIONAL ACCURACY POINTS SUCH AS TRAMMEL POINTS SHALL BE MEASURED TO
WITHIN CENTERLINE (+,-) 0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY.
REGISTRATION MARKS SUCH AS THOSE USED ON CIRCUIT CARDS SHALL BE MEASURED
TO WITHIN (+,-) 0.005 INCHES AND (+,-) 0.007 INCHES DIAGONALLY.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC DRAWING NR 78286 70207-06051 REVISION NR P DTD 01/01/1939 PART PIECE NUMBER: 70207-06051-065
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 38010-70012 REVISION NR DTD 01/09/1978 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8423 REVISION NR 05 DTD 07/08/1996 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8446 REVISION NR DTD 04/02/1976 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8654 REVISION NR 12 DTD 03/07/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8693 REVISION NR 6 DTD 07/11/2011 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8693 REVISION NR 07 DTD 12/18/2012 PART PIECE NUMBER:
SPE4A7-26-T-724L
SECTION B
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 S6122-86255 REVISION NR E DTD 12/07/2021 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 S6122-86261 REVISION NR E DTD 12/07/2021 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8798 REVISION NR 17 DTD 04/28/2015 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8802 REVISION NR 6 DTD 07/08/1996 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8806 REVISION NR 13 DTD 06/17/2014 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8813 REVISION NR 4 DTD 03/26/2015 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 TI-STD15 REVISION NR E DTD 07/13/2016 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 S6122-86261 REVISION NR F DTD 09/06/1989 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 S6122-86261 REVISION NR G DTD 10/23/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8802 REVISION NR 6 DTD 03/05/2008 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8759 REVISION NR 2 DTD 06/15/1993 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8759 REVISION NR 2 DTD 12/05/1972 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8446 REVISION NR DTD 01/04/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 81996 CAST-STD-1 REVISION NR D DTD 10/14/2016 PART PIECE NUMBER:
SPE4A7-26-T-724L
SECTION B
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8630 REVISION NR 26 DTD 05/19/2015 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8630 REVISION NR 22 DTD 05/08/2009 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8654 REVISION NR 11 DTD 12/18/1998 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 38010-70012 REVISION NR A DTD PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 38010-70012 REVISION NR DTD 11/22/1983 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 70207-06053 REVISION NR B DTD 09/02/1987 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 38010-70012 REVISION NR D DTD 11/30/2014 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 S6122-86255 REVISION NR N DTD 07/13/1989 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 70207-06051 REVISION NR AE DTD 10/23/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 70207-06053 REVISION NR E DTD 04/24/2003 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8423 REVISION NR 5DTD 01/29/2007 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8043 REVISION NR 5 DTD 04/29/2009 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8407 REVISION NR 10 DTD 05/28/1998 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8407 REVISION NR 11 DTD 05/20/2010 PART PIECE NUMBER:
SPE4A7-26-T-724L
SECTION B
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS5100 REVISION NR 39 DTD 10/27/2011 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS9208 REVISION NR 55 DTD 04/14/2015 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 SS70207-06051 REVISION NR C DTD 07/29/2008 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 70207-06051 REVISION NR CE DTD 11/01/2016 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 70207-06051 REVISION NR N DTD 12/09/2021 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 70207-06051/2 REVISION NR K DTD 02/13/2001 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 70207-06051-065 REVISION NR DTD 09/13/2023 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 70207-06053 REVISION NR E DTD 01/04/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 70207-06053 REVISION NR C DTD 08/24/1983 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8423 REVISION NR 5DTD 01/09/2001 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8446 REVISION NR 0DTD 07/14/2011 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 S6122-86255 REVISION NR J DTD 10/23/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 78286 SS8446 REVISION NR 0DTD 06/07/2011 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE4A7-26-T-724L
SECTION B
PR: 7018248758 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018248758 0001 EA 3.000
NSN/MATERIAL:1560013322537
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A7-26-T-724L
SECTION B
PR: 7018248758 PRLI: 0001 CONT’D
Need Ship Date:03/08/2027 Original Required Delivery Date:05/07/2027
SPE4A7-26-T-724L NSN/Part Number: 1560-01-332-2537 Quantity: 3 EA Purchase Request: 7018248758QTY: 3 Delivery: 171 days ADO