Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SUPPORT, STRUCTURAL COM

Active
SPE4A1-26-T-2576Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of six structural component supports for aircraft, identified by NSN 1560-01-727-1846 and Lockheed Martin part number 3358938-1. The items are designated as critical application items and must be delivered to DLA Distribution San Joaquin in Tracy, California, by September 27, 2027. The delivery timeline is set at 402 days after order, with FOB origin for both inspection and acceptance. Compliance requirements include CMMC Level 2 self-assessment and adherence to Covered Defense Information standards. Quality control must follow MIL-STD-1916 or ASQ H1331 sampling plans, and packaging must comply with DLA requirements and MIL-STD-129. The contract specifies that there is no shelf life requirement and that item unique identification is not required by the service customer.

General Info

Procure six aircraft structural supports for delivery to Tracy, California by September 2027.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

PR: 7017868227 PRLI: 0001 CONT’D, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

(1)

SPE4A1-26-T-2576.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
Allison Hugel
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SUPPORT,STRUCTURAL COMPONENT,AIRCRAFT
SUPPORT,STRUCTURAL
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SPE4A1-26-T-2576
SECTION B
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RT001: MEASURING AND TEST EQUIPMENT
CRITICAL APPLICATION ITEM
LOCKHEED MARTIN CORP 98897 P/N 3358938-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017868227 0001 EA 6.000
NSN/MATERIAL:1560017271846
DELIVERY (IN DAYS):0402
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
SPE4A1-26-T-2576
SECTION B
PR: 7017868227 PRLI: 0001 CONT’D
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:09/27/2027 Original Required Delivery Date:09/27/2027
SPE4A1-26-T-2576 NSN/Part Number: 1560-01-727-1846 Quantity: 6 EA Purchase Request: 7017868227QTY: 6 Delivery: 402 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-646R
This contract is a solicitation for the procurement of three aircraft skin units under solicitation number SPE4A7-26-T-646R. The delivery requirement is set for 342 days after receipt of order. The procurement is managed by the Defense Logistics Agency and is subject to specific DLA packaging requirements, inspection and acceptance at origin, and strict physical identification and bare item marking standards. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. The contract involves significant security and regulatory constraints, including the requirement for CMMC Level 2 certification and adherence to ITAR and EAR export controls. Because the item involves a Northrop Grumman license agreement for T-38 and F-5 aircraft, vendors must comply with restricted technical data packages, non-disclosure agreements, and data destruction conditions. Access to export-controlled data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export training.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FITTING, STRUCTURAL
Solicitation # SPE4A5-26-T-348N
This contract is for the procurement of one structural fitting component for aircraft, identified by NSN 1560-01-505-4156 and Sikorsky part number 70219-02525-046. The item is designated as a critical application item and is manufactured via a forging process. Delivery is required within 170 days, with a need ship date of February 7, 2027, and an original required delivery date of September 24, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Compliance requirements include CMMC Level 2 self-assessment, adherence to DLA Master List technical and quality requirements, and specific packaging standards such as MIL-STD-129 and ASTM D3951. While item unique identification is not required, the contractor must follow physical identification and bare item marking standards. Sampling must be conducted according to the Sikorsky Corporation alternate sampling plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A7-26-T-647U
This solicitation, number SPE4A7-26-T-647U, is issued by the Department of Defense through the Defense Logistics Agency for the procurement of two aircraft skin units under NSN 1560-01-366-4266. The contract requires delivery within 170 days after receipt of order, with performance centered at Tinker AFB. The agreement is subject to stringent technical and quality requirements, including CMMC Level 2 certification and adherence to the DLA Master List. Key compliance mandates include strict export controls under ITAR and EAR regulations, requiring contractors to have approved JCP certification and completed specialized training. Additionally, the contract specifies requirements for source approval, configuration change management, and the use of Qualified Products or Manufacturers Lists for specific components.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A7-26-T-650D
This solicitation, issued by the Department of Defense under the ASC Supplier OE and AF Division, is for the procurement of 29 structural support components for aircraft, identified by NSN 1560-01-643-3025. The contract is a total small business set-aside under NAICS code 336413, with a delivery requirement of 249 days after the order is placed. Performance is centered at Tinker AFB, and the solicitation is managed by primary point of contact Amber Wells. The agreement is subject to rigorous technical and quality standards as defined in the DLA Master List, including specific requirements for source approval, cybersecurity maturity (CMMC Level 2), and configuration change management. Strict export controls apply under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed DOD export-controlled technical data training to access sensitive information. Additional mandates include specific DLA packaging standards, physical item marking, and inspection and acceptance at the point of origin.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
BRACKET ASSY, MATS, A
Solicitation # SPE4A7-26-T-649R
This contract is for the procurement of three units of Bracket Assy, Mats, A, identified by NSN 1680-01-550-9403. The item is classified as a critical application item with associated part numbers from The Boeing Company and Robertson Fuel Systems. Delivery is required within 321 days, with a specified need ship date of July 8, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific protocols for cybersecurity maturity model certification, configuration change management, and source approval requests. Quality assurance is governed by MIL-STD-1916 or ASQ sampling plans, with inspection and acceptance occurring at the origin. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements for procurement.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PISTON, HYDRAULIC AC
Solicitation # SPE4A7-26-T-612C
Solicitation SPE4A7-26-T-612C is issued by the Defense Logistics Agency Aviation for the procurement of two hydraulic AC pistons, identified by NSN 1650-01-517-7844. The requirement specifies adherence to technical drawings and part number 11463841. The total estimated contract value across various line items is 109,554 dollars. Delivery is required within 171 days after receipt of order, with a need ship date of January 31, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Quality and technical compliance are governed by ISO 9001:2015 standards, with inspection and acceptance occurring at the origin. Sampling must follow MIL-STD-1916 or ASQ H1331, utilizing specific AQL levels for critical, major, and minor attributes. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129 and RQ017 for bare item marking. The contract incorporates various FAR and DFARS clauses, including requirements for hazardous material identification per 29 CFR 1910.1200 and the use of the Wide Area WorkFlow system for invoicing. Proposals must be submitted via the DIBBS portal by August 12, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-648S
This solicitation, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, is for the procurement of nine port access canopy locks, identified by NSN 0001S00000052. The contract requires delivery within 536 days after the order is placed, with the place of performance located at Hill AFB. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific mandates for packaging, physical identification, and inspection at origin. Notably, the contract involves covered defense information and requires CMMC Level 2 certification. Due to the nature of the technical data, the project is subject to ITAR and EAR export controls, meaning access is limited to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
BELT, AIRCRAFT SAFETY
Solicitation # SPE4A7-26-T-646H
This solicitation, number SPE4A7-26-T-646H, is issued by the Department of Defense for the procurement of 83 aircraft safety belts (NSN 1680-01-225-7452) with a delivery requirement of 226 days after the order is placed. Offerors are encouraged to provide quantity ranges to accommodate potential changes in demand and must certify that they will not provide covered telecommunications equipment. The contract emphasizes strict adherence to domestic material restrictions, including the Buy American Act and the Berry Amendment, requiring disclosure for any non-domestic materials used. Prospective bidders must be aware that additive manufacturing is prohibited unless specifically authorized. Additionally, all contractors will soon be required to register via the Account Management and Provisioning System to access the Vendor Shipment Module for shipping to DLA. Small business joint ventures must provide specific representations regarding their status. Those unable to quote by the deadline are requested to submit a No Bid response with an anticipated quote date to keep the requirement active.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SERVOVALVE, HYDRAULIC
Solicitation # SPE4A6-26-T-16EL
This contract is for the procurement of one hydraulic servovalve, identified as a commercial off the shelf item with part number 31-352A from Moog Inc and NSN 4820012958298. Offerors who are not already cited as acceptable sources must obtain source approval from the design control activity by submitting technical data packages to the DSCR with their offer. The requirement is managed by the ASC Commodities Division of the Department of Defense under solicitation SPE4A6-26-T-16EL. The delivery is set for 321 days after the order, with a required delivery date of July 8, 2027. Shipping is FOB Origin and destined for the DLA Distribution New Cumberland facility in Pennsylvania. Compliance requirements include CMMC Level 2 self-assessment, covered defense information protocols, and specific DLA packaging and marking standards according to MIL-STD-129 and MIL-STD-2073-1E. Inspection and acceptance will take place at the destination.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SWITCH, AIRCRAFT, MAT
Solicitation # SPE4A7-26-T-646M
This contract is for the procurement of 24 aircraft switches, identified as commercial off the shelf critical application items with part number T7-221H2F from Otto Engineering Inc. The order is managed under solicitation SPE4A7-26-T-646M and national stock number 1680-01-524-1656. Delivery is required within 170 days, with a need ship date of February 7, 2027, and a final required delivery date of November 4, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, including specific standards for source approval, higher level quality requirements, and measuring and test equipment. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA procurement requirements. Inspection and acceptance will take place at the destination.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
POCKET, CUTTER AND L
Solicitation # SPE4A7-26-T-645S
This solicitation is for the procurement of 1,441 units of item 1670 / 7791253, designated as a total small business set-aside. A critical requirement of this contract is the delivery of one first article unit to the Materials and Textiles Lab at Wright Patterson AFB within 120 calendar days of the contract date for government testing. The government will notify the contractor of approval or disapproval within 120 days of receipt, and this first article is separate from the final production quantity. Offerors must comply with domestic material restrictions, including the Berry Amendment and the Buy American Act, and represent that they will not provide covered telecommunications equipment. Additionally, contractors are required to register via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized, and offerors are encouraged to provide quantity ranges in their quotes to accommodate potential demand volatility.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
EDGEROLL, STRIP
Solicitation # SPE1C1-26-T-1623
This contract, identified by solicitation number SPE1C1-26-T-1623, is for the procurement of 20 units of gray edgeroll strips in large and x-large sizes. The items are identified by NSN 8475015412297 and Gentex Corporation part number 05C12022-2. The delivery is required within 20 days, with an original required delivery date of July 16, 2026. The agreement specifies that delivery, inspection, and acceptance will occur at the point of origin. Packaging and marking must strictly adhere to MIL-STD-129, MIL-STD-147, and DLA packaging requirements. The shipment is coordinated through freight forwarder DF Young Inc for final delivery to a destination in Poprad, Slovakia. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for the removal of government identification from non-accepted supplies.
C AND T SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

NAICS: 333611
New
DIBBS
SCREW, ADJUSTING
Solicitation # SPE4A1-26-T-2567
This contract is for the procurement of 25 adjusting screws, identified by NSN 2835007524970 and Honeywell part number 96154-1. The order requires adherence to specific technical and quality standards, including DLA master list requirements for source approval, packaging, and measuring equipment. Notably, the manufacturing process may involve casting or forging, and contractors are advised to seek assistance if special tooling is required. Delivery is set for 170 days after order, with a required delivery date of May 3, 2027, shipping FOB Origin to the DLA Distribution Depot at Hill AFB. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001 requirements.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 313110
New
DIBBS
TAPE, LACING AND TYI
Solicitation # SPE4A1-26-T-2571
This contract is for the procurement of one unit of Tape, Lacing and Tying, identified by NSN 4020-01-661-8384 and RTX Corporation part number 1B1773. The requirement is managed by the Department of Defense Aviation Supply Chain under solicitation SPE4A1-26-T-2571. Delivery is required within 20 days, with a required delivery date of February 10, 2026, and shipping must be handled via traceable means to the receiving office at Joint Base McGuire-Dix-Lakehurst. The procurement is subject to stringent quality and technical standards, including Item Unique Identification per MIL-STD-130 and FAA airworthiness approval. Contractors must maintain supply chain traceability documentation and adhere to specific DLA packaging and marking requirements. Inspection and acceptance will occur at the destination, with sampling conducted according to MIL-STD-1916 or ASQ H1331.
Fiber, Yarn, and Thread Mills

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
CLAMP, SYNCHRO
Solicitation # SPE4A1-26-T-2563
This contract is for the procurement of two Synchro Clamps, identified by NSN 5342016702496 and Sikorsky Aircraft Corporation part number 06375-04801-117. The items are designated as critical application items and must adhere to strict quality and technical standards, including ISO 9001:2015 for manufacturers and specific DLA master list requirements. Sampling must follow the Sikorsky Corporation alternate plan QAP 1201 or meet ASQ H1331 or MIL-STD-1916 standards. Delivery is required within 84 days, with a final required delivery date of August 7, 2026, shipped FOB Origin to DLA Distribution Cherry Point in North Carolina. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA requirement RP001. The contract specifies that there is no shelf life requirement for this material and that item unique identification is not required by the service customer.
Other Support Activities for Air Transportation

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, TEE HEAD
Solicitation # SPE4A1-26-T-2574
This contract is for the procurement of 684 tee head bolts, identified by NSN 5306011813485 and part number 96AV450. The items must be manufactured according to reference drawing 10001 3281203 Revision A. Delivery is required within 195 days, with a need ship date of March 4, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and requires compliance with CMMC Level 2 self-assessment and covered defense information protocols. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract also incorporates technical and quality requirements from the DLA Master List.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A1-26-T-2575
This solicitation from the Department of Defense Aviation Supply Chain is for the procurement of 34 machine bolts under part number 5306-01-492-6783. The contract requires delivery within 243 days after the order is placed and specifies a performance location in Bremerton, Washington. The acquisition is governed by NAICS code 332112 and is managed by the Defense Logistics Agency. The contract is subject to stringent technical and quality requirements, including specific DLA packaging standards, physical identification of bare items, and inspection and acceptance at the origin. Notably, the item contains technical data subject to ITAR or EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.
Nonferrous Forging

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
ACTUATOR, ELECTRO-ME
Solicitation # SPE4A1-26-T-2564
This contract is for the procurement of 12 electro-mechanical actuators, identified by NSN 1680-00-516-7368 and Honeywell part number 31970-6. The order is designated as a critical application item with a delivery timeframe of 170 days, and the final destination for shipment is the DLA Distribution Depot at Tinker AFB, Oklahoma. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment, Item Unique Identification (IUID) per MIL-STD-130, and specific DLA packaging and marking requirements. Quality assurance will be managed through destination inspection and acceptance, utilizing sampling methods consistent with MIL-STD-1916 or ASQ H1331.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE4A1-26-T-2565
This contract is a solicitation for the procurement of five helical compression springs, identified by NSN 5360-01-078-8272, for the Department of Defense Aviation Supply Chain. The delivery requirement is set for 170 days after the order is placed. The procurement is governed by specific DLA packaging and documentation requirements, including source approval requests and strict guidelines regarding the removal of government identification from non-accepted supplies and physical item marking. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The solicitation is managed by the Aviation Supply Chain office with performance located in Greensboro, North Carolina.
Spring Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336360
New
DIBBS
GUARD, BRUSH, VEHICUL
Solicitation # SPE4A1-26-T-2569
This solicitation, issued by the Department of Defense Aviation Supply Chain, is for the procurement of two vehicle brush guards under part number 2540-01-735-0143. The contract requires delivery within 159 days after order and specifies that inspection and acceptance will occur at the origin. Compliance with DLA packaging requirements, physical item marking, and specific sampling methods such as MIL-STD-1916 or ASQ H1331 is mandatory to ensure quality standards are met. The agreement includes strict security and regulatory mandates, including CMMC Level 2 cybersecurity assessments and the protection of covered defense information. Technical data associated with this item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training. Item Unique Identification is not required for this specific order.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332996
New
DIBBS
REDUCER, TUBE
Solicitation # SPE4A1-26-T-2568
This contract is for the procurement of 10 tube reducers, identified by NSN 4730-00-697-0867 and Honeywell part number 82478. The order is managed under solicitation SPE4A1-26-T-2568 for the Aviation Supply Chain within the Department of Defense. Delivery is required within 170 days, with a need date of February 7, 2027, and an original required delivery date of May 14, 2027. Shipping is FOB Origin and destined for the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA Master List technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance is governed by sampling plans such as MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied unless otherwise specified. Inspection and acceptance will take place at the destination.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, CLOSE TOLERANCE
Solicitation # SPE4A1-26-T-2573
This contract is for the procurement of 91 units of close tolerance bolts, identified by NSN 5306011131284. The items are designated as critical application items and must adhere to specific technical data packages and non-government standards. Delivery is required within 137 days, with a need ship date of January 5, 2027, shipping FOB origin to the DLA Distribution New Cumberland facility in Pennsylvania. Quality assurance is stringent, requiring inspection and acceptance at the origin. Sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Packaging must follow ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements. Item Unique Identification is not required for this order.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A1-26-T-2572
This solicitation, issued by the Department of Defense Aviation Supply Chain under number SPE4A1-26-T-2572, is for the procurement of 16 machine bolts with NSN 5306-00-423-4981. The contract specifies that the items are associated with Caterpillar Tractor Co. of Peoria, Illinois, and requires adherence to DLA packaging requirements and technical quality standards as outlined in the DLA Master List. The delivery timeline is set for 297 days after order, with the place of performance located in Tracy, California. Interested parties must respond by August 20, 2026. The procurement falls under NAICS code 332721 and is managed by primary point of contact Jade Stringfield.
Precision Turned Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
COVER ASSY, VALVE
Solicitation # SPE4A1-26-T-2566
This contract, identified as solicitation SPE4A1-26-T-2566, is for the procurement of eight units of a Valve Cover Assembly, part number 136374 by Honeywell International, Inc. The item is classified as a critical application item under NSN 1660-00-943-5069. Delivery is required within 170 days after the order, with a need ship date of February 7, 2027, and a final required delivery date of September 2, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, and requires labeling in accordance with MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Additionally, the contractor must comply with CMMC Level 2 self-assessment for cybersecurity and follow all technical and quality requirements listed in the DLA Master List. Inspection and acceptance will occur at the destination.
Aircraft Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details