This Solicitation opportunity from Department Of Defense was posted on May 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
SUPPORT, STRUCTURAL
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This contract, issued as a Request for Quotations by the Department of Defense’s DLA Aviation under solicitation number SPE4A5-26-T-192S, is a small business set-aside for the procurement of structural support components identified by NSN 1560016113884, with a quantity of four units to be delivered FOB origin within 20 days after receipt of order. The item, designated as Boeing Part Number 63-1997-2, is classified as a critical application and subject to stringent compliance with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. All technical and quality requirements referenced by R or I numbers from the DLA Master List are binding, including Source Approval Request documentation, Covered Defense Information protocols, and CMMC Level 2 Self-Assessment requirements. The contractor must adhere to non-tailored ISO 9001:2015 quality management systems and implement sampling methods consistent with MIL-STD-1916, ASQ H1331, or approved zero-based plans, with critical, major, and minor attributes requiring verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major and acceptance requires zero non-conformances in sampled lots. Packaging and marking must strictly follow MIL-STD-129 and DLA Packaging Requirements for Procurement, with hazardous materials packaged according to TQ Requirement IP025 per FED-STD-313 and non-hazardous items compliant with ASTM D3951, though DLA requirements take precedence. The unit of issue is each (EA) with one unit per pack, and palletization must conform to RP001. Deliveries are to be shipped to Fort Hood, Texas, via the fastest traceable method excluding parcel post, with inspection and acceptance occurring at the destination point by the government. The contract is a fixed-price arrangement under deviation 2026-00038, incorporating numerous FAR clauses including changes, type of contract, small business representations, affirmative action, combating trafficking, sustainable products, and hazardous material identification. Contractors must be registered in SAM, use WAWF for invoicing and receiving reports, and maintain current representations in SAM throughout performance. Cybersecurity obligations include compliance with basic
General Info
Agency
NAICS
Place of Performance
BLDG 11057 MURPHY RD AND 27TH ST, FORT HOOD, TX, 76544-0000, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
SUPPORT,STRUCTURAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
EXCEPTIONS DO NOT DRILL FASTENER OR PILOT HOLES EXCEPT THOSE REQUIRED TO
ASSEMBLE 63-1997-2
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 81205 P/N 63-1997-2
SPE4A5-26-T-192S
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016833294 0001 EA 4.000
NSN/MATERIAL:1560016113884
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W45RNQ
0003 CS BN CO A DISTRIBUTI
AWCF SSF
BLDG 11057 MURPHY RD AND 27TH ST
FORT HOOD TX 76544-0000
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W45RNQ
0003 CS BN CO A DISTRIBUTI
AWCF SSF
BLDG 11057 MURPHY RD AND 27TH ST
FORT HOOD TX 76544-0000
US
SPE4A5-26-T-192S
SECTION B
PR: 7016833294 PRLI: 0001 CONT’D
MARKFOR
W45RNQ
0003 CS BN CO A DISTRIBUTI
AWCF SSF
BLDG 11057 MURPHY RD AND 27TH ST
FORT HOOD TX 76544-0000
US
M/F: (TCN) W45RNQ61290314
RDD: 777
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:05/15/2026
SPE4A5-26-T-192S NSN/Part Number: 1560-01-611-3884 Quantity: 4 EA Purchase Request: 7016833294QTY: 4 Delivery: 20 days ADO
More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS