SUPPRESSOR, CATION

SUPPRESSOR,CATION
SUPPRESSOR,CATION
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THERMO FISHER SCIENTIFIC (ASHEVILLE) 55957 P/N 088670
THERMO FISHER SCIENTIFIC (ASHEVILLE) 55957 P/N 088670CMD
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M1-26-T-386R
SECTION B
PR: 7018379206 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018379206 0001 EA 6.000
NSN/MATERIAL:6110016761212
DELIVERY (IN DAYS):0211
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
PACKAGING AND PACKING SHALL BE COMMERCIAL, AS SPECIFIED HEREIN.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER. WHEN REQUIRED, UNIT CONTAINER SHALL CONTAIN INTERNAL FITTINGS, WRAPPING, CUSHIONING, ETC., CAPABLE OF PROTECTING THE CONTENTS
SPE7M1-26-T-386R
SECTION B
PR: 7018379206 PRLI: 0001 CONT’D
FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
PALLETIZATION SHALL BE IN ACCORDANCE WITH
MIL-STD-147. UNITIZED LOADS SHALL BE USED
WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE
DESTINATION EXCEEDS 250 LBS (EXCLUDING THE
PALLET) OR 20 CU FT. LOADS SHALL BE
UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY
PALLETS. PALLET SHALL HAVE A LENGTH OF 40
INCHES AND A WIDTH OF 48 INCHES. PALLET
LOAD, INCLUDING THE PALLET, SHALL NOT EXCEED
54 INCHES IN HEIGHT, 43 INCHES IN LENGTH AND
52 INCHES IN WIDTH.
QUANTITY FOR SHIPMENT TO ONE DESTINATION OF
LESS THAN 250 LBS OR 20 CUBIC FEET NEED NOT
BE PALLETIZED.
IF A PROPERLY PALLETIZED LOAD OF A SINGLE
ITEM (EQUIPMENT ITEM AND PALLET) EXCEEDS 54
INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT
BE ADHERED TO.
IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET
LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE
ADHERED TO. CONTACT THE CONTRACTING OFFICER
FOR ADDITIONAL GUIDANCE.
AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY
BE SUPPLIED.
IN ADDITION TO ALL MARKING REQUIREMENTS
SPECIFIED HEREIN AND IN THE APPLICABLE
SPECIFICATION DOCUMENT, ALL SHIPMENTS TO DLA
DISTRIBUTION LOCATIONS SHALL ALSO REQUIRE
PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS
CLAUSE 252.211-7006.
HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE
TO NSNS IN FSCS 6505/6508/6509/6550.
LABELING AND MARKING. MATERIAL SHALL BE
LABELED AND MARKED IN ACCORDANCE WITH
COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.
MARKING ON EACH UNIT SHALL INCLUDE THE NSN
AND GOVERNMENT QUANTITY AND UNIT OF ISSUE.
HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE
TO NSNS IN FSCs 6505 and 6509.
MARKING ON EACH SHIPPING CONTAINER AND/OR UNITIZED LOAD SHALL BE AS SPECIFIED IN MEDICAL MARKING STANDARD NO. 1 ((MMS NO. 1).
ADDITIONAL MARKINGS SHALL BE SUPPLIED IN ACCORDANCE WITH ALL APPLICABLE REGULATORY REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL HANDLING, I.E., CONTROLLED, PERISHABLE AND HAZARDOUS ITEMS.
APPLICABLE TO ALL SHIPMENTS, EXCEPT SHIPMENTS TO DLA DISTRIBUTION LOCATIONS:
SPE7M1-26-T-386R
SECTION B
PR: 7018379206 PRLI: 0001 CONT’D
AS AN ALTERNATE, FOR SHIPMENTS DIRECTLY TO
MEDICAL FACILITIES OF ALL ITEMS EXCEPT
PERISHABLE ITEMS AND HAZARDOUS MATERIAL,
REQUIRED MARKINGS MAY BE SUPPLIED ON THE
DD FORM 250 OR PACKING LIST ACCOMPANYING THE
SHIPMENT.
MIL-STD-147 IS AVAILABLE ONLINE AT
HTTP://QUICKSEARCH.DLA.MIL/
MMS NO. 1 MAY BE OBTAINED BY CONTACTING
DLA TROOP SUPPORT, ATTN: MEDICAL SUPPLIER
OPERATIONS, FSSB (PACKAGING), VIA EMAIL:
DSCP.PACKAGING@DLA.MIL. MMS NO. 1 IS ALSO
AVAILABLE ONLINE AT
http://www.dla.mil/LandandMaritime/Offers/Services/ http://www.dla.mil/LandandMaritime/Offers/Services/ TechnicalSupport/Logistics/Packaging/MedicalPack1.aspx
CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT TREATMENT OF WPM SHALL BE THE ONLY METHODS AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS. ADDITIONAL INFORMATION REGARDING DOD'S WPM REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING WEBSITE: HTTP://WWW.LANDANDMARITIME.DLA.MIL/ OFFICES/PACKAGING/PALLETIZATIONWPMNOTICE.ASP.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/08/2027 Original Required Delivery Date:05/08/2027
SPE7M1-26-T-386R NSN/Part Number: 6110-01-676-1212 Quantity: 6 EA Purchase Request: 7018379206QTY: 6 Delivery: 211 days ADO