Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Surge-Capable Manufacturing and Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the Defense Logistics Agency under the Department of Defense, focuses on surge-capable manufacturing and supply for defense-critical items. The primary objective is to establish surge production capacity through the Surge eCAP plan, ensuring that essential materials can be rapidly fulfilled during national emergencies. The agreement allows for the expedited production of critical items under specific emergency conditions, with a designated 10 percent premium applied to these surge requirements. The contract falls under NAICS code 332913 and is designed to maintain national security readiness by securing flexible manufacturing capabilities.

General Info

DLA subcontract for surge-capable manufacturing of defense-critical items during national emergencies.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332913 - Plumbing Fixture Fitting and Trim Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7LX26FB0BN.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEPARATOR, WATER, LIQ

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 17

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide surge production capacity for defense-critical items under the Surge eCAP plan, enabling rapid fulfillment during national emergencies with 10% premium.

Similar Contracts

Same NAICS industry code

Supply of Fluid Filter Elements (NSN 4330-00-287-8745)This subcontract, issued by the Department of Defense for the DLA Weapons Support Maritime Supply Chain, requires the manufacture or procurement of 53 fluid filter elements meeting NSN 4330-00-287-8745 specifications. The contractor must ensure all materials comply with the provided technical data sheet and Preservation Method 20, with delivery terms set as FOB Origin. Strict adherence to military standards is required, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332913, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Specialized Hose and Plumbing Component Supply

DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

GARBAGE DISPOSAL MACHI

Solicitation # SPE8E8-27-T-0225

Solicitation SPE8E8-27-T-0225 is a fixed-price request for quotations issued by DLA Troop Support, Construction and Equipment for the procurement of two commercial garbage disposal machines, identified by NSN 4540-01-685-9857 and part number FD4/125-E-6(480/60/3). The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery date is June 17, 2027, with a need ship date of April 12, 2027, and a delivery window of 167 days. Shipping terms are FOB Origin, while inspection and acceptance will occur at the destination. The procurement is governed by NAICS code 332913 and incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. Compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking is required. Key regulatory requirements include the Buy American and Balance of Payments Program, safeguarding of covered defense information under DFARS 252.204-7012, and the use of the Wide Area WorkFlow system for electronic invoicing and payment. Quotes must be submitted via the DLA Internet Bid Board System, and the award may be processed through an automated system, with a price evaluation preference available for HUBZone concerns.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

ADA Shower Material SupplierThis subcontract agreement establishes a partnership with a supplier to provide ADA-compliant fixtures and wall systems for prime contractors working on Choctaw Nation Housing Authority projects. The scope of work includes the delivery of specific materials to a site in Hugo, Oklahoma, including Swan-Stone wall surrounds with a minimum thickness of 1/4 inch, low-entry shower bases, Delta mixing valves, ADA grab bars, portable seats, and handheld faucets equipped with guide rods. All provided materials must strictly adhere to the 2019 International Residential Code and ADA accessibility guidelines to ensure full compliance. Interested parties should note that the response deadline for this opportunity is November 6, 2026.

Choctaw Nation Housing Authority

POSTED

DEADLINE

Select Soils (Borrow) SupplierThis subcontract agreement establishes a partnership with a supplier to provide certified select soils to be used as borrow material for prime contractors working on St. Tammany Parish Government infrastructure projects. The selected supplier is responsible for the procurement, hauling, and delivery of 10 cubic yards of select soils to a designated project site located in Slidell, Louisiana. To ensure project quality and structural integrity, all provided materials must strictly adhere to the technical specifications for select soils as defined by the Parish. This procurement is managed under the jurisdiction of the Louisiana state government for the benefit of St. Tammany Parish infrastructure improvements.

St. Tammany Parish Government

POSTED

DEADLINE

Solicitation # SPE7MC-27-T-1147

This solicitation, SPE7MC-27-T-1147, is a request for quotations for 53 units of a brass drain cock (NSN 4820-01-163-7156) intended for use in full track combat tanks. The component must feature MS33656-G4 ports, a special handle, and a maximum pressure rating of 250 PSI, with a dynamic temperature range from minus 20 to plus 400 degrees Fahrenheit. It requires Viton O-rings and must be compatible with fluids per MIL-L-2104, MIL-L-21260, MIL-L-46167, and VV-F-800. This is identified as a critical application item requiring Class 3 threads and compliance with QPL/QML requirements. Manufacturing may require specific casting or forging tooling, and the contractor must adhere to technical data package Revision A. The contract is a fixed-price acquisition with delivery and inspection points set at the origin, with a required delivery date of July 11, 2027. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Quality systems must meet SAE AS9003 or ISO 9001 standards. This is not a small business set-aside, though HUBZone price evaluation preferences apply. Key regulatory requirements include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted via the DLA Internet Bid Board System, and invoicing is required through the Wide Area WorkFlow system.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

TOILET, AIRCRAFT

Solicitation # SPE8E8-27-T-0141

Solicitation SPE8E8-27-T-0141 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 14 aircraft toilets, identified by NSN 4510-01-167-1057, for use on Stratolifter C/CK-135 aircraft. This is a total small business set-aside under NAICS 332913. The required delivery date is September 3, 2027, with a need ship date of July 4, 2027. While the contract is FOB Destination, offerors are instructed to submit quotes based on FOB Origin. Inspection and acceptance will occur at the destination, specifically DLA Distribution Depot Oklahoma at Tinker AFB. The procurement mandates strict adherence to DLA Master List technical and quality requirements, which take precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129, and palletization must comply with RP001. Offerors must provide a complete data package for both approved and alternate parts for technical evaluation, and the use of additive manufacturing is prohibited unless specifically authorized. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards is required. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

POSTED

DEADLINE

in about 3 hours

STOPPER, WASTE DRAIN

Solicitation # SPE7M1-27-T-0699

Solicitation SPE7M1-27-T-0699 is a Request for Quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 11 waste drain stoppers. This item is designated as a critical application item, identified by NSN 4510014605564 and part number 4259-20 from Safran Electronics and Defense. The procurement falls under NAICS code 332913, and quotes must be submitted via the DLA Internet Bid Board System by October 23, 2026. The contract specifies delivery FOB Origin with a required delivery date of February 19, 2027, and a need ship date of April 6, 2027. Supplies are to be delivered to the DLA Distribution Depot Oklahoma at Tinker AFB. Inspection and acceptance will occur at the destination. Packaging must comply with ASTM D3951 and RP001, with marking and labeling adhering to MIL-STD-129. Payment will be processed electronically through the Wide Area Workflow system. The agreement incorporates various FAR and DFARS clauses, including requirements for the Buy American Act, Berry Amendment compliance, and NIST SP 800-171 cybersecurity assessments.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

in about 3 hours

Plumbing Supplies and Fixtures VendorThis subcontract opportunity with MoDOT Transportation involves the supply and delivery of commercial grade plumbing fixtures and piping, including PVC, copper, and cast iron. The vendor will provide pipes, valves, and other plumbing components to prime contractors working on MoDOT and MHTC facility projects, with deliveries made directly to project sites or contractor shops. All provided materials must strictly comply with the Domestic Products Procurement Act. Interested parties should note that the response deadline for this solicitation is November 12, 2026.

MODOT TRANSPORTATION

POSTED

DEADLINE

Solicitation # SPE7MC-27-T-1029

Solicitation SPE7MC-27-T-1029 is a fixed-price procurement for 206 units of a drain cock, identified as a critical application item under NSN 4820012999372. The requirement specifies compatible part numbers from Oshkosh Defense LLC (2GH631) and Rolls-Royce Solutions America Inc (8925710). Delivery is required within 168 days, with an original required delivery date of March 6, 2027, and a need ship date of April 20, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, where both inspection and acceptance will occur. The contract mandates strict adherence to technical and quality standards via RA001 and DLA's master list. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001, while hazardous material labeling must follow the Hazard Communication Standard. Special restrictions include compliance with NAVSEA 5100-003D regarding mercury containment and the Buy American and Balance of Payments Program under DFARS 252.225-7001. Administrative requirements include registration in the System for Award Management and the use of Wide Area WorkFlow for electronic invoicing and receiving reports.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Transportable Temporary Housing Unit (TTHU) Retro Fit Shower and Accessories Installation Kits

Solicitation # 70FB827Q00000003

Solicitation 70FB8027Q00000003 is a full and open competition issued by the Department of Homeland Security's Federal Emergency Management Agency (FEMA) to establish a multiple award Blanket Purchase Agreement (BPA). The objective is to procure new and unused commercial household retro fit shower and accessories installation kits for Transportable Temporary Housing Units (TTHUs) to support displaced individuals with disabilities. The requirement falls under NAICS code 332913 for Plumbing Fixture Fitting and Trim Manufacturing. All products must adhere to strict accessibility and safety standards, including the Americans with Disabilities Act (ADA), Uniform Federal Accessibility Standards (UFAS), American National Standard A117.1, and the Consumer Product Safety Act. The contractor is responsible for the selection, packaging, and delivery of kits tailored to specific Mobile Home Unit configurations, with a requirement that each kit be consolidated into a single container and labeled with a detailed packaging slip. Inspection will occur at the delivery location, with final acceptance handled by the Contracting Officer's Representative (COR). Interested offerors must submit technical quotes, including a compliance matrix and past performance evaluations, to Contracting Officer Keturah Stroy by November 13, 2026. Invoicing is to be handled electronically via PDF through the FEMA Finance Center.

Community Survivor Assistance SEC

POSTED

DEADLINE

Plumbing Parts SupplierThis subcontract agreement establishes a partnership for the supply and delivery of essential plumbing parts and components to support prime contractors working on Texas Department of Criminal Justice facility projects. Specifically, the scope of work focuses on the Ellis Unit in Huntsville, Texas, where the supplier is responsible for sourcing and delivering valves, pipes, fittings, and fixtures as outlined in the procurement parts list. The contract is categorized under NAICS code 332913 and is associated with the Texas Department of Criminal Justice. Interested parties should note that the solicitation was posted on October 21, 2026, with a response deadline set for November 5, 2026. The primary objective is to ensure the timely physical delivery of all specified plumbing materials to the designated state facility.

Texas Department of Criminal Justice

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690016685478)

All Other Miscellaneous Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 21 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 21 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 21 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of Liquid Water Separator Units

Defense Logistics Agency

POSTED

DEADLINE

BREAKER, VACUUM, FLUS

Solicitation # SPE8E826F0708

Defense Logistics Agency

POSTED

DEADLINE

SEPARATOR, WATER, LIQ

Solicitation # SPE7LX26FB0BN

Defense Logistics Agency

POSTED

DEADLINE

Anti-Surge Valve Supply and Certification

Aviation Logistics Center (ALC)(00038)

POSTED

CLOSED

4510 COVER FAUCET HOLE

Solicitation # N0040626Q0287

Navsup Flt Logistics Ctr Puget Sound

POSTED

CLOSED

45--VALVE,FLUSH

Solicitation # SPE8E8-26-T-5022

POSTED

DEADLINE

45--URINAL,STATIONARY

Solicitation # SPE8E8-26-T-4958

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Manufacture of Metal Tube Assembly

FLUID HANDLING DIVISION

POSTED

CLOSED

Precision Valve Manufacturing & Supply

ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

Metal Tube Assembly Manufacturing

FLUID HANDLING DIVISION

POSTED

CLOSED

Gate Valve Supply and Delivery

ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

Precision Valve Manufacturing and Assembly

ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS