Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Surveying and Site Layout Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract establishes a subcontract for topographic surveying, boundary determination, and construction layout services to support infrastructure and building projects under the Department of Defense. The work falls under NAICS code 541370, indicating specialized surveying and mapping services, and is managed by the Defense Logistics Agency. The contract was posted on July 21, 2026, and is tied to the primary contract with identification numbers SPE60525D4502 and SPE60526FHSR1, with a contract count of 719. Place of performance and organizational details are unspecified, but the services are expected to be performed as needed at various DoD sites. The subcontractor is responsible for accurate site data collection and precise layout execution to ensure compliance with engineering and construction requirements.

General Info

Subcontract for topographic surveying and construction layout under DoD, managed by DLA, tied to SPE60525D4502 and SPE60526FHSR1.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541370 - Surveying and Mapping (except Geophysical) ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 21

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Topographic surveying, boundary determination, and construction layout for infrastructure or building sites.

Similar Contracts

Same NAICS industry code

Survey and Mapping Services IDIQThe Port of Seattle seeks qualified firms or teams to provide Survey and Mapping Services under an Indefinite Delivery/Indefinite Quantity (IDIQ) contract, with the solicitation posted on July 22, 2026. All survey work must adhere to specific geodetic standards: at airport facilities, surveys must follow the Seattle-Tacoma International Airport Grid System or NAD83, while seaport surveys must use NAD83 or the Seattle Tidelands datum. Vertical control must conform to NGVD 29, STIA Vertical Datum, MLLW, or NAVD88, with any deviations requiring written approval from the Port Manager of Survey and Mapping. All land surveying activities must comply with current Washington Administrative Code and Revised Code of Washington regulations. Work is performed under the direct supervision of the Port Manager of Survey and Mapping Services or their designate, encompassing both field and office tasks to support on-site surveying and mapping needs. The contract is managed by the Port of Seattle’s Construction Management division, with primary point of contact Hala Rabbo and project manager Ann Davidson available for inquiries.

Construction Management

POSTED

about 10 hours ago

DEADLINE

Helicopter Mule Deer SurveysThe Texas Parks and Wildlife Department is seeking qualified contractors to provide helicopter-based mule deer surveys across the state of Texas under a blanket contract arrangement. The primary objective is to conduct aerial surveys targeting mule deer populations, with operations centered around designated on-site base camps located throughout Texas. Work will commence with an initial survey project, followed by ongoing, as-needed services over the life of the contract, allowing flexibility to respond to seasonal, ecological, or management-driven requirements without the need for new procurement actions. All work must adhere strictly to the scope of work and contract terms established by TPWD, ensuring standardized data collection and operational protocols statewide. Bids must be submitted by August 6, 2026, and the solicitation is open under number 802-27-77098, with the posting date of July 22, 2026. The contract is managed by the Texas Parks and Wildlife Department, a state-level law enforcement and natural resources agency, and performance will occur at various locations across the state of Texas. For inquiries and official communications, Vanessa Contreras serves as the primary point of contact via phone at 512-389-4752 or email at Vanessa.Contreras@tpwd.texas.gov. The opportunity is not subject to a specific set-aside classification, and contractors are expected to possess the aircraft, crew, technical expertise, and logistical capability to operate safely and effectively in remote and diverse Texas terrains. More details are available through the provided Texas SmartBuy portal link.

Parks and Wildlife Department

POSTED

about 12 hours ago

DEADLINE

Data Collection and Field SurveyingThe contract titled Data Collection and Field Surveying is a small business set-aside subcontract under NAICS code 541370, reserved exclusively for small businesses as defined by the SBA. It requires on-site execution of comprehensive field activities including topographic surveys, environmental sampling, and detailed documentation of site conditions. The solicitation was posted on July 22, 2026, with a firm deadline for responses on August 5, 2026, at 4:00 PM. The work is managed by the FWS Sat Team 3 under the Department of the Interior, though specific performance location details such as city, state, or zip code are not provided. All tasks must be completed in the field and are essential to supporting environmental and geographic data collection efforts for federal projects. Interested parties must ensure full compliance with small business eligibility requirements and submit proposals before the specified deadline.

POSTED

about 15 hours ago

DEADLINE

Testing, Inspection, and Commissioning ServicesPhiladelphia Gas Works is seeking a subcontractor to provide comprehensive testing, inspection, and commissioning services for piping systems, including pressure testing, leak detection, instrument calibration, and functional performance verification. The work requires rigorous adherence to industry standards and the submission of detailed test reports and compliance documentation to ensure all systems operate safely and as designed. The solicitation is open for responses until August 14, 2026, and is classified under NAICS code 541370 for engineering services. All activities must be performed in accordance with the technical and regulatory expectations set by Pennsylvania jurisdictional requirements, with performance expectations tied to the utility’s operational and safety protocols. Interested parties must access the full solicitation through the provided online portal to review scope requirements and submission guidelines.

Philadelphia Gas Works

POSTED

about 15 hours ago

DEADLINE

Site Survey & Condition AssessmentThe contract titled Site Survey & Condition Assessment is a total small business set-aside under the NAICS code 541370, issued by the National Interagency Fire Center under the Department of the Interior. It requires field surveys to evaluate the current state of existing fences, precisely identify locations needing repair, and confirm that fence alignments match official drawings using GPS and GIS technologies. The work is intended to support accurate documentation and maintenance planning for infrastructure related to federal land management, with all tasks performed in the field using geospatial tools to ensure precision and compliance with established design standards. Responses to this subcontract solicitation are due by August 5, 2026, and the opportunity is exclusively available to small businesses certified under the SBA’s total small business set-aside program. The place of performance is not explicitly defined in the provided data, implying that work may occur across multiple locations under the agency’s jurisdiction, likely in areas managed by the Department of the Interior. The posting date of July 22, 2026, provides potential respondents approximately three weeks to prepare and submit their proposals, with no designated point of contact listed, suggesting that all inquiries must be directed through the official SAM.gov platform linked in the solicitation.

National Interagency Fire Center

POSTED

about 15 hours ago

DEADLINE

B--BLM ID AML DIGITAL INVENTORY - CancelledThe contract, titled BLM ID AML DIGITAL INVENTORY, was issued as a Firm, Fixed-Price solicitation by the Bureau of Land Management’s Idaho State Office under solicitation number 140L2626Q0045, with a target date for offers due on July 21, 2026. It was structured as a Total Small Business Set-Aside under NAICS Code 541370, exclusively available to small business concerns, requiring offerors to be active and registered in the System for Award Management with current, accurate representations and certifications. The contract aims to advance the Abandoned Mine Lands Program in Idaho through the use of LiDAR technology to digitally inventory, spatially document, field validate, and risk-rank AML features such as shafts, adits, waste rock dumps, mill tailings, and prospect pits, with final deliverables including an Abandoned Mines Feature spreadsheet and BLM-approved metadata aligned with national BLM data standards and the AMSCM schema. The period of performance runs from August 3, 2026, to June 30, 2027, with work to be performed at the Boise, Idaho office and in the field under standard working hours of 7:30 am to 5:30 pm Monday through Friday, excluding federal holidays, and any off-hours or weekend work must be pre-approved by the Contracting Officer. The evaluation process is based on best value trade-off methodology, with pass/fail gates for the ability to perform field work on time and RFQ compliance, followed by weighted consideration of technical capabilities, applicant qualifications, past performance, and price proposal, where unusually high or low pricing may lead to elimination. The contract requires adherence to numerous FAR clauses covering ethical conduct, whistleblower protections, labor standards including minimum wage and paid sick leave requirements, subcontracting restrictions, drug-free workplace policies, and accelerated payments to small business subcontractors. A detailed price and cost breakdown must be submitted separately from the technical proposal, and all payment requests are to be made electronically through the Treasury’s Internet Payment Platform System, with contractors required to enroll via the Federal Reserve Bank of Boston upon award. The Contracting Officer, Charles Dodson, holds sole authority for contract modifications, and a designated Contracting Officer’s Representative will monitor technical performance. Inspection and acceptance will be based on accuracy, conformity to standards, and timeliness of submissions. Additional requirements include compliance with security protocols involving Standard Form 3

Idaho State Office

POSTED

about 15 hours ago

DEADLINE

Environmental and Material Testing ServicesThe contract titled Environmental and Material Testing Services is a subcontract issued by the Texas Department of Transportation for comprehensive field and laboratory testing of concrete, soil, and asphalt materials to verify adherence to project specifications and industry standards. The solicitation was posted on July 21, 2026, with a response deadline of September 1, 2026, and is classified under NAICS code 541370, which pertains to architectural, engineering, and related services. Testing activities are expected to support infrastructure projects across Texas, with performance location details not specified in the public data. The contract aims to ensure material integrity and regulatory compliance throughout the construction lifecycle, requiring qualified vendors to deliver accurate, timely, and certified test results. All submissions must meet technical and procedural requirements set by the Texas Department of Transportation, though specific performance metrics or reporting formats are not detailed in the publicly available information.

Texas Department Of Transportation

POSTED

DEADLINE

in about 1 month

FAA-Compliant Unmanned Aircraft Systems (UAS) OperationsThe contract requires the execution of drone-based aerial surveys and environmental monitoring services in strict adherence to FAA regulations under 14 CFR Part 107 and all applicable federal airspace rules. The work involves operating unmanned aircraft systems to collect data for environmental assessment purposes, ensuring all flights are conducted safely, legally, and with proper authorization within controlled and unrestricted airspace. All operations must comply with federal aviation standards, including pilot certification, aircraft registration, flight limitations, and operational protocols to maintain regulatory compliance at all times. This is a subcontract opportunity issued under NAICS code 541370, associated with the Water Services agency in Arizona, with a response deadline of August 11, 2026. The specific location of performance is not detailed, but the work is expected to occur within jurisdictions governed by federal aviation authorities and likely involves field operations across diverse terrain in Arizona. Proposers must demonstrate technical capability in UAV operations, environmental data collection, and full compliance with FAA requirements, with no set-aside provisions specified. The contract is intended to support water resource management through accurate, timely aerial surveillance and monitoring services.

POSTED

DEADLINE

Construction Surveying and StakingThe contract encompasses surveying services essential for the construction of Lagoon Street improvements, specifically focusing on grading, alignment, and elevation control to ensure precise earthwork and infrastructure placement during the project phase. It is a subcontract under NAICS code 541370, indicating professional surveying and mapping services, and requires vendors to submit responses by August 4, 2026, with the opportunity posted on July 21, 2026. The work is to be performed in Utah, though specific municipal or geographic details are not provided in the data. The contracting entity is listed as Utah, with no designated office address or point of contact, and all submissions must be made through the provided online platform. No set-aside provisions or special socioeconomic preferences are indicated, meaning the opportunity is open to all qualified respondents without restriction.

POSTED

DEADLINE

Surveying and Topographic MappingThe City of Issaquah is seeking a subcontractor to conduct boundary, topographic, and as-built surveys to support the design and construction of a public park, requiring high-accuracy survey-grade data to ensure precise planning and execution. The work must meet professional standards for land surveying and deliver detailed mappings that inform infrastructure placement, drainage design, and compliance with local regulations. The solicitation is open for submissions with a response deadline of August 14, 2026, and falls under NAICS code 541370, which categorizes it as land subdivision and surveying services. The project is located in Washington State and is intended to support public realm improvements, with all deliverables tied to the successful development and buildout of park facilities. Subcontractors must be prepared to provide reliable, timely, and certified survey outputs aligned with municipal engineering and construction timelines.

City of Issaquah

POSTED

DEADLINE

Surveying and Layout ServicesThe contract entails comprehensive surveying and layout services for all project elements, including topographic surveying to establish precise terrain data, right-of-way verification to confirm legal boundaries and easements, and detailed construction layout to guide field execution. These services are critical for ensuring accurate alignment, compliance with land use regulations, and seamless integration of infrastructure elements during development. The work is issued as a subcontract under the NAICS code 541370 for surveying services, with the Defense Logistics Agency acting as the contracting authority under the Department of Defense. The solicitation was posted on July 21, 2026, and performance will occur at an unspecified location within the United States, with no set-aside designation or specific point of contact provided. All activities are governed by the general terms of the subcontract and must support the broader objectives of the parent contract managed by the DLA.

Defense Logistics Agency

POSTED

DEADLINE

Surveying and Site Analysis ServicesThe contract for Surveying and Site Analysis Services seeks a subcontractor to provide topographic and boundary surveying, site layout, and grading design services to support civil and structural engineering initiatives for a project in Columbus, Ohio. These services are essential for accurate land characterization, property line verification, and the development of site grading plans that align with engineering requirements, ensuring regulatory compliance and construction readiness. The work will directly enable the planning and execution phases of infrastructure or development projects under the City of Columbus’s jurisdiction. The solicitation is open as a subcontract opportunity with a response deadline of August 20, 2026, and is classified under NAICS code 541370, which pertains to surveying and mapping services. There is no set-aside designation or specific organization type restriction indicated, leaving the contract open to eligible subcontractors with the technical capacity to deliver precise geospatial and design services. While the agency’s office address and point of contact details are not provided, the place of performance is confirmed to be within Columbus, Ohio, and interested parties must submit responses through the designated BonfireHub portal by the stated deadline.

City Of Columbus

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

VALVE, CHECKA check valve with a 3.0 inch copper alloy body and flanged end connections, measuring 9.50 inches face to face nominal, is being procured under contract SPE7MC-26-T-144M by the Defense Logistics Agency. The item, identified by NSN 4820-01-272-7521 and part number 15-SW-F from William E Williams Valve Corp, is classified as a critical application item and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. The valve must not contain or come into direct contact with mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must be shock-proof and include a secondary containment barrier per NAVSEA 5100-003D. Two units are required with zero variance allowed, and delivery must be FOB destination within 20 days of contract award. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129 and no special markings specified. Palletization and unit packaging must follow designated standards, and the shipment is destined for USNS YUKON T-AO 202 at FPO AP 96686. The original required delivery date is July 20, 2026, and the contract enforces strict compliance with government procurement protocols including transportation and handling instructions as outlined in DLAD PROC NOTES C19 and C20.

Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

PARTS KIT, SOLENOIDThe contract pertains to a Parts Kit, Solenoid with NSN 4810-01-508-9312, issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-144T. Two identical units are required, each priced at $1.00, with a total quantity of two units delivered FOB origin within 20 days of the order. All items must be packaged in compliance with ASTM D3951 and labeled according to MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking absolute precedence over any other standards. Palletization must adhere to DLA Packaging Requirements for Procurement, and the Unit of Issue is listed as each (EA) with zero variance permitted in quantity. Inspection and acceptance occur at the destination point. Two distinct shipping addresses are specified: one for USS SOMERSET LPD 25 in FPO AP 96678 and another for USS ARLINGTON LPD 24 in FPO AE 09564, both requiring shipment via the fastest traceable means and explicitly prohibiting parcel post. Delivery is required by July 20, 2026, and the supplier must utilize the Vendor Shipping Module for freight coordination. Government-specific identifiers, tracking codes, and administrative data are included for internal use only, and compliance with all technical, packaging, and delivery directives is mandatory.

Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

WINDOW, OBSERVATIONThe contract specifies the procurement of one observation window, identified by NSN 9340-01-295-1753 and part number KS-24645, under solicitation SPE8E5-26-T-3671, issued by the Defense Logistics Agency. Delivery is required within five days of contract award to the destination FOB point, with no tolerance for quantity variance, and the item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards, including palletization per DLA packaging requirements. The window must be shipped to USS PATRIOT MCM 7 at FPO AP 96675, with transportation logistics governed by DLAD procedural notes C19 and C20, and no special markings are required beyond standard military compliance. The contract explicitly prohibits the intentional introduction of mercury or mercury-containing compounds into the product or its packaging, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents approved by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary as mandated by NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item is classified under NAICS code 327215, and all government-specific administrative, shipment, and compliance codes are included for official use, with the required delivery date set for July 10, 2026.

Glass Product Manufacturing Made of Purchased Glass

POSTED

about 10 hours ago

DEADLINE

VALVE, GLOBEThe contract specifies the procurement of five stainless steel globe valves with a 1/2 inch size, model number 57574 W03-2074B-15MS, manufactured by Velan Valve United States OPCO, Inc. The valves feature a bolted bonnet, stainless steel F347 construction, CF8M Stellite trim, and a 600 PSI swp rating, with the NSN 4820-00-590-8770. All components must strictly comply with the DLA Master List of Technical and Quality Requirements, which override any other standards including ASTM D3951. The valves are designated a critical application item and must not contain or come into direct contact with mercury or mercury-containing compounds, except for specific exempted uses such as batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA; portable devices containing mercury must meet additional shock-proof and secondary containment requirements per NAVSEA 5100-003D. Delivery is required FOB destination within 20 days of award, with no quantity variance permitted. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA Packaging Requirements, with palletization in compliance with specified standards and all items marked with the correct unit of issue and quantity per unit pack. The supplies must be delivered to the designated FPO address in Apalachicola, Florida, and shipping logistics are governed by DLAD Proc Note C19 and C20. The contract has a firm delivery date of April 25, 2025, with solicitation issued under SPE7MC-26-T-145A and a response deadline of August 3, 2026. The unit price is $5.00 per unit, totaling $25.00 for the full order of five valves. All vendor communications and fulfillment must reference the provided DLA vendor identification and project codes, with point of contact for inquiries listed as Marisa Thompson from the Defense Logistics Agency.

Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

VALVE, BALLThe contract specifies the procurement of one ball valve with NSN 4820-01-544-8819 and part number 76-508-01 from CONBRACO INDUSTRIES INC, under solicitation SPE7MC-26-T-144V. Delivery is required within 10 days of contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while strictly adhering to MIL-STD-129 labeling and DLA packaging requirements, with all technical and quality standards from the DLA Master List taking precedence. The item is to be palletized in accordance with RP001 and shipped via the fastest traceable method excluding parcel post to the designated military address at Fort Riley, Kansas. The required delivery date is July 20, 2026, and the contract includes specific government-use identifiers, a point of contact for inquiries, and links to official DLA systems for compliance and unit of issue verification.

Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

ATTACHMENT, COLLET HThe contract specifies the procurement of three units of Attachment Collet H under NSN 3460-00-042-4414, with a required delivery of 20 days from the award date and delivery terms set at FOB origin. Strict limitations are placed on the use of mercury or mercury-containing compounds, prohibiting any intentional addition or direct contact with the supplied hardware unless explicitly permitted for functional components such as batteries, fluorescent lights, sensors, control systems, weapon systems, or chemical analysis reagents authorized by NAVSEA. Portable devices containing mercury must be shock-proof and feature a secondary containment barrier as mandated by NAVSEA 5100-003D. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling requirements, with palletization governed by DLA’s RP001 packaging standards, and all DLA Master List of Technical and Quality Requirements supersede any conflicting ASTM provisions. Shipments must be sent via traceable freight to the designated Naval Undersea Warfare Center in Keyport, Washington, with parcel post strictly prohibited. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The contract references specific technical and quality requirements identified by R or I numbers from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The unit price is $3.00 per item, totaling $9.00, and the contract number is SPE8E5-26-T-3666, with a required delivery date of July 20, 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 10 hours ago

DEADLINE

VALVE, SAFETY RELIEFA safety relief valve rated at 0.375 inch and 5,000 PSI, subplate mounted for use with hydraulic fluid, is required under this contract, supplied by Parker-Hannifin Corporation with part number R4V03-535-10A1. The product must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition scale. Mercury and mercury-containing compounds are strictly prohibited except in specified exceptions such as batteries, fluorescent lights, instrument sensors, weapon systems, or Navy-approved chemical reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The item is identified by NSN 4820-01-572-9614, with a single unit required and delivery due within 20 days FOB origin. Inspection and acceptance occur at destination, with no variance allowed in quantity. Packaging must follow MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking codes applied. Palletization adheres to DLA packaging requirements, and shipping must occur via the fastest traceable means—parcel post is prohibited. The delivery destination is the USS Dwight D. Eisenhower CVN 69, FPO AE 09532, with transportation governed by DLAD Procurement Notes C19 and C20. The required delivery date is July 20, 2026, and the solicitation closed on August 3, 2026, under contract number SPE7MC-26-T-144R, administered by the Defense Logistics Agency.

Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

VALVE, REGULATING, FLThe contract specifies the procurement of one regulating fluid pressure valve with NSN 4820-01-507-0745 and part number 30804995 from Warren Controls, Inc., under solicitation SPE7MC-26-T-144U. Delivery is required within 20 days, FOB origin, with no tolerance for quantity variance. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including marking and labeling per MIL-STD-129 and palletization according to RP001. Mercury or mercury-containing compounds are explicitly prohibited from intentional addition or direct contact with the hardware, except for limited functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents; portable items containing mercury must include shockproof design and a secondary containment boundary as per NAVSEA 5100-003D. The valve must be shipped via the fastest traceable means, with parcel post strictly prohibited, to two distinct military vessel addresses: USS SOMERSET LPD 25 and USS ARLINGTON LPD 24, both under RDD 777 and project ZH9 TP 2. The contract mandates adherence to DLA packaging and procurement standards, and vendors must utilize the VSM system for freight shipping. The original required delivery date is July 20, 2026, with a solicitation response deadline of August 3, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

MARKER, IDENTIFICATIThis contract, issued under solicitation number SPE8E6-26-T-3817 by the Defense Logistics Agency, mandates the delivery of one unit of a Type I identification marker with a non-extendable shelf life of 12 months, identified by NSN 7690016685478 and part number 804-5959312 Rev C. The item must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 specifications, including special marking code 32 for shelf-life compliance. Palletization follows DLA packaging standards, shipment must bypass parcel post, and delivery is FOB destination in exactly 20 days with zero variance allowed. Two separate delivery points are specified: one for USS ESSEX LHD 2 at FPO AP 96643 and another for USS DWIGHT D EISENHOWER CVN 69 at FPO AE 09532, each requiring traceable transportation and specific military freight handling procedures. The contract enforces strict adherence to DLA procedural notes for vessel shipments and requires the vendor to use the Vendor Shipping Module for logistics coordination. The original required delivery date is July 20, 2026, and the item is subject to inspection and acceptance at the destination.

Commercial Printing (except Screen and Books)

POSTED

about 10 hours ago

DEADLINE

CONTAINER, DEPLOYABLE BThe contract solicitation is for a Deployable Container, designated as CONTAINER, DEPLOYABLE B with NSN 8145-01-591-7441, under purchase request 7015793832 for a quantity of one unit. The solicitation number is SPE8ED-26-Q-0607, issued by the Defense Logistics Agency under the Department of Defense, and was posted on July 22, 2026, with a response deadline of July 26, 2026. This is a federal procurement opportunity with no specified set-aside classification or NAICS code, indicating it is open to general competition. The place of performance and organization address details are unspecified, but the procurement is U.S.-based. Interested parties must submit responses prior to the deadline through the official DIBBS portal linked in the solicitation.

POSTED

about 10 hours ago

DEADLINE

LABELThe contract specifies the procurement of a blood group labeling product identified as "BLOOD GROUP B, RH POSITIVE" with precise dimensional and formatting requirements, including a black-on-white codabar and expiration date label measuring 1-7/8 by 1-7/8 inches nominal, compliant with the latest FDA Guidelines for the Uniform Labeling of Blood and Blood Components. The unit of issue is a roll of 250 labels, and bidders must clearly indicate the source and part number being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with control determined by the solicitation or award date depending on acquisition size, and the labeling must adhere fully to those referenced standards. The contract also notes that covered defense information may apply, and the delivery must be completed within 20 days after order. The solicitation, identified as SPE8E6-26-T-3824, is issued by the Defense Logistics Agency under the Department of Defense with a NAICS code of 323117 and a NSN of 7690-01-393-5085. The purchase request number is 7017574314, and only one roll is required. The place of performance is FPO with a zip code of 96632, and responses are due by August 3, 2026, with the solicitation posted on July 22, 2026. Primary point of contact is Tai Nguyen, reachable via email and phone, and additional details are accessible through the official DIBBS portal. All submissions must comply with DLA packaging and labeling mandates, including the removal of government identification from non-accepted supplies, and proper documentation of compliance must accompany bids.

POSTED

about 10 hours ago

DEADLINE

STEM, FLUID VALVEThis contract is for the procurement of a single STEM, FLUID VALVE with NSN 4810-01-516-3861 and part numbers 13182-4 and 56-12767-C27, supplied to meet strict military specifications under solicitation SPE7MC-26-T-144K. The item is classified as a critical application component and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Strict prohibitions apply: no ozone-depleting chemicals may be used in any part of the product, and mercury or mercury-containing compounds are forbidden unless specifically exempted for functional uses in batteries, instruments, or weapon systems approved by NAVSEA. Any mercury-containing portable lamps or instruments must be shock-proof and include secondary containment as per NAVSEA 5100-003D. All packaging must conform to MIL-STD-2073-1E with specific methods for preservation, wrapping, and unit containment, and labeling must follow MIL-STD-129 without special marking codes. The item must be delivered FOB destination within 20 days of contract award, with no variance in quantity allowed, and inspected and accepted at the destination. Delivery is to USS CHUNG HOON DDG 93 at FPO AP 96662, with transportation handled under DLA procedures C19 and C20. The contract requires full compliance with DoD unit of issue standards and includes a required delivery date of July 20, 2026, with solicitation response due by August 3, 2026, issued by the Defense Logistics Agency under NAICS code 332912.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE