Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Sustainable and Ethically Sourced Materials Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract obligates the supplier to provide component materials that are completely free from prohibited substances and fully compliant with sustainable sourcing standards as mandated by the Federal Acquisition Regulation and the Federal Acquisition Supply Chain Security Act. All materials must meet rigorous ethical and environmental criteria to ensure alignment with federal sustainability goals, emphasizing responsible supply chain practices throughout production and delivery. The subcontract falls under NAICS code 332996 and is administered by the Defense Logistics Agency under the Department of Defense, with performance expectations governed by federal compliance frameworks. The supplier is required to maintain documentation and verification processes to demonstrate ongoing adherence to these requirements, and failure to comply may result in contractual penalties or termination.

General Info

Supplier must provide compliant, ethically sourced materials meeting federal sustainability and security standards under DLA oversight.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-32R4.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NUT, SELF-LOCKING, CA

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 14

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure component materials are free from prohibited substances and comply with sustainable sourcing requirements under FAR and FASCSA.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7M3-26-T-9002

Solicitation SPE7M3-26-T-9002 is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 930 units of pipe plugs, identified by NSN 4730015085709. The requirement is issued under the First Destination Transportation program with shipping based on FOB Origin. The need ship date is October 17, 2026, with an original required delivery date of November 5, 2026, and a delivery lead time of 25 days after order. Inspection and acceptance will take place at the destination, specifically the New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and RP001 for palletization, with DLA Master List requirements taking precedence over ASTM D3951. Invoicing must be processed through the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American Act and the Berry Amendment, as well as DFARS cybersecurity standards for safeguarding covered defense information. Notably, the government will not evaluate or award contracts to offers utilizing additive manufacturing. A price evaluation preference is available for certified HUBZone small business concerns.

FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

47--PLUG,TUBE FITTING,T

Solicitation # SPE7M3-26-T-9067

Solicitation SPE7M3-26-T-9067 is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of threaded tube fitting plugs, NSN 4730012140258. The requirement consists of two line items totaling 98 units, with 41 units on line 0001 and 57 units on line 0002. This is a critical application item and a source controlled drawing item, with approved sources identified as RTX Corporation (P/N 169088-1) and Eaton Aerospace LLC (P/N A40). All items must meet the requirements of basic drawing 55820 169088, Revision C. The delivery period is 49 days after the award, with a need ship date of November 10, 2026, and a final required delivery date of January 18, 2027. Delivery is FOB Origin to DLA Distribution Cherry Point. Quality assurance requires the manufacturer's inspection system to comply with ISO 9001:2015, with sampling conducted per MIL-STD-1916 or ASQ H1331. Inspection and acceptance will occur at the origin per FAR 52.246-2. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Offerors must submit electronic quotes via the DIBBS system by September 21, 2026. The procurement falls under NAICS code 332996 and requires compliance with the Buy American Act, the Berry Amendment, and CMMC Level 2 certification. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system.

FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

27-116 Various Pipe, Coupling & End Sections

Solicitation # 27-116

The City of Augusta, Georgia, is soliciting bids for solicitation 27-116 to establish an annual contract for the provision of various High-Density Polyethylene (HDPE) pipe, couplings, and end sections for the Engineering and Environmental Services Department. These materials are required for the installation and maintenance of water diversion down drains on side slopes and must comply with Georgia Rules for Solid Waste Management and Georgia Erosion and Sedimentation Control Rules. The scope includes a wide range of single-walled and double-walled type S HDPE pipes ranging from 8 to 36 inches, as well as 45-degree elbows, 90-degree bends, and tees. Items will be ordered on an as-needed basis, with delivery required within 60 days of purchase. The successful bidder must agree that no additional shipping, delivery, tariff, or restocking fees will be charged to the city. Bids are due by September 29, 2026, at 11:00 a.m., and must include one original and one electronic version on USB. The award will be granted to the lowest responsive bid that meets all technical specifications, provided the bidder does not require a minimum order amount. A local bidder preference applies to projects of 100,000 dollars or less if the local bidder is within 10 percent or 10,000 dollars of the lowest non-local bidder. Required documentation includes business licenses, W-9s, E-Verify affidavits, and a non-collusion affidavit. Contract terms include a price escalation limit of three percent per item, requested 60 days prior to renewal, and a 30-day written notice requirement for termination. Bidders must also maintain liability and workman's compensation insurance and adhere to strict non-discrimination policies.

City of Augusta

POSTED

DEADLINE

Supply of Quick Disconnect Coupling Halves

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Titanium Alloy Tube Elbows (NSN 4730-00-271-9397)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Fluid Flow Restrictors (Orifice Plates)

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Pipe-to-Tube Unions (NSN 4730013078428)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Steel Cadmium Plated Pipe Seal Nuts

FLUID HANDLING DIVISION

POSTED

DEADLINE

Metal Tube Assembly (NSN 4710-01-213-8755) Supplier

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Steel Pipe Assemblies (P/N 5801689872)

LAND SUPPLY CHAIN

POSTED

DEADLINE

Metal Pipe Assembly Fabrication and Supply

FLUID HANDLING DIVISION

POSTED

DEADLINE

Metal Tube Assembly (NSN 4710014345202) Supplier

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

This contract, identified as SPE7L7-26-Q-2418, is a firm fixed price solicitation by the Defense Logistics Agency for the procurement of sealed lead acid storage batteries (NSN 6140-01-624-9682). The requirement consists of two line items totaling eight units, with delivery expected 60 days after the order. This is a restricted source item requiring government engineering source approval, and it is designated as a critical application item. The batteries have a non-extendable shelf life of 12 months and must comply with specific hazardous material communication and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Shipments are destined for locations in Oregon and Hawaii, with strict prohibitions against the intentional addition of mercury except where functionally required.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

This solicitation from the Defense Logistics Agency under the Department of Defense is for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The contract requires delivery within 60 days after receipt of the order. Strict compliance is required regarding cybersecurity and export controls. The provider must be a CMMC Level 2 Certified Third-Party Assessment Organization and adhere to regulations concerning Covered Defense Information. Additionally, the technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-26-Q-0498

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 10 hours ago

DEADLINE

GOVERNMENT FIT VERIFIC

Solicitation # SPE7L3-26-Q-1328

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

Solicitation SPE7L7-26-Q-2372 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for two uninterruptible power supplies, identified by NSN 6130-01-673-0176 and Motorola Solutions part number DSGXT4-1000RT120. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 60 days after order to the USS MARINETTE (LCS 25). Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items involve sealed lead acid batteries, the contractor must provide Material Safety Data Sheets per FED-STD-313 and comply with hazardous material shipping regulations under IP025. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Additionally, the contractor must complete a CMMC Level 2 self-assessment and utilize the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the point of origin.

POSTED

about 10 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-T-5218

The Defense Logistics Agency, through DLA Land and Maritime, has issued solicitation SPE7L7-26-T-5218 as a Request for Quotations for three storage batteries, identified by NSN 6140017137559. This procurement is a total small business set-aside under NAICS 335910, with a response deadline of September 21, 2026. The required hardware must meet the specifications for East Penn Manufacturing Co. part number 18-G75-21EE IST6G08-NAV1 and is designated as a critical application item. The items have a non-extendable shelf life of 12 months and must be delivered to NAVSUP FLC Yokosuka in Japan within 20 days after receipt of order. The contract requires strict adherence to packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, with specific labeling requirements for hazardous materials per the Hazard Communication Standard. Inspection and acceptance will occur at the destination. All quotes must be submitted electronically via the DIBBS system. The award process may utilize automated award and incorporates the HUBZone price evaluation preference. Compliance with various FAR and DFARS clauses is required, including those regarding cybersecurity safeguarding, the Berry Amendment, and the Buy American Act. Invoicing and payment must be processed through the Wide Area Workflow system.

Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

46--MODIFICATION KIT,WATER

Solicitation # SPE8E8-26-T-5568

Solicitation SPE8E8-26-T-5568 is a Request for Quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment office, for the procurement of two water treatment equipment modification kits under NSN 4610017148561. The requirement specifically references HDT Expeditionary Systems Inc part number T00012-5083-2. This is a total small business set-aside under NAICS 333310, with a response deadline of September 21, 2026. Delivery is required within 20 days after receipt of order, with the destination for inspection and acceptance located at Camp Pendleton, California. The procurement requires electronic submission of quotes via the DIBBS system. Contractors must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, and follow DLA packaging requirements RP001. Invoicing and payment must be processed through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Notably, the use of additive manufacturing for the supplied parts is prohibited unless specifically authorized.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-Q-2412

The Defense Logistics Agency, through DLA Land and Maritime, has issued Request for Quotations SPE7L7-26-Q-2412 for the procurement of 100 nickel-cadmium wet storage batteries (NSN 6140-01-241-2296). These batteries are specified as wet, discharged, and spillable, with a non-extendable shelf life of 36 months. Approved sources include Aerodesign, Inc. (P/N AD-31004-04C) and Marathonnorco Aerospace, Inc. (P/N 31004-04C). The items are to be delivered to the Royal Saudi Air Force within 60 days after the order date. This is a fixed-price solicitation where award will be based on the best value to the government, evaluating technical conformity, past performance, and offered delivery time. Because the batteries are classified as corrosive materials (UN2795), the contractor must strictly adhere to hazardous materials regulations, including ICAO, IMDG, 49 CFR, and AFJMAN 24-204. Packaging must comply with MIL-STD-2073-1E Level B, Pack Code Q, using 4G fiber-board boxes. Inspection will be conducted by DCMA at the distributor or OEM site, with acceptance occurring at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and strict cybersecurity reporting requirements under DFARS 252.204-7012. Quotes must be submitted electronically by the deadline of September 17, 2026.

Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

53--ANODE,CORROSION PREVEN

Solicitation # SPE4A6-26-Q-1423

The Defense Logistics Agency is soliciting quotes for the procurement of six corrosion prevention anodes under National Stock Number 5342013978773. This requirement is identified by solicitation number SPE4A6-26-Q-1423 and is designated as a total small business set-aside under NAICS code 332994. The approved source for this item is 6RDX4 W3T106427. Items must be delivered to DLA Distribution San Joaquin within 190 days after the order is placed. Interested responsible sources must submit their electronic quotes by the deadline of September 21, 2026. The solicitation is available exclusively online via the DIBBS portal, as no hard copies or separate technical drawings are provided.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Fluid Pressure Regulating Valves (NSN 4820014623023)

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS