Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SUTURE, NONABSORBABLE, S

Active
SPE2DS-26-T-270MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a nonabsorbable surgical suture made from polypropylene, designated as size 4-0, 18 inches long, single-armed, sterile, and colored blue, with a unit of issue of one box containing 12 individual units. The product is a replacement for NSN 6515-01-153-4753 and is intended for use across all medical acquisitions. The suture must comply with the Medical Marking Standard No. 1, superseding MIL-STD-129, and packaging must meet commercial standards to ensure protection from damage and safe delivery via common carrier at the lowest cost to the specified delivery point in Groton, Connecticut. The item has a non-extendable shelf life of 60 months and is classified as a Type I (Code S) item under shelf-life requirement RS001. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders are required to clearly state the source and part number being supplied, and the contracting action is under solicitation SPE2DS-26-T-270M with a response deadline of August 3, 2026. Delivery is due within five days of award, and the procuring organization is the Department of Defense’s Medical Supply Chain.

General Info

Procurement of one nonabsorbable suture via DLA, due August 3, 2026, through DIBBS portal.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

ATTN: SSN 801, GROTON, CT, 06340-4905, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-270M.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
JAMES BURKE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SUTURE,NONABSORBABLE,SURGICAL
SUTURE,NONABSORBABLE,SURGICAL,,,,
SUTURE NONABS PLASTIC POLYPROPYLENE SZ 4-0 18" L B2 3/8
CIR C3 RVS 12S SUTURE PROLENE/SURGILENE/SURGIPRO
SP683/342033 FS-2/C-13/CE-4/C6/DS18, SIZE 4-0, BLUE,
18 INCH LONG, SINGLE-ARMED, STERILE, 12S. REPLACEMENT
FOR NSN 6515-01-153-4753.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
UNIT OF ISSUE: BOX/12EACH
..
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
.. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SPE2DS-26-T-270M
SECTION B
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-610-6430 Quantity: 1 BX Purchase Request: 7017609845QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
DIBBS
COVER, ELECTRONIC COThis contract pertains to the procurement of one unit of a COVER, ELECTRONIC CO, identified by NSN 5895-01-576-0202 and part number G689188-1, under solicitation SPE7M8-26-T-5605. The item must be delivered within ten days to the designated receiving facility at Fort Irwin, California, with delivery terms FOB origin and zero variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951, while labeling and marking must strictly adhere to MIL-STD-129 as directed by DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards. Palletization follows RP001 DLA Packaging Requirements, and the Unit of Issue is EA with a Quantity per Unit Pack of 001. The shipment must be sent by the fastest traceable means excluding parcel post, and all packaging must include the required marks and references including the military freight designation W51WKX, RDD 555, Project TP 2, and supplier identification C. The Required Delivery Date is July 21, 2026, and the contract is governed by DLA’s official unit of issue guidelines, with technical and quality specifications sourced from the DLA Master List referenced in the solicitation. Only the DLA-authorized point of contact, Dondiego Boler, may be contacted for administrative or procedural inquiries.
ELECTRICAL DEVICES DIV

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334511
New
DIBBS
GLOVES, DISPOSABLEThe contract specifies the procurement of disposable nitrile rubber gloves in a Bear Claw Glove Kit configuration, sized large with a sand color, measuring 11.8 inches in length, featuring a beaded cuff, 8 mil thick fingertips, 6 mil thick palm, and 4.7 mil thick cuff. The gloves are designed for single-use only and are individually wrapped in pairs. Each unit of issue is a package containing 25 pairs, with a total quantity of five packages required. The product is identified by NSN 8415-01-600-0262 and must comply with DLA packaging requirements and technical quality standards outlined in the DLA Master List of Technical and Quality Requirements. The item is to be delivered within 20 days of award to Fort Campbell, with the procurement governed under solicitation SPE2DS-26-T-271P, issued on July 26, 2026, and requiring responses by August 3, 2026. The acquiring agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, and all non-accepted supplies must have government identification removed prior to return. The primary point of contact for inquiries is Tiffany Parker, reachable via email and phone.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
INDICATOR, CARBON MONOXThe contract pertains to the procurement of two units of a carbon monoxide indicator, part number BWC2-M25100, with NSN 6665200018480, for delivery to the USS STETHEM DDG 63. Delivery is required within 20 days to the destination FOB, with zero tolerance for quantity variance, and inspection and acceptance occur upon arrival. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months, extendable, and must comply with MIL-STD-2073-1E packaging standards, including labeling per MIL-STD-129. Packaging must meet DLA’s procurement requirements and include specific handling instructions for hazardous materials, as the device contains a lithium battery classified under HCC: ARTICLE, BATTERY, LITHIUM. Shipping must be by the fastest traceable means—parcel post is prohibited—and transportation procedures follow DLAD PROC NOTES C19 and C20. The product is subject to strict hazard communication protocols effective June 1, 2015, mandating submission of Safety Data Sheets and compliant HCS labels aligned with 29 C.F.R. 1910.1200, along with employee training on these requirements. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item, except for designated functional uses such as sensors or instruments as specified by NAVSEA, and portable fluorescent lamps or instruments containing mercury must feature shock-proof construction and a secondary containment boundary. All packaging, marking, and shipping must adhere to federal standards, and the vendor must conform to the DLA Master List of Technical and Quality Requirements referenced in the contract.
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334511
New
DIBBS
DRAPE, WOUND CAREThe contract is for the procurement of sterile disposable paper wound care drapes measuring 18 inches by 26 inches, supplied in packages of 300 units each. These drapes are designed to provide a sterile field and feature an inner repellent layer that prevents moisture strike-through, ensuring product integrity during medical use. The item is identified by NSN 6515-01-568-3821 with a single package quantity requested under purchase request 7017611382. Delivery is required within 20 days of award. The solicitation is issued under contract number SPE2DS-26-T-271N with a response deadline of August 3, 2026, and is managed by the Department of Defense’s Medical Supply Chain, specifically the MD Surg FSF office at Scott AFB, Illinois. Bidders must specify the source and part number being supplied and adhere to all technical, quality, and packaging requirements referenced in the DLA Master List of Technical and Quality Requirements, including the removal of government identification from non-accepted supplies. Covered defense information may apply, and all packaging must conform to DLA standards. Primary point of contact is Patrick Esposito, reachable via email and phone provided.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
INDICATOR SUBASSEMBThis contract pertains to the procurement of an Indicator Subassembly with NSN 5895-01-398-5145 and part number 85019000-03, issued under solicitation SPE4A0-26-T-4050 by the Defense Logistics Agency for the Department of Defense. Two line items are specified: one for a single unit priced at $1.00 and another for two units priced at $2.00 each, with both items requiring delivery within five days to designated military addresses in APO AE 09321 and Muwaffaq Salti Air Base, Jordan, under FOB destination terms. The contract enforces strict compliance with DLA’s Master List of Technical and Quality Requirements, which supersedes any conflicting standards such as ASTM D3951, and mandates packaging and labeling in accordance with MIL-STD-129 and MIL-STD-2073-1E, including standardized palletization under RP001. The items must be delivered with no variance in quantity, inspected and accepted at the destination, and marked with no special coding beyond standard requirements. Cybersecurity compliance is required through a CMMC Level 2 Self-Assessment, and the contractor must adhere to all government-specific shipping, logistics, and identification protocols, including parcel post and freight instructions tied to DLAD procedural notes. The original delivery deadline is July 22, 2026, with the solicitation issued on July 26, 2026, and responses due by August 3, 2026, under NAICS code 334511 for navigation and guidance system manufacturing.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
AIRWAY, NASOPHARYNGEThe contract specifies the procurement of 48 packages of nasal pharyngeal airways, each package containing ten individually sealed, sterile, latex-free devices measuring 9.3 mm in diameter and 125 mm in length. The product is designated by NSN 6515-01-560-6983 and must have a minimum shelf life of 24 months, with no more than three months elapsed between the manufacturer’s date and the delivery date to the government. Labeling requirements include the manufacturer date, expiration or retest date, contract number, and lot number, all compliant with the latest revision of MMS1A. The technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Bidders are required to clearly state the source and part number of the product being offered. The order is for delivery within 20 days of award to Fort Campbell, with a solicitation issued under SPE2DS-26-T-268V, response deadline set for August 3, 2026, and contact for inquiries is Brooke Webb of the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
MASK, RESPIRATORThis contract specifies the procurement of N95 healthcare particulate respirators, designated as MASK RESPIRATOR, with a unit of issue of one package containing twenty units each. The respirators must be fluid-resistant, sized for small fit, and have a non-extendable shelf life of sixty months, with a clearly marked use-by date in YYYY-MM-DD format on the packaging. No more than nine months may have elapsed between the date of manufacture and the date of delivery to the government. Packaging must comply with commercial standards as outlined in the procurement document, requiring each respirator to be sealed in a protective container and grouped in commercial exterior shipping containers suitable for safe transport at the lowest cost to the specified delivery point. All items must be marked in accordance with Medical Marking Standard No. 1, replacing any prior references to MIL-STD-129, and storage must occur in original packaging away from contamination, dust, sunlight, extreme temperatures, moisture, and harmful chemicals, within a range of -4°F to +86°F and not exceeding 80% relative humidity. The NSN is 6515-01-625-1847, with a single package quantity required, and delivery must be completed within five days after order award. The procurement is governed by the solicitation SPE2DS-26-T-270G, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with DLA packaging and technical requirements incorporated by reference, and all applicable standards subject to the version in effect on the solicitation or award date.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
SUTURE, ABSORBABLE, SURGThe contract is for the procurement of absorbable surgical sutures made from plastic glycolide-lactide copolymer, size 4-0, 27 inches in length, with a 3/8 circle taper point, supplied in boxes of 36 each. The item is identified by NSN 6515-01-604-1967 and has a non-extendable shelf life of 60 months, governed by the RS023 shelf-life requirement. All supplies must comply with the technical and quality standards enumerated in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA packaging specifications, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-270F, was posted on July 26, 2026, with a response deadline of August 3, 2026. The purchase request is for one box, with a required delivery within five days of award, and performance is to occur in Groton, Connecticut. The contracting activity falls under the Department of Defense, Medical Supply Chain, and all communications should be directed to the primary point of contact, Chandler Alvarez.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
CRUTCHCRUTCH ALUM YOUTH SZ ADJ 4'6"-5'2" is a specially designed youth-adjustable crutch made from double extruded aluminum with a reinforced center tube for enhanced load-bearing strength. The crutch features a patented I-beam center post that limits footpiece rotation to a precise 1.4 turn, ensuring the push-button adjustment remains visible and easily accessible at all times. Stability is improved through durable rivets that secure the aluminum tubing from the inside, eliminating the weaknesses associated with plastic connectors. A long, virtually unbreakable stair deflector enhances safety on stairs by preventing slippage and increasing stress tolerance across all angles without cracking. Non-skid rubber tips provide reliable traction, while a built-in metal ring reduces wear and extends service life. Each unit is fully assembled and packaged with all necessary components, requiring no user assembly. The product is sold as a pair and is identified by NSN 6515-01-577-4676 with a quantity of 10 pairs requested. It is subject to Department of Defense procurement requirements including technical and quality standards outlined in the DLA Master List, packaging specifications, and procedures for removing government identification from non-accepted supplies. The solicitation is issued under contract number SPE2DS-26-T-269E with a response deadline of August 3, 2026, and delivery must be completed within 84 days after order placement to APO 09227-0000.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
SUTURE, ABSORBABLE, SURGThis contract pertains to the procurement of absorbable surgical sutures composed of plastic glycolide-lactide copolymer, size 5-0, 18 inches in length, with a 3/8 circle taper point and 36 sutures per box, designated by NSN 6515-01-604-0118. The item is classified as a TYPE I (CODE S) item with a non-extendable shelf life of 60 months, and must comply with the DLA Master List of Technical and Quality Requirements referenced under RA001, which governs adherence to technical and quality standards applicable at the time of solicitation or award. Packaging must conform to DLA packaging requirements, and all supplies must be free of government identification if not accepted. Bidders are required to clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-270A on July 26, 2026, with a response deadline of August 3, 2026, is for a single box quantity and has a delivery requirement of 20 days after delivery order. The item falls under NAICS code 334511, indicating classification within the surgical and medical instrument manufacturing sector, and is procured by the Department of Defense through the Medical Supply Chain MD Surg FSF. Covered defense information may apply, and the offer must be submitted via the DIBBS portal. The contract is a federal solicitation with no set-aside designation, and the winning supplier must meet all specified performance, packaging, and quality criteria to ensure compatibility with military medical use.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
VALVE PORT, NEEDLE FREEThe item is a needle-free valve port designed for sterile, neutral displacement use with INVISION PLUS and TOUCH FREE systems, supplied in sterile peel pouches. Each package contains 200 units and is identified by NSN 6515-01-591-5707. The product has a mandatory 60-month shelf life that is non-extendable, and no more than nine months may have passed between the date of manufacture and the date of delivery to the government. Packaging must comply with DLA packaging requirements, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders must clearly state the source and part number being offered. The contract solicitation number is SPE2DS-26-T-268W, issued by the Department of Defense’s Medical Supply ChainMD Surg FSF, with a response deadline of August 3, 2026. Delivery is required within 20 days of award to Fort Bragg, North Carolina, 28310, and the primary point of contact is Dorothy Marquis.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
DETECTOR, RADIO FREQUENThe contract is for the procurement of six radio frequency detectors under NSN 5895-01-333-4378, with a delivery requirement of 362 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The supplier must comply with DLA packaging standards and satisfy inspection and acceptance requirements at origin, including the removal of government identification from non-accepted items and proper physical marking of the bare product. Cybersecurity compliance is mandated at CMMC Level 2 through a certified third-party assessment organization. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location; only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling export-controlled data, and formal authorization may access it. Documentation for source approval and handling of covered defense information is required, with DFARS 252.225-7048 governing data protection. The solicitation number is SPE4A7-26-T-595T, issued on July 26, 2026, with responses due by August 3, 2026, and performance is to be delivered to Tinker AFB, Oklahoma. The responsible point of contact is Grayson Andrews at grayson.andrews@dla.mil.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339113
New
DIBBS
ADMINISTRATION SET, INTThe contract specifies the procurement of a selectable drip intravenous administration set, identified by NSN 6515-01-652-5203, with a unit of issue being a package of 48 units. Each set includes three luer-activated Y-sites, an 82-inch extension set featuring two additional luer-activated Y-sites, an extra pinch clamp, and a spin lock, all supplied sterile. Packaging must comply with commercial standards as outlined in the procurement document, requiring each unit to be sealed in a protective container and shipped in suitable exterior packaging capable of surviving transport at the lowest cost to the delivery point in Waco, Texas, 76707-1019. All items must be marked in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and copies of the standard are available through DLA Troop Support. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Government identification must be removed from non-accepted supplies. The solicitation number is SPE2DS-26-T-273C, with a response deadline of August 3, 2026, and delivery required within 20 days after award. The contracting office is under the Department of Defense’s Medical Supply Chain, with Allen Costello listed as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
PAD, NONADHERENTThe contract specifies the procurement of sterile, nonadherent PADs measuring 3 inches by 8 inches, supplied in packages of 50 units each. Each pad is individually packaged with perforated plastic film covering on both sides, made from white cotton nonwoven material, and designed to remain sterile until use. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. Packaging must comply with commercial standards as outlined in the procurement document, requiring each unit to be sealed in a protective container and shipped in suitable exterior containers that ensure safe delivery by common carrier at the lowest cost. All items must be marked in accordance with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. The NSN is 6510-00-986-2942, with a quantity of four packages required and delivery due within 20 days of award. The solicitation is issued under SPE2DS-26-T-271X by the Department of Defense’s Medical Supply Chain, with Marc Canalichio as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 000000
New
DIBBS
BRACE, WRIST AND FOREARThis contract specifies the procurement of five units of a wrist and forearm brace with NSN 6515-01-738-5237 and manufacturer part number 79-87305, supplied by DJO LLC and Cardinal Health 200, LLC. The item is classified as a Class I medical device under FDA Regulation 890.3475, requiring compliance with registration, labeling, and GMP standards even if a 510(k) is not mandatory. The contract mandates strict adherence to DLA packaging standards, including MIL-STD-2073-1E for packing methods and Commercial Packaging as defined in medical procurement guidelines, with all units sealed in protective containers suitable for carrier transport. Medical Marking Standard No. 1 supersedes MIL-STD-129, and all packaging must be labeled accordingly to ensure proper identification and handling. Delivery is required FOB destination within five days of award, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The designated delivery and shipping address is Joint Base Pearl Harbor-Hickam, Hawaii, with specific tracking identifiers and transportation references provided. The solicitation number is SPE2DS-26-T-272P, with a response deadline of August 3, 2026, and the unit price is $5.00 per unit, totaling $25.00. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Covered Defense Information provisions may apply, and all bidders must be referred to the FDA product specialist via EBS with complete manufacturer and item details. Packaging must comply with DLA’s RP001 requirements and palletization standards, and all materials must be marked per Medical Marking Standard No. 1, obtainable through DLA Troop Support. The point of contact for inquiries is James Burke, and the procurement is managed under the Department of Defense’s Medical Supply Chain division.

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, HYPODERMICThe contract specifies the procurement of a 21-gauge hypodermic needle, unit of issue being a box of twelve, with a mandatory shelf life of 60 months from manufacture, no more than nine months of which may have elapsed by the time of delivery to the government. Packaging must comply with commercial standards as outlined in the procurement document, with each needle sealed in a protective unit container and grouped within robust shipping containers suitable for safe transport via common carrier at the lowest cost to the designated delivery point. All items must be marked in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129, and must include the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, contract or lot number, and the prefix “MFD” before the lot number and manufacture date. The product is regulated by the FDA, requiring a referral through EBS for confirmation prior to award. Packaging must meet ASTM D3951 but is subject to precedence by all DLA Master List of Technical and Quality Requirements, with palletization following RP001. The delivery is FOB destination within five days, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Shipments must not use parcel post and must be sent via the fastest traceable method to the specified government addresses, with detailed routing through the NMCS system and reference to the contract SPE2DS-26-T-270N and NSN 6515-01-660-3150. The required delivery date is July 28, 2026, and the contract is tied to specific manufacturers including Becton, Dickinson and Company, Medline Industries, LP, McKesson, and Tribalco LLC, each with their respective part numbers.
Surgical and Medical Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 322211
New
DIBBS
DRESSING, OCCLUSIVE,This contract specifies the procurement of occlusive chest wound seal dressings, designed as adhesive, translucent, latex-free products with hydrophilic gel adhesion and adhesive on one side, lacking a vent and packaged in a resealable protective container for backup sealing. Each unit of issue contains two dressings per package, and the item must maintain a non-extendable shelf life of 36 months, with no more than five months elapsed from the manufacturer’s date to the delivery date to the government. The item is subject to rigorous technical and quality requirements identified under R and I numbers in the DLA Master List, and packaging must comply with DLA standards. Government identification must be removed from non-accepted supplies, and the NSN 6510-01-581-0553 is being procured in a quantity of 10 packages under purchase request 7017617196, with delivery required within five days of award. The solicitation, issued under SPE2DS-26-T-272Z on July 26, 2026, with a response deadline of August 3, 2026, is managed by the Department of Defense’s Medical Supply Chain and will be performed at Fort Bragg, North Carolina, 28310. Primary point of contact is Tiffany Parker, reachable via email and phone provided.
Corrugated and Solid Fiber Box Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, DISPENSING, FThe contract specifies the procurement of two dispensing needles for fiber optic applications, designated by NSN 6515-01-532-2085, intended for medical use and tied to Purchase Request 7017611639. Each unit must be packaged commercially as outlined in the procurement documentation, with every complete unit enclosed in a sealed container capable of preventing damage or breakage. The units must be shipped in suitable commercial exterior containers that ensure safe delivery by common carriers at the lowest possible rate to the designated delivery point. All items must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must provide the source and part number being supplied. Technical and quality requirements referenced under RA001 are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must adhere to DLA’s procurement standards, and non-accepted supplies must have all government identification removed. The solicitation, issued under SPE2DS-26-T-272D, has a response deadline of August 3, 2026, with a required delivery timeline of 20 days after award, and is managed by the Department of Defense’s Medical Supply Chain under the primary point of contact Olusola Emmanuel.
Surgical and Medical Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
TUBE, SORBENTThe tube is a sorbent sampling device with XAD-2 sorbent material totaling 140/270 mg, housed in a glass tube measuring 75 mm in length with an outer diameter between 13 and 8 mm, divided into two sections. It includes a glass fiber filter, foam, and Teflon ring separators (FFGT), glass open ends, and a protective cover. Each unit is packaged in groups of ten per package, identified as one PG. The item is subject to strict packaging requirements under DLA standards, including commercial-grade sealed unit containers and shipping packaging capable of ensuring safe delivery at the lowest carrier rates, with labeling following Medical Marking Standard No. 1, which supersedes MIL-STD-129. Technical and quality specifications referenced in the DLA Master List govern the item’s compliance, and it is classified as a TYPE I (CODE H) item with a non-extendable shelf life of 12 months, meaning no more than one month may have passed from the date of manufacture to the date of government delivery. All packaging must clearly display the date of manufacture, expiration or retest date, and contract or lot number per the latest revision of MMS1C. The item is identified by NSN 6550-01-566-1504 and falls under solicitation SPE2DS-26-T-270D, with a delivery deadline of 20 days after award. Covered defense information may apply, and government identification must be removed from rejected supplies. The contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance to be conducted at Scott AFB, 62225-5252, and direct point of contact is Mary-Kathryn Donahue.
Family Planning Centers

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
BRUSH, BRISTLE, DENTAL HThe contract specifies the procurement of a dental handpiece bristle brush designed for polishing around the necks of teeth and embrasures between teeth of plastic dentures. The brush features a stiff bristle configuration with a disk diameter ranging from 0.719 to 0.781 inches and is mandrel-mounted, with each package containing twelve units. The item is identified by NSN 6520-01-056-7376 and is to be delivered in a single package quantity within twenty days of award. The solicitation number is SPE2DS-26-T-272J, with a response deadline of August 3, 2026, and a posted date of July 26, 2026. The procurement falls under NAICS code 339114 and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance occurring at Camp Lejeune, North Carolina. Bidders must clearly indicate the source and part number being offered. The contract incorporates technical and quality requirements from the DLA Master List, applies DLA packaging standards, and mandates the removal of government identification from non-accepted supplies. Covered defense information may apply, and all submissions must comply with federal acquisition protocols.
Dental Equipment and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
SYRINGE AND NEEDLE, HYPThe contract specifies the procurement of sterile, disposable, plastic hypodermic syringes with 23-gauge, 1-inch needles, each with a 3-milliliter capacity, packaged in quantities of 100 units per package. The item is identified by NSN 6515-00-149-1206, with a total order quantity of two packages. A shelf life of 60 months, non-extendable, applies under requirement RS001 for TYPE I items, and packaging must comply with DLA packaging standards. All technical and quality specifications referenced by R or I codes are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is subject to requirements for covered defense information and mandates the removal of government identification from non-accepted supplies. Bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-270C, was posted on July 26, 2026, with responses due by August 3, 2026, and delivery is required within five days of award to Groton, Connecticut, with the primary point of contact being Dorothy Marquis of the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
APRON, X-RAY PROTECTIVEThe contract is for two X-ray protective aprons, each designed as a sleeveless, form-fitting coat with tie tapes for secure closure. The aprons feature a lightweight back weighing 10 pounds and measure 38 inches in length and 24 inches in width. They must be constructed from lead-impregnated plastic or a combination of lead and tin impregnated plastic, providing radiation protection equivalent to a minimum of 0.5mm of pure lead. The unit of issue is each, and delivery is required within 10 days of award. The aprons must comply with DLA packaging requirements and all referenced technical and quality standards listed in the DLA Master List of Technical and Quality Requirements. The National Stock Number is 6532-00-935-9765, and the purchase request number is 7017612566. The solicitation, issued under contract SPE2DS-26-T-272F, is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance required at Fort Bliss, Texas. The primary point of contact is Tiffany Parker, reachable via phone and email provided. The response deadline for bids is August 3, 2026, and the solicitation was posted on July 26, 2026. Any non-accepted supplies must have government identification removed prior to return.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
SYRINGE AND NEEDLE, HYPThe contract specifies the procurement of sterile, disposable, safety-mode hypodermic syringes with integrated automatic needle retraction, each with a nominal length of one inch and a capacity of 0.5 cubic centimeters up to 3 cubic centimeters. The syringes must be non-toxic, non-pyrogenic, feature a solid dark color, and include a plunger designed not to depress prematurely. Each unit must be individually sealed in a protective container and packed in commercial shipping containers suitable for safe transport via common carrier to the delivery point, with packaging compliant with Medical Marking Standard No. 1, which replaces MIL-STD-129. The unit of issue is a package of 100 syringes, with a mandatory shelf life of 60 months and a restriction that no more than nine months may have passed between the manufacturer’s date and the delivery date to the government. Labeling must conform to the latest MMS1A standard, clearly indicating the manufacturer date, expiration or retest date, contract number, and lot number. The item is regulated by the FDA, and bidders must provide source and part number confirmation. The syringe is identified by NSN 6515-01-452-0465, with a total quantity of 10 packages requested under solicitation SPE2DS-26-T-272T, requiring delivery within 20 days of award to Luke AFB, Arizona. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. All packaging and marking must meet DLA’s stringent standards for military medical procurement.
Surgical and Medical Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details