Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SWITCH ASSEMBLY

Active
SPE7M8-26-T-6263Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, identified as SPE7M8-26-T-6263, is issued by the Department of Defense Electrical Devices Division for the procurement of 23 switch assemblies under NSN 5930-01-324-2220. The contract requires delivery within 209 days after the order is placed and is categorized under NAICS code 334419. Performance is designated for Texarkana, Texas. The agreement mandates strict adherence to several regulatory and quality standards, including CMMC Level 2 certification for third-party assessment and compliance with DLA packaging and quality requirements. Significant emphasis is placed on export control, as the technical data is subject to ITAR or EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DOD export-controlled data training. Additionally, the contract specifies requirements for configuration change management and inspection and acceptance at the point of origin.

General Info

DoD procurement of 23 switch assemblies for Texarkana, Texas, requiring CMMC Level 2.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, USA

Set-Aside

NONE

Documents

(1)

SPE7M8-26-T-6263.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ELECTRICAL DEVICES DIV
View Agency Profile
Office AddressUSA
Contacts
Dawn MacLean
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SWITCH ASSEMBLY
SWITCH ASSEMBLY
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
Tailored by excluding paragraph 7.3
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data
SPE7M8-26-T-6263
SECTION B
Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5930-01-324-2220 Quantity: 23 EA Purchase Request: 7013879871QTY: 23 Delivery: 209 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M8-26-T-6265
This contract is a solicitation for the procurement of six push switches, identified by NSN 5930-01-482-4952 and associated with DRS Naval Power Systems Inc. The agreement specifies a delivery timeframe of 63 days after order, with a required delivery date of July 19, 2026, and a need ship date of August 18, 2026. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and quality requirements, including MIL-STD-129 for marking and MIL-DTL-28786 for switch preservation. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. The items are classified as critical application items and must comply with the technical and quality requirements listed in the DLA Master List.
ELECTRICAL DEVICES DIV

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, POWE
Solicitation # SPE4A6-26-T-22QQ
This solicitation is for the procurement of 21 power cable assemblies, identified by NSN 6150-01-235-0423, with a required delivery timeframe of 65 days after receipt of order. The contract is set aside for Service-Disabled Veteran-Owned Small Businesses and is managed by the Department of Defense ASC Commodities Division. Compliance requirements include adherence to DLA packaging standards, inspection and acceptance at origin, and CMMC Level 2 certification. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access restricted data. Item Unique Identification is not required for this request.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M8-26-T-6264
This contract, identified as SPE7M8-26-T-6264, is a solicitation for the procurement of four sensitive switches, part number 2D3-05842 from Lake Shore Systems, Inc. The items are classified under NSN 5930-01-436-2509 and are designated as critical application items. Delivery is required within 92 days, with a need ship date of September 8, 2026, and a final delivery date of September 20, 2026. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and quality requirements, specifically citing MIL-STD-2073-1E and MIL-DTL-28786 for switches. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by specific systems. Marking must comply with MIL-STD-129, and the contract specifies that inspection and acceptance will occur at the destination.
ELECTRICAL DEVICES DIV

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
CRYSTAL UNIT, QUARTZ
Solicitation # SPE7M1-26-T-273P
This contract is for the procurement of four quartz crystal units under solicitation number SPE7M1-26-T-273P for the Department of Defense Maritime Supply Chain. The items are identified by NSN 5955-01-115-3022 and correspond to part number 13-49-45R9667B from Raytheon Company and XSIS Electronics Inc. Delivery is required within 161 days, with a need ship date of February 2, 2027, and an original required delivery date of August 25, 2027. The agreement specifies that shipping is FOB Origin, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements RP001. All supplies must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract also incorporates specific technical and quality requirements, including RA001 and RQ011, regarding the removal of government identification from non-accepted supplies.
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE7LX-26-U-9349
Solicitation SPE7LX-26-U-9349 is an Indefinite Delivery Contract issued by the Defense Logistics Agency (DLA) Land and Maritime, Strategic Acquisition Program Directorate, for the procurement of branched wiring harnesses (NSN 6150-01-369-6087). The requirement is for an estimated quantity of 460 units, with a contract maximum value of 350,000.00 dollars. Delivery is required 158 days after the date of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and labeling. Special requirements include a mandatory CMMC Level 2 Self-Assessment for cybersecurity compliance and the use of U.S.-flag vessels for ocean transportation. Invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. Proposals must be submitted via the DIBBS portal by August 24, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M2-26-T-6507
This solicitation, issued by the Department of Defense Nuclear Reactor Program under the Defense Logistics Agency, is for the procurement of two push switches identified by NSN 5930-01-452-5333. The contract requires delivery within 153 days after the order is placed and is associated with purchase request 7017882126. Performance is designated for New Cumberland, Pennsylvania, with a response deadline of September 8, 2026. The agreement is subject to several strict technical and quality requirements, including CMMC Level 2 certification and specific DLA packaging and configuration management standards. Notably, the technical data is subject to ITAR or EAR export controls, meaning it cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.
NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M8-26-T-6251
This contract is for the procurement of four push switches, identified by NSN 5930014315166 and part number 585133 from BRP US Inc. The agreement is managed by the Department of Defense Electrical Devices Division under solicitation number SPE7M8-26-T-6251. Delivery is required within 20 days after receipt of order, with a final required delivery date of August 28, 2026. The items are to be shipped FOB Origin to the Government of Israel Ministry of Defense. The contract mandates strict adherence to DLA packaging and quality requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional components like batteries or sensors as specified by NAVSEA. Inspection and acceptance will take place at the point of origin, and the quantity variance is set at plus or minus 0 percent.
ELECTRICAL DEVICES DIV

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M5-26-T-400M
The contract calls for the procurement of 30 units of a SWITCH, TOGGLE, identified by NSN 5930015607497 and part number 407-43105 from MASON ELECTRIC CO., with a unit price of $30.00 and a total contract value of $900.00. The item is classified as a commercial item, and delivery is required within 111 days from the award date, with an original required delivery date of December 24, 2026, and a need ship date of December 11, 2026. The goods must be delivered FOB Origin, though the actual delivery point is the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which take precedence over all other standards, including ASTM D3951 for commercial packaging. All packaging and labeling must comply with MIL-STD-129, and palletization must meet RP001 DLA packaging requirements. If the item is classified as hazardous under FED-STD-313, it must be labeled per the Hazard Communication Standard (29 CFR 1910.1200), and a Safety Data Sheet must be submitted prior to award; otherwise, commercial packaging per ASTM D3951 applies. The contractor must use Wide Area Workflow for payment submissions and comply with electronic invoicing and receiving report requirements. Cybersecurity obligations include adherence to NIST SP 800-171 DOD Assessment Requirements, safeguarding covered defense information, and registering with DLA’s AMPS system to access VSM and ship to DLA. The contract incorporates numerous FAR and DFARS clauses covering equal opportunity, combating trafficking in persons, employment verification, hazardous material identification, sustainable products, cybersecurity, export controls, and prohibitions on certain materials such as hexavalent chromium and covered defense telecommunications equipment. The solicitation is not set aside for small businesses, and offerors must comply with Buy American and Berry Amendment requirements, with the threshold now at $150,000. All quotations must be submitted via DIBBS by August
ACTIVE DEVICES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADIO F
Solicitation # SPE4A6-26-U-3312
The solicitation seeks a Small Business Set Aside for the procurement of 28 units of NSN 5995007606143, a radio frequency cable assembly, under a potential Automated Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, whichever comes first. The guaranteed minimum order is two units, with an estimated two orders per year, and deliveries will be directed to multiple DLA depots across CONUS and OCONUS via consolidated and containerized shipping points. All quotations must be submitted electronically through the SAM.gov portal by the deadline of August 21, 2026, and hard copies are not accepted. Digitized technical documentation including military specifications and drawings may be accessed online. The solicitation, identified as SPE4A626U3312, is issued by the Department of Defense’s DLA Aviation office based in Richmond, Virginia, and is restricted to small business concerns as defined by the SBA. Primary inquiries should be directed via email to the procurement representative listed in the solicitation’s additional information section, accessible through the provided SAM.gov link.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334419
New
DIBBS
DELAY LINE
Solicitation # SPE7M5-26-T-443Z
This contract, identified as solicitation SPE7M5-26-T-443Z, is for the procurement of four units of a delay line with NSN 5999013801519. The requirement involves specific part numbers from Getronics Government Solutions LLC and JBM Electronics Inc. Delivery is required within 10 days after order, with a required delivery date of August 24, 2026. The shipment is destined for the AV HHC SSA in Illesheim, Germany. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and RP001. Depending on the hazardous material status per FED-STD-313, items must be packaged according to either TQ requirement IP025 or ASTM D3951. The contract specifies that inspection and acceptance will occur at the destination, and the freight terms are FOB Origin.
ACTIVE DEVICES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A6-26-T-19BA
This contract is for the procurement of 13 units of Wiring Harness, BRAN, identified by NSN 6150014774847. The agreement specifies a delivery timeframe of 170 days, with a required delivery date of March 16, 2027, and a need ship date of February 12, 2027. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified. Technical and quality requirements are governed by the DLA Master List, and the quantity variance is set at plus or minus 0 percent.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334419
New
DIBBS
OSCILLATOR, CRYSTAL CON
Solicitation # SPE7M1-26-T-278B
Solicitation SPE7M1-26-T-278B is a full and open competition procurement issued by the Department of Defense Maritime Supply Chain for one crystal controlled oscillator, identified by NSN 5955-01-248-5964. The requirement specifies a need ship date of March 6, 2027, with delivery terms set as FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, including a CMMC Level 2 self-assessment and a prohibition on the use of class I ozone-depleting substances. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with specific verification levels and AQLs assigned for critical, major, and minor attributes. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively. Invoicing is required through the Wide Area WorkFlow system. The solicitation includes various FAR and DFARS clauses covering equal opportunity, combating trafficking in persons, and the safeguarding of covered defense information. Proposals must be submitted electronically via the DLA Internet Bid Board System by August 24, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → ELECTRICAL DEVICES DIV

Same awarding agency

NAICS: 335313
New
DIBBS
SWITCH SUBASSEMBLY
Solicitation # SPE7M8-26-T-5938
Solicitation SPE7M8-26-T-5938 is a request for quotations issued by the Department of Defense, DLA Land and Maritime Electrical Devices Division, for the procurement of two switch subassemblies under NSN 5930-01-274-1027. The requirement is categorized under NAICS code 335313, with a response deadline of August 21, 2026. Delivery is required 136 days after award on an FOB Origin basis, with inspection and acceptance occurring at the destination. Invoicing must be processed electronically through the Wide Area WorkFlow system. The contractor must adhere to strict technical and quality standards, including MIL-DTL-28786 for switch specifications and MIL-STD-2073-1E for packaging and preservation. Marking and labeling must comply with MIL-STD-129, including the use of 2D Data Matrix barcodes. Special requirements include the removal of government identification from non-accepted supplies and compliance with OSHA Hazard Communication Standards for any hazardous materials. Offerors are required to provide a complete data package for both approved and alternate parts and must submit all representations and certifications via the DIBBS portal.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 335314
New
DIBBS
SWITCH, FLOW
Solicitation # SPE7M8-26-T-6261
This solicitation, issued by the Department of Defense Electrical Devices Division, is for the procurement of eight flow switches under National Stock Number 5930-01-047-7019. The contract requires delivery within 107 days after the order is placed and specifies performance at Tinker AFB. The solicitation was posted on August 26, 2026, with a response deadline of September 8, 2026. The agreement incorporates specific technical and quality requirements as defined in the DLA Master List, including strict adherence to packaging requirements and the removal of government identification from any non-accepted supplies. Offerors are required to provide a complete data package for both approved and alternate parts. The primary point of contact for this acquisition is Dawn MacLean.
Relay and Industrial Control Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M8-26-T-6257
This solicitation from the Department of Defense Electrical Devices Division is for the procurement of 62 pressure switches, identified by NSN 5930-01-601-0974. The contract requires delivery within 156 days after receipt of the order and is categorized under NAICS code 335931. Performance is designated for New Cumberland, Pennsylvania. Compliance requirements are stringent, necessitating CMMC Level 2 certification via a C3PAO and adherence to Covered Defense Information standards. The contract is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be shared with foreign nationals without prior authorization. Additionally, the supplier must comply with DLA packaging requirements and the removal of government identification from non-accepted supplies.
Current-Carrying Wiring Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334512
New
DIBBS
SWITCH, THERMOSTATIC
Solicitation # SPE7M8-26-T-6260
This contract is for the procurement of 76 thermostatic switches, identified by NSN 5930-01-057-8257 and part number M24236/1-CLBHC. The items must adhere to technical specifications MIL-PRF-24236E and MIL-PRF-24236/1T. Delivery is required within 115 days after receipt of order, with a need ship date of November 4, 2025, and a final required delivery date of December 28, 2025. The shipment is destined for the DLA Distribution New Cumberland facility in Pennsylvania, with FOB origin terms. The agreement includes strict compliance requirements regarding environmental and security standards. The use of Class I ozone-depleting substances is prohibited without written approval, and the intentional addition of mercury or mercury-containing compounds is forbidden except for specific functional exceptions. The contractor must comply with DLA packaging requirements, MIL-STD-129 marking, and MIL-DTL-28786 preservation standards. Additionally, the contract mandates a CMMC Level 2 self-assessment and adherence to covered defense information and cybersecurity protocols.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M8-26-Q-0226
This contract is a solicitation for the procurement of 59 toggle switches, identified as commercial items with part number 973-0048 from Mason Electric Co. The agreement is established as a firm fixed price contract with a delivery requirement of 120 days after order. Inspection and acceptance will take place at the destination, with shipping handled as FOB Origin. The supplies are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must adhere to DLA packaging requirements and MIL-STD-129 for marking and labeling, with specific guidelines for hazardous and non-hazardous materials. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance.
Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M8-26-T-5925
This contract solicits 118 units of a sensitive switch, identified by NSN 5930-00-052-3260 and part number MS16106-3, to be delivered within 164 days under FOB origin terms to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must comply with MIL-PRF-8805K Revision K and MIL-PRF-8805/3M Revision M specifications and is subject to qualified products list or qualified manufacturers list requirements due to its critical application status. Mercury or mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking, except for specific functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, and NAVSEA-specified reagents, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary as per NAVSEA 5100-003D. Packaging and preservation must adhere to MIL-STD-2073-1E and ASTM-D3951 standards, while marking must follow MIL-STD-129 with no special marking required. The contract mandates destination inspection and acceptance, with electronic invoicing through WAWF system and adherence to DLA logistics protocols. Cybersecurity requirements under DFARS 252.204-7012 and DFARS 252.240-7997, including NIST SP 800-171 compliance, apply, alongside prohibitions on covered defense telecommunications equipment, hexavalent chromium, and hazardous material storage. The Buy American Act applies, and transportation by sea is governed by DFARS 252.247-7023. All submissions must be made via DIBBS by August 21, 2026, and offerors must provide valid representations regarding small business status, SAM certifications, and compliance with telecommunications restrictions. The contract includes clauses mandating whistleblower rights disclosure, cybersecurity incident reporting, labor equal opportunity, and restrictions on mandatory arbitration agreements.
Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 335313
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M8-26-T-6270
This contract, identified as SPE7M8-26-T-6270, is for the procurement of one pressure switch with NSN 5930016178223. The item is associated with Howell Laboratories Inc part numbers 8409-6502 and 8415-G501 Rev F. The delivery is required within 20 days after order, with a required delivery date of August 13, 2026. The shipment is destined for the USS Michael Monsoor DDG 1001 via the fastest traceable means, excluding parcel post. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under RP001 and MIL-STD-129. It explicitly prohibits the use of Class I ozone depleting chemicals and requires the removal of government identification from non-accepted supplies. Inspection and acceptance will occur at the destination, and the material is noted to have no shelf life requirement.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M8-26-T-6252
This solicitation from the Department of Defense Electrical Devices Division is for the procurement of one pressure switch, identified by NSN 5930-00-903-0783. The contract requires delivery within 160 days after the order is placed. It is categorized under NAICS code 335931 and is managed by the Defense Logistics Agency. The contract carries strict compliance requirements, including CMMC Level 2 certification for third-party assessment and the protection of covered defense information. It is subject to rigorous export controls under ITAR and EAR regulations, meaning technical data cannot be shared with foreign nationals without prior authorization. Additionally, contractors must adhere to DLA packaging requirements and maintain an approved US/Canada Joint Certification Program certification to access controlled technical data.
Current-Carrying Wiring Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335313
New
DIBBS
SWITCH ASSEMBLY
Solicitation # SPE7M8-26-T-6258
This contract is for the procurement of one Switch Assembly, identified by NSN 5930012727998 and Northrop Grumman part number 123SCAV342-11. The order is issued by the Department of Defense Electrical Devices Division under solicitation SPE7M8-26-T-6258. Delivery is required within 20 days after the order is placed, with a required delivery date of November 19, 2025. The shipment is designated as FOB Origin, with inspection and acceptance also occurring at the origin. The supplier must adhere to strict technical and quality standards, including DLA packaging requirements, MIL-STD-129 marking, and MIL-STD-2073-1E packaging data. Quality assurance is governed by zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Additionally, the contractor must comply with cybersecurity and data protection standards, specifically CMMC Level 2 self-assessment and covered defense information requirements. The final destination for the freight is the Materiel French Military Mission in France.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details