Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

SWITCH, LIQUID LEVEL

Active
SPE7M8-26-T-5653Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of a liquid level switch with NSN 5930-00-115-9569 and part number 22-150-01006, issued under solicitation SPE7M8-26-T-5653 as a total small business set-aside. Three units are required at a unit price of $3.00, with delivery scheduled in 448 days FOB origin, and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s master list of technical and quality requirements, superseding ASTM D3951 unless the item is non-hazardous, in which case commercial packaging per ASTM D3951 is acceptable with full adherence to MIL-STD-129 for marking and labeling. Hazardous material must be packaged per FED-STD-313 and TQ requirement IP025, with palletization strictly following RP001 DLA packaging requirements. The delivery destination is DLA Distribution’s New Cumberland facility in Pennsylvania, with a required ship date of November 2, 2027. The contract mandates configuration change control through engineering change proposals and variance requests, and removal of government identification from non-accepted supplies. The solicitation was posted July 30, 2026, with responses due by August 10, 2026, and is managed under the Department of Defense’s Electrical Devices Division, with Dondiego Boler designated as the primary point of contact.

General Info

Three liquid level switches at $3.00 each, delivery due November 2, 2027, to New Cumberland, PA, per DLA packaging and labeling rules.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

334513 - Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process VariablesView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ELECTRICAL DEVICES DIV
View Agency Profile
Office AddressUS

Full Description

Show more
SWITCH,LIQUID LEVEL
SWITCH, LIQUID LEVEL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CRITICAL APPLICATION ITEM
CENTROID, INC. 21856 P/N 22-150-01006
MISSION SYSTEMS DAVENPORT INC. 72429 P/N 22-150-01006
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017696040 0001 EA 3.000
NSN/MATERIAL:5930001159569
DELIVERY (IN DAYS):0448
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
SPE7M8-26-T-5653
SECTION B
PR: 7017696040 PRLI: 0001 CONT’D
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/02/2027 Original Required Delivery Date:11/02/2027
SPE7M8-26-T-5653 NSN/Part Number: 5930-00-115-9569 Quantity: 3 EA Purchase Request: 7017696040QTY: 3 Delivery: 448 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334513
New
DIBBS
INDICATOR, SCALE
Solicitation # SPE8E5-26-T-3514
The contract solicitation SPE8E5-26-T-3514, issued by the Defense Logistics Agency under the Department of Defense, seeks one unit of an industrial indicator and scale identified by NSN 5210-01-211-8749, to be delivered within 20 days of award to Naval Undersea Warfare Center Keyport in Washington State. The requirement follows simplified acquisition procedures and mandates strict adherence to packaging, marking, and labeling standards including ASTM D3951, MIL-STD-129, and DLA RP001, with the DLA Master List of Technical and Quality Requirements taking precedence over all other cited standards. The item is subject to export control regulations under ITAR or EAR, requiring contractors to hold JCP certification, complete DLA export control training, and comply with DFARS 252.225-7048 to handle technical data, which extends to foreign nationals and subsidiaries regardless of location. The contract incorporates multiple FAR and DFARS clauses addressing cybersecurity safeguarding, including the mandatory CMMC Level 2 certification for third-party assessors, safeguarding covered defense information per 252.204-7012, and NIST SP 800-171 assessment requirements, while also requiring compliance with employment eligibility verification, trafficking in persons prevention, equal opportunity, sustainable purchasing, and whistleblower protections. Payment must be processed electronically through WAWF using supported formats, and inspection and acceptance occur at the delivery point by the government. The solicitation demands current SAM.gov registration, UEI and CAGE codes, and socioeconomic certifications where applicable, with additional reporting obligations triggered by representations regarding covered defense telecommunications equipment. Contractors must submit proposals electronically via DIBBS by the deadline of July 16, 2026, ensuring full alignment with the DLA Master Solicitation Revision 105 and all referenced technical, quality, and regulatory requirements.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334513
New
DIBBS
TRANSDUCER, MOTIONAL
Solicitation # SPE4A5-26-T-317E
The contract is for the procurement of four transducers, motional, identified by NSN 6695-01-658-0277 and part number 929-0114-00, under solicitation SPE4A5-26-T-317E. Delivery is required FOB origin within 225 days of the contract award, with a specified need ship date of March 21, 2027, and no variance allowed in quantity. Inspection and acceptance occur at the destination, with packaging mandated to comply with MIL-STD-2073-1E and marking following MIL-STD-129. All packaging, preservation, and marking materials must be free of mercury or mercury compounds, except for functional uses in batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemical reagents as specifically authorized by NAVSEA; portable mercury-containing devices must include shockproof design and a secondary containment. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stated, and attributes must be verified at designated levels corresponding to AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor attributes respectively. The supplier must maintain CMMC Level 2 cybersecurity self-assessment compliance. The product must be delivered to DLA Dist San Joaquin at Tracy, California with no special marking required. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List current on the solicitation issue date, and the unit of issue is each (EA) as defined by DoD standards. The contract is managed by the Department of Defense, with primary point of contact Kayla Minor, and falls under NAICS code 334513 for instrumentation manufacturing.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
THERMOSTAT, FLOW CON
Solicitation # SPE4A7-26-T-603P
The contract is for the procurement of 83 thermostats with flow control, identified by NSN 6685-01-539-9588 and part number 5005440, under solicitation SPE4A7-26-T-603P. Delivery is required within 82 days to the destination warehouse in Tracy, California, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Packaging and preservation methods must adhere to DLA-specific requirements, including prohibition of mercury or mercury compounds in preservation, packaging, and labeling, except for functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, provided portable devices contain a secondary containment. The sampling plan for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The contractor must comply with all technical and quality requirements referenced in the DLA Master List, and the unit of issue is each (EA). The contract was posted on July 30, 2026, with responses due August 7, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with Lacresha Ellis as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
TRANSDUCER, MOTIONAL PI
Solicitation # SPE4A5-26-T-317P
This contract is for the procurement of three transducers, motional pickup, part number RPM51S from Hoffer Flow Controls Inc., identified by NSN 6695-01-693-6520, with delivery due in 197 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is classified as a critical application item, and all supplies must strictly comply with DLA’s packaging, marking, and preservation standards, including MIL-STD-2073-1E for preservation and MIL-STD-129 for labeling, with no special marking required. Packaging must adhere to DLA’s procurement requirements, and the shipment must be sent FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and sampling for quality assurance follows MIL-STD-1916 or an equivalent zero-based plan, with undefined attributes treated as major and acceptance requiring zero non-conformances unless specified otherwise. Mercury or mercury-containing compounds are prohibited in the item, its packaging, preservation, or marking, except for limited functional uses in batteries, sensors, or instruments specified by NAVSEA, which must include secondary containment and shock protection. Documentation and sourcing compliance require adherence to DLA’s master list of technical and quality requirements, and source approval requests must meet RC001 standards. The contract references DLA procedures for transportation, and all units of issue conform to DoD and ANSI standards. The required delivery date is February 21, 2027, with the solicitation issued in mid-2026 and responses due by August 7, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
TRANSDUCER, MOTIONAL
Solicitation # SPE4A5-26-R-0260
The contract specifies the procurement of 27 transducers, motional, identified by NSN 6695-01-673-0476 and part number D-4368-100, under solicitation SPE4A5-26-R-0260, with a firm fixed price and zero tolerance for quantity variance. Delivery is required within 206 days after award, with inspection and acceptance occurring at the destination, and shipment to be made FOB origin. Packaging and preservation must comply with MIL-STD-2073-1E using preservation method 10, with packaging materials and marking conforming to MIL-STD-129 and DLA Packaging Requirements (RP001). Mercury or mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking, except for specific functional applications in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA, with such exemptions requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Sampling and acceptance follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All items must be palletized according to RP001, with special marking code 00-00 indicating no additional special markings. Delivery is directed to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The contract is issued under the DoD authorized unit of issue with the requirement to cross-reference ANSI X12 equivalents. The technical and quality requirements referenced by R and I numbers are governed by the DLA Master List applicable as of the solicitation or award date.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → ELECTRICAL DEVICES DIV

Same awarding agency

NAICS: 334419
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M8-26-T-5445
This contract pertains to the procurement of a sensitive switch, identified by NSN 5930-01-050-7163 and part numbers 602EN109-RB and H11-1171, with a total quantity of 128 units to be delivered FOB origin within 492 days of the contract award. All supplies must strictly comply with the technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, which supersede standard commercial packaging guidelines such as ASTM D3951. The item is designated as a critical applications component, requiring adherence to exact specifications even if the referenced technical data is incomplete. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for specified functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents authorized by NAVSEA, with portable mercury-containing devices requiring shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging must follow DLA Packaging Requirements, including MIL-STD-129 labeling and palletization standards, and must comply with hazardous material regulations under FED-STD-313 and TQ requirement IP025 if applicable. Delivery is directed to DLA Distribution San Diego at the specified postal and freight address, with inspection and acceptance occurring at destination and no tolerance allowed for quantity variance. The solicitation is a total small business set-aside under NAICS code 334419, with a response deadline of July 30, 2026, and the original required delivery date set for December 5, 2027.
Other Electronic Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details