Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

SWITCH, PRESSURE

Active
SPE7M5-27-T-1795Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7M5-27-T-1795 is a small business set-aside request for quotation issued by the DLA Weapons Support Active Devices Division for the procurement of 11 pressure switches, identified by NSN 5930000711485. The items must be manufactured in accordance with Lockheed Drawing 3H90005-101 Rev B and are classified as critical application items. This is a source-controlled procurement, meaning only approved sources cited on the drawing are eligible to quote, and the government cannot provide the necessary limited rights data. A specific technical exception allows the substitution of Compound N888 for compound N304-75 and NM304-75 for o-ring production. Delivery is required within 129 days after the date of the order, with a need ship date of March 23, 2027, and a final required delivery date of April 18, 2028. Shipping is handled via the First Destination Transportation program with FOB Origin terms, and the destination for inspection and acceptance is DLA Distribution Warner Robins in Georgia. Packaging must comply with MIL-STD-129 and RP001, with specific requirements for hazardous materials per FED-STD-313 and IP025. Quality assurance will follow MIL-STD-1916 or ASQ H1331, and payment will be processed electronically through the Wide Area WorkFlow system. The contract incorporates various FAR and DFARS clauses, including strict requirements for cybersecurity, the Buy American Act, and prohibitions on covered defense telecommunications equipment.

General Info

Small business set-aside for 11 critical pressure switches for DLA Weapons Support.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION
Office AddressUSA
Contacts
Corey Carter
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SWITCH,PRESSURE
SWITCH,PRESSURE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM MUST BE MANUFACTURED IN ACCORDANCE
WITH THE LIMITED RIGHTS DATA LISTED. THE
GOVERNMENT CANNOT PROVIDE THE DATA. ONLY THOSE
VENDORS WHO HAVE ACCESS TO THE DATA SHOULD
QUOTE.
NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED
DRAWING AND AS OF THE DATE OF THIS SOLICITATION
ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE
BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED
PART NUMBERS ARE PROVIDED, THE ITEMS
FURNISHED MUST MEET THE REQUIREMENTS OF THE
CITED DRAWING. OFFERORS WHO ARE INTERESTED
IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF
FUTURE ACQUISITION MUST CONTACT THE
COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE
SOURCE CONTROLLED DRAWING.
ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES
THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT
THIS TIME.
THE TECHNICAL DATA CITED IN THIS SOLICITATION IS
NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST
MEET THE REQUIREMENTS OF THE CITED TECHNICAL
DATA IN ADDITION TO THE REQUIREMENTS OF THE
PART NUMBERED ITEM LISTED ON THIS SOLICITATION.
SPE7M5-27-T-1795
SECTION B
SOURCE CONTROL DRAWING
SOURCE CONTROL
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
SOURCE CONTROL DRAWING
NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED
DRAWING AND AS OF THE DATE OF THIS SOLICITATION
ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE
BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED
PART NUMBERS ARE PROVIDED, THE ITEMS
FURNISHED MUST MEET THE REQUIREMENTS OF THE
CITED DRAWING. OFFERORS WHO ARE INTERESTED IN
QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE
ACQUISITION MUST CONTACT THE COGNIZANT DESIGN
ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED
DRAWING.
ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES
THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT
THIS TIME.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Exception to Technical Data. Approval has been given to substitute Compound N888 for compound N304-75 and NM304-75 for o-ring production. POC contact@example.gov +1 (555) 000-0000
Item is to be IAW Lockheed (98897) Drawing 3H90005-101 Rev B
CRITICAL APPLICATION ITEM
HAYDON KERK MOTION SOLUTIONS, INC. 02005 P/N 15329 CUSTOM CONTROL SENSORS, LLC 09049 P/N 1G77 UNITED ELECTRIC CONTROLS CO 14314 P/N PM12M4
TDP Rev A Gen 3 IAW BASIC DRAWING NR 98897 3H90005 REVISION NR B DTD 04/22/1965 PART PIECE NUMBER: 3H90005-101
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018495304 0001 EA 11.000
NSN/MATERIAL:5930000711485
DELIVERY (IN DAYS):0129
DELIVER FOB: ORIGIN
SPE7M5-27-T-1795
SECTION B
PR: 7018495304 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:03/23/2027 Original Required Delivery Date:04/18/2028
SPE7M5-27-T-1795 NSN/Part Number: 5930-00-071-1485 Quantity: 11 EA Purchase Request: 7018495304QTY: 11 Delivery: 129 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
DIBBS
COUPLING ASSEMBLY, QUIC
Solicitation # SPE7M3-27-T-0813
Solicitation SPE7M3-27-T-0813, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of six quick disconnect coupling assemblies, specifically part number FEM-371-8FO from Hippo Power, LLC. The requirement is identified by NSN 4730-01-602-7479 under NAICS code 332919. Delivery is required within 151 days after the order, with a need ship date of April 14, 2027, and an original required delivery date of October 31, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Quotations must be submitted via the DLA Internet Bid Board System by November 13, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
NOZZLE, SPRAY, FLUID-EMU
Solicitation # SPE7M3-27-T-0808
Solicitation SPE7M3-27-T-0808 is a small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of 260 fluid-emulsion spray nozzles, identified by NSN 4730-01-466-9556. This critical application item is associated with the Combat Capabilities Development Command Chemical Biological Center and must be delivered to the DLA Distribution DDSP New Cumberland facility by April 24, 2027. The contract requires adherence to specific technical data packages, including Basic Drawing NR 81361 116-3-162 Revision G, and mandates that manufacturers maintain an inspection system complying with SAE AS9003 or ISO 9001. The contract imposes stringent quality and security requirements, including the necessity for a JCP certification to access export-controlled technical data subject to ITAR or EAR regulations. Quality assurance is managed through origin inspection and the authorization of Certificate of Conformance procedures, though contractor testing of 10 units is required for first article approval. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and Special Packaging Instruction P1163162. Additionally, the award is subject to CMMC Level 2 certification and DFARS safeguarding requirements for covered defense information. Payment and invoicing are to be processed electronically via the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
COUPLING, CLAMP, GROOVED
Solicitation # SPE4A7-27-R-0022
Solicitation SPE4A7-27-R-0022 is a request for proposal issued by the DLA Weapons Support ASC for an Indefinite Quantity Contract to supply Grooved Clamp Couplings, identified by NSN 5342-01-046-1421 and part numbers BACC10EY400BE or MVT68675-400. The contract features a five-year base period with an estimated annual demand of 925 units and a guaranteed minimum of 200 units. This is designated as a critical application item requiring strict adherence to technical drawing 81205 BACC10EY Revision V and higher-level quality standards such as ISO 9001-2015 or SAE AS9100. Delivery is required within 190 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Award will be based on best value, utilizing a trade-off process that evaluates adjusted price, past performance via the Supplier Performance Risk System, and the ability to meet surge and sustainment requirements. Contractors must maintain an approved US/Canada Joint Certification Program certification and comply with CMMC Level 2 cybersecurity requirements. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, respectively. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Additionally, the contract encourages the submission of value engineering change proposals to share in potential acquisition savings.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332919
New
DIBBS
GEARSHAFT, MULTIPLE GEA
Solicitation # SPE7L0-27-T-0054
Solicitation SPE7L0-27-T-0054 is a request for quotations issued by the DLA Weapons Support Land Supply Chain ESOC Buys for the procurement of 50 units of Gearshaft, Multiple Gears, identified by NSN 3040-00-678-4246. The contract is a total small business set-aside under NAICS code 332919, with delivery required within five days after receipt of the order. Performance is based on specific reference drawings and quality assurance plans, with delivery set as FOB Origin to the Anniston Army Depot in Alabama. Inspection and acceptance are both required at the point of origin, and the manufacturer's inspection system must comply with SAE standards at a minimum. The procurement incorporates stringent technical and quality requirements from the DLA Master List, including specific packaging standards per ASTM D3951 and marking requirements per MIL-STD-129. Key compliance mandates include the Buy American Act, the Berry Amendment, and CMMC Level 2 self-assessment. Additionally, the technical data is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and adherence to NIST SP 800-171 for safeguarding covered defense information.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
Federal
48--VALVE, SOL 3-WAY
Solicitation # N0010427RBB29
This firm-fixed-price solicitation, issued by the Navsup Weapon Systems Support Mech office in Mechanicsburg, Pennsylvania, is for the procurement of one 3-way solenoid valve (NSN 4810-01-603-3073). The award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations utilizing the Supplier Performance Risk System to assess item, price, and supplier risk. The contract is unrestricted and requires the offeror to provide pricing information from at least three recent similar sales. Technical compliance is governed by the Individual Repair Part Ordering Data and higher-level quality standard MIL-I-45208, with a strict prohibition on the intentional use of mercury. Packaging must adhere to MIL-STD-2073 and MIL-STD-129, with specific requirements for electrostatic discharge protection and unique item identification marking per MIL-STD-130. Delivery is on an FOB Destination basis, and inspection and acceptance will occur at the origin. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332919
New
Federal
48--ACTUATOR-ELECTRO ME, IN REPAIR/MODIFICATION OF
Solicitation # N0010427QLA22
This procurement action is a firm-fixed-price solicitation issued by the Navsup Weapon Systems Support Mech for the repair, teardown, evaluation, and modification of the Actuator-Electro ME. The government is seeking a single award based on a best-value determination, where past performance is weighted as more important than price. Evaluation of past performance may be conducted via the DoD Supplier Performance Risk System. The contract requires the contractor to meet specific operational and functional requirements associated with designated cage codes and reference numbers, with all work performed according to original manufacturer specifications and approved repair standards. Key operational requirements include mandatory Government Source Inspection and the use of the Commercial Asset Visibility system for reporting. The contractor must adhere to strict Repair Turnaround Times (RTAT), with failure to meet these timelines resulting in a per-unit monthly price reduction. All transportation is handled by the US Navy via the ATAC program, and invoicing is processed electronically through the Wide Area WorkFlow system. The solicitation also mandates compliance with various federal standards, including MIL-STD-130 for physical identification and MIL-STD-2073 for packaging. Quotations are due by November 16, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332919
New
Federal
48--VALVE,BUTTERFLY, IN REPAIR/MODIFICATION OF
Solicitation # N0038327QNA15
This solicitation, issued by Navsup Weapon Systems Support, requires the teardown, evaluation, repair, and modification of 10 butterfly valves (NSN 4820-01-472-9777) to return them to a Ready for Issue condition. The work is to be performed by Hamilton Sundstrand Corporation in Windsor Locks, Connecticut, with a delivery timeframe of 90 days. The contractor is responsible for providing all necessary labor, materials, and tooling, and must adhere to strict quality standards, including ISO 9001 or SAE AS9100 certification and calibration systems meeting ANSI/NCSL Z540.3 or ISO-10012-1. The contract is governed by the terms and conditions of BOA/LTC N0038322GZW01 and requires compliance with MIL-STD-130 for markings and MIL-STD-2073 for packaging. Key administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and receiving reports per DFARS 252.232-7006. The contractor must maintain detailed historical record files for each serial number and follow specific protocols for items determined to be Beyond Economical Repair, defined as repair costs exceeding 75 percent of the current production replacement price. Additionally, the contractor must notify DCMA regarding any items Missing on Induction and is prohibited from cannibalizing parts without specific approval from NAVSUP WSS and the BDE. Inspection and acceptance will occur at the origin, and the contractor must maintain a proper enclosed warehouse environment to prevent damage to assets awaiting repair or shipment.
Navsup Weapon Systems Support

POSTED

about 9 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332919
New
Federal
Valve Clapper
Solicitation # SPMYM327Q4003
Solicitation SPMYM3-27-Q-4003 is a total small business set-aside issued by DLA Maritime Portsmouth for the procurement of 12 units of 1-inch Valve Clapper Assemblies for the Portsmouth Naval Shipyard. This is a brand-name mandatory requirement for Emerson Automation Solutions part number S90051/300453, as these are direct replacement parts and equal-to submittals will not be accepted. The assembly must include a clapper, clapper pin, two clapper pin bushings, a clapper seal, and two bushing retaining rings, adhering to stock number 4820-LL-D00-0292 and drawing NS-4070 Rev D. The procurement is conducted under FAR Part 12 and FAR 13 Simplified Acquisition Procedures, with an award based on Lowest Price Technically Acceptable criteria and a required delivery date of December 3, 2026. Quotes must be submitted via email to Gary Chandler by November 12, 2026, and must include delivered prices FOB Destination and the country of origin for each line item. Packaging must comply with ASTM D-3951, prohibiting asbestos, excelsior, and loose-fill polystyrene for shipboard use, and requires two-dimensional bar-coded shipping labels via the DLA Vendor Shipment Module per MIL-STD-129. Inspection and acceptance will occur at the destination. Payment terms are Net 30 days after acceptance, with invoices submitted through Wide Area Workflow. The contract also incorporates specific security and compliance mandates, including DFARS 252.204-7012 for safeguarding unclassified controlled technical information and the Buy American Act.
DLA Maritime - Portsmouth

POSTED

about 9 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
Federal
VENT PLUG ASSEMBLY
Solicitation # N0010427QBB98
This fixed-price solicitation, number N00104-27-Q-BB98, is issued by NAVSUP WSS for the procurement of 18 units of Vent Plug Assembly (NIIN 014673540). The requirement is a total small business set-aside, and the award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer. Technical compliance is based on adherence to the instructions in Section L and the specifications detailed in the Individual Repair Part Ordering Data (IRPOD) and Technical Data Package version 007. The contract is awarded on an FOB Destination basis, with the offeror required to specify the delivery timeframe and pricing validity, typically 60 days. Key technical and quality requirements include compliance with MIL-STD-2073 and MIL-P-23199, specifically requiring the use of green poly bags and cleanliness standards as defined in the IRPOD. Inspection and acceptance will occur at the origin, and the contractor must maintain an acceptable inspection system with records available for government review. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and receiving reports. Additionally, the contract mandates adherence to the Buy American and Balance of Payments Program, cybersecurity safeguarding for covered defense information, and strict prohibitions against the intentional use of mercury in the hardware.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332919
New
Federal
VALVE,CHECK
Solicitation # N0010427QLA04
Solicitation N00104-27-Q-LA04 is a request for quotations issued by NAVSUP Weapon Systems Support Mech for the teardown, evaluation, repair, and modification of 42 check valves, NSN 4820-01-224-4688. The requirement was reduced from 46 units via Amendment 0001. The government requires a Repair Turnaround Time (RTAT) of 54 days, measured from the physical receipt of the asset to final government acceptance. Failure to meet the RTAT may result in a per-unit, per-month price reduction. The contract is a fixed-price effort requiring Government Source Inspection (GSI) and adherence to MIL-STD-130 for physical identification and MIL-STD-2073-1 for packaging. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Evaluation of past performance may include data from the DoD Supplier Performance Risk System (SPRS). Contractors must use the Wide Area Workflow (WAWF) system for invoicing and receiving reports. All repair work must meet the operational and functional requirements of CAGE Code 44674, Ref. No. CSP24-A04, and be performed according to approved manufacturer specifications and standard repair practices.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332919
New
Federal
ELBOWS AND STRAINERS
Solicitation # 70ZU0327P60308
CG-SEA-C23

POSTED

about 9 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332919
New
DIBBS
Supply of Thermal Sensor Temperature Resistors (NSN 5905-011956909)This subcontract, issued by the DLA Weapons Support Active Devices Division of the Department of Defense, requires the manufacture or procurement of six thermal sensor temperature resistors meeting NSN 5905-011956909 specifications. The selected provider must adhere to strict quality control standards per DLA Master List RA001, follow MIL-STD-129 for marking, and ensure packaging complies with MIL-STD-2073-1E and RP001. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332919, with the place of performance located in Tracy, California. Interested parties must submit their responses by November 12, 2026, to support prime contractors on these Defense Logistics Agency supply contracts.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 339999
New
DIBBS
ESD and EMI Protective Packaging SupplierThis subcontract involves the supply of electrostatic discharge and electromagnetic interference protective packaging materials for prime contractors supporting the Department of Defense DLA Weapons Support Active Devices Division. The supplier is responsible for providing certified materials that adhere to MIL-PRF-81705 standards, including specific cushioning requirements designed to prevent lead damage. All deliverables must maintain strict marking compliance in accordance with MIL-STD-129 and IPC/JEDEC J-STD-609. The performance of this contract is centered in Columbus, Ohio, under NAICS code 339999, with a response deadline set for November 13, 2026.
All Other Miscellaneous Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
Digital Microcircuit Supplier (NSN 5962011766687)This subcontract involves the supply of 25 verified digital microcircuits, specifically part number M38510/32501BSA, for the DLA Weapons Support Active Devices Division. The components must be sourced from QPL or QML approved sources and strictly adhere to MIL-PRF-38535M and MIL-M-38510/325D specifications. To ensure quality and security, the provider must maintain full supply chain traceability in accordance with DLAD Procurement Note C03 and provide all corresponding documentation upon delivery. The project is categorized under NAICS code 334413 and requires the supplier to complete a CMMC Level 2 self-assessment. Performance for this contract will take place in Columbus, Ohio. Interested parties must submit their responses by the deadline of November 13, 2026.
Semiconductor and Related Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332410
New
DIBBS
Supply of Electronic Shielding Gaskets (PN 19-00-12117-6307)
Power Boiler and Heat Exchanger Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
Supply of Electrical Connector Cable Clamps (NSN 5935-01-230-9338)This subcontract involves the supply of 187 electrical connector cable clamps for the Department of Defense, specifically the DLA Weapons Support Active Devices Division. The required components must conform to NSN 5935-01-230-9338 and match part numbers Glenair G7031-24NFG or Joslyn Sunbank S1725C28-34. All items must be packaged according to ASTM D3951 or IP025 standards and labeled in accordance with MIL-STD-129, with final delivery set as FOB Origin to Hill AFB, Utah. To be eligible for this contract, the provider must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. The project falls under NAICS code 335999, with a response deadline established for November 13, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333318
New
DIBBS
Supplier of Air Conditioning Filter Elements (NSN 4130016872719)
Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
Radio Frequency Interference Filter Supplier
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
MIL-SPEC ESD/EMI Protective PackagingThis subcontract for MIL-SPEC ESD/EMI Protective Packaging supports prime contractors delivering to the DLA Weapons Support Active Devices Division. The scope of work involves specialized packaging and labeling of sensitive electronic components in strict accordance with MIL-STD-2073-1E and MIL-STD-129. To ensure component integrity, the provider must utilize DoD-qualified ESD and EMI shielding materials that meet MIL-PRF-81705 standards and apply all markings as specified by the DLA Master List of Technical and Quality Requirements. The performance of these services will take place in North Little Rock, Arkansas, with final deliverables packaged and labeled for FOB Origin shipment. This opportunity falls under NAICS code 561910 and is managed by the Department of Defense. Interested parties should note the response deadline of November 13, 2026.
Packaging and Labeling Services

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
Supply of MIL-PRF-55182/1R Fixed Film ResistorsThis subcontract involves the supply of 1,000 QPL fixed film resistors, specifically part number RNC60J3483FS, for prime contractors supporting the DLA Weapons Support Active Devices Division. The components must be manufactured or sourced in strict accordance with MIL-PRF-55182/1R standards and require QPL certification. Additionally, the resistors must feature lead finish markings per IPC/JEDEC J-STD-609 and be entirely free of mercury or class I ozone-depleting substances. The contract falls under NAICS code 334416 and is managed by the Department of Defense. Performance for this requirement is designated for North Little Rock, Arkansas. Interested parties must adhere to the specified technical standards to ensure the components meet the rigorous requirements of the DLA Weapons Support Active Devices Division.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 485999
New
DIBBS
MIL-SPEC Packaging and Marking Services
All Other Transit and Ground Passenger Transportation

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
Electrical Coil Fabrication and Supply
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339999
New
DIBBS
DOD-Qualified ESD and EMI Protective Packaging MaterialsThis subcontract involves the supply of specialized protective packaging materials for prime contractors supporting the DLA Weapons Support Active Devices Division. The scope of work requires the provision of DOD qualified ESD shielding bags, EMI protective shielding, and cushioning materials designed to prevent electrostatic discharge and physical damage. All supplied materials must strictly adhere to MIL-PRF-81705 and MIL-STD-2073-1E standards, with the final delivery consisting of certified ESD and EMI packaging kits. The project is managed under the Department of Defense with performance taking place in Columbus, Ohio. Interested parties must note the response deadline of November 13, 2026. The contract is categorized under NAICS code 339999, focusing on the delivery of high-specification materials essential for the protection of sensitive active devices.
All Other Miscellaneous Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
Qualified Supplier of Memory Microcircuits (NSN 5962012783554)This subcontract involves the supply of memory microcircuits for prime contractors working on projects for the DLA Weapons Support Active Devices Division. The selected supplier is responsible for manufacturing 10 units of NSN 5962012783554 in accordance with Basic Drawing NR 67268 86020 Revision F. Key technical requirements include ensuring lead finish compliance with IPC/JEDEC J-STD-609 and providing full traceability through DLA Land and Maritime Form 918. To be eligible, the supplier must hold FSC 5962 qualified status and maintain CMMC Level 2 certification. The performance of this contract is centered in Columbus, Ohio, under NAICS code 334413. All delivered components must be accompanied by the required technical documentation to meet Department of Defense standards.
Semiconductor and Related Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332919
Awarded
DIBBS
48--VALVE ASSEMBLY,MANIFOLD
Solicitation # SPE7MC-26-T-271U
ALBANY TRANSPORTATION OFFICER

POSTED

about 9 hours ago

DEADLINE

N/A
View Details
NAICS: 332919
Awarded
DIBBS
48--COUPLING,ACTUATOR-H
Solicitation # SPE7M1-27-T-0245
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

N/A
View Details
NAICS: 332919
New
DIBBS
Supplier of Straight Pipe-to-Hose Adapter (NSN 4730015888617)
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
DIBBS
Supply of Valve Disks (NSN 4820015735942)
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS